Setting the bounds to the panel

Hi,
I want to set the bounds for the panel so that any component in that panel shouldn't go out of that panel bounds. Can anybody know how to make the component movable to some restricted area?
Thanks and Regards
kishore.

Hi, kishore!
I think that I haven't really understand you, but if I'm right, did you try to use an empty border on yuor panel?
Here's the way you must use it...
panel.setBorder(BorderFactory.createEmptyBorder(10, 10, 10, 10));If I'm wrong, please give me more details of your problem.
Bye...

Similar Messages

Make the panel fit the image so MouseListener only invoke when click image

I want to add MouseListener to only the image itself. So I draw the image onto a image panel, add that panel onto the main panel, then add the main panel onto the frame. However, my problem is that the size of my image panel is too large, it take up almost the entire frame. So my mouselistener response not only when I click onto the image, but also anywhere in my image panel. I try to resize the image panel to fit the size of my image, but no luck. Is there a solution for this. I feel like, it got something to do with the layout. Here is my code, if you mind read it. Thank you very much
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Image;
import java.awt.Toolkit;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import java.awt.event.MouseMotionListener;
import javax.swing.*;
public class ImageRotate
     private static final String LABEL = "MIDI PROTOCOL";
     private JPanel mainPanel = new JPanel();
     private JPanel labelPanel = new JPanel();
     public ImageRotate()
          mainPanel.setOpaque(true);
          mainPanel.setBackground(Color.YELLOW);
          mainPanel.setLayout(new BorderLayout());
          Font labelFont = new Font("serif", Font.BOLD, 30);
          createLabelPanel(LABEL, labelFont);
          labelPanel.setOpaque(false);
          mainPanel.add(labelPanel, BorderLayout.NORTH);
          Drawing d = new Drawing();
          d.setOpaque(true);
          d.addMouseListener(new MouseAdapter(){
               public void mousePressed(MouseEvent e)
                    System.out.println("Pressing on the image");
          d.addMouseMotionListener(new MouseAdapter(){
               public void mouseDragged(MouseEvent e)
                    System.out.println("Dragging the image");
               public void mouseMoved(MouseEvent e)
          mainPanel.add(d, BorderLayout.CENTER);
     private void createLabelPanel(String str, Font font)
          JLabel label = new JLabel(str);
          label.setFont(font);
          label.setForeground(Color.RED);
          labelPanel.add(label);
     public JPanel getPanel()
          return mainPanel;
     public static void main(String args[])
          JFrame frame = new JFrame();
          frame.getContentPane().add(new ImageRotate().getPanel());
          frame.setSize(new Dimension(300, 300));
          frame.setVisible(true);
class Drawing extends JPanel
     Image img;
     public Drawing()
          setSize(new Dimension(100,100));     //Try to make the panel fit the image...NO LUCK
          setBackground(Color.GREEN);
          img = Toolkit.getDefaultToolkit().createImage("images/nob.gif");
     public void paintComponent(Graphics g)
          super.paintComponent(g);
          Graphics2D g2D = (Graphics2D)g;
          g2D.drawImage(img, 40, 40, this);
}

yunaeyes wrote:
In class Drawing extends JPanel, I did try to to set the panel to the image size but no luck there,
both setSize(new Dimension(100,100)), setPreferredSize(new Dimension(100,100)) does not make the panel smallerIt can be made to work. I find it hard to comment on unseen code.
>
BigDaddyLoveHandles wrote:
I think a better approach is to handle the mouse click properly -- see if the click is over the image or not.Can you elaborate on this?The mousePressed method you posted assumes you are over the image. Check the mouse coordinates! If the component is bigger than the image this may not be so.

Is there a way to set the control panel in assistive touch?

I have a survivor case on my iPhone 5 and it is difficult to pull up the control panel from the bottom. Is there a way to set the control panel to pop up through assistive touch? If so how?

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
No, but it is very nice idea, add it to the feature request page:
http://feedback.photoshop.com/photoshop_family/

How do I set the default text in a bound textbox?

