Setting the function module from sap r/3 to EWM ?

Hi Gurus,
Here i have one question, that I have a FM that will cut first 5 digits of Track number,,,so my issue is that tracking number are comming from EWM to R/3 both are in different servers, EWM also SAP component,,,so now the same functionality i have to settup between the R/3 to EWM.
Pls advice guys,,,,,,,need to resolve it.
Thanks for your advice in advance

Thanks for reply,
Actually this functionality is modifyed for the DM( Third party) To sap R/3 FM name is Z_BV_DMPLUS_ORDER_SHIPPED .Right now is working for DM TO r/3.Now they want to use EWM for some plants insted DM+ , so data is comming to EWM from legacy and From EWM to R/3 have to setup work for the same functionality,,,,Let me if you need any more information ,,,,That cut of 15 OUT OF 22 and updating in Handling unit in VL02N,,,,that filed lenght is only 20,,,SO when the track number > 20 then cutting of 7 digits and rest of the digits has to update ,first 7 are accounting number of client.
I guess it is clear ,let me konow.
thanks

Similar Messages

How to debug Function Modules from ISA!!!

Hi Gurus,
How to debug the function modules from ISA.
For Ex:If i am in shopping cart or product catalog,e.t.c..i need to know which FM is calling from backend, how to debug the FMs/Bapis related to that from ISA side.
direct me to all the possible ways.
Regards,
Anil.

Hello Anil,
There are a few things you need to look at when trying to debug .
1. The function module needed ( you can do a trace to see which one is called.)
2. The user that is been user With statefull and stateless connection the FM can be called by either the JCO user or the internet user. This will need to be considered when setting your external break point.
3. The server been used, You will need to check the XCM to see which server is been used ie are you using a group connect of a specific server , You need to make sure that you are setting the breakpoint on the server that is specified in the XCM.
Have a look at note [871907|https://service.sap.com/sap/support/notes/871907] the attachment to the note may help you a lot. .
Hope this helps.
Regards
Mark
Edited by: Mark Foley on Feb 11, 2009 11:10 AM

Can i call a function module of SAP?

Hi, i have a question... Can i call a function module of SAP... I need print a document from a device, can i call the function module of SAP in order that me it prints it?
Thanks,

Hi Victor,
you can use the GenericSync Example of the MDK. This calls the Module to verify the user directly. Generic Sync is exactly for that purpose: call a BADI directly and no usage of SyncBO. Be aware, that you - out of the box- sync your app data as well at that moment, because a sync runs both - generic and smartsync. Even worse: even when you have nothing to sync in Generic Sync - so nothing to print - it will call the function module for generic sync as long as it is registered.
Well, anyway, this is the way to call a function module separate.
If it works with you rparticular print module? I have no idea, but if this is a normal function module - well, it should be ok.
Hope this helps.
Regards,
Oliver

Can we call Function Module from Process Chain?

Hello experts,
I have a small question.
Can we call Function Module(SE37) from Process Chain?
If yes can you please provide some example link?
I m new to BI world.
regards

Hi,
Create one ABAP program and call the function module from that program. Check the link to know how to call a function module from an ABAP program.
http://help.sap.com/saphelp_wp/helpdata/en/d1/801edb454211d189710000e8322d00/content.htm
http://help.sap.com/saphelp_wp/helpdata/en/9f/db98ef35c111d1829f0000e829fbfe/content.htm
Then use process type "ABAP Program" in your process chain and add the program you have created. So then this program will be executed via process chain and this program will call the function module.
Indrashis

Copy the Function Module one server to another server

Hi Guy's,
Please help me How to copy the Function module from one server to another server.
Present requirement is like this, copy the FM from DRH-100 to NRH-100.
Thanks and Regards,
Sai

if it is a zfm, u might have assigned a TR when cretaing this FM.so u need to relese this TR to the desired system.contact ur BASIS for the transport lanscape.
if it is a standard FM, u better copy this FM to a ZFM and make it as RFC enabled if it is not RFC enabled and call this ZFM from the system in which want to call this FM by giving the logical system id in the destination while calling this FM.

How to get the "last changed by" for a set of function modules?

How to get the "last changed by" for a set of function modules?
is there any table to get it??

See [this|Re: Date of creation of function module] I posted earlier.
>TFDIR will give you the name of the function group program and the include number.
>E.g. SAPLZFUNCGROUP Include 01.
>From this you can construct the include name: LZFUNCGROUPU01.
>You can look this up in TRDIR to find the creation date (CDAT) of the function module.
In your case, you need unam and udat.
matt

How to call a function module from the Web Template?

