Setting memory quota by process

hello

Trying again
Hello I have been looking for a way to change the memmory allocation within Solaris 10 so that I can quota the memory availiable for a process as at the moment have an application server which requires most of the memory on the box for one separate process but is being held back by a memory quota somewhere, I have been looking at the kernel tuning document but cannot seem to nail it down. Any help would be greatly appreciated as I am new to solaris.
Thank you

Similar Messages

Accessing WS data set during selection screen processing in BG processing

Hello ABAPers,
I am attempting to access a working storage table variable that is set during selection screen processing after the user submits the program to background processing (using F9).
I have tried using export to memory id in the at selection screen section and then import from memory id in the start-of-selection section, but it does not seem to work all of the time. Is there a better way of doing this?
Thanks

bump

How to check actual allocated and used memory for java process in solaris?

Hi,
I'm testing performance for java application on solaris 10. And I would like to know how to measure actual memory allocated and used for java process.
I'm setting -Xms512m -Xmx512m for my java process and I use prstat command to monitor it's memory. But I found that when I run prstat to check, in SIZE column is more than I setting (found 644).
So I'm don't know the actual memory that java process used. (In this case,is it mean the process use memory (644) more than setting (512)?)
Thank you.

With Xms/Xmx you specify the Java heap size. On top of that comes the permanent generation (default max size 64m) and the C part of the process (the JVM itself with all its libraries and data).
With "ps -e -o pid,vsz,rss,args" you get the virtual and set resident size of your processes.
Nick.

Can someone pl explain Quota arrangement process in MM?

Hi Folks,
I am new to MM, could someone pl explain the quota arrangement steps step by step anything with screen would be very helpful
for beginners like me with examples.
Also could some also pl tell me the Source priority in terms of Source of supply?
Thanks.
Steve

Dear,
Quota Arrangements :
In simple words: Distributing the requirements quantity between potential source of suppliers (Vendors) - basing on their order fulfillment capacity.
In business terminology:
Quota arrangements allow you to define target percentages and distribute them between two or more purchasing contracts. A quota arrangement ensures that a contract is guaranteed both a minimum sales volume and a percentage of the total purchasing volume of the product category or product. A quota arrangement has the highest priority in the sourcing process.
Quota Arrangements
Quota Arrangements means a mechanism enabling the system to compute which source of supply to assign to a requirement for a material.
If a material can be obtained from various sources of supply, each individual source of supply can be allocated a quota arrangement. The quota arrangement is valid for a certain period of time and specifies exactly how the receipts are to be distributed amongst each source of supply.
We can set the quota arrangement for in-house production as well as for external procurement. Setting quotas permits the automatic apportionment of a total material requirement over a period to different sources.
Sources of supply can be:
- an individual vendor or outline agreement
- another plant, from which material should be procured
- a production version
Quota Arrangement Usage
The quota arrangement facilitates the determination of the applicable sources of supply for the following at a certain time.
Purchase orders
Scheduling agreement delivery schedules
Planned orders
Purchase requisitions
Materials planning and control
In customizing activity, we specify for each material master record which quota arrangement rule is allowed. We group the usage combinations you have chosen under different keys.
We have to assign quota arrangement usage key to material master record in purchasing or MRP2 view (Maintaining Material Master Record T.Code MM01)
The quota arrangement usage determines whether a material is included in a quota arrangement and which operations lead to a quota arrangement.
We have to maintain the quota file for the material. Here we define the sequence of the sources of supply, the quotas per source of supply and numerous other parameters in the quota file.
Maintaining the Quota File
A quota arrangement file consists of quota arrangement records identifying the source (such as a vendor or an internal plant), the validity period, and the quota allocated to each source.
We can maintain the quota file. Following are the steps for maintaining this file.
T. Code: MEQ1
The initial screen for maintaining quota appears.
Enter the material number and the plant for the material that you want to use to maintain the quota file and choose. The header screen for maintaining quotas appears.
Enter the Valid to date for the quota arrangement item.
We can only define continuous validity periods for one material. In the first interval, the system sets the current date in the Valid from field. The Valid from dates of the other intervals are set continuously so that the day after the end date of the last quota item is set as the start date for the next item.
If we want to work with splitting quota arrangements, we will enter a minimum quantity here.
Double-click on the item to process.
The item screen now appears.
Here we will define the source of supply and other control parameters per item.
Allocating the source of supply to the quota item determines the procurement type that the procurement proposal receives. Therefore, we can specify via the quota arrangement that, for example, 75% of a material is produced in-house and the other 25% is procured externally.
Save entries.
Regards,
Syed Hussain.

