Setting up abs [SOLVED]
I am attempting to follow the setup procedure for ABS from the wiki but have stumbled at pretty much the first step.
I used pacman to get abs and adjusted /etc/abs/abs.conf to
# /etc/abs/abs.conf
# the top-level directory of all your PKGBUILDs
[ "$ABSROOT" = "" ] && ABSROOT="/var/abs/"
# Supfiles to be parsed by abs (in this order)
# (prefix a module with a ! to disable it)
SUPFILES=(core extra !unstable community !testing)
but when I run
#abs
the system sits for a while before returning
==> Updating core...
Cannot connect to 1.0.0.0: Connection timed out
==> ERROR: An unknown error has occured. Exiting...
I have searched the forums for the error message and google but cannot see what is wrong.
I read through the wiki page and tried reinstalling wget and cvsup but still got the same error.
Can someone please point me in the right direction
Thanks
Last edited by alfie (2008-03-11 22:41:35)
Thanks for all your help, I have this solved now.
Just for info the problem was that the router has a buggy implementation of DNS in that if you use it for local network DNS then for certain applications (e.g. wget and apparently csup) it will insist on trying to resolve all addresses without using the external DNS that has been set.
This apparently only affects Linux, it works in Windows (see [url=http://www.dslreports.com/forum/remark,12484917]link[url])
The resolution - of sorts, was to add
66.211.213.17 cvs.archlinux.org
to my /etc/hosts file which enables it to be resolved correctly.
To help anyone searching the router is a DLink DSL-G604T although this bug also affects the G504T model
Interestingly, if I take the firewall off completely I have no access at all outside my local network but I think this is another topic more suited to a DLink forum.
Thanks again for all your help, you got me thinking in the right direction
edit: corrected code line
Last edited by alfie (2008-03-11 22:41:17)
Similar Messages
-
Messed up the pacman DB with wrong date set in bios [solved]
Solved by reinstallation and some searching around for a few hours.
Last edited by MoonSwan (2008-07-27 02:05:20)WonderWoofy wrote:I think you may find relevant information here. I ahve seem many of these threads in the forums lately. Are you dual booting w/ another operating system... in particular, one that uses localtime for the hardware clock (and there is only one that does this).
Thanks I'll look at that entry. Still I'd like to point out that this page clearly says that the timezone is to be set in rc.conf, which is a bit confusing. I must've followed this guide to get to my current configuration. I am dual booting with multiple other systems (xubuntu, win7, puppy, crunchbang) so from what I've read win7 might be the problem, but I haven't started it since i installed arch and my time has been off from the start.
Should I simply use NTP now that pacman is working again?
Thanks
Last edited by miek (2012-09-03 17:41:56) -
Linux 3.14.2-1 ARCH config error - will not build with ABS [SOLVED]
Hi Guys,
I need to compile my kernels with ABS because I need 16 DVB adaptors instead of 8. This works normally just fine. Today I tried to compile newest kernel and got following error during config. For the record 3.14.1-1 built just fine.
Makefile:615: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_x32.h
SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_32.h
SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_32_ia32.h
CHK include/config/kernel.release
SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_64_x32.h
UPD include/config/kernel.release
SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_64.h
WRAP arch/x86/include/generated/asm/clkdev.h
CHK include/generated/uapi/linux/version.h
UPD include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
UPD include/generated/utsrelease.h
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
HOSTCC arch/x86/tools/relocs_common.o
HOSTLD arch/x86/tools/relocs
CC kernel/bounds.s
gcc: error: unrecognized command line option ‘-fstack-protector-strong’
/home/server/core/linux/src/linux-3.14/./Kbuild:35: recipe for target 'kernel/bounds.s' failed
make[1]: *** [kernel/bounds.s] Error 1
Makefile:884: recipe for target 'prepare0' failed
make: *** [prepare0] Error 2
==> ERROR: A failure occurred in prepare().
Aborting...
Thanks for the help
Last edited by wdirksen (2014-05-02 20:31:32)wdirksen wrote:...I just moved to New Zealand...
Beautiful part of the the world... you just need to watch out for Saruman and his orc army
wdirksen wrote:... and the packages in the NZ mirror are not all in sync at the same time.
Use reflector....
% which upp
upp: aliased to reflector -c "United States" -a 1 -f 3 --sort rate --save /etc/pacman.d/mirrorlist && cat /etc/pacman.d/mirrorlist && sudo pacman -Syyu
You need to `chmod youruser:yourgroup /etc/pacman.conf` for that to work if run by non-root.
