Setting track for a captivate course

Does anyone know if you can set up "tracks" for a captivate course in the LMS.
I have a course with a lesson that is only applicable to certain group of learners and we dont want the rest of the company to view that information.
Our LMS does have the capability to set up tracks for courses created directly in the LMS system, but I originally created the course using captivate instead.
Any advice is greatly appreciated.

If it is critical that one role does NOT see what the other role should see (e.g. for security reasons) then you need to have three separate versions of the course and set up your LMS to determine which role the person belongs to so that the only choice they get is the one appropriate for them.  Most LMSs allow you to configure role-based learning this way.  You add people to the roles set up in the LMS and that controls the learning options they see.
Doing what I suggested in Captivate is really just a way to have slightly personalised content for different roles inside the same project file.  But the downside is that when you get to the quiz, everyone has to do the same questions, otherwise your quiz score can never be 100%.  Then you'd need to resort to using a target for points scored instead of a percentage out of 100.

Similar Messages

  • Setting tracks for a dj set recorded in logic

    Hi im a DJ and I record my sets in logic. My problem I dont know how to set track markers in my mix so when I burn it and play it on a cd player my mix is one long track. How would I go about putting the correct markers in my mix so when you play it you can navigate through it track 1,2,3 etc? Can anyone please help me with this problem because its making my mix tapes come out very unprofessional.

    use Waveburner
    http://documentation.apple.com/en/waveburner/usermanual/#chapter=1%26section=0
    A

  • How to set up Multiple Playback tracks for a "Set" or "Concert"?

    Hey Gang...so I'm venturing into MS2(2.2.1) now and have a feeling I just need some help understanding the building blocks.  Here is what I'm trying to do:
    I want to set up a concert for solo gigs where I basically will perform saxophone along with backing tracks (audio).  On some tunes I use an EWI, and on others I use different saxes (EQed diff, with diff EFX, so on).  SO, I want to create "patches" for each song, and have that "patch" contain the midi sound (for EWI) or settings for the diff saxes. 
    Here is the important part:  I also need each individual "patch" to playback a different back-track. 
    I have started all this with the tune "Summer Madness", and here is the problem:  When I switch to a new "patch", I still get Summer Madness.  If I load a different BT into playback, that track is then "universal" through ALL "patches".  It must be something simple, but what am I missing?  Do I have to create multiple channel strips with the playback plugin loaded (seems awefully designed, and a waste of resources?) and assign DIFFERENT controller buttons (or whatever) to playback different tracks? (again, aweful, and a complete waste of midi controller real estate).
    If I have explained all that poorly, my appologies.  I just am hoping MS2 has a way of "auto-loading" a new BT everytime I switch to a new "patch".  I cannot seem to figure this one out.  Any help is greatly appreciated!
    Thanks.

    Hi
    Depending on your needs, you may find that Set level offers the best approach:
    Within a Set you have the Playbacks (Set Level, so they work for the entire set) with individual patches in the set "live" for the EWI etc as needed.
    You need only map one set of controls for all the Playbacks since only 1 set can run at a time.
    CCT

  • Set default audio track for playback in Source monitor

    So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
    They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
    My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
    Thanks!

    I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

  • Creating a Search form for Captivate courses

    I've been asked to create a search form for our online courses. We do not use the TOC in our courses so the Find field in the TOC is not an option. Here are the ideas I've had so far:
    a Javascript-powered form search
    a search form widget
    a Google search embedded into the surrounding HTML page (But I don't think that Google can "see" text inside the Captivate SWF object...)
    Right now, we are using Captivate 5.5, but do plan to move to Captivate 6.0 fairly soon. I'm grateful for any ideas.
    Thanks!
    Peter

    You're hitting a bug. See ADF Faces Classical Search Form works only with Entity base VO  in JDev 11? for a workaround suggestion.

  • T5SSCXSSSERVICES - Set Data Tracking for Individual Self-Services

    Hi,
    We have a requirement for BI Report to fetch data from table :T5SSCXSSSERVICES
    The above table could be filled with data when we perform any activities in ESS and MSS.
    I wanted to know what are all required configuration to get data in to the table T5SSCXSSSERVICES
    I understand below mentioned configuration are required:
    IMG Node 1: Activate Data Tracking for All Self-Services
    IMG Node2: Set Data Tracking for Individual Self-Services
    Is it required to activate Business FunctionS et - HR Administartive Servcices?
    Guide me with more inputs,
    Regards
    Ramanathan

    Hi Ramanathan,
    I am facing the same doubt now, are you able to share your experience on how to populate  T5SSCXSSSERVICES ? Appreciate that, and thank you in advance.
    Regards
    Kir Chern

  • How to create a TOC for my captivate scorm

    Hi,
    I am trying to use Captivate 2 to convert a 50 slide
    powerpoint presentation into a V1.2 SCORM object .
    The object opens when I publish and upload to my site, but it
    only shows 1 entry (for the 1st slide) in the table of contents.
    I guess the ppt is OK - I get a 50 entry TOC when I publish
    the ppt as a webfile, so I guess I need to set a parameter in
    Captivate 2 before I publish my Scorm in Captivate.
    I cant see anything to set (but as a real novice, its quite
    possible that Im missing something obvious?)
    Can someone please help out - Im real stuck at the moment.,
    Thanks
    Martin

