Setting skill competency level

I have a simple configuration in UCCX 7.0 Premium.  There are 7 agents assigned each with a single CSQ and assigned a single skill, all at competency level 5. I want to prioritize them so some get the bulk of the calls.  I know how to change the CSQ from Longest Available to Most skilled. After that, when I go to each resource and change the Competence Level from 5 to any other number and Update it, it just goes back to 5.  The change won't stick.
Any ideas?
Thanks in advance!

Hi,
Can you please share how you fixed this ?

Similar Messages

  • Unable to set a top-level property object

    Hey guys
    I've made a little sequence to fetch data from a XML file. In that XML file, there is some informations (entries) (IP addresses, port numbers, etc) about 4 different types of devices(sections are the devices names). The first section of the XML tells me the NAMES of the devices I have to configure. The type of each device is located in the entries of each device. Each device has its own information and I can have more than one device of a type. In teststand, I've created custom data types (containers with empty fields) for each type of device I need.
    I want to dynamically create the devices that the XML file tells me to configure as fileglobal variables and populate them with their own config informations (entries of the XML file). I'm creating new fileglobal of the type I want using PropertyObject step and I'm creating an alias of that fileglobal that I'm passing in parameter to a subsequence who's getting infos from XML. Here, everything is OK.
    The problem occurs when I want to configure 2 or more objects of the same type. At the SetProperty step (where i'm creating the fileglobal variable) teststand gives me the error:
    "Unable to set a top-level property object to another object. Error accessing item 'Parameters.DeviceToInitStruct'."
    Is there any ways to avoid that problem and creating to variable of the same type ?
    thanks

    Hi
    I finally got rid of that problem.
    Instead of using a PropertyObject.Clone step, I used a statement who's just copy the "MasterObject" into a "CloneObject" and i'm working with that copy. So the sequence can now create devices of the same type without any conflict with the first device.
    i'll post here a short example to show how i did... maybe it'll be useful for someone...
    regards

  • Is there a way to set the default level of keyframe easing?

    I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence.  I'm having to adjust the easing of each keyframe individually. 
    Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor?  It would save a lot of time.

    No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
    http://www.adobe.com/go/wish

  • Setting transaction isolation level in Weblogic 5.1

              Hi,
              I'm using Weblogic server5.1 and i'm trying to set the isolation level on one
              of my session bean. Below is the code :
              <weblogic-ejb-jar>
              <weblogic-enterprise-bean>
              <ejb-name>chargeMgr</ejb-name>
              <jndi-name>chargeMgr</jndi-name>
              <transaction-isolation>
              <isolation-level>Serializable</isolation-level>
              <method>
              <ejb-name>chargeMgr</ejb-name>
              <method-intf>Remote</method-intf>
              <method-name>*</method-name>
              </method>
              </transaction-isolation>
              </weblogic-enterprise-bean>
              </weblogic-ejb-jar>
              I have checked the syntax against the weblogic documentation.
              However, when i try to jar the beans up into the jar file (weblogic.ejbc), it
              give me the following error :
              org.xml.sax.SAXParseException: Element "weblogic-enterprise-bean" allows no further
              input; "transaction-isolation" is not allowed.
              Can anyone help?
              Regards.
              