Last edited by graysky (2014-05-02 20:33:38) -
Can't set default browser [SOLVED]
Hi, I'm running GNOME-Shell (I wasn't sure if this belongs to testing forum or not), and I want Opera to be my default browser.
As for DE, I changed gconf-editor>desktop>gnome>url-handlers>http and https to "opera %s". Nothing happened.
As for Arch itself, i added "opera" here: https://wiki.archlinux.org/index.php/Ch … lt_browser
Nothing happened, my default is still Firefox. Any other solution?
Last edited by centos (2011-04-19 14:10:17)Well yes, but I wasn't sure if this was gnome-related
Thanks, this works. But I'd have sworn that I checked this menu before and Opera wasn't one of the choices.
Solved. -
The date and time setting go crazy[SOLVED]
Hello,
Each time, I boot up the time setting changes. Sometime two hours behind, sometimes five. Even if I set the time and date by using the "date -s" command or kde time setting feature when reboot the time changes.
Any idea how to fix this for good?
Thanks,
jmak
Last edited by jmak (2009-11-20 00:19:17)Thanks for all the suggestions.
This what happened. From some strange reasons the system clock setting and the distro setting were different. The bios clock was two hours before the distro clock. I adjusted the bios clock to real time—to correct time thinking this will set the disto time to the correct time too. Rebooted and I was put on the commandline with an error message:"superblock last mount time Thu Nov 19 11:41:29 2009, now=Thu Nov 19 10::53:27 2009 is in the future"
Then I entered the root password and did a "fsck" and rebooted. It booted up fine
but the distro time setting was still wrong. Rebooted again and checked the bios clock and it was reset to the distro clock. Both were wrong but at least have the same settings. Then I boot up again and set the time to the right setting in KDE. Rebooted and checked the bios clock which was adjusted to the distro setting—in other words to the correct settings. Now the time is ok. So it seems that the bios setting depends on the distro setting. I thought it was the other way around.
My computer is relatively new, 2 years old, so I dont think this was a battery problem. Also, I have other distros installed and I haven't experienced these kinds of problems with those distros.
Lately, I experimented with a few distros on different partitions, and what I am suspecting is that those might reset the bios clock which caused the inconsistencies in Kde.
jmak -
Feh Not setting background image[SOLVED]
I don't know what is going on but feh absolutely refuses to set the bg image on x starting up. I can set it manually just fine but it will not reset it on xstart. Here is my .xinitrc:
\#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
#exec xterm
exec openbox-session
eval 'cat ~/.fehbg' &
And ~/.fehbg has the command that I use to set the background, which works just fine if I execute the command after I am in x so I have no idea why it isn't working. Every resource I have looked at on the net says to simply add the "eval 'cat ~/.fehbg' &" line to .xinitrc after you set the background image with feh but I cannot for the life of me figure out what is going on. Thanks in advance.
Last edited by isolier (2008-01-11 08:55:41)I think you need to use `s instead of 's around your cat ~/.feghbg
Also, Archon is probably right, since you are exec'ing the openbox session and leaving it in the foreground, your command will never execute until openbox-session is done
Last edited by underpenguin (2008-01-11 08:16:06) -
Setting cursor theme [solved]
How do I manually set the cursor theme (either system wide or in fvwm config) ?
All of fvwm and gtk apps use the standard Xorg cursor, whereas kde applications use the default kde cursor, so it is a bit annoying that the cursor changes shape all the time.
Last edited by pressh (2007-11-14 20:56:33)What Ramses de Norre describes will change the cursor for your user only, you might, however, want to change it system-wide (that way whatever login manager you use will have the same cursor theme as your desktop, for example).
1. Make sure that the cursor theme you want to use is in /usr/share/icons
2. mkdir /usr/share/icons/default (if it doesn't exist)
3. inside that directory create a file called "index.theme" which has the following contents:
[icon theme]
Inherits=neutral
(change "neutral" to whatever the cursor theme you want to use is called) -
Basic help with setting up apache [SOLVED]
Hi,
I don't know if the problem is directory permissions or in configuring httpd.conf, but I would like to change the document root of my apache server to my (encrypted) home partition at /home/kilolima/www. However, after changing the document root in httpd.conf and adding user http (which apache runs under) to the users group (every file in my home directory is in the users group), I still get Access Forbidden errors. Is there a step I am missing here? I also thought I could add a symlink from /var/www to /home/kilolima/www and make that the document root but that doesn't seem to work either.
Oh, and is there something else I have to change in the config to get php working?