Set memory cache - automated row fetch

I would like to know more about the difference between
Set Memory Cache On Display and
Set Memory Cache On Fetch
option, given in the Automated Row Fetch process.
I noticed that it makes a difference in some cases - especially where I have a master-detail relation and need to perform multiple drill down:
e.g. the report shows what was expected but export to .csv returns no rows. After switching from the default 'Set Memory Cache On Fetch' to 'Set Memory Cache On Display' everything works fine.
Where could I find something about this option?
Denes Kubicek

Denes - I'd need to see an example to explain it. It is not the behavior I would expect. Can you create a simple test case on htmldb.oracle.com? Please post the workspace name and app/page ID when you have it.
A bit more info: when the DML Fetch Mode is set to 'Set Memory Cache On Display', references to items sourced by the fetch, say &P1_ENAME., will not return the value that would be displayed in the form item P1_ENAME until after the code that emits P1_ENAME executes. So if your page had a before-header DML Fetch process that fetched a value for P1_ENAME (from EMP) and region A that displayed conditionally based on P1_ENAME = 'SMITH' and then region B containing the form item P1_ENAME and then region C that displayed conditionally based on P1_ENAME = 'JONES', the condition on region A would not see the fetched value of P1_ENAME but the condition on region C would see the value. However, if you set 'DML Fetch Mode to 'Set Memory Cache On Fetch', the condition in region A would see the fetched value.
When you have a csv link or chart region that references a value from session state, that value must have been committed to session state (which happens when you run a computation, do an explicit assignment or "select into" a bind variable associated with a page or application item, or when you submit a form) in order for the csv or chart page to access the current value.
Scott

Can I set up a review process in LiveCycle? Is what I want to do, at all possible? Anyone chime in.

What is the best way to set up a review process, without violating the EULA and having a form that is editable by the end user AFTER it is submitted.
Basically the process will go like this..
1. A user will log onto our website and click a link where he or she downloads a dynamic form.
2. The user will submit the form to multiple parties at once. (Conditional e-mail, depending on what sections in the form are filled out, different people will get the form)
3. The form will get reviewed, and if any changes need to be made, the person that originally filled out the form will need to get it back and make the necessary changes. (The forms are long, so they can't start from scratch).
4. After the changes have been made, the form will be re-submitted for final review.
5. After the form has been finalized, the completed form will be distributed to about 80 people within the company (attached to an e-mail or something) and these people will use the data within the form to populate what they need to.
Additional information:
-I am the only one that has Acrobat 9 Standard OR Professional.
-Everyone else has Reader only
-The forms are dynamic
-They have to be posted to a website
Is this at all possible? I can't figure out how this can be done.
I hope that was clear, please ask if you have questions.

Hi,
You can Reader Enable a form in Acrobat v9 Standard, however note the EULA with the restriction on 500 unique recipients. If it is going out to less than 500 you are not limited to the number of data processes that you undertake on the form.
See discussion here on Reader Enabling a form: http://assure.ly/etkFNU.
You would need to Reader Enable the form before you put it up on the web page.
You can script a regular button to submit the form to user-entered email addresses. See here: http://assure.ly/eUR4wJ. The first email button could be used to send out the form for review. The last section in the form could be a text field to allow reviewers to add comments and a second email button that would issued the amended form back to the originator for further action.
Both email buttons would get their email address(s) from completed fields in the form. In addition the email submission can be set up to return the PDF form and not just the data. IF the form is Reader Enabled then users with Reader will be able to complete this action.
Hope that helps,
Niall

How to set user quotas on a certain filesystem

Hi
It may be simple and easy question but I'm really new to this
I need to know how to set user quotas on a certain file system in details
I know it can be done easily in one step in Solaris ZFS
but how is it done in Linux ?
Thanks in Advance :)

See also:
How to set user quotas on a certain filesystem

Set deletion flag on process order.