    yes, only in weblogic-ejb-jar.xml , and you can see that from the DTD
              source.
              thanks
              Yu
              "cw lee" <[email protected]> wrote in message
              news:[email protected]...
              >
              > thanks for ur advice.
              >
              > one thing i forgot to mention is that the isolation-level was specified in
              weblogic-ejb-jar.xml.
              > Do u mean that it must be placed in weblogic-cmp-rdbms-jar.xml and not
              weblogic-ejb-jar.xml
              > ?
              >
              > Are the codes u suggested to be in weblogic-ejb-jar.xml or
              weblogic-cmp-rdbms-jar.xml
              > ?
              >
              > Regards.
              >
              >
              >
              > "Yu Tian" <[email protected]> wrote:
              > >the right name for Seriealizable should be: TRANSACTION_SERIALIZABLE.
              > >so the
              > >DD looks like:
              > >
              > ><?xml version="1.0"?>
              > >
              > ><!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic
              > >5.1.0
              > >EJB//EN' 'http://www.bea.com/servers/wls510/dtd/weblogic-ejb-jar.dtd'>
              > >
              > ><weblogic-ejb-jar>
              > > <weblogic-enterprise-bean>
              > > <ejb-name>containerManaged</ejb-name>
              > > <caching-descriptor>
              > > <max-beans-in-cache>1000</max-beans-in-cache>
              > > </caching-descriptor>
              > > <persistence-descriptor>
              > > <persistence-type>
              > > <type-identifier>WebLogic_CMP_RDBMS</type-identifier>
              > > <type-version>5.1.0</type-version>
              > > <type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
              > > </persistence-type>
              > > <persistence-use>
              > > <type-identifier>WebLogic_CMP_RDBMS</type-identifier>
              > > <type-version>5.1.0</type-version>
              > > </persistence-use>
              > > </persistence-descriptor>
              > > <jndi-name>containerManaged.AccountHome</jndi-name>
              > > <transaction-isolation>
              > > <isolation-level>TRANSACTION_SERIALIZABLE</isolation-level>
              > > <method>
              > > <ejb-name>containerManaged</ejb-name>
              > > <method-name>*</method-name>
              > > </method>
              > > </transaction-isolation>
              > > </weblogic-enterprise-bean>
              > > </weblogic-ejb-jar>
              > >
              > >Thanks
              > >
              > >Yu
              > >
              > >
              > >"cw lee" <[email protected]> wrote in message
              > >news:[email protected]...
              > >>
              > >> Hi,
              > >>
              > >> I'm using Weblogic server5.1 and i'm trying to set the isolation level
              > >on
              > >one
              > >> of my session bean. Below is the code :
              > >>
              > >> <weblogic-ejb-jar>
              > >> <weblogic-enterprise-bean>
              > >> <ejb-name>chargeMgr</ejb-name>
              > >> <jndi-name>chargeMgr</jndi-name>
              > >> <transaction-isolation>
              > >> <isolation-level>Serializable</isolation-level>
              > >> <method>
              > >> <ejb-name>chargeMgr</ejb-name>
              > >> <method-intf>Remote</method-intf>
              > >> <method-name>*</method-name>
              > >> </method>
              > >> </transaction-isolation>
              > >> </weblogic-enterprise-bean>
              > >> </weblogic-ejb-jar>
              > >>
              > >> I have checked the syntax against the weblogic documentation.
              > >> However, when i try to jar the beans up into the jar file
              (weblogic.ejbc),
              > >it
              > >> give me the following error :
              > >>
              > >> org.xml.sax.SAXParseException: Element "weblogic-enterprise-bean"
              allows
              > >no further
              > >> input; "transaction-isolation" is not allowed.
              > >>
              > >> Can anyone help?
              > >>
              > >> Regards.
              > >>
              > >
              > >
              >
              

  • Setting the isolation level in Toplink or in my EJB beans?

    Hi,
    Seems like you can set the isolation levels in both Toplink and in the deployment descriptor of your ejb project.
    What is the recommended place to specify the isolation level settings?
    With kind regards.

    Hi,
    Seems like you can set the isolation levels in both Toplink and in the deployment descriptor of your ejb project.
    What is the recommended place to specify the isolation level settings?
    With kind regards.

  • How can I check and change the system set events trace level?

    Dear all:
    How can I check the system set events trace level? I don't want the alert_log so big.
    Regards
    Terry

    Hi Terry;
    Please check :
    How to determine which system events are currently being set? [ID 845043.1]
    How To List All The Named Events Set For A Database [ID 436036.1]
    How to set EVENTS in the SPFILE [ID 160178.1]
    Also check:
    http://www.dba-oracle.com/t_grid_rac_events_in_Oracle.htm
    http://www.akadia.com/services/ora_events.html
    Hope it helps
    Regard
    Helios

  • Can you set PDF zoom level when exporting from ID?

    I do many documents for proof and regardless of how the end user is going to view them, I like them to open as a full page ("Fit Page" zoom level) - I want the viewer to get the overall impact of the layout before they see just the top half or upper corner.
    Right now, I export from ID and have to manually set the zoom level  in Properties from within Acrobat Pro. Is there ANY way to set a default export zoom level to save this step, which I have to do many times on most days?