    I am using Captivate 2 and created a very nice main menu just
    using buttons with a Jump to Slide option set for each. This allows
    me to create a topic menu to chunk my course into smaller, more
    manageable pieces. One thing, though, is that at the end of each
    topic, I have a RETURN TO MENU button on the slide for the user to
    click - or - he/she can just click the page forward button and go
    directly into the next topic w/o returning to the menu. This seems
    to work but there is not indication on the main menu that the topic
    has been completed (I used to do this in Authorware using
    scripting).

  • Why can't I enable an audio track for recording? (It won't let me)

    I want to record VO but PP won't let me...
    On Mac OS X 10.10 Yosemite in System Preferences:
    • Sound Input is set to C-Media USB Headphone Set (an Alesis usb mic...works fine for VO in Final Cut Pro 7)
    • Output is set to Headphone port
    In Premiere Pro CC Audio Hardware Preferences:
    • ASIO Hardware is set to "System Default Input/Output"
    • I have also tried "C-Media USB Headphone Set but this, too, doesn't work
    • With "System Default I/O" selected, Output Mapping is set to "Adobe Desktop Audio" (only choice), and shows:
         • "Built-in Output: Headphones 1
         • "Built-in Output: Headphones 2
         • "C-Media USB Headphone Set: Front Left
         • "C-Media USB Headphone Set: Front Right
    all four of these have a couple of square icons to the right.
    In order to record VO, I first need to "enable track for recording" in the Audio Track Mixer. There are no in or out points set in my timeline and the tracks are not locked or solo'd or anything. So why can't I select the audio track I want to use to record VO? I click it but there is no response. I just want to know why this software is not doing what it's designed to do.

    is I learn still around -? That was VERY HANDY!

  • Setting margins for "Create PDF from Clipboard"

    I'm posting this because I could not find another question that dealt with my problem directly, but after A LOT of searching, and a few failed attempts, I did find the solution.
    Problem: When creating a PDF from content copied to the clipboard from a webpage, everything on the page was way off-center, with almost no left margin.
    Once the PDF was created, since there is no easy way to adjust page margins, the only way to center everything would have been one page at a time (for 24 pages), by dragging the page contents manually to the center of the page. I tried using the "Set Page Boxes" function, but I ended up with 24 blank pages. Yes, I could export the PDF as a Word document, and then reprint that Word document as a PDF, but I knew there had to be a simpler way.
    Solution: When you create a PDF from a clipboard containing text (or in the case of the above document, text and images), Acrobat uses the settings for "Create PDF from Web Page."
    Unfortunately, if you look up Convert clipboard content to PDF in Acrobat Help, it doesn't tell you that. AND the settings for "Create PDF from Web Page" are NOT included in the list of settings under Preferences > Convert to PDF. There is an HTML option in that list, but there are no editable settings for that file type (There are actually quite a few such file types listed there, and my question is, if there are no editable settings, why are they even listed under Preferences?). Batch Conversion of Text Files also uses the same settings.
    So, here's how to do it:
    Select File > Create > PDF from Web Page
    Click on Settings
    To adjust the default margins for new PDF files created from a clipboard containing text, select the Page Layout tab, and adjust the margins to your liking. Notice how small the Default right and left margins are... hence my problem.
    Click on OK to save your new settings, and the simply Cancel out of the "Create PDF from Web Page" dialog box. If you read this page, it says you have to actually create at least one PDF file using the "Create PDF from Web Page" dialog in order for your settings to stick, but I never did, and my settings were saved just fine.
    If you're copying basic text (or converting text files), that's all there is to it.
    With web page content, there could still be a problem (as there was with this web page), if the content you've selected is not the full width of the web page. I think this has to do with the fact that web pages often use Content Style Sheets to format their page elements, and those styles are transferred when you copy that content to the clipboard. The PDF page margins are technically correct now, as you can see by the position of the image at the top of the page, but the text portion (at the bottom of the page) of the PDF only fills the same percentage of the text area (between the margins) as it did on the web page.
    The only solution I have found if this happens, is to export the PDF as a Word document, and adjust the margins there. In the document I was working with in these examples, there were boatloads of different invisible subsections to the document, and each subsection had different settings for right and left indent, fonts, font sizes, etc., so there was a lot more to it than a simple 'copy & paste' type of procedure. Once I corrected all the different elements (and this one had a whole lot of weirdness going on), and then printed it as a new PDF, everything looked much better.
    Hopefully this helps someone else find their answer much easier than I found mine
    And of course, comments and suggestions are welcome.