Hi all,
how can I call a function module from a BI 7.x web template and then show the result of the FM on the web template?
Many thanks for your hints.
Regards, Nils

Hi!
I am too working on a similar issue.
Probably this helps:
Re: Calling a function module from a Web Template
Regards,
Sri

Function modules from the function pool Z_MEREP_G (Message no. MEREP_00530)

We installed a new system and imported the syncbo definitions to this new system.
After the import and generation of all T01 SyncBOs we get an error. E.g. for MAM25_016:
Function modules from the function pool Z_MEREP_GEN_T01_MAM25_016 contain syntax errors
Message no. MEREP_00530
After investigation the following syntax error is shown:
Source code LZ_MEREP_GEN_T01_MAM25_016U04 Line 641
The FORM "MAM25_016_CONV_NAME" does not exist, but there is a FORM with the similar name "MAM25_016_I_CONVERSION".
"MAM25_016_I_CONVERSION".
We are already using three systems D -> Q -> P. The export/import of files between these systems work okay. But not with the new system. All are on NW04 SPS 18. In the other systems the form is available.
Does someone have an idea how to solve this?
Thanks in advance,
Benjamin de Rijke

Hello Rahul / Karthick,
Thanks for the tip, I already reimported these with no effect. Next to this I deleted the function modules for a Z-syncbo (our own developed one). But this didn't help as well. The MAM-SyncBO function group can not be deleted because the system is not a developement system. We are not allowed to develop things in this environment.
I have the feeling that it has something to do with the initial setup of this system. All the others were first on SPS15 were we developed the SyncBOs. At a certain time we updated the systems to SPS18 and developed further. No issues so far regarding the import / export of the files from D to Q and P.
Now we initial installed a new system on SPS18 and on this one the generation failes with the mentioned syntax error.
Kind regards,
Benjamin

Identify tables from where the function module extracts data for the ES

Hi All,
For the datasource, 0CRM_SALES_ORDER_I in the CRM system, we need to add a new field (in the table level). This datasource's extraction type is 'F1 - function module'. Is the extractor itself is this function module? If it is a sepeate FM, where can we find the function module name used for this datasource?
We need to identify the tables from where the fields in this datasource fetch data from. Where can we find this information?
To be specific, in the sales order in tcode crmd_order, if we goto conditions tab and create a new condition, in what table this will get stored?
Thank you in advance,
Hari

Ignore this thread! there is another thread I have created for the same problem.
I created only one; wonder how it became two!!

