Setting static IP with computer variables with ConfigMgr 2012 R2 + MDT 2013?

Hi!
So im trying to set static IP with computer variables in ConfigMgr 2012 R2 with MDT integration. Does not seem to work as expected, after installation it has DHCP enabled.
This is my config:
ZTINicConfig.log
<![LOG[Property ForceCapture is now = ]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[ZTINicConfig Script Entered.]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[ PHASE = ]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[ Deployment Method = SCCM]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[ Deployment Type = NEWCOMPUTER]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[Capture Network Settings from local machine and write to Environment.]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[Query networking adapters...]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[Networking Adapters found! Count = 1]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[Property OSDAdapterCount is now = 0]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
<![LOG[ZTINicConfig processing completed successfully.]LOG]!><time="14:18:29.000+000" date="03-19-2015" component="ZTINicConfig" context="" type="1" thread="" file="ZTINicConfig">
And I can't find any of the variables specified in ZTIGather.log. Do they only work with pure MDT or in CS.ini ?
Any Ideas ?
Thanks!

Many methods to achieve the same. I've done something similar once with a small PowerShell script like this:
http://www.petervanderwoude.nl/post/setting-a-static-ip-address-during-a-deployment-via-powershell-and-configmgr-2012/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Domain Join to a specific OU based on Computer Name - ConfigMgr 2012 R2 / MDT 2013

Hi all
i need to build an OS deployment task sequence with ConfigMgr 2012 R2 and MDT 2013. my requirement is to be able to join a computer based on its computer name. there are three types of computers. Sales / Marketing and Technical. based on the prefix of the
computer name i need to place them on 3 different OUs. Computer Names would be SAL1100, MKT1100 or TEC1100, i would like to refer first three characters of the computer name and the decided on which OU they need to be allocated to.
i would appreciate if someone could tell me how i can do this within my task sequence

I don't think you can accomplish this by using conditions. Instead I'd use the script that Jörgen provided. Here's an edit of that so that it would suit your environment requirements of the first 3 characters of the OSDComputerName:
set env = CreateObject("Microsoft.SMS.TSEnvironment")
sComputerName = env("OSDComputerName")
threeChars = UCase(Left(sComputerName,3))
sBuiltOU = "NOT_set!"
If threeChars = "ABC" Then
sBuiltOU = "LDAP://OU=ABC,OU=Computers,DC=DOMAIN,DC=COM"
If threeChars = "DEF" Then
sBuiltOU = "LDAP://OU=DEF,OU=Computers,DC=DOMAIN,DC=COM"
If threeChars = "GHI" Then
sBuiltOU = "LDAP://OU=GHI,OU=Computers,DC=DOMAIN,DC=COM"
env("OSDDomainOUName") = sBuiltOU
Wscript.quit
Save this as 'SetOU.vbs' and create a package in ConfigMgr where you specify the source content to the location where you placed the script file. As Jason described, put a Run Command Line step right before Apply Windows Settings, use 'cscript.exe SetOU.vbs'
as the command line and point to the package you created. This script assumes that the OSDComputerName variable is already properly populated with the correct computer name.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

SQL query with Bind variable with slower execution plan

I have a 'normal' sql select-insert statement (not using bind variable) and it yields the following execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=7 Card=1 Bytes=148)
1 0 HASH JOIN (Cost=7 Card=1 Bytes=148)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=4 Card=1 Bytes=100)
3 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=3 Card=1)
4 1 INDEX (FAST FULL SCAN) OF 'TABLEB_IDX_003' (NON-UNIQUE)
(Cost=2 Card=135 Bytes=6480)
Statistics
0 recursive calls
18 db block gets
15558 consistent gets
47 physical reads
9896 redo size
423 bytes sent via SQL*Net to client
1095 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
I have the same query but instead running using bind variable (I test it with both oracle form and SQL*plus), it takes considerably longer with a different execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=407 Card=1 Bytes=148)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=3 Card=1 Bytes=100)
2 1 NESTED LOOPS (Cost=407 Card=1 Bytes=148)
3 2 INDEX (FAST FULL SCAN) OF TABLEB_IDX_003' (NON-UNIQUE) (Cost=2 Card=135 Bytes=6480)
4 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=2 Card=1)
Statistics
0 recursive calls
12 db block gets
3003199 consistent gets
54 physical reads
9448 redo size
423 bytes sent via SQL*Net to client
1258 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
TABLEA has around 3million record while TABLEB has 300 records. Is there anyway I can improve the speed of the sql query with bind variable? I have DBA Access to the database
Regards
Ivan