    Thanks for asking. Yes, with either the Crop tool or the Set Page Boxes tool, I could trim the page just fine, removing the excess from the right side, but as soon as I tried to add space to the left side, it just blanked out the whole page. It seemed like it should have worked, and maybe on a simple text file it would have. But that particular array of content proved to be most troublesome.
    I also could have just cropped the page down to 6.5 x 11, and then centered it when I printed it.
    My primary goal in searching for the answer, and my main reason for posting this, was for setting the margins for future documents (and to help others find those settings,too). Since I still had the web address, I could easily recreate the PDF once I figured out how to set the margins. Of course I didn't realize that there would still be problems once I got the settings right. Like I said, that particular web page seemed to have several unique difficulties.

  • I can't set shortcut for „Application windows"

    System Preferences → Exposé & Spaces → Exposé
    I can’t set shortcut for „Application windows” — first column with Fn key is OK, but the second column with mouse button doesn’t work. If I set „secondary mouse button” for „application windows”, it doesn’t work. But if I set „secondary mouse button” to „All windows”, it works! All mouse shortcuts for „All windows” or „Show desktop” work, but no mouse shortcut for „Application windows” work . The same with „Mouse button 3” and other buttons.
    Can you help me, please?

    Do you see the iTunes Library icon in the window? Click on it and the use the scroll bar to get to the tracks you want.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Edit muliple tracks  for genre artist etc?

    Does anyone know a way to edit the genre title etc of multiple tracks quickly?
    Doing it one at a time is extremely tedious particularly if the changes are to lists of up to 70 tracks.
    Thanks

    Just select all the tracks you want to modify and Get Info on them. iTunes will ask if you want to modify the settings on multiple tracks; accept and you can change the info all at the same time. Of course this will only work if you want to have the appropriate info for a given field be the same for all the tracks - for instance you want them all to be the same genre, or have the same album title, etc.

  • HT5824 cannot find my iphone and never had it set up for icloud can i still acceess or find it some how

    Hi trying to trck my lost iphone 5 i have lost it but not set up for find iphone.s there anyway i can still track it

    Not without physically looking for it.  There is no way to track it without iCloud and Find My iPhone.  You could always try calling your number to see if someone answers.

  • Cpio syntax in 10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems

    Oracle® Database Patch Set Notes
    10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems
    Download and Extract the Installation Software
    To download and extract the patch set installation software:
    1. Download the p3761843_10103_AIX64-5L.zip patch set installation archive to a directory that is not the Oracle home directory or under the Oracle home directory.
    2. Enter the following commands to unzip and extract the installation files:
    $ unzip p3761843_10103_AIX64-5L.zip
    $ cpio –idcv p3761843_10103_AIX64-5L.cpio
    Of course cpio -i is expecting a standard input, so there a missing <
    cpio –idcv < p3761843_10103_AIX64-5L.cpio
    Best Regards
    Laurent Schneider

    Hi Laurent,
    Apologies for the delay responding to your feedback.
    The Document to which you refer does not appear to be listed on the pages my group maintains at: http://www.oracle.com/technology/documentation/index.html
    We are not actually part of the OTN group.
    Therefore, please try the Members Feedback forum instead at: Community Feedback (No Product Questions)
    Thanks and regards,
    Les

  • Remove imsmanifest catalog tag text 'Adobe Captivate Course'

    Greetings,
    After I've using elearning suite 6's multi-scorm packager (would love for this to be a part of basic Cp6, nuther topic),
    I see that in the imsmanifest for the root folder (zipped) there is a <catalog> tag with the text 'Adobe Captivate Course'. Please see pic.
    I don't remember seeing an opportunity to edit out this text and replace with a more accurate description. Of course I can edit it out of the imsmanifest.xml file, but I'd rather see where this can be removed/edited up front.
    Can someone explain what I'm missing or why this is happening?
    Much Thanks,
    k

    Hi
    Can you please forward the file, or share it in a shared location, so that we can look into the issue?\
    Thanks,
    Mohana

  • How do I sort tracks for iPod using Lion using iTunes 10??

    How can I sort or modify tracks (for audiobooks) in iTunes 10.6.1 using OS 10.7.3 so they sync in the correct order for my iPod Touch? Either through iTunes or with 3rd party software is okay.

    First, set the Album field for every track to the book's title. It should be identical for every track in the book, to group the tracks together. The easiest way to do this is select all of the tracks, do a File > Get Info, and set the Album to the book's title. This ensures it's the same for every track.
    Here's an example of how I set the metadata on a group of audiobook tracks:
    The above shot assumes that the track names themselves currently have part number information. If they don't, don't unset the field that _does_ have that information (e.g., the first track number field).
    After that, tracks sort in this order:
    - Disc sequence number (xx of yy)
    - Track sequence number (aa of bb)
    - Name field
    I usually set the disc sequence numbers to be empty; set the track sequence numbers to be the right order, and change the Name field to _also_ be sortable, so something like "Book Title, part 1", etc. Use the File > Get Info command on each track individually:
    It's tedious, as you have to touch every track. Keep clicking that Next button! But once you've done it a couple times, and with clever use of copy/paste, it only takes a few minutes. I did this 40 track book last night in less than 5 minutes.

Maybe you are looking for