Hi Friends,
My requirement is i want to set deletion flag on process order.
For this system gives error as
1. System status CRCR is active (ORD 93000112)
2. System status ORRQ is active (ORD 93000112)
Here i have solve the problem number one through transaction code BS22 (i.e. under System status I0241 -CRCR , previously LKZS - Set deletion indicator & LVMS -Mark for deletion was maintain as Forbidd now i have made it under No influence )
after saving this customization system give only error two ( System status ORRQ is active (ORD 93000112)
Same way when i try to find ORRQ but here i havenu2019t found ORRQ.
Could you plz help me.
Best Regards,
Parag Save.

Dear,
The system sets this status when you release the order, provided that the Order record required indicator is set in the order type-dependent parameters (see Customizing for Process Order)....
This setting is there in SPRO....
Production Planning for Process Industries - Process Order-Master Data-Order-Define Order type Dependent parameters...
In this you set the option Order record Required....
Requirements are that the process orders are settled, associated PI sheets, inspection lots and any linked purchase orders are complete.
Following are prerequisites for closing a process order
1 The order must have the status Released (REL) or Technically completed (TECO)
2 The order balance must be 0
3 There can be no open purchase requisitions, purchase orders.
4 There can be no future change records from confirmation processes.
.Now Calculate Overheads using Tcode : KGI2 - Individual Processing
CO43 - Collective Processing
Step to be follow,
1.Calculate WIP using Tcode : KKAX - Individual Processing
KKAO - Collective Processing
2.Calculate Variance by using Tcode : KKS2 - Individual Processing
KKS1 - Collective Processing
3.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
CO88 - Collective Processing
Please refer this thread also,
https://forums.sdn.sap.com/click.jspa?searchID=17422319&messageID=5934846
The transaction COA5 (Archive Administration Preprocessing).
This will allow you to set the deletion flag
Hope this helps.
Regards,
R.Brahmankar

Report error. Not enough memory to continue processing.

Good day.
I'm running a report script and after a few minutes, an error message pops up saying "Report error. Not enough memory to continue processing." May i know how to fix this?
The error code is 1001200
Thank in advance.

In the database settings try changing the buffer size and sort buffer size. remember to stop restart the server to ahve them take affect

REG : in which memory area BackGround process will execute??

hi everyone,
in which memory area , background process will be executed ?
Thanks and Regards,
Nikhil K

Hi,
i want to know if both SAP memory and ABAP memory are not present then in which area Background processes will be executed.
erm, they are always present. Processes do not execute "in" these 2 memories. I advise you to read some reference documentation: [SAP library: Functions of the SAP Memory Management System|http://help.sap.com/saphelp_nw70/helpdata/en/02/96279d538111d1891b0000e8322f96/frameset.htm]
The only difference I know between dialog and background is the sequence in which the roll, extended and heap memories are allocated.
Sandra

Using ABAP memory during IDOC processing

What are implications , issues of using ABAP memory in IDOC processing i.e. let say in inbound FM , I create implicit enhancement and I submit a report and return and pass data to this report via abap memory. What are implications ? Is it recommended to use this approach since many number of IDOCs are hitting the system and orders are getting posted.
Please suggest . Thanks in advance.

Hello Jürgen,
Thanks a lot for this OSS Note. So it seems the issue is some kind of a program error that requires source code correction. I am in process of getting this note applied in our SAP environment. Hopefully, it solves my problem. I will definitely keep you posted.
Thanks again for your quick help.
Regards,
EssKay

Environment variables not set by the install process

Hello,
Installed 11.5.10 on Redhat LIniux AS3.0
None of the env variables (like APPL_TOP, OA_HTML, AR_TOP etc.,) are set by the install process do I need to run a separate script to set these varibales?
Thanks