How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?
I have the following code (see below), but for some reason it does work when I put the code in the
AddNewItem_Click event; however, it does work if I put it in the
Form's Load Event. The statement in question is Me.txtBusUsagePct.Text = 100.
What am I doing wrong? Why can't I set the default text in the AddNewItem_Click
event?
Private Sub BindingNavigatorAddNewItem_Click(sender As Object, e As EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.txtBusUsagePct.Text = "100"
End Sub
BobV365

Hello,
Here I am using mocked up data but the important thing is after loading the data. Requires on the form a BindingNavigator and two text boxes.
Public Class Form1
WithEvents bsData As New BindingSource
Private Sub Form1_Load(
ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
Using MockedData As New DataTable()
MockedData.Columns.AddRange(New DataColumn() _
New DataColumn("PartName", GetType(String)),
New DataColumn("partqty", GetType(Int32))
MockedData.Rows.Add(New Object() {"Part A", 100})
MockedData.Rows.Add(New Object() {"Part 99", 34})
MockedData.Rows.Add(New Object() {"Part B", 4})
bsData.DataSource = MockedData
End Using
CType(bsData.DataSource, DataTable).AcceptChanges()
BindingNavigator1.BindingSource = bsData
TextBox1.DataBindings.Add("Text", bsData, "Partname")
TextBox2.DataBindings.Add("Text", bsData, "partqty")
End Sub
Private Sub bsData_AddingNew(
ByVal sender As Object,
ByVal e As System.ComponentModel.AddingNewEventArgs) _
Handles bsData.AddingNew
Dim dv As DataView = TryCast(bsData.List, DataView)
Dim rv As DataRowView = dv.AddNew()
rv("PartName") = "(new)"
rv("partqty") = 0
e.NewObject = rv
bsData.MoveLast()
End Sub
End Class
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

How do you set the size / bounds of a waveform chart at run time?

I have a plot area that I would like to fill with as many waveform charts as the user specifies (at run time). The "bounds" property is read only and I haven't noticed an additional "size" property for a waveform chart as there is for a button. Is there a way to set the size of a waveform chart at run time, and if not, why not? (Labview 6.1)

Look at it a little more carefully, I suspect that your assumption is only half wrong. The property does only resize the plot area--LV resizes the frame to fit the resized plot on it's own.
You'll need to bear this in mind when you're figuring-out what size to set the property to.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Is there a way to set the default Initial View to Bookmarks Panel and Page on word documents that I save as PDF?

When I save my word 2013 documents as Adobe PDF I have to open the PDF up, go to File>Properties>Initial View>Navigation Tab and then set the initial view as Bookmark Panel and Page; it gets pretty tedious.
I use Save as Adobe PDF rather than Print to Adobe PDF Printer because I like being able to have the security settings automatically set.
I just want to be able to save my word document as Adobe PDF with the initial view already set as Bookmark Panel and Page, and with security, so I can send it out immediately.
Is this possible?
Thank you.

Use the Firefox Android Addon - Phony
*https://addons.mozilla.org/en-US/android/addon/phony
for more
*https://addons.mozilla.org/en-US/android/

This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account.

I am not able to send out an email. I keep getting the following message: This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account. Can someone help me with this?

We need some information, starting with the email provider (eg. Google, Yahoo, Bellsouth, etc)

Dynamically setting the color of the title in a Panel

Hello, I know I can set the color & font of the title in a Panel using the titleStyleName in a stylesheet. How can I dynamically change the color though? I have a component:
<mx:Panel id="myPanel"borderColor="{this.color1}" />
where this.color1 is a value that changes dynamically, and thus changes the border color. How do I do this for the color of the text in the title?

