Setting up a new TC. Everything went fine. I was able to connect a macbook air, 2 ipads, an Iphone 6, and even a windows 7 PC. All devices showed a complete and functioning internet connection, but none of the devices could access the internet.
I am trying to set up internet connection to my home using a 3gig Airport time capsule as a router. I unplugged the cable from the existing router, and plugged it into the ethernet port of the TC. The TC fired up found tttttttthe internet connection, and glowed green. I set up the password, and all, and was then able to connect a Windows 7 PC, 2 ipads, and iphone 6, and a macbbook air, all running the most current os. All devices connect with the internet via the Airport device. they all say that there is a fully functioning internet connection, but none of them can actually connect to the internet. When I run a speed test via OKLA I am told that the test failed to innatiate.When I try to do a search I get an error message that the page cannot open because safari cannot make a secure connection to the server.
Any suggestions?
Inside the house I have what looks like a phone cable that is plugged into a power supply, and into a router.
What is this router?? Is it the TC or a router supplied by the ISP?
It will depend on how the system works.. but the instructions from skybeam are fairly simple.. you just setup a router with dhcp set on the WAN port for connection.
On the airport utility open your TC by clicking it then clicking edit.
Make sure the WAN is set correctly and the ISP ethernet cable is plugged into it.
And make sure Network is set to DHCP and NAT.
Please give me the screenshots of the same things from your setup.
Similar Messages
-
How to connect my MacBook air to my iphone?
I want to connect my MacBook Air to my iPhone (AT&T).
Unless you plan on setting up Personal Hotspot, you can't. File transfer by bluetooth is not supported.
-
Problem connecting my macbook air with my iPhone 5s
hi there
i know that this is a problem, but it has to bee a solution for it
i want to be able to transfer files and other things from my laptop to my phone
i can do it with pc and android but not with apple devices
for the money that i've paid for this 2 apple products.........not getting any back
they say that apple is the best, leading in technology.......right
help please
must be something to solve this problem
an update or something
thankssorry
the connection problem is bluetooth
thanks -
I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?
The following may help: Wi-Fi base station: Understanding and resolving a blinking amber status light
-
i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated why and how can i fix this i bought it for my daughter for x mas and that is tomorrow
AdaS_VZW,
I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
Shawn -
I am trying to set up two-factor authentication but none of my devices appear listed.
I am trying to set up two-factor authentication but none of my devices appear listed. I am only given an option to add an SMS-enabled device. When I do this, I receive an SMS with a code, but have no way to continue in the browser. I have enabled find my iPhone on at least one device, and can see all my devices in the find-my-iPhone app. Am I missing something?
As a check, this page walks you through the process:
http://technofyi.com/2013/03/21/how-to-enable-apples-two-step-verification-featu re/
His step 6 shows the 'Step 1 of 4' page where you should click 'Add an SMS-capable phone number'.
His step 7 shows the 'Add a phone number' window where you can enter the phone number and click 'Next'. The phone should then receive the code by SMS.
His step 8 shows the 'Verify Device' window which should appear automatically in which you can enter the code.
Are you not seeing the window in step 8? if this is not popping up automatically then something is going wrong: you could try clearing your browser's cache and trying again. If it still won't work you may have to contact Support: Go to https://getsupport.apple.com ; click 'See all products and services', then ' 'iTunes', and then 'iTunes Store', then 'Account Management' then 'Apple ID account security' - this seems to be the nearest relevant option. -
I have full bars but i can't connect to the internet. I've done all the usuall thing like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?
As with previous posts this is usually a DHCP issue and occurs frequently especially with routers connected to Cable Modems or those Micro-Cell towers.
Unplug all Routers, AirPorts (or other off brand Wi-Fi broadcast units) and any other Wireless broadcast unit that might provide you with a WDS (often other AirPorts feeding off the signal of the AirPort closest to Cable/DSL Modem) and best to totally power down the Unit affected; lastly either hold a reset button on Cable/DSL modem for 30-45 seconds or actually power it down if an option (not suppose to power down Cable Modems that have Telephony for some odd never completely explained to me reason).
Let Cable/DSL Modem re-boot till 'all green lights'. Then power up each device involved in order from closest to farthest waiting each time for completion of initiation. Micro-cell towers can take 10 minutes to completely re-boot and you must wait for across the board green lights in my experience. Even WDS can add a few minutes till all green on mother AirPort unit.
Only NOW may you re-start the offending device and see if it will connect. Works about 99% of the time! -
We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.
Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?
-
I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password
This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved. -
I purchased and downloaded some songs, everything went fine, but when I tried to play the song it only ran for 3 seconds even though it said the song was over 4 minutes????
Try download and install the latest iTunes 10.6.3 just reoleased yesterday and try out.
-
I have succesfully connected a MacBook Air, an iPad and two iPhones to the wireless network in this hotel. Apple TV can see the network and "connects" to the network, but w/o asking for password. I expected to see a screen immediately after selecting the network that asked me for the password as did all of my other devices. ATV did not ask me for a password. When I go to Settings>General>Network, it shows the name of the hotel wireless network, but I can't communicate with the network. It can't set date and time. When I try to enter my Apple account name and password, it tells me it can't log in w/o setting date and time.
Any ideas on how to connect to this network?I am having the same problem. In my hotel when I connect my laptop a screen will pop up and you have to hit the button "I Accept Terms". However I can't do that with the ATV. I called the internet provider and they said they could not help me. Any ideas? Do you think the guy just doesn't know what he can do for me? I am thinking I will call later and hope to get a different technician who might know how to help connect me.
-
I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks
Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden -
Our computer crashed that we mainly used iTunes on for upgrades, new purchases, etc. We've downloaded iTunes onto my laptop but none of my apps are in the library. We've made this laptop an authorized computer, but it's still not working. Why is this?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
One of my kids has an iphone 4, the other has an ipod. Bluetooth is ON for both, but they are not discovering each other. Are there any suggestions? (They bought a simple texting app so the ipod could text the iphone.) Thank you.
The built in BT profiles that iOS has do not include any kind of file sharing. Does the app say that it will text over BT? If so, then the connection would most likely be handled through the app itself. What is the name of this app?
-
I cannot connect my MacBook Air to a projector - It will not detect a 2nd monitor or display. I am using an Apple made Mini Display port to VGA adapter. As I read online I see that many other peple are having the same problem. Is this an Apple defect!!???? If so it just burst the bubble about how great macs are. I never had a problem with that on a PC. I hope I am wrong. What can you tell me?
Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.
Maybe you are looking for
-
500 Internal Server error while creating decision dialog type object
Hi All I am working on one CAF application and creating Create an Alternative Block Type. Inside this block I am creating decision dialog type object.When i reached at 4th step [Set Configuration] and editing [Decision Options]. After giving [Option
-
File content conversion scenario-empty file
Hi all, I am doing file content conversion for my sender flat file. And I want to generate XML file in my receiver location.When I check with test tab in my message map in IR , no structure gets generated in RESULT.Overalls cenario is working fine an
-
No signal from built-in input and MIDI crashing
Been trying to use GB to work out some rough ideas for a track. Idea was to drag and drop the stereo track into GB and then just plug the guitar straight into the computer using the 1/8" input. When I do that, no signal is getting to GB. I've checked
-
How to get the value from the list item when the user change the element? Thanks for help!! Eric null
-
Hi everybody, I had OBIEE 11.1.1.7 deployed on Weblogic 10.3.6. Later I added ODI 11.1.7 to the same domain. I created a new server (odi_server1) which host ODI related deployments (odi_agent and odi_console). Today I noticed odi_server1 also hosts a