Not able to use Commit after the function module STATUS_OBJECT_CREATE

I am using function module   STATUS_OBJECT_CREATE
   CALL FUNCTION 'STATUS_OBJECT_CREATE'
          EXPORTING
           CHGKZ         = 'X'
           CLIENT        = SY-MANDT
            OBJNR         = LV_OBJNR3
            OBTYP         = 'IWE'
            STSMA         = 'ZS_RE_01'
          IMPORTING
            OBJNR         = LV_OBJNR3.
            STONR                        = LV_STONR.
        IF SY-SUBRC = 0.
            COMMIT WORK.
        ENDIF.
i am getting error after the COMMIT WORK .
I am not getting any issue in the function module .after the function module i am using the COMMIT WORK and i am getting the following error message
Category               ABAP Programming Error
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
ABAP Program           SAPLBSVU
Application Component CA-GTF-TS-SMT
Date and Time          03/17/2014 07:01:29
|Short text                                                                                        |
|    The ABAP/4 Open SQL array insert results in duplicate database records.                       |
|What happened?                                                                                    |
|    Error in the ABAP Application Program                                                         |
|                                                                                                  |
|    The current ABAP program "SAPLBSVU" had to be terminated because it has                       |
|    come across a statement that unfortunately cannot be executed.                                |
|What can you do?                                                                                  |
|    Note down which actions and inputs caused the error.                                          |
|                                                                                                  |
|                                                                                                  |
|    To process the problem further, contact you SAP system                                        |
|    administrator.                                                                                |
|                                                                                                  |
|    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
|    at and manage termination messages, and you can also                                          |
|    keep them for a long time.                                                                    |
|Error analysis                                                                                    |
|    An exception occurred that is explained in detail below.                                      |
|    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught                 |
|     in                                                                                           |
|    procedure "STATUS_UPDATE" "(FUNCTION)", nor was it propagated by a RAISING                    |
|     clause.                                                                                      |
|    Since the caller of the procedure could not have anticipated that the                         |
|    exception would occur, the current program is terminated.                                     |
|    The reason for the exception is:                                                              |
|    If you use an ABAP/4 Open SQL array insert to insert a record in                              |
|    the database and that record already exists with the same key,                                |
|    this results in a termination.                                                                |
|                                                                                                  |
|    (With an ABAP/4 Open SQL single record insert in the same error                               |
|    situation, processing does not terminate, but SY-SUBRC is set to 4.)                          |
|How to correct the error                                                                          |
|    Use an ABAP/4 Open SQL array insert only if you are sure that none of                         |
|    the records passed already exists in the database.                                            |
|                                                                                                  |
|    If the error occures in a non-modified SAP program, you may be able to                        |
|    find an interim solution in an SAP Note.                                                      |
|    If you have access to SAP Notes, carry out a search with the following                        |
|    keywords:                                                                                     |
|                                                                                                  |
|    "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"                                              |
|    "SAPLBSVU" or "LBSVUU01"                                                                      |
|    "STATUS_UPDATE"                                                                               |
|                                                                                                  |
|    If you cannot solve the problem yourself and want to send an error                            |
|    notification to SAP, include the following information:                                       |
|                                                                                                  |
|    1. The description of the current problem (short dump)                                        |
|                                                                                                  |
|       To save the description, choose "System->List->Save->Local File                            |
|    (Unconverted)".                                                                               |
|                                                                                                  |
|    2. Corresponding system log                                                                   |
|                                                                                                  |
|       Display the system log by calling transaction SM21.                                        |
|       Restrict the time interval to 10 minutes before and five minutes                           |
|    after the short dump. Then choose "System->List->Save->Local File                             |
|    (Unconverted)".                                                                               |
|                                                                                                  |
|    3. If the problem occurs in a problem of your own or a modified SAP                           |
|    program: The source code of the program                                                       |
|       In the editor, choose "Utilities->More                                                     |
|    Utilities->Upload/Download->Download".                                                        |
|                                                                                                  |
|    4. Details about the conditions under which the error occurred or which                       |
|    actions and input led to the error.                                                           |
|                                                                                                  |
|    The exception must either be prevented, caught within proedure                                |
|    "STATUS_UPDATE" "(FUNCTION)", or its possible occurrence must be declared in                  |
|     the                                                                                          |
|    RAISING clause of the procedure.                                                              |
|    To prevent the exception, note the following:                                                 |
|System environment                                                                                |
|    SAP Release..... 702                                                                          |
|    SAP Basis Level. 0010                                                                         |
|                                                                                                  |
|    Application server... "sds6ci"                                                                |
|    Network address...... "11.224.101.53"                                                         |
|    Operating system..... "Linux"                                                                 |
|    Release.............. "2.6.18-194.el5"                                                        |
|    Hardware type........ "x86_64"                                                                |
|    Character length.... 16 Bits                                                                  |
|    Pointer length....... 64 Bits                                                                 |
|    Work process number.. 17                                                                      |
|    Shortdump setting.... "full"                                                                  |
|                                                                                                  |
|    Database server... "gctsdb01lds.hsi.hugh"                                                     |
|    Database type..... "ORACLE"                                                                   |
|    Database name..... "DS6"                                                                      |
|    Database user ID.. "SAPDS4"                                                                   |
|                                                                                                  |
|    Terminal.......... "GCTEMP02VDI"                                                              |