Hi,
Try this
var css:CSSStyleDeclaration = StyleManager.getStyleDeclaration(".myPanelTitle");
css.setStyle("color",0x00FF00);

How to set the cell size in grid layout where each cell is a panel

Hi,
I am using a grid layout where each cell is a panel. Here I want to
set size of each panel to be equal irrespective of any. But it is not obliging the setSize().
no of row in grid - 4
no of columns - 4
each cell is a panel. each panel has a label.
panel.setSize(parent.getWidth(), parent.getWidth()/4); // not working. Size is adjusting to the length of the label.
I want to force the size of the panel to our preferred size.
Note: In swing we can use JPanel.setPreferredSize(). Unfortunately I cannot use Swing components. Requirement is awt only.
Any help in this is highly appreciated.
Thanks
Kishore

I observed it is same behavior with gridbag layout. Infact it is gridbag layout only with 4 cells, where first cell should be of constant width (it is base for other cell widths) and other cells are variable (some integer*base width of first cell). I want to set the size of first cell width to be constant.
Though it is redundant I once again say that it works perfect with setPreferredSize of JComponent.
But I should not use any swing component/api. This is sytem requirement.
Any help is appreciated.
Thanks
Kishore

Setting the max and min bounds of a result set

I'm trying to set the upper and lower bound values of a result set. Meaning, I want to limit the values in my result set to not be below/above a certain number, BUT I want any number in my result set that is below/above the lower/upper bound that i have designated to be decoded to the lower/upper bound number that I have designated. Here's an example to help clarify:
WITH temp_table AS
SELECT 1231.12 AS col FROM dual UNION ALL
SELECT 1001.00 FROM dual UNION ALL
SELECT -32.0 FROM dual UNION ALL
SELECT -3.0 FROM dual UNION ALL
SELECT 332.0 FROM dual UNION ALL
SELECT 211.0 FROM dual
SELECT CASE WHEN col < 0 -- 0 is the lower bound
            THEN
                 0
            WHEN col > 1000 -- 1000 is the upper bound
            THEN
                 1000
            ELSE
                 col
       END as desired_result
FROM   temp_tabledesired result set:
        DESIRED_RESULT
     1000
     1000
        0
     0
     332
     211I was wondering if there was another function or method of achieving my desired result set without having to use a CASE statement? I have to do this to several columns, and it doesn't seem very efficient to throw a CASE statement around each one.

LEAST and GREATEST will do that too :
SQL> WITH temp_table AS
2 (
3   SELECT 1231.12 AS col FROM dual UNION ALL
4   SELECT 1001.00 FROM dual UNION ALL
5   SELECT -32.0 FROM dual UNION ALL
6   SELECT -3.0 FROM dual UNION ALL
7   SELECT 332.0 FROM dual UNION ALL
8   SELECT 211.0 FROM dual
9   )
10 SELECT least(greatest(col, 0), 1000)
11 FROM temp_table
12 ;
LEAST(GREATEST(COL,0),1000)
                       1000
                       1000
                          0
                          0
                        332
                        211
6 rows selected
I have to do this to several columns, and it doesn't seem very efficient to throw a CASE statement around each one.Any test case showing CASE as not efficient?
Edited by: odie_63 on 25 juil. 2012 23:20

Can I use a colour palette control to set the colour of an LED on front panel?

Hi,
I want to allow the user of my LabView program to be able to set the colour of an enlarged LED on the front panel using a colour palette control also on the front panel. Is this possible or can the LED only be the colour it is set to in its properties dialogue box?
Thanks,
Dave.

The question is of course: "Does it really need to be a boolean LED that has a True/False and all the boolean logic???
If you just want an LED lookalike where the color can be easily controlled programmatically I would recommend a color box indicator instead. You can even customized it to look like an LED! The attached example (LabVIEW 7.1) shows both methods, but the color box option is programmatically much less messy (no bundling, no array building, no property nodes!).
(To make the LED color box indicator, I customized a plain color box and simply imported the graphic elements from the regular LED indicator.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ColorBoxLED.vi ‏22 KB

Looking for a way to programmatically set the visible portion of the front panel when a subVI opens

I am looking for a way to programmatically set the visible portion of the front panel when a subVI opens. Haven't found any posts that relate, but I'm not sure how to ask the right question. To be clear, I want to write a helper VI to go through a list of subVIs to make sure the background images are all in the same place when their respective subVIs open. I hate manually playing with scroll bars before I save each of the VIs... I'm figuring I need to find the top/left location of the background image (know how to do this already) and then set a VI FP property to these values or some offset, but I can't find the relevant property. FP:run-timeposition:custom looked promissing, but only affects the location of the window, not the area of the front panel the window is displaying.
Solved!
Go to Solution.