Many thanks for your reply.
I have run the statistic already for the both tableA and tableB as well all the indexes associated with both table (using dbms_stats, I am on 9i db ) but not the indexed columns.
for table I use:-
begin
dbms_stats.gather_table_stats(ownname=> 'IVAN', tabname=> 'TABLEA', partname=> NULL);
end;
for index I use:-
begin
dbms_stats.gather_index_stats(ownname=> 'IVAN', indname=> 'TABLEB_IDX_003', partname=> NULL);
end;
Is it possible to show me a sample of how to collect statisc for INDEX columns stats?
regards
Ivan

Issue with Capture Task Option showing correctly in MDT 2013

I am aware that having the variable of DomainJoin will prevent the capture dialog from appearing when running the task. The problem is, even when the options are greyed out due to the domain settings not being applied from a different setting in the workflow
it still breaks the task.
E.G.
I am using the database, and have my workflow as such:
[Settings]
Priority=Model, TaskSequenceID, LSettings, CRoles, RApps, LApps, MMApps, MMSettings, Default
Properties=MyCustomProperty
DataBase:
Location Settings: Overall settings for Domain join, wizard skips, etc info per gateway
Role Apps: Apps per role
Make/Model Apps: Apps specific to a piece of hardware
CustomSettings INI:
Model/Task Sequence/Default: I have tried to null out the DomainJoin settings with these variables by adding workgroup join by task ID, Model, etc and nothing seems to work. I've verified in other tasks
that these settings take place of what's in the DB, but the DB settings are still there, greyed out and causing an issue.
[X86SYSANDCAP]
JoinDomain=
JoinWorkgroup=WORKGROUP
[VMware Virtual Platform]
JoinDomain=
JoinWorkgroup=WORKGROUP
As shown below the model/TS specify the workgroup (1st pic is normal deploy, 2nd is cap) but the greyed out settings are still having an effect. Skip Capture is set to NO at each level, and when I remove the Domain from the DB it shows up correctly.
Not sure what to do besides removing the domain everytime I want to do a capture, which seems a bit unreasonable and I don;t want my T1s in the DB.

I highly recommend to always use the standard Client task sequence for a build and capture. Much more reliable.
Check out these Resources, the info is also valid for Windows 7:
TechNet Docs - Create a Windows 8.1 Reference Image
http://technet.microsoft.com/en-us/library/dn744290.aspx
Virtual Hands-On-Labs - Creating a Windows 8.1 reference image
http://go.microsoft.com/?linkid=9845755
How to deploy Windows 8.1 (and Windows 7) with MDT 2013 - The Resources
http://www.deploymentresearch.com/Research/tabid/62/EntryId/186/How-to-deploy-Windows-8-1-and-Windows-7-with-MDT-2013-The-Resources.aspx
/ Johan
Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch

SCCM 2012 R2 With MDT 2012 AND MDT 2013 Side by Side

Currently we're running 2012 R2 CU3 with MDT 2012 integrated into it. We're looking at upgrading to MDT 2013 (whatever the latest update is). What I'm wondering, and can't seem to find any information on, is if we can continue to use our MDT 2012 boot
.wims/OSD Task Sequences/etc until such time as we create and test new ones or are we going to have to update everything right away?

Are you sure you are using MDT *2013* with ConfigMgr 2012 *R2*? That's not a supported configuration and I think there are multiple technical problems with this combination.
The task sequences themselves don't change -- because they are ConfigMgr task sequences -- but the MDT tasks must be updated to use the MDT 2013 tasks. Boot image use is partially dependent upon the OS you are deploying however only WinPE 3.1 and WinPE 5.0
based boot images are supported in R2.
Jason | http://blog.configmgrftw.com | @jasonsandys
Did you mean to ask if we were running MDT 2012 with ConfigMgr 2012 R2? Then yes we are. We did the upgrade from SP1 CU2 to R2 CU3 a couple of weeks ago but haven't upgraded MDT to 2013 yet. That's our next step but we also don't want to take down/break imaging
capability if we can help it (major college, staff/students constantly breaking stuff, etc).