(I can't get the wiki to load at all, so if this is already spelled out there I apologize)
Cheers,
kilolima
Last edited by kilolima (2009-03-10 20:57:34)Take a look at this thread: http://bbs.archlinux.org/viewtopic.php?id=61583
You need to either make all directories along the path to the document root executable by other users (http) or you need to mount your root directory somewhere else. I would highly recommend using bindfs to do that as you can change the permissions of the files as they appear at the mount point (e.g. make them read-only even though they might be writable in their original location).
As for php, I'm not sure but I think you need to specify in which directories it's allowed to execute somewhere in the configuration file. I remember having seen something about a given set of default directories and anything outside of them requiring explicit permissions.
I hope this helps. -
My iPad cannot run after I'm delete the content from reset setting. how to solve this?
my iPad cannot run after I'm delete the content from reset setting. please help me!
Try rebooting. Press Sleep/Wake and Home button for 10secs or more till Apple logo appears.
-
Setting java classpath [SOLVED]
Hi everybody,
I am sure this is not hard, but I have been looking for some time now and just couldn't figure out how to do it. Trying to run simple java applications (I am just learning...) I allways get this error
Exception in thread "main" java.lang.NoClassDefFoundError: /opt/java/jre/bin/
Caused by: java.lang.ClassNotFoundException: .opt.java.jre.bin.
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
So after doing some research I am pretty sure this is because my classpath is not set, but I can't figure out the correct directory. I assumed this would be
/opt/java/bin
So I added these lines to my .basrc
export PATH=/opt/java/bin:$PATH
export JAVA_HOME="/opt/java/"
export CLASSPATH=.:/opt/java/
I think java is installed just fine, cause I can run eclipse without problems..
But it doesn't work... so please help me :)
Last edited by daJense (2009-05-25 14:10:49)First, Thx for replying.. so here is what I get using echo
[jens@jense-mobile Kap02]$ echo $PATH
/opt/java/bin:/opt/java/bin:/bin:/usr/bin:/sbin:/usr/sbin:/usr/share/eclipse:/opt/java/bin:/opt/java/jre/bin:/opt/kde/bin:/usr/share/netbeans/bin/:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/opt/qt/bin:/home/db2inst1/sqllib/bin:/home/db2inst1/sqllib/adm:/home/db2inst1/sqllib/misc:/home/db2inst1/sqllib/db2tss/bin
[jens@jense-mobile Kap02]$
Now for studying I try to run simple java apps from commandline. Using the -cp option I got my programm to work (it's "HelloWorld"). So if I set up a directory
~/javaapps/
How would I set this path so I don't have to use the -cp option every time I invoke an app -
Vim ignores statusline setting in vimrc [Solved]
Dear Archers,
I'm trying to modify my vim statusline. At this stage, my goal is to get vim to recognise any kind of statusline modification made in the vimrc, because at the moment no such modification appears to be recognised whatsoever.
I tried both a sample vimrc from the wiki and a blank vimrc containing nothing but the line,
set statusline=%t
For both vimrcs, the statusline setting was ignored. When I'm in vim, I can manually run the command,
:set statusline=%t
and the effect is apparent and immediate. All my other vimrc settings appear to be parsed in the correct manner; only this one specific setting seems to be ignored (but without warnings/errors).
I also did general googling on such topics as
Me Googling wrote:"vimrc" "ignores" "statusline"
and found this Stack Overflow thread which suggests using ruler instead of statusline, but still I couldn't get it to work.
If anyone can point out what I'm doing wrong, I would really appreciate it.
Last edited by /dev/zero (2012-05-31 22:15:49)JackH79 wrote:
Strange. Is vim at least using any other modifications in your vimrc?
If no, then I'd say that maybe it doesn't use the same vimrc you're working with.
If it does, then I'm out of ideas for the moment.
Edit: Maybe check this.
Thanks for your help. I noticed this problem while trying to modify my existing vimrc, which is much larger. That pre-existing vimrc works quite well, with or without these changes to the statusline settings. The changes just get ignored. This leads me to think that $HOME/.vimrc isn't being ignored entirely. For some reason, only the statusline part seems to be ignored.
The output of
:version
within vim appears identical to
vim --version
within bash, and so:
$ vim --version | grep vimrc
system vimrc file: "/etc/vimrc"
user vimrc file: "$HOME/.vimrc"
system gvimrc file: "/etc/gvimrc"
user gvimrc file: "$HOME/.gvimrc"
I could suppose that some error is making vim fall back on /etc/vimrc - but wouldn't this also make an error message appear, and make the colorscheme fall back to default as well? If there's a problem, then shouldn't the commands fail to work when I run them manually, and shouldn't a warning or error be issued?