|                                                                                                  |
|    Char.set.... "C"                                                                              |
|                                                                                                  |
|    SAP kernel....... 720                                                                         |
|    created (date)... "Sep 14 2013 05:28:14"                                                      |
|    create on........ "Linux GNU SLES-9 x86_64 cc4.1.2 use-pr130820"                              |
|    Database version. "OCI_102, 10.2.0.5.0, V2, default"                                          |
|                                                                                                  |
|    Patch level. 500                                                                              |
|    Patch text.. " "                                                                              |
|                                                                                                  |
|    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"               |
|    SAP database version. 720                                                                     |
|    Operating system..... "Linux 2.6, Linux 3"                                                    |
|                                                                                                  |
|    Memory consumption                                                                            |
|    Roll.... 1317248                                                                              |
|    EM...... 0                                                                                    |
|    Heap.... 0                                                                                    |
|    Page.... 0                                                                                    |
|    MM Used. 1242912                                                                              |
|    MM Free. 53400                                                                                |
|User and Transaction                                                                              |
|    Client.............. 160                                                                      |
|    User................ "DV018458"                                                               |
|    Language key........ "E"                                                                      |
|    Transaction......... "SE38 "                                                                  |
|    Transaction ID...... "5323C30FC9364665E10000000BE06533"                                       |
|                                                                                                  |
|    EPP Whole Context ID.... "002655EE0F241ED3ABB7D81260A28C44"                                   |
|    EPP Connection ID....... 00000000000000000000000000000000                                     |
|    EPP Caller Counter...... 0                                                                    |
|                                                                                                  |
|    Program............. "SAPLBSVU"                                                               |
|    Screen.............. "RSM13000 3000"                                                          |
|    Screen Line......... 2                                                                        |
|    Debugger Active..... "none"                                                                   |
|Information on where terminated                                                                   |
|    Termination occurred in the ABAP program "SAPLBSVU" - in "STATUS_UPDATE".                     |
|    The main program was "RSM13000 ".                                                             |
|                                                                                                  |
|    In the source code you have the termination point in line 60                                  |
|    of the (Include) program "LBSVUU01".                                                          |
|    The program "SAPLBSVU" was started in the update system.                                      |
|    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in                   |
|    procedure "STATUS_UPDATE" "(FUNCTION)", but it was neither handled locally nor                |
|     declared                                                                                     |
|    in the RAISING clause of its signature.                                                       |
|                                                                                                  |
|    The procedure is in program "SAPLBSVU "; its source code begins in line                       |
|    1 of the (Include program "LBSVUU01 ".                                                        |
|Source Code Extract                                                                               |
|Line |SourceCde                                                                                   |
|   30| LOOP AT jsto_upd WHERE chgkz = 'X'.                                                       |
|   31|    CHECK: jsto_upd-chgnr > '000',                                                          |
|   32|           jsto_upd-stsma NE jsto_upd-stsma_old.                                            |
|   33|    CLEAR jcdo_tab.                                                                         |
|   34|    MOVE-CORRESPONDING jsto_upd TO jcdo_tab.                                                |
|   35|    MOVE-CORRESPONDING chdat    TO jcdo_tab.                                                |
|   36|    jcdo_tab-stsma_new = jsto_upd-stsma.                                                    |
|   37|    APPEND jcdo_tab.                                                                        |
|   38| ENDLOOP.                                                                                  |
|   39|* Änderungen zu Einzelstatus (Insert)                                                       |
|   40| LOOP AT jest_ins WHERE chgkz = 'X'.                                                       |
|   41|    CHECK jest_ins-chgnr > '000'.                                                           |
|   42|    CLEAR jcds_tab.                                                                         |
|   43|    MOVE-CORRESPONDING jest_ins TO jcds_tab.                                                |
|   44|    MOVE-CORRESPONDING chdat    TO jcds_tab.                                                |
|   45|    jcds_tab-chind = 'I'.                                                                   |
|   46|    APPEND jcds_tab.                                                                        |
|   47| ENDLOOP.                                                                                  |
|   48|* Änderungen zu Einzelstatus (Update)                                                       |
|   49| LOOP AT jest_upd WHERE chgkz = 'X'.                                                       |
|   50|    CHECK jest_upd-chgnr > '000'.                                                           |
|   51|    CLEAR jcds_tab.                                                                         |
|   52|    MOVE-CORRESPONDING jest_upd TO jcds_tab.                                                |
|   53|    MOVE-CORRESPONDING chdat    TO jcds_tab.                                                |
|   54|    jcds_tab-chind = 'U'.                                                                   |
|   55|    APPEND jcds_tab.                                                                        |
|   56| ENDLOOP.                                                                                  |
|   57|* Verbuchung Statusobjekte                                                                  |
|   58| DESCRIBE TABLE jsto_ins LINES sy-tabix.                                                   |
|   59| IF sy-tabix > 0.                                                                          |
|>>>>>|    INSERT jsto CLIENT SPECIFIED                                                            |
|   61|                FROM TABLE jsto_ins.                                                        |
|   62| ENDIF.                                                                                    |
|   63| DESCRIBE TABLE jsto_upd LINES sy-tabix.                                                   |
|   64| IF sy-tabix > 0.                                                                          |
|   65|    field-symbols <fs_jsto_line> like jsto_upd.                                             |
|   66|    loop at jsto_upd assigning <fs_jsto_line>.                                              |
|   67|      IF <fs_jsto_line>-chgnr = '000'.                                                      |
|   68|        <fs_jsto_line>-chgnr = '999'.                                                       |
|   69|      ENDIF.                                                                                |
|   70|* on change of status profile delete user status related to old profile                     |
|   71|      IF <fs_jsto_line>-STSMA NE <fs_jsto_line>-STSMA_OLD.                                  |
|   72|        DELETE FROM JEST CLIENT SPECIFIED WHERE                                             |
|   73|               MANDT = <fs_jsto_line>-MANDT AND                                             |
|   74|               OBJNR = <fs_jsto_line>-OBJNR AND                                             |
|   75|               STAT LIKE 'E%'.                                                             |
|   76|        DELETE FROM JCDS CLIENT SPECIFIED WHERE                                             |
|   77|               MANDT = <fs_jsto_line>-MANDT AND                                             |
|   78|               OBJNR = <fs_jsto_line>-OBJNR AND                                             |
|   79|               STAT LIKE 'E%'.                                                             |