HT4859 I shared itunes account with my daughter, had never synced my phone with computer, synced with computer and chose daughter's phone instead of create new phone, all phone contacts are now gone replaced with daughter's - is there no way to get contac

I shared itunes account with daughter's phone, never synced my phone with home computer through itunes, synced tonight with itunes but choose her iphone and it restored all her info on my phone, all my phone contacts, text messages and photos are gone - I had auto backup to icloud daily - is there any way to get phone numbers and texts back off icloud?

If you have been backing up to iCloud your camera roll photos, text messages and other data and setting should be contained in the backup. Restoring the backup to the phone should recover them.
To do this, go to Settings>General>Reset, tap Erase All Content and Settings (which will erase the phone), then go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup and follow the prompts. Be sure your phone is connected to wifi and your charger as this may take some time to finish.

Using a query with bind variable with columns defined as raw

Hi,
We are on Oracle 10.2.0.4 on Solaris 8. I have a table that has 2 columns defined as raw(18). I have a query from the front end that queries these two raw columns and it uses bind vairables. The query has a performance issue that I need to reproduce but my difficulty is that how to test the query in sqlplus using bind variables (the syntax for bind vairables fails for columns with raw datatype).
SQL> DESC TEST
Name                                      Null?    Type
ID1                                                RAW(18)
ID2                                                RAW(18)
SQL> variable b1 RAW(18);
Usage: VAR[IABLE] [ <variable> [ NUMBER | CHAR | CHAR (n [CHAR|BYTE]) |
                    VARCHAR2 (n [CHAR|BYTE]) | NCHAR | NCHAR (n) |
                    NVARCHAR2 (n) | CLOB | NCLOB | REFCURSOR |
                    BINARY_FLOAT | BINARY_DOUBLE ] ]
The above is the error I get - i cant declare a variable as raw.
SQL> variable b2 RAW(18);
Usage: VAR[IABLE] [ <variable> [ NUMBER | CHAR | CHAR (n [CHAR|BYTE]) |
                    VARCHAR2 (n [CHAR|BYTE]) | NCHAR | NCHAR (n) |
                    NVARCHAR2 (n) | CLOB | NCLOB | REFCURSOR |
                    BINARY_FLOAT | BINARY_DOUBLE ] ]
SQL> variable b3 RAW(18);
Usage: VAR[IABLE] [ <variable> [ NUMBER | CHAR | CHAR (n [CHAR|BYTE]) |
                    VARCHAR2 (n [CHAR|BYTE]) | NCHAR | NCHAR (n) |
                    NVARCHAR2 (n) | CLOB | NCLOB | REFCURSOR |
                    BINARY_FLOAT | BINARY_DOUBLE ] ]
--now the actual query below
SQL> SELECT * FROM TEST WHERE ID1=:B1 AND ID2 BETWEEN :B2 AND :B3;
SP2-0552: Bind variable "B3" not declared.
(this fails due to the errors earlier)Also this is a third party app schema so that we don't have the option of modifying the data type of the columns.
Thanks,
Edited by: orausern on May 10, 2011 11:30 AM

Try anonymous PL/SQL block:
declare
b1 RAW(18);
b2 RAW(18);
b3 RAW(18);
begin
b1:=..;
b2:=..;
b3:=..;
SELECT col1, col2, ..
INTO ...
FROM TEST
WHERE ID1=:B1
AND ID2 BETWEEN :B2 AND :B3;
end;
/

Issue with substitution variable with @MDSHIFT in BR in Calc Manager

Hi Experts,
We have a BR in EAS which is working fine.
and exported to Calcmanager, now while validation it is giving error "@BaseScenario" is not found.
the code is
@MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->&BaseScenario->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",);
if i hard code it like @MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->"P7PP"->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",); working fine.
is there any limitation with calc manger and substitution variables?
Thanks
GP

