Setting NTP on 7835 with no key/key ID
How can you bypass the requirement for a key value in setting up NTP on the 7835? I would like to sync to my servers or the Navy's NTP servers but is fails stating the 'key value entry did not validate'. I cannot add keys because there are many 'clients' who pull from them now and I can't afford to cause any issues.
Try using a value of 1
NTP Server IP Address[x.x.x.x]:
NTP Key ID[1]:
NTP Key Value[1]:
Similar Messages
-
Control key is set for u2018Process manufacturing with Inspectionu2019
Hi,
Which control key is set for u2018Process manufacturing with Inspectionu2019?
What is the meaning of FS RelationshipHi,
Control Key for "Process manufacturing with Inspection" is PI02.
It is meant for Manufacturing is with Process Order with Quality inspection.
Further this Control key you need to set in CR01/CR02 -Default Values-> Operation Default Values----> Control Key
Regards,
Tejas
Edited by: Tejas Kantilal Pujara on May 21, 2008 8:54 AM -
I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
Re setting be re starting and pressing some keys, Can you help?I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
Re setting be re starting and pressing some keys, Can you help? -
Not happy with moving around keys on the timeline
I just changed from Final Cut to Premiere CS5.0 and I really like it. Working on a Macbook Pro i5 2.3GHZ, Mac OSX 10.7 But I am not happy with moving around on the timeline. I was used to using the up and down arrows to move to next video edit point, marker point or audio edit point. I tried everything to change it, highlighted the track etc. It only works together with the FN key, which is a bit uncomfortable. And then it definetely is not going to any audio edit points (very annoying!!!) and marker points (have to use Q and W keys). It makes me doubting if continuing with Premiere or not. Its such an esencial and easy to use tool while editing in a normal fast editing rythm. When I change it in the customize keyboard menu, into a Custom keyboard or FCP keyboard, it would ignore my changes on the arrowkeys, although it recognizes any other changes I do. Is it so complicate to change this issue in Premiere to how it is set in FCP? Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
You dont have to live with that at all if you are fixed only to what you have previously done.
It makes me doubting if continuing with Premiere or not.
There ya go! -
i am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
MRP Run with User Exit key for Follow up material
Dear Gurus,
I want to run MRP only for followup materials by using User exit key. For example i have a material X(with discontinued Indicator as 1) and it's follow material is Y.
So we have a user exit key as ZFL, with coding as shown below. Now when i run MD01 with user exit key ZFL and parametre as 1, it only runs MRP for material X and not for material Y. What else we need to do so that when i run MD01 with user exit key ZFL, it shoudl consider both X and Y.
WHEN 'ZFL'.
DATA : BEGIN OF ITAB5 OCCURS 0,
KZAUS LIKE MT61D-KZAUS,
END OF ITAB5.
TRANSLATE USER_PAR TO UPPER CASE.
SPLIT USER_PAR AT ',' INTO TABLE ITAB5.
IF ITAB5[] IS INITIAL.
EXIT.
ENDIF.
CLEAR: NO_PLANNING, STOP_PLANNING.
READ TABLE ITAB5 WITH KEY KZAUS = MT61D-KZAUS.
IF SY-SUBRC <> 0.
NO_PLANNING = 'X'.
ENDIF.Hi Kumar,
You can use either MRP Type, MRP Controller, MRP Group in this user exit to control the MRP run. For these set of Materials you have to assign any of same value or at least differentiate these material from other material. Then only you can control the MRP by using this user exit even though if you use different MRP Group and MRP Controller. In User Exit, you may have to add your dependent material's MRP Group/MRP Controller. Make sure that these set of materials are different than all other materials.
If you don't have any plan to run MRP for other materials then as per Ajit suggestion you make that material's MRP type as "ND". But, in your business case they may want to activate the MRP for all the material not now but may be latter.
Thanks -
Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Insert values of form on a table with compound primary keys in APEX
Good evening,
I have a table with compoud primay keys. On ER model I had a many to many relation and when I coverted to relational model I've got a table with the primary keys of the two entities.
My problem now is that I am trying to build an APEX application with a Form/Report and I want to insert a tuple both on the "entity" and on the table with two primary keys.