i tried with out using commmit but it is not creating Status.
When i see the function module help and they are trying to COMMIT
FU STATUS_OBJECT_CREATE
Short Text
Create Status Object
Functionality
The function module generates a status object.
Take the object number from the object number management (function modules OBJECT_NUMNBER_GET_xx).
If no object number is given, the module takes a temporary object number that must be replaced later (function module STATUS_OBJECT_SWITCH_NUMBER).
Example
Creating an internal order with number 100123 (object type "ORC") for status profile "STATSCHEM" with final object number
call function 'OBJECT_NUMBER_GET_OR'
exporting
    aufnr = '100123'
importing objnr = objektnummer.
call function 'STATUS_OBJECT_CREATE'
exporting
    objnr = objektnummer
    obtyp = 'ORC'
    stsma = 'STATSCHEM'.
commit work.
Creating the same order with a temporary object number
data: objectkey like ionra.
* TBO00-REFSTRUCT for object type 'OR' is 'IONRA'
objectkey-aufnr = '100123'.
call function 'STATUS_OBJECT_CREATE'
exporting
    i_objectkey = objectkey
    obtyp       = 'ORC'
    stsma       = 'STATSCHEM'.
importing
    objnr       = objektnummer.
call function 'OBJECT_NUMBER_GET_OR'
exporting
    aufnr = '100123'
importing objnr = objektnummer_neu.
call function 'STATUS_OBJECT_SWITCH_NUMBER'
exporting
    objnr_old = objektnummer
    objnr_new = objektnummer_neu.
commit work.
Notes