    Only if you export using File > Export > Adobe PDF  (Interactive). Not if you're using File > Export > Adobe PDF (Print),

  • How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

    How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

    beatngu13
    I made an account just to "like" your comment and say that you are a god among men.
    I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
    I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
    Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
    From the bottom of my heart, thank you!

  • Setting transaction isolation levels in WAS5

    I think I'm missing something pretty easy. How can I set the isolation
    levels for the containter managed transactions on my beans?
    Specifically, I want to set soem lookup methods on my Sessions beans
    to TRANSACTION_REPEATABLE_READ. I've already put the
    container-transaction blocks in my ejb-jar.xml
    Does Websphere 5 have something akin to WebLogic's
    weblogic-ejb-jar.xml where you can set additional parameters like
    this? Do I have to use a tool like WSAD to specify this? The AAT
    doesn't seem to have this option.
    Thanks,
    James Lynn

    Hi Slava, Ryan,
    We haven't looked at 8.1 yet since our release cycle wouldn't allow us
    to move to 8.1 until at least June anyway, but even if the problems was
    fixed there it took BEA support more than 6 months (I opened the case on
    Sep 23 2002 and only this week I got the patch that I haven't even tried
    to test to see if it works) to issue a patch for such a small problem.
    The server would just check if the Oracle XA driver was being used and
    no matter what version would just throw an exception if you try to set
    the transaction isolation level saying that the feature in the Oracle
    8.1.7 driver was broken... (although you might be using 9.x or even a
    pre-8.1.7 driver)...
    So this is about it.
    And Slava, I've tried pushing a case harder only to end up with BEA
    support trying to convince me that I was misinterpreting the JDBC spec
    when it was not true, so I just gave up. The main goal of BEA support in
    all of our experience has been that they don't try to solve the cases
    but close them.
    That's my and some of my colleagues personal views anyway, you don't
    have to share them.
    Regards,
    Dejan
    Slava Imeshev wrote:
    Hi Deyan,
    Sorry for the delay. Could you give us more details about CR090104?
    I've got some feedback in XA area, not sure if it was a related case.
    Also, I've never had any problems with weblogic CCE, so you may want
    to push your case a little harder.
    As per the bold statement - the initial question was about functionality
    available in weblogic but not available in websphere - it can't be more
    bold :)
    Regards,
    Slava Imeshev
    "Deyan D. Bektchiev" <[email protected]> wrote in message
    news:[email protected]...
    This is a very bold statement Slava, considering that with Oracle XA
    driver you cannot even set the transaction isolation level because of a
    Weblogic bug (CR090104 that has been open for more than 6 months
    already)...
    Dejan
    Slava Imeshev wrote:
    Hi James,
    "James F'jord Lynn" <[email protected]> wrote in message
    news:[email protected]...
    I think I'm missing something pretty easy. How can I set the isolation
    levels for the containter managed transactions on my beans?
    Specifically, I want to set soem lookup methods on my Sessions beans
    to TRANSACTION_REPEATABLE_READ. I've already put the
    container-transaction blocks in my ejb-jar.xml
    Does Websphere 5 have something akin to WebLogic's
    weblogic-ejb-jar.xml where you can set additional parameters like
    this? Do I have to use a tool like WSAD to specify this? The AAT
    doesn't seem to have this option.
    My guess here is that it's a signal that this is a last chance
    for you to abandon WebSphere and return back to WebLogic's
    safe harbor.
    Regards,
    Slava Imeshev

  • Can we change the DB character set at session level

    hi,
    Please help me
    when iam giving the alter session command iam getting the error:
    SQL> ALTER SESSION set NLS_CHARACTERSE
    T =WE8MSWIN1252;
    ALTER SESSION set NLS_CHARACTERSET =WE8MSWIN1252
    ERROR at line 1:
    ORA-00922: missing or invalid
    i need to enter Arabic names in using the xml file.
    here i have two questions
    1)is it is possible to set character set at session level. because my client is not allowing to bounce the database. DB version is 10.2.0.4
    Right now my DB is in US7ascii
    2)is this "WE8MSWIN1252" set supports Arabic.
    Regards,
    Naresh

    You cannot change the characterset at the session level. If you want to store ARABIC characters in your database then you should change the characterset of your database to any other characterset that supports Arabic characters or to a Unicode characterset like UTF8 or AL32UTF8.
    If you try to insert Arabic characters with your present US7ASCII charancterset then the characters would be stored as junk.