I created a trigger with
CREATE OR REPLACE TRIGGER ins_key_elem
INSTEAD OF INSERT
ON v_key_elem
REFERENCING NEW AS NEW
FOR EACH ROW
BEGIN
INSERT INTO elem_type (elem_key, type_key)
VALUES (:NEW.elem_key, :NEW.type_key);
INSERT INTO elem(elem_key, name)
VALUES (:NEW.elem_key, :NEW.name);
END;
Is that ok? If it is, now how I can use that trigger to do what I need? i.e. insert the tuple on the two tables when I use the create button of the form
Edited by: 934530 on May 15, 2012 2:36 PMNevermind...figured it out. Was able to set the value on the Report Attributes page.
-
URGENT: Issue with hierarchy level keys and report drill down
Hi,
BASIC STRUCTURE:
I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
GOAL:
All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
For example
For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
ISSUE:
The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
I have to fix this issue quickly. Please help me.Alastair,
All the fact tables have aggregated facts as sources.
I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
Time_Day (level set to day, table key is "day"),
Time_month (level set to month, table key is "Fiscal_Month_Code"),
Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
Time_Year(level set to year, table key is :Fiscal_Year_Code").
Note: No time week aggregate added as logical source.
Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
The levels keys set for each level are
Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
Day -> primary key set to day (date format)
Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
2009 2009 Q1 $10 $5
2009 2009 Q2 $20 $80
2009 2009 Q3 $20
2009 2009 Q4 $30
2010 2010 Q1 $100
2010 Q2 $101
2010 Q3 $102 $230
2010 Q4 $103
2011 Q1 $10
In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
Sorry about the long message but I thought you might notice something in how I have set up the keys.
Thanks -
Silent install application with varying license key (not with TS)
Hi guys
I want to deploy an application through sccm 2012 r2 with a license key in the command line. So far no problem, with the paramater
ISX_SERIALNUMBER="XXX" I can handle that. So command line looks like:
msiexec /i "XY.msi" ISX_SERIALNUMBER="XXX"
But here's the problem. That license key changes very often, usually a key can just be used for 2-3 installation. After that I get a new key which I have to use (we have no volume licensing... yes I know... do not ask...).
I tried to create a machine variable (device - properties - variables) with the license key. but I didn't manage to get the variable in the command line correctly. I tried
ISX_SERIALNUMBER="%variable%" but it didn't work. I realised that those variables just can be used with a TS. But I really don't want to use a TS for software deployments...
After that I thought I'll try to get the variable with powershell and it worked. But just with an Administrator account who has access to the server. If i run the script in system context while deploying, it fails...
Does anyone have another way to deploy Software with a Licence Key as a computer variable? Or any other way to specify a specific Licence key for a specific computer?
thanks in advance
p.s. I know I could entering it manually... but that's not an option at this time.I used the code in this link to achieve this in the past Worked very well.
http://www.windows-noob.com/forums/index.php?/topic/4853-deploying-software-with-unique-keys/
Basically you create a database to store your licences and it will update the fields to assign a computer object with the licence. Enter a column for Licences and one for Client. Set both to be type varchar(50) and allow for Null entries.
Cheers
Paul | sccmentor.wordpress.com
That is pretty cool :) -
How Put the computer to sleep with a "F key?
Hi,
How do you Put the computer to sleep with a "F key?
I do remember seeing a version of osX where there was a (say) "F2" key next to the Apple>Sleep pull down menu.
with 10.2.8 or 10.3.9 is there a way to set up a "F" key instead of using the pull down menu?
I looked into the system preferences> keyboard & mouse but no luck. The sys Pref> keyboard & mouse is different on 10.2.8 that on 10.3.9.
An neither one has an option to use an F key to put to sleep.
help!
MichelNot an F key command, but here's a keyboard command.
http://www.apple.com/pro/tips/quicksleep.html
Cheers, Tom -
I accidently deleted my url box at the top of safari. I believe I did this with the command key. Can anyone help me get it back? Thank you in advance!
Right click (cntl-click) on the top of the bar and select "customize toolbar". Drag the default set back in.