What are the function modules used in interactive ALV and parameters?

what are the function modules used in interactive ALV and parameters?

hi sunil
check these links,
About ALV:
http://www.geocities.com/mpioud/Abap_programs.html
ALV Group Heading
http://www.sap-img.com/fu037.htm
and few more,
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
also run the folowing code and see
check this sample code.you will be well versed with all the events of a interactive alv report.mark points if useful.
*& Report ZALV4_INTERACTIVE *
*& interactive alvs *
REPORT ZALV4_INTERACTIVE NO STANDARD PAGE HEADING
MESSAGE-ID ZMSG
LINE-COUNT 37(3)
LINE-SIZE 134.
TYPE-POOLS : SLIS.
TABLES DECLARATION ********************
TABLES : VBRK, " BILLING MASTERS TABLE
VBRP. " BILLING ITEM TABLE
TYPES DECLARATION ********************
TYPES : BEGIN OF TY_VBRK, " types for billing masters table
VBELN TYPE VBRK-VBELN, " billing document
WAERK TYPE VBRK-WAERK, " document currency
VKORG TYPE VBRK-VKORG, " sales organization
FKDAT TYPE VBRK-FKDAT, " billing date
BUKRS TYPE VBRK-BUKRS, " company code
BUTXT TYPE T001-BUTXT, " company name
NETWR TYPE VBRK-NETWR, " net currency value
LINE_COLOR(4) TYPE C,
END OF TY_VBRK.
TYPES : BEGIN OF TY_VBRP, " types for billing document item data
POSNR TYPE VBRP-POSNR, " billing item
FKIMG TYPE VBRP-FKIMG, " actual invoiced quantitty
VRKME TYPE VBRP-VRKME, " sales unit
NETWR TYPE VBRP-NETWR, " net currency value
MATNR TYPE VBRP-MATNR, " material number
ARKTX TYPE VBRP-ARKTX, " short text for sales order item
END OF TY_VBRP.
FIELD CATALOG ********************
DATA : WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
WA_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
LAYOUT DECLARATION ********************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_LAYOUT1 TYPE SLIS_LAYOUT_ALV.
EVENTS DECLARATION ********************
DATA : TY_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
PF STATUS ********************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
USER COMMAND ********************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
INTERNAL TABLES ********************
DATA : IT_VBRK TYPE TABLE OF TY_VBRK, "internal table for billing master
IT_VBRP TYPE TABLE OF TY_VBRP, "internal table for billing item
*internal table for field catalog
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
WORK AREA ********************
DATA : WA_VBRK LIKE LINE OF IT_VBRK, "work area for billing master
WA_VBRP LIKE LINE OF IT_VBRP. "work area for billing item
VARIABLE DECLARATION ********************
DATA : V_DATE TYPE SY-DATUM, " variable to store date values
V_VBELN TYPE VBRK-VBELN, " variable for billing document
V_FKDAT TYPE VBRK-FKDAT, " variable for billing date
V_FLAG(1). " variable for flag
SELECTION SCREEN ********************
SELECT-OPTIONS : S_VBELN FOR VBRK-VBELN , " Billing document
S_FKDAT FOR VBRK-FKDAT, " Billing date
S_MATNR FOR VBRP-MATNR. " Material number
PARAMETERS : R1 RADIOBUTTON GROUP G1, "whole item details
R2 RADIOBUTTON GROUP G1. "selected item details
INITIALIZATION ********************
INITIALIZATION.
V_FLAG = 'X'.
V_DATE = SY-DATUM - 20.
S_FKDAT-SIGN = 'I'.
S_FKDAT-OPTION = 'EQ'.
S_FKDAT-LOW = V_DATE.
S_FKDAT-HIGH = SY-DATUM.
APPEND S_FKDAT.
SELECTION SCREEN VALIDATION ********************
AT SELECTION-SCREEN.
PERFORM CONVERSION. " performs data conversion for input
PERFORM VBELN_VALIDATE. " validating the billing document
PERFORM FKDAT_VALIDATE. " validating the billing date
START OF SELECTION ********************
START-OF-SELECTION.
SET TITLEBAR 'AAAA'.
PERFORM VBRK_POPULATE. " populating the billing master detais
PERFORM FIELDCATALOG. " designing the field catalog
PERFORM EVENTS. " performing the events for top of page
PERFORM DISP_BASICLIST." displaying the basic list
*& Form VBELN_VALIDATE
text validating the billing document
--> p1 text
<-- p2 text
FORM VBELN_VALIDATE .
IF S_VBELN IS INITIAL.
MESSAGE E000 WITH 'Make entries in all required fields'.
ELSE.
SELECT SINGLE VBELN
FROM VBRK
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'BILLING DOCUMENT DOESNT EXIST'.
ENDIF.
ENDIF.
ENDFORM. " VBELN_VALIDATE
*& Form FKDAT_VALIDATE
text validating the billing date
--> p1 text
<-- p2 text
FORM FKDAT_VALIDATE .
SELECT SINGLE FKDAT
FROM VBRK
INTO V_FKDAT
WHERE FKDAT IN S_FKDAT.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'BILLING DATE DOESNT EXIST'.
ENDIF.
ENDFORM. " FKDAT_VALIDATE
*& Form VBRK_POPULATE
text populating the billing master details
--> p1 text
<-- p2 text
FORM VBRK_POPULATE .
DATA : LD_COLOR(1) TYPE C.
LD_COLOR = 5.
SELECT VBRK~VBELN
VBRK~WAERK
VBRK~VKORG
VBRK~FKDAT
VBRK~BUKRS
VBRK~NETWR
T001~BUTXT
FROM VBRK INNER JOIN T001
ON VBRKBUKRS = T001BUKRS
INTO CORRESPONDING FIELDS OF TABLE IT_VBRK