  • Setting transaction isolation level on a replicated server stored procedure

    I have a SQL server that has replication turned onto to another server which is our reporting server. Replication is real-time (or close to it). On the report server I have a stored procedure that runs from a SRS report. My question is it possible or advisable
    or does it even make sense to set the "SET TRANSACTION ISOLATION LEVEL READ COMMITTED" on at the beginning of the stored procedure which selects data from the reporting server database? Is it possible for uncommitted data on the OLTP side of the
    house to be replicated before it is committed? We are having data issues with a report and have exhausted all options and was wondering if dirty data maybe the issue since the same parameters work for a report 1 sec and then next it doesnt.

    Only committed transactions are replicated to the subscriber.  But it is possible for the report to see dirty data if running in READ UNCOMMITTED or NOLOCK.  You should run your reports in READ COMMITTED or SNAPSHOT isolation , and your replication
    subscriber should be configured with READ COMMITTED SNAPSHOT ISLOATION eg
    alter database MySubscriber set allow_snapshot_isolation on;
    alter database MySubscriber set read_committed_snapshot on;
    as recommended here
    Enhance General Replication Performance.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • Setting XA isolation level.

    Is there a configuration parameter that controls the default isolation level used by distributed transactions when you configure XA support on Oracle 8i? I know Oracle's default isolation level is READ COMMITTED, but I would like to have SERIALIZABLE as the isolation level for transactions that are initiated from some MS COM+ components accessing the database.
    Thanks,
    Sam

    Ian,
    The default for Oracle (any version) is ReadCommitted. The only other
    isolation level Oracle supports is Serializable but it's implemented in
    such a way that you will be allowed to continue until commit time and
    only then you might get an exception stating the the access for that
    transaction could not be serialized.
    I don't know for the jDriver but if you use the Oracle Thin XA driver
    even if you set the isolation level in your descriptor you will get an
    exception from Weblogic. It is a Weblogic bug and you can contact
    [email protected] to get a patch.
    Regards,
    Dejan
    IJ wrote:
    edocs (http://e-docs.bea.com/wls/docs70/oracle/trxjdbcx.html#1080746) states that,
    if using jDriver for Oracle/XA you can not set the transaction isolation level
    for a
    transaction and that 'Transactions use the transaction isolation level set on
    the connection
    or the default transaction isolation level for the database'. Does this mean that
    you shouldn't try to set it programatically (fair enough) or that you can't set
    it in the weblogic deployment descriptor either? Also anybody got any idea what
    the default is likely to be if you are using
    an Oracle 9iR2 database?

  • Setting db isolation level on transaction without EJB

              I'm using UserTransaction in the servlet container, to control XA transactions.
              We're not using EJB. How do I set the database isolation level? I'm tempted
              to use java.sql.Connection.setTransactionIsolation(). However, the Sun Javadoc
              for that method says you can't call that after the transaction has started (which
              makes sense). Right now, we're starting the transaction, getting a connection,
              closing the connection, and committing the transaction. I guess that order won't
              work if I want to set the isolation level. Or am I mixing apples and oranges
              here? If I use UserTransaction, is it even appropriate to try to set the isolation
              level on the connection?
              All I really want to do is change the default isolation level. We do not need
              different isolation levels for different use cases. (Not yet, anyway.) We might
              have transactions against two different database instances or other resource managers.
              That's why I want to use UserTransaction and XA transactions.
              Thanks!
              Steve Molitor
              [email protected]
              