Cool. Getting closer. The way I implemented your suggestion affects the subVI only if it is open. I can use this to do what I'm after, perhaps putting the code into each subVI. Maybe open all subs, run the helper, and save. Seems like I'm missing the elegant version...
My proof of concept code:

How to set a backgound pic for the panel

I use a JTable as a member of a JPanel Object, and I want to set a backgound pic for the panel ,How to?

Hello,
import java.awt.*;
import javax.swing.*;
public class ImageTest extends JFrame
     public static void main(String[] args)
          new ImageTest();
     public ImageTest()
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          MainPanel pan = new MainPanel();
          pan.add(new JTable(6, 3));
          getContentPane().add(pan);
          pack();
          setVisible(true);
     class MainPanel extends JPanel
          private Toolkit tool = Toolkit.getDefaultToolkit();
          private MediaTracker media = new MediaTracker(this);
          private Image background = tool.getImage(yourImage);
          MainPanel()
               super();
               media.addImage(background, 0);
               try
               {     //wait to calcute sizes correctly
                    media.waitForID(0);
               }catch (InterruptedException e){}
          public void paintComponent(Graphics g)
               super.paintComponent(g);
               g.drawImage(background, this.getX(), this.getY(), this);
          public Dimension getPreferredSize()
               return new Dimension(background.getWidth(this), background.getHeight(this));
}regards,
Tim

Help in setting the size of panels

Hi,
I am not able to set the size of the panels. I have three panels- steelSettingsPanel, woodSettingsPanel and labourSettingsPanel whose size I set using setPreferredSize function. However, their size does seem to change. I then add the three panels to the dialog as under:-
Container dialogContainer = dialog.getContentPane();
dialogContainer.setLayout(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
dialogContainer.add(steelSettingsPanel, gbc);
gbc.gridx = 0;
gbc.gridy = 1;
dialogContainer.add(woodSettingsPanel, gbc);
gbc.gridx = 0;
gbc.gridy = 2;
dialogContainer.add(labourSettingsPanel, gbc);
gbc.gridx = 0;
gbc.gridy = 3;
dialogContainer.add(buttonPanel, gbc);
dialog.setSize(300, 250);
dialog.setLocation(parent.getX() + dialog.getWidth()/2, parent.getY() + dialog.getHeight()/2);
dialog.setResizable(false);
dialog.addWindowListener(this);
dialog.setVisible(true);
I have tried not setting the size of dialog but it does not work. When I do not set the size of the dialog to (300,250), I get a very small dialog with nothing in it.
Any help in this regard would be greatly appreciated.
Thanks!

I hope there will not be any note for this.
Please follow the procedure.
Go to the domain and Check the domain where it is used and meke sure that it will effect all the tables where it is embeded.
If you want to change this leangth you have to take the OSS key for that hope you have service.sap login id right.
There you have to give the details of that domain object and go for the generate key.
The domain details you have to provide while generating the key .
these details we will call it as object directry enties.
Take all those things and give while you are genereating the key.
Hope you will do it.
Regards,
Madan.

Setting the bounds of a JPanel with double values

Hi,
I want to use a JPanel in my application, but the setBounds() method is limited to only int. Now I'm wondering if there is a way to set the bounds on the JPanel with doubles, so I can paint it for example x = 15.5;
I was thinking about override the setBounds method, but is this even possible without causing problems to other methods? Or is there an easier way?
Grtz

Encephalopathic wrote:
What is the purpose of this? Why are you using setBounds to begin with rather than layout managers?The reason I'm using absolute positioning is because the JPanels can be dragged to wherever they want. I can live with the fact that it isn't possible and solve it in another way, but I was just wondering if it is possible.

Setting the bounds to the panel

Similar Messages

Maybe you are looking for