WHERE VBRK~VBELN IN S_VBELN AND
VBRK~FKDAT IN S_FKDAT.
LOOP AT IT_VBRK INTO WA_VBRK.
LD_COLOR = LD_COLOR + 1.
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_VBRK-LINE_COLOR.
MODIFY IT_VBRK FROM WA_VBRK.
ENDLOOP.
ENDFORM. " VBRK_POPULATE
*& Form CONVERSION
text data conversion to take leading zeroes into account
--> p1 text
<-- p2 text
FORM CONVERSION .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = S_VBELN
IMPORTING
OUTPUT = S_VBELN.
ENDFORM. " CONVERSION
*& Form DISP_BASICLIST
text displaying the basic list
--> p1 text
<-- p2 text
FORM DISP_BASICLIST .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBRK
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISP_BASICLIST
*& Form FIELDCATALOG
text designing the field catalog
--> p1 text
<-- p2 text
FORM FIELDCATALOG .
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_L = 'BILLING DOCUMENT'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-EMPHASIZE = 'C610'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'WAERK'.
WA_FIELDCAT-SELTEXT_L = 'DOCUMENT CURRENCY'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'VKORG'.
WA_FIELDCAT-SELTEXT_L = 'SALES ORGANIZATION'.
WA_FIELDCAT-EMPHASIZE = 'C610'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'FKDAT'.
WA_FIELDCAT-SELTEXT_L = 'BILLING DATE'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_L = 'COMPANY CODE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'BUTXT'.
WA_FIELDCAT-SELTEXT_L = 'COMPANY NAME'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'NETWR'.
WA_FIELDCAT-SELTEXT_L = 'NET CURRENCY VALUE'.
WA_FIELDCAT-COL_POS = 7.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
ENDFORM. " FIELDCATALOG
*& Form SET_PF_STATUS
text set the pf status
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50658_PFSTATUS' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text set the user command
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'CLICK'.
IF R1 = 'X'.
IF NOT IT_VBRK IS INITIAL.
SELECT POSNR
FKIMG
VRKME
NETWR
MATNR
ARKTX
FROM VBRP
INTO CORRESPONDING FIELDS OF TABLE IT_VBRP
FOR ALL ENTRIES IN IT_VBRK
WHERE VBELN = IT_VBRK-VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH ' NO BILLING DETAILS FOUND'.
ELSE.
IF V_FLAG = 'X'.
PERFORM DET_FIELDCATALOG.
V_FLAG = ''.
ENDIF.
PERFORM DET_LISTDISPLAY.
ENDIF.
ENDIF.
ENDIF.
IF R2 = 'X'.
READ TABLE IT_VBRK INTO WA_VBRK INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE POSNR
FKIMG
VRKME
NETWR
MATNR
ARKTX
FROM VBRP
INTO CORRESPONDING FIELDS OF WA_VBRP
WHERE VBELN = WA_VBRK-VBELN.
ENDIF.
APPEND WA_VBRP TO IT_VBRP.
ENDIF.
IF V_FLAG = 'X'.
PERFORM DET_FIELDCATALOG. "designing the field catalog for items
V_FLAG = ''.
ENDIF.
PERFORM DET_LISTDISPLAY. "displaying the secondary list
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'UP'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CALL TRANSACTION 'SE38'.
ENDCASE.
ENDFORM. "SET_USER_COMMAND
*& Form DET_FIELDCATALOG
text designing the field catalog for item details
--> p1 text
<-- p2 text
FORM DET_FIELDCATALOG .
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'POSNR'.
WA_FIELDCAT1-SELTEXT_L = 'BILLING ITEM'.
WA_FIELDCAT1-COL_POS = 1.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'FKIMG'.
WA_FIELDCAT1-SELTEXT_L = 'INVOICE QUANTITY'.
WA_FIELDCAT1-COL_POS = 2.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'VRKME'.
WA_FIELDCAT1-SELTEXT_L = 'SALES UNIT'.
WA_FIELDCAT1-COL_POS = 3.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'NETWR'.
WA_FIELDCAT1-SELTEXT_L = 'NET CURRENCY VALUE'.
WA_FIELDCAT1-COL_POS = 4.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'MATNR'.
WA_FIELDCAT1-SELTEXT_L = 'MATERIAL NUMBER'.
WA_FIELDCAT1-COL_POS = 5.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'ARKTX'.
WA_FIELDCAT1-SELTEXT_L = 'SALES ORDER ITEM'.
WA_FIELDCAT1-COL_POS = 6.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_LAYOUT1-ZEBRA = 'X'.
ENDFORM. " DET_FIELDCATALOG
*& Form DET_LISTDISPLAY
text displaying the secondary list
--> p1 text
<-- p2 text
FORM DET_LISTDISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT1
IT_FIELDCAT = IT_FIELDCAT1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBRP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR IT_VBRP[].
ENDFORM. " DET_LISTDISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR TY_EVENTS.
TY_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
TY_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND TY_EVENTS TO IT_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
SKIP.
ULINE.
WRITE :/2 ' DATE :', SY-DATUM,
45 'INTELLIGROUP ASIA PVT LTD',
110 'TIME :', SY-UZEIT.
WRITE : /3 'USER :', SY-UNAME,
45 'TITLE :', SY-TITLE,
110 'PAGE :', SY-PAGNO.
ULINE.
SKIP.
ENDFORM. "TOP_OF_PAGE
Cheers
navjot
Reward with points if it is helpful
Message was edited by:
navjot sharma