    Only committed transactions are replicated to the subscriber.  But it is possible for the report to see dirty data if running in READ UNCOMMITTED or NOLOCK.  You should run your reports in READ COMMITTED or SNAPSHOT isolation , and your replication
    subscriber should be configured with READ COMMITTED SNAPSHOT ISLOATION eg
    alter database MySubscriber set allow_snapshot_isolation on;
    alter database MySubscriber set read_committed_snapshot on;
    as recommended here
    Enhance General Replication Performance.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • Setting transaction isolation level for jDriver Oracle/XA

    edocs (http://e-docs.bea.com/wls/docs70/oracle/trxjdbcx.html#1080746) states that,
    if using jDriver for Oracle/XA you can not set the transaction isolation level
    for a
    transaction and that 'Transactions use the transaction isolation level set on
    the connection
    or the default transaction isolation level for the database'. Does this mean that
    you shouldn't try to set it programatically (fair enough) or that you can't set
    it in the weblogic deployment descriptor either? Also anybody got any idea what
    the default is likely to be if you are using
    an Oracle 9iR2 database?

    Ian,
    The default for Oracle (any version) is ReadCommitted. The only other
    isolation level Oracle supports is Serializable but it's implemented in
    such a way that you will be allowed to continue until commit time and
    only then you might get an exception stating the the access for that
    transaction could not be serialized.
    I don't know for the jDriver but if you use the Oracle Thin XA driver
    even if you set the isolation level in your descriptor you will get an
    exception from Weblogic. It is a Weblogic bug and you can contact
    [email protected] to get a patch.
    Regards,
    Dejan
    IJ wrote:
    edocs (http://e-docs.bea.com/wls/docs70/oracle/trxjdbcx.html#1080746) states that,
    if using jDriver for Oracle/XA you can not set the transaction isolation level
    for a
    transaction and that 'Transactions use the transaction isolation level set on
    the connection
    or the default transaction isolation level for the database'. Does this mean that
    you shouldn't try to set it programatically (fair enough) or that you can't set
    it in the weblogic deployment descriptor either? Also anybody got any idea what
    the default is likely to be if you are using
    an Oracle 9iR2 database?

  • Setting Transaction isolation level when I'm not in an EJB

              I have a Message Driven Bean (MDB) that is container managed, and its transaction
              isolation is set to TRANSACTION_READ_COMMITTED in weblogic-ejb-jar.xml and that
              seems to work fine. If I look at an entity bean in onMessage which is updated/commited
              outside the transaction I can see the updates no problem.
              Now the problem is this.. inside the onMessage method, the MDB creates a new
              instance of a class. This class starts up its own UserTransaction (using (UserTransaction)new
              InitialContext().lookup("javax.transaction.UserTransaction")) and goes into a
              loop working away. Inside the loop it is inspecting a value on an entity bean.
              The classs never sees any updates to this bean which are made outside this new
              UserTransaction.
              It looks to me that the UserTransaction that the class is getting has a different
              isolation level (serialized?). Is there a way to set the isolation level for
              a UserTransaction?
              Any help would be great!
              lance
              

              Just a follow up, I think the isolation level is perhaps being set to REPEATABLE_READ,
              since that is what seems to be happening. The value from the first read is maintained
              through subsequent reads in the same transaction.
              lance
              "Lance" <[email protected]> wrote:
              >
              >I have a Message Driven Bean (MDB) that is container managed, and its
              >transaction
              >isolation is set to TRANSACTION_READ_COMMITTED in weblogic-ejb-jar.xml
              >and that
              >seems to work fine. If I look at an entity bean in onMessage which is
              >updated/commited
              >outside the transaction I can see the updates no problem.
              >
              >Now the problem is this.. inside the onMessage method, the MDB creates
              >a new
              >instance of a class. This class starts up its own UserTransaction (using
              >(UserTransaction)new
              >InitialContext().lookup("javax.transaction.UserTransaction")) and goes
              >into a
              >loop working away. Inside the loop it is inspecting a value on an entity
              >bean.
              > The classs never sees any updates to this bean which are made outside
              >this new
              >UserTransaction.
              >
              >It looks to me that the UserTransaction that the class is getting has
              >a different
              >isolation level (serialized?). Is there a way to set the isolation level
              >for
              >a UserTransaction?
              >
              >Any help would be great!
              >
              >lance
              

Maybe you are looking for