I could post my normal vimrc, but I think at this stage it would just muddy the waters. I'd like to focus on getting the given minimal vimrc to work first. After that, I will see whether the solution works in a more realistic vimrc. -
Xmonad-darcs issue with pacman, yaourt and manually aur/abs [SOLVED]
Hello,
I'm having the craziest hard time trying to install xmonad-darcs. I can pacman -S xmonad xmonad-contrib fine, but when I copy some nice configs that I see a lot of modules cannot be found after starting x.
This is the error I am getting when trying to install from aur via abs:
$ makepkg -s
==> Determining latest darcs revision...
-> Version found: 20100418
==> Making package: xmonad-darcs 20100418-1 i686 (Sun Apr 18 23:09:26 EDT 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
==> Retrieving complete sources
darcs failed: Not a repository: http://code.haskell.org/xmonad (Failed to download URL http://code.haskell.org/xmonad/_darcs/inventory: Couldn't connect to server)
/home/woonasty/abs/xmonad-darcs/PKGBUILD: line 32: cd: /home/woonasty/abs/xmonad-darcs/src/xmonad: No such file or directory
<command line>:
Could not find module `Setup':
Use -v to see a list of the files searched for.
==> ERROR: Build Failed.
Aborting...
Is this package out of date because the repo dir is wrong?
vim PKGBUILD yields this:
1 # Contributor: adam vogt <vogt.adam<<at>>gmail.com>
2 # Package generated by cabal2arch 0.6
3 pkgname=xmonad-darcs
4 pkgrel=1
5 pkgver=20100418
6 pkgdesc="A tiling window manager"
7 url="http://hackage.haskell.org/cgi-bin/hackage-scripts/package/xmonad"
8 license=('custom:BSD3')
9 arch=('i686' 'x86_64')
10 conflicts=('xmonad')
11 depends=('gmp' 'libxinerama' 'ghc' 'haskell-x11>=1.5.0.0' 'haskell-mtl')
12 makedepends=('darcs')
13 options=('strip')
14 source=()
15 install=xmonad.install
16 md5sums=()
17 _darcstrunk="http://code.haskell.org"
18 _darcsmod="xmonad"
If someone can point me in the right direction I'd love to contribute and fix this package and re-upload, I am a new Arch user and would like to get more involved........right after I get xmonad working lol.
thank you in advance,
sleeepysleepy wrote:nvm , mod please close thread i guess the site was temp down.
Sure thing. -
Gtk setting question? [SOLVED]
Ive got this gtk theme i love but i do not love the background color that it uses for menus (drop-down pop-up like right-click menu or gnome main menu). does any one know where in the gtkrc file i can change the color for this ive looked over a little but if anyone one knows how to do this it will save me some time.
Last edited by generic_ (2009-04-17 22:36:35)did you install it in .themes folder or as a package?
if its a package then /usr/share/themes/<whatever theme you use>/gtkrc
that should do it, i suggest you move that folder to your home folder in .themes do that you dont have to edit the gtkrc as root or change permissions -
Build Fails for Alsaplayer in ABS
Hi all,
I couldn't get alsaplayer to run in GUI mode, but I found this thread that had the answer: http://bbs.archlinux.org/viewtopic.php?id=42168. So I followed the ABS wiki's directions for setting up ABS and I tried to run for alsaplayer (with the one line change in the PKGBUILD) , but the build fails after configuring. Here's the full console output:
aclocal.m4:14: error: this file was generated for autoconf 2.61.
You have another version of autoconf. If you want to use that,
you should regenerate the build system entirely.