There seems to be many issues with validations in calc manager, does the rule run if you dont validate.
Cheers
John
http://john-goodwin.blogspot.com/

Software Inventory Reporting with computer name on SCCM 2012

Hi All,
I am just trying to use "Count of all instances of software registered with Add or Remove Programs" from SCCM 2012 Report modules but its giving with collection id only ..
as i am trying to include in this with computername instead of Collection id but i am unable to get that.
is any one help me to get the list of software's name with counts inclusive of computernames
KJSUBBU

The issue with your request is that the COUNT statement gives numbers of distinct values.
For example, you wish to count all instances of "Microsoft Office 2007 Professional Plus" - That program name is a distinct value and there may be 50 instances in your environment.
BUT, when you add the computer name to this - e.g. MACHINENAME "Microsoft Office 2007 Professional Plus" you will always count 1 for each value and the query will yield 50 rows, because each machine name is a distinct value, despite
there being many instances of Office... the COUNT statement checks all values in the SELECT statement as part of the distinct value.
Here is an example:
SELECT
v_GS_SYSTEM.Name0,
v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
COUNT(*) AS Qty
FROM
v_GS_SYSTEM
INNER JOIN
v_GS_ADD_REMOVE_PROGRAMS ON v_GS_SYSTEM.ResourceID = v_GS_ADD_REMOVE_PROGRAMS.ResourceID
WHERE
v_GS_ADD_REMOVE_PROGRAMS.DisplayName0 = 'Google Chrome'
GROUP BY
v_GS_SYSTEM.Name0,
v_GS_ADD_REMOVE_PROGRAMS.DisplayName0
Will yield the following results:
Name0             DisplayName0     Qty
TSTWIN7-01     Google Chrome    1
TSTWIN8-01     Google Chrome    1
I agree with Garth's post that you need to gather mgmt.'s requirements for this data first. If they are wanting reports which show counts of software, AND where that software is installed, you will need two separate reports: 1) summary
report of counts and 2) drill-down from the summary showing where a specific piece of software is installed.
Report for 1) is canned - "Count all instances of software registered in Add or Remove Programs"
Report for 2) is also canned - "Computers with specific software registered in Add Remove Programs"
The second report is a drill-down from the first when you click on the software Display Name link in the report.
I imagine that your company is looking to checking license counts and that if you ask further, you will find the specific software for which they are searching. This will also be a good exercise for you to become familiar with the auditing process
for annual true-ups, if you have not gone through this before.

Need help with accesing variable with xpath.

Hi All,
I need help with xpath in "Switch" BPEL construct. Switch is used to compare value assigned to output vairable and follow one path for "Deny" and another for "Approve". The following is data type for output variable.
<element name="processResponse">
     <complexType>
          <sequence>
               <element name="result" type="string"/>
          <sequence>
     <complexType>
</element>
The following expressions in Switch statement throw lava.lang.Exception. It error is xpath internal error".
x20:compare('Deny',$outputvariable.payload/client:result)
x20:compare('Deny',bpws:getVariableData('outputvariable','payload','/client:processResponse/client:result')
It works with x20:compare('Deny','Deny'). So I assumed it must be accessing the variable.
Any help greatly appreciated.
Thanks,
Satish

Cany you try the following
x20:compare('Deny',string($outputvariable.payload/client:result))
x20:compare('Deny',string(bpws:getVariableData('outputvariable','payload','/client:processResponse/client:result'))
Regards
Albin I
http://www.albinsblog.com/

Problem with formula variable

HI,
I am facing problem with formula variable with replacement path. my requirement is system date - posting date.
here i created 2 formula variable one is system date. second formula vaiable with replacement path is posting date. second formula vaiable not populating data. please help on that.
regards,
kris

Hi,
here is some idea.. here i have taken expample dates 1)notification creation date and 2) notification completion.
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