Regards,
Captfred -
Query with non partition key in partitioning table
i compare query select with non-partition key condition in table partition with 3, 4 and 6 partition.
time execution for 3 partition faster then 4 partition, time execution for 4 partition faster than 6 partition.
i know processing query select is selection all partition, but i don't know what make time execution different between 3, 4 and 6 partition??
whether the transfer from one partition to another partition takes time?
this example sql trace query select for 3,4 and 6 partition
3 partition
SELECT *
FROM
EQU_PARAM_MONITORINGHASH WHERE TO_CHAR(time_stamp,'mm/yy')=('02/09')
call cpu elapsed disk rows
Parse 0.00 0.00 0 0
Execute 0.00 0.00 0 0
Fetch 5.70 7.57 25291 1157583
total 5.70 7.57 25291 1157583
Parsing user id: 61 (SKENARIO1)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
0 PARTITION HASH (ALL) PARTITION: START=1 STOP=3
0 TABLE ACCESS MODE: ANALYZED (FULL) OF
'EQU_PARAM_MONITORINGHASH' (TABLE) PARTITION: START=1 STOP=34 partition
SELECT *
FROM
EQU_PARAM_MONITORINGHASH WHERE TO_CHAR(time_stamp,'mm/yy')=('02/09')
call cpu elapsed disk rows
Parse 0.00 0.00 0 0
Execute 0.00 0.00 0 0
Fetch 5.46 8.03 25126 1157583
total 5.46 8.03 25126 1157583
Parsing user id: 62 (SKENARIO2)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
0 PARTITION HASH (ALL) PARTITION: START=1 STOP=4
0 TABLE ACCESS MODE: ANALYZED (FULL) OF
'EQU_PARAM_MONITORINGHASH' (TABLE) PARTITION: START=1 STOP=46 partition
SELECT *
FROM
EQU_PARAM_MONITORINGHASH WHERE TO_CHAR(time_stamp,'mm/yy')=('02/09')
call cpu elapsed disk rows
Parse 0.00 0.00 0 0
Execute 0.00 0.00 0 0
Fetch 5.73 9.13 25190 1157583
total 5.73 9.13 25190 1157583
Parsing user id: 63 (SKENARIO3)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
0 PARTITION HASH (ALL) PARTITION: START=1 STOP=6
0 TABLE ACCESS MODE: ANALYZED (FULL) OF
'EQU_PARAM_MONITORINGHASH' (TABLE) PARTITION: START=1 STOP=6thanks
best regards
ekoekopur wrote:
i compare query select with non-partition key condition in table partition with 3, 4 and 6 partition.
time execution for 3 partition faster then 4 partition, time execution for 4 partition faster than 6 partition.
i know processing query select is selection all partition, but i don't know what make time execution different between 3, 4 and 6 partition??
whether the transfer from one partition to another partition takes time?
this example sql trace query select for 3,4 and 6 partition
3 partition
SELECT *
FROM
EQU_PARAM_MONITORINGHASH WHERE TO_CHAR(time_stamp,'mm/yy')=('02/09')
call cpu elapsed disk rows
Parse 0.00 0.00 0 0
Execute 0.00 0.00 0 0
Fetch 5.70 7.57 25291 1157583
total 5.70 7.57 25291 1157583
Parsing user id: 61 (SKENARIO1)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
0 PARTITION HASH (ALL) PARTITION: START=1 STOP=3
0 TABLE ACCESS MODE: ANALYZED (FULL) OF
'EQU_PARAM_MONITORINGHASH' (TABLE) PARTITION: START=1 STOP=34 partition
SELECT *
FROM
EQU_PARAM_MONITORINGHASH WHERE TO_CHAR(time_stamp,'mm/yy')=('02/09')
call cpu elapsed disk rows
Parse 0.00 0.00 0 0
Execute 0.00 0.00 0 0
Fetch 5.46 8.03 25126 1157583
total 5.46 8.03 25126 1157583
Parsing user id: 62 (SKENARIO2)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
0 PARTITION HASH (ALL) PARTITION: START=1 STOP=4
0 TABLE ACCESS MODE: ANALYZED (FULL) OF
'EQU_PARAM_MONITORINGHASH' (TABLE) PARTITION: START=1 STOP=46 partition
SELECT *
FROM
EQU_PARAM_MONITORINGHASH WHERE TO_CHAR(time_stamp,'mm/yy')=('02/09')
call cpu elapsed disk rows
Parse 0.00 0.00 0 0
Execute 0.00 0.00 0 0
Fetch 5.73 9.13 25190 1157583
total 5.73 9.13 25190 1157583
Parsing user id: 63 (SKENARIO3)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
0 PARTITION HASH (ALL) PARTITION: START=1 STOP=6
0 TABLE ACCESS MODE: ANALYZED (FULL) OF
'EQU_PARAM_MONITORINGHASH' (TABLE) PARTITION: START=1 STOP=6
I'm assuming you recreated the table a couple of times with different numbers of hash partitions. (Tip: always use a power of two for the number of hash partitions - it keeps them all around the same size if you are using the feature on an appropriate data set.)