Call ABAP function module from script?

Hi,
I have an ABAP function module, which works fine when I call it in a transformation.
Since I don't need to execute this function for each record but rather for each file I process, I would like to move the call from the DataFlow to a script in the WorkFlow. When I click on the 'functions' button the ABAP FM is available in my SAP Datastore, so I drag and drop it into my script. I also make sure to populate all required variables.
There are no error messages or warning when I check my job definition.
When I execute it, I get the following RFC error:
Function call <xxx ( abcd ) > failed, due to error <150413>: <RFC CallReceive exception <FUNCTION_NOT_FOUND>.>.
Is it just not possible to call an RFC enabled function module in SAP from a script or am I doing something wrong here?
Thanks,
Jan.

Could you please let me know how I can call an abap function module from a transformation? (from abap xslt program). I know how we can call methods of a class from the transformations, but no idea how we can call function modules. Any suggestions or a sample code snippet towards this will be very useful for me.
Thanks,
Shashi.

Jobs to run the function modules to extract the generic extarctors

Gurus,
I have a Datasource 'ZCMS_PP_TRAN' with extract structure 'ZBW_ST_CMSD_PP'. The extract structure is populated using the function module Z_BW_GET_CMSD_PP.
But how do I schedule this FM or in general, are they run using std programs?
Thanks,
Simmi

Hi Simmi,
what ever it may be the DS(i mean Business Content DS, Generic DS).... these will extract the Data using Dynamic Function Calls(not always). Comming to Generic DS using FM, this will be called using Dynamic Function Module.
In RSA3 or while extracting data from BW, you will pass request number, Update Mode, debugging option, selection fields, BW source System ID, DS Name.
Based on these details system will extract the underlying extract structure and function module(or table/view/infoset).
No job(Job created from BW while extracting data in the source system BI_requestid) created for Generic DS while extracting data in SAP.
For Queue Delta, Background job will be created, it will move the data to Delta Queue.
i will update the thread with related function modules. Try to debugg in RSA3, you could find all the information.
all the best.
Nagesh.

Debugging RFC function module from ECC to CRM

Hi All,
My requirement is to debug an RFC function module present in CRM(7.0) system from ECC(6.0) system. A report program in ECC will call CRM custom FM. I found many posts in SDN with the same issue and tried to implement suggestions provided there. But I couldn't succeed. The approach I followed is:
I logged in to ECC report program and kept an external breakpoint just before the function module call.
I logged in to CRM system, opened the function module and kept an external breakpoint there.
In both the systems I provided the dialogue userid( id through which I log in to SAPGUI) in the system->settings->debugging option.
In CRM I activated the external break point in transaction SRDEBUG.
Now when I execute the report program in ECC, control stops at the breakpoint. If I press F5 at the function call, control is not going to the external break point set in the CRM FM. I am getting output of FM directly.
I tried with different settings like turning on the check box for IP matching and session breakpoint active immediate, switching to classic debugger etc. I also tried to provide the RFC user id instead of dialogue user but system throws exception saying only dialogue userids are allowed. I found that by inserting an infinite loop statement, control goes inside the RFC CRM FM but I prefer not to change the code.
Please let me know if I missed anything.
Thanks and Regards,
Naren

Hi,
Debug RFC calls
When an RFC function module is called it is usually not possible to debug the call, using the below techniques we can achieve the same. For this example we are calling an RFC enabled FM in ECC system from CRM system.
Scenario 1: Calling a custom RFC FM
STEP 1: Add an infinite loop in the remote custom Function Module (adding a u201CDO. ENDDO.u201D statement at the start of the FM would be enough).
STEP 2: Execute your program in the CRM system. The execution stops at the RFC call, because of the infinite loop.
STEP 3: Now login to the ECC system and go to transaction SM51 select the process which is executing the RFC and navigate to the menu: u201CProgram/Session->Program->Debuggingu201D this triggers the debugger session in a separate window.
Scenario 2: Calling a Standard RFC FM
When we are debugging a standard program we cannot add the infinite loop, hence we cannot go to SM51 and debug the work process. The RFC destination for the ECC system has a User specified, the RFC function module gets executed using this users credentials. Usually the basis team set up the RFC user as non Dialog user, this does not allow debugging. Contact your Basis team and get this changed to a dialog user enabling you to debug RFC function calls via the normal debugger.
Note: User name configured in the RFC destination (transaction SM59)
Note: User type for the RFC User (transaction SU01D)
Hope this will be helpful..

RFC Error while trying to access function module from business connector

Hi,
I am getting the following RFc exceptions in BC server when we invoke the service pub.sap.client:invoke fail as a flow step in Idoc_Status_Add(this service is calling a function module in sap namely ZYBC_IDOC_STATUS_ADD_FROM_BC which Adds status to Idoc (from Business Connector).But no trace of failures are recorded in sap side
except 1: rfc_failure in BC trace files under monitoring.I need to know the root cause of these errors as the same services have run finely later and IDOCs were also processed successfully without any problem.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: See RFC trace file or SAP system log for more details
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1217)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3684)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3129)
at com.wm.pkg.sap.rfc.SAPSession.invoke(SAPSession.java:437)
at pub.sap.client.invoke(client.java:297)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
could anyone throw light on how this kind of error can be resolved and why it occured?
Thanks.

What does the RFC trace file and log say? Has there been any dump on the SAP server? Check the logs and transaction st22 in your SAP system to see if the RFC-module has dumped.
My guess is the problem is in the RFC-module, I think you should start looking there.
regards,
Dionisios

Setting the function module from sap r/3 to EWM ?

Similar Messages

Maybe you are looking for