Issue with Default Variable in WAD after Java Patch 7.01.7.31

Hello all,
I'm running into an issue with the Web Application Designer Template execution for a particular default variable. This started occuring after Java Patch 7.01.7.31 we had implented over the weekend.
The issue is when Executing the WAD Template, we have a selection screen with a variable with default values assigned to it. When leaving the default values and hitting Ok to execute through the screen does not register and stays as is and I get a message at the top with the following: Characteristic Prob % Number has no master data for "1.00" or you do not have authorization.
This only seems to occur for this default variable on info object Prob % Number, the other default variables seem to work fine. Also another note when clearing out the values it returns data and executes through. The value 1.00 is also a valid value in the cube and also in the output display. If we run this report in the BEx analyzer, the selection screen executes through with the default variable perfectly fine, this is only an issue with the Web Application Designer Template.
Has anyone ran into this? I've searched and have not found any notes as of yet.
Thank you,
-Andy

Dear Andy,
Please raise this to SAP, seems like a strange problem this needs to be addressed by OSS note only.
Close this thread once you get a solution.
Regards.
Den

Formula Variable with User Entry

Hi,
I'm confused with Formula Variable with Replacement Path and Formula Variable with User Entry.
PLz, Explain with an example .....In which senarios Formula Variable with Replacement Path is used and In which senarios Formula Variable with User Entry is used.

Hi,
Suppose you have some key figure sales.
Now in the report you want to display 10% of sales or may be 20% of sales based on the user input.
In this case you will define formula variable with user input. Because here percentage will be varying based on user input.
And suppose you have a key figure price which is attribute of material and you want to use that price for calculation in the report. In this case you will define formula varible with replacement path.
Let me know if you need more information.
Regards,
Mansi

Code 91 - Caused Error: (Object variable or With block variable not set)

Hi,
We are using FDM 9.3.1. We have enabled batch processing.
We are having following process being followed
- Batch Loader script will pull the data from dwh table for each entity, scenario, year and period
- Batch processing is set to serial and processlevel set to Up-To-Check
- We had following five files created for Location - EMAFF100
i. 1_EMAFF100_ACT_May-2011_RR.txt
ii. 1_EMAFF100_ACT_Jun-2011_RR.txt
iii. 1_EMAFF100_ACT_Jul-2011_RR.txt
iv. 1_EMAFF100_ACT_Aug-2011_RR.txt
v. 1_EMAFF100_ACT_Sep-2011_RR.txt
Batch loader process completed the processing for May - 2011, Jul - 2011, Aug-2011, Sep-2011.
But for Jun 2011 it has given the following error in the 'tbatchinformation' table and failed at import stage.
40751.6239236111 1_EMAFF100_ACT_JUN-2011_RR.TXT 2 2 91-Object variable or With block variable not set
When we checked the view error log from tool menu we found following
** Begin FDM Runtime Error Log Entry [2011-07-27-14:58:29] **
ERROR:
Code......................................... 91
Description.................................. File [1_EMAFF100_ACT_Jun-2011_RR.txt] Caused Error: (Object variable or With block variable not set)
Procedure.................................... clsBatchLoader.mFileCollectionProcess
Component.................................... upsWBatchLoaderDM
Version...................................... 931
Thread....................................... 5600
IDENTIFICATION:
User......................................... ncreighton
Computer Name................................ HYAPSDEV1
App Name..................................... EMATTEST
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ hydev_serv
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... EMAFF100
Location ID.................................. 762
Location Seg................................. 16
Category..................................... ACT
Category ID.................................. 13
Period....................................... Jun - 2011
Period ID.................................... 30/06/2011
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... False
Is Auditor................................... False
We then re submitted data for Jun period and saw batch process got successfully completed and June data got imported successfully and also rest other processes got through.
Can any one provide exact cause for this error? As we have automated the data load from DWH to FDM And then to HFM. Hence when such error comes it disturbs lot of processing there on. Appreciate your early response.
Thanks in advance.

Hi SAP collegues,
At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes. Please check the following.
Note before doing the following, close all other open Excel and BPC sessions.
Within Excel go to File à Options
Select the Add-Ins option on the left
Select the <<COM Add-ins >> option in the Manage drop down, and click Go
Make sure that the Planning and Consolidation option is selected. If not, mark this box and click OK.
If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
Let me know if you have any queries,
Kind Regards,
robert ten bosch

Setting static IP with computer variables with ConfigMgr 2012 R2 + MDT 2013?

Similar Messages

Maybe you are looking for