There isn't really enough difference in time within the database to make any sensible comment about the difference in times. I note that you have also edited out the fetch count for the 1.1 million rows fetched, and have not captured (or perhaps just not printed) the wait times, so we don't know where you spent the time inside and outside the database.
For all we can tell, the difference you are worried about might simply be network time on the fetch calls, and have nothing to do with the extract you've published.
Regards
Jonathan Lewis -
Creating a view with a primary key
I want to create a view with a defined primary key. I understand
the view is created within a select statement, but do not
understand how you would define a particular field as a primary
key in the view. Also if your select statement attempts to build
the view and has duplicate keys in the select result set, what
would happen when the duplicate key is found? Would it just not
include the duplicate key in the view?
Thanks in advance for your help.
-PatI have a rather difficult problem with duplicate invoice numbers
contained in unique records. In other words I have many records
that appear as follows:
3593, 0004009090, CUSTOMER, TAX, 20000117,014011976-01
4411, 0004009090, CUSTOMER, TAX, 20000718,014011976-01
The last field is invoice number '014011976-01' In my case I am
building a flat file using UTL_FILE for loading into SAP
Business Warehouse. In SAP I need to have Invoice number as a
key in which case I can't have duplicate invoice numbers. All
the SQL I have tried to date returns a large amount of records
similar to the above records. I am selecting these records from
4 different schemas which represent 4 different companies. I
realize the data is the problem and that the vendor of the
product I am working with should not allow records with
duplicate invoice numbers, but I have to get the data loaded as
that is what they want and are paying for. So back to my View. I
was hoping to create a view and be able to work in the view to
remove duplicate records prior to writing them to a file. Any
suggestions are welcomed.
Thanks
-Pat -
How to save a record with null foreign key?
Dear all,
Most articles show non-nullable foreign keys; but now I've got a problem with nullable foreign keys.
With this simple example: an employee has zero or one manager.
in manager object:
@OneToMany(cascade={CascadeType.MERGE, CascadeType.PERSIST, CascadeType.REFRESH}, mappedBy="manager")
private Collection<Employee> employees;
in employee object:
@ManyToOne
@JoinColumn(name="manager_id")
private Manager manager;
when updating an employee record, i may use a selectOneMenu to pass a manager id of "0", I expect toplink to save a null manager_id in the employee record; but i tries to create a new manager object of id="0" (i.e. insert a new manager record instead)
the code i use to save an employee is like this:
em.getTransaction().begin();
em.merge(employee);
em.getTransaction().commit();
What's the correct way to save the employee record with a null manager_id column?
Could someone help?
Thanks a lot!
AKBut could you give me some pointers on how could I do
that from the web UI level?Got it. You want to select "nothing" and then set the object reference to that. I can't help you on JSF but how do you lookup the selected object behind the scenes? If you use entityManager.(Employee.class, 0) then you should get back null if there is no Employee with id=0.
--Shaun
Maybe you are looking for
-
What is or isn't possible on iOS? (Not having Loader, loadBytes(), external swfs, etc)
My basic question is: "What are the classes which we should not use for iOS using the packager." I have been trying for a few days trying to get a simple Flash app to run on the iPad. A very simple app (with sound!) with just 2 classes works fine (
-
Solution WebLogic 6.0 on Linux RedHat 7.1
Here's the link that helped me solve my installation problems. http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.support.install&item=7267&utag= Thanks Dude!!!
-
How can I add data into JTable, for instance ("Mike", "Gooler", 21).
-
Compressor No Service available for this computer
My compressions keep failing & I'm getting this error. No Service available for this computer. I'm using the newest update and Mavricks. I've deleted all computer groups.
-
Creative centrale can't play music files stored on Zen X-Fi.
<\I installed Creative Centrale, connected the player and it gets recognized alright, but for some reason I can't play the music files stored on it, is it normal? Centrale plays the files on PC just fine, but if I try to play the files on the player