Hi guys,
I'm having exactly the same issues and more, when i try execute the *.env files i get a permission denied. Below is the output when running APPSORA.env
[oracle@linux prodappl]$ ./APPSORA.env
-bash: ./APPSORA.env: Permission denied
below i list the permission etc on the *.env files in the APPL_TOP
[oracle@linux prodappl]$ ls -l *.env
-rw-r--r-- 1 oracle oracle 989 Oct 8 08:22 APPSORA.env
-rw-r--r-- 1 oracle oracle 989 Oct 8 08:22 APPSPROD_linux.env
-rw-r--r-- 1 oracle oracle 9396 Oct 8 08:22 PROD.env
-rw-r--r-- 1 oracle oracle 9396 Oct 8 08:22 PROD_linux.env
I've tried to change the permissions on the files and running, even though they don't return a permission denied message i'm get the same problem as KAR. The environments are just not getting setting, if i tried cd $APPL_TOP i just get dumped into /oracle/home

How set hard quota to my site?

Hi all,
I am setting the disk quota as following.
if (siteTemplate.ToLower() != MySiteHostTemplate.ToLower())
Int64 i64DiskSpace = diskspace;
SPTlogger.Debug("diskSpace: " + i64DiskSpace.ToString());
i64DiskSpace = (i64DiskSpace * 1024) * 1024;
SPQuotaTemplate quotaTemplate = null;
try
quotaTemplate = GetSPTQuotaTemplateByStorageMaxLevel(i64DiskSpace);
if (quotaTemplate == null)
//we are not supporting storagewarninglevel; setting it 90% of storagemaxlevel
long storagewarninglevel = (i64DiskSpace * 90) / 100;
long storagemaxlevelMB = (i64DiskSpace / 1024) / 1024;
string templateName = string.Format("{0}({1}MB)", i64DiskSpace, storagemaxlevelMB);
quotaTemplate = CreateSPTQuotaTemplate(templateName, i64DiskSpace, storagewarninglevel);
if (Site != null)
Site.Quota = quotaTemplate;
catch (Exception ex)
SPTlogger.Error("-------------------------ERROR-------------------------");
SPTlogger.Error("Error while fetching quota template: " + ex.Message);
if (Site != null)
Site.Quota.StorageMaximumLevel = i64DiskSpace;
Site.Quota.StorageWarningLevel = (i64DiskSpace * 90) / 100;
// end setting disk quota template
if (Site != null) Site.Close();
It is setting the disk quota. however during file upload, larger file are also being uploaded. What is missing here?
Tnanks,
Moohak

Hi,
The following code snippet for your reference:
SPSite siteCollection = new SPSite("http://MySiteCollection");
SPQuota quota = siteCollection.Quota;
quota.StorageMaximumLevel = 5242880; //bytes
quota.StorageWarningLevel = 5242880; //bytes
siteCollection.Quota = quota;
I suggest you debug your code or provide more code(like the GetSPTQuotaTemplateByStorageMaxLevel
and CreateSPTQuotaTemplate methods) for further research.
More information:
http://www.c-sharpcorner.com/uploadfile/anavijai/quota-templates-in-sharepoint-2010/
http://reality-tech.com/2012/09/04/programatically-setting-site-quota-templates/
Best Regards
Dennis Guo
TechNet Community Support

Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP)

Hi All,
Have you come across any scenarios where the Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP) in Peoplesoft Time and Labor 9.0 application?
Thanks & Regards,
Allen

Hi All,
Have you come across any scenarios where the Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP) in Peoplesoft Time and Labor 9.0 application?
Thanks & Regards,
Allen

Setting site quota by using template or setting StorageMaximumLevel directly

we can set site quota by setting quota template, but I wondered if we can just set StorageMaximumLevel value directly in code, would that make too much difference? it seems using template is more like a standard way, is there any real benefits? even
though we can update the template, but it won't automatically update the site using the template.

try spsite.quota property.
try these links as referenc:
http://www.sharepointdiary.com/2012/05/site-collection-locks-in-sharepoint.html
http://dotnetbyexample.blogspot.in/2011/03/sharepoint-client-object-model-sites.html
https://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spsite.quota.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

Setting memory quota by process

Similar Messages

Maybe you are looking for