aclocal.m4:14: the top level
autom4te: /usr/bin/m4 failed with exit status: 63
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for a BSD-compatible install... /bin/install -c
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether we are using the GNU C Library 2 or newer... yes
checking for ranlib... ranlib
checking for simple visibility declarations... yes
checking for inline... inline
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for size_t... yes
checking for stdint.h... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... yes
checking whether integer division by zero raises SIGFPE... yes
checking for inttypes.h... yes
checking for unsigned long long int... yes
checking for inttypes.h... (cached) yes
checking whether the inttypes.h PRIxNN macros are broken... no
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking whether imported symbols can be declared weak... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pthread_kill in -lpthread... yes
checking for pthread_rwlock_t... yes
checking for multithread API to use... posix
checking argz.h usability... yes
checking argz.h presence... yes
checking for argz.h... yes
checking for inttypes.h... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for unistd.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for getcwd... yes
checking for getegid... yes
checking for geteuid... yes
checking for getgid... yes
checking for getuid... yes
checking for mempcpy... yes
checking for munmap... yes
checking for stpcpy... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strtoul... yes
checking for tsearch... yes
checking for argz_count... yes
checking for argz_stringify... yes
checking for argz_next... yes
checking for __fsetlocking... yes
checking whether feof_unlocked is declared... yes
checking whether fgets_unlocked is declared... yes
checking for iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for NL_LOCALE_NAME macro... yes
checking for bison... bison
checking version of bison... 2.3, ok
checking for long long int... yes
checking for long double... yes
checking for wchar_t... yes
checking for wint_t... yes
checking for intmax_t... yes
checking whether printf() supports POSIX/XSI format strings... yes
checking whether we are using the GNU C Library 2.1 or newer... yes
checking for stdint.h... (cached) yes
checking for SIZE_MAX... yes
checking for stdint.h... (cached) yes
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for ptrdiff_t... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for asprintf... yes
checking for fwprintf... yes
checking for putenv... yes
checking for setenv... yes
checking for setlocale... yes
checking for snprintf... yes
checking for wcslen... yes
checking whether _snprintf is declared... no
checking whether _snwprintf is declared... no
checking whether getc_unlocked is declared... yes
checking for nl_langinfo and CODESET... yes
checking for LC_MESSAGES... yes
checking for CFPreferencesCopyAppValue... (cached) no
checking for CFLocaleCopyCurrent... (cached) no
checking whether included gettext is requested... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking whether ln -s works... yes
checking for a sed that does not truncate output... /bin/sed
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognize dependent libraries... pass_all
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... (cached) ranlib
checking for strip... strip
checking for correct ltmain.sh version... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether gcc and cc understand -c and -o together... yes
checking whether make sets $(MAKE)... (cached) yes
checking for libmikmod-config... /usr/bin/libmikmod-config
checking for libmikmod - version >= 3.1.7... yes, `/usr/bin/libmikmod-config --version`
checking for Ogg... yes
checking for Vorbis... yes
checking for audiofile-config... /usr/bin/audiofile-config
checking for Audio File Library - version >= 0.1.7... yes
checking for afOpenFile in -laudiofile... yes
checking for ANSI C header files... (cached) yes
*** Disabling OpenGL plugins per user request ***
checking for FLAC__stream_decoder_new in -lFLAC... yes
checking for FLAC__stream_decoder_init_ogg_stream in -lFLAC... yes
checking for mad_stream_init in -lmad... yes
checking for id3_file_open in -lid3tag... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for JACK... yes
checking for xosd_create in -lxosd... no
checking for GLIB2... yes
checking for GTK2... yes
checking for SNDFILE... yes
checking for pthread_create in -lpthread... yes
checking for ANSI C header files... (cached) yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking linux/cdrom.h usability... yes
checking linux/cdrom.h presence... yes
checking for linux/cdrom.h... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
checking sys/audioio.h usability... no
checking sys/audioio.h presence... no
checking for sys/audioio.h... no
checking audio/audiolib.h usability... no
checking audio/audiolib.h presence... no
checking for audio/audiolib.h... no
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking mad.h usability... yes
checking mad.h presence... yes
checking for mad.h... yes
checking id3tag.h usability... yes
checking id3tag.h presence... yes
checking for id3tag.h... yes
checking FLAC/stream_decoder.h usability... yes
checking FLAC/stream_decoder.h presence... yes
checking for FLAC/stream_decoder.h... yes
checking OggFLAC/stream_decoder.h usability... no
checking OggFLAC/stream_decoder.h presence... no
checking for OggFLAC/stream_decoder.h... no
checking for alsa version... found latest
checking for esd-config... /usr/bin/esd-config
checking for ESD - version >= 0.2.4... yes
checking for alOpenPort in -laudio... no
checking for AuStartFlow in -laudio... no
checking for doxygen... false
configure: WARNING: *** doxygen not found, docs will not be built
checking machine architecture... i686
checking for gcc optimization flags... -O2 -fexpensive-optimizations -funroll-loops -finline-functions -ffast-math -Wall
checking for an ANSI C-conforming const... yes
checking for size_t... (cached) yes
checking whether gcc needs -traditional... no
checking for working memcmp... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for madvise... yes
checking for strdup... (cached) yes
checking for strstr... yes
configure: creating ./config.status
config.status: creating intl/Makefile
config.status: creating po/Makefile.in
config.status: creating Makefile
config.status: creating alsaplayer.1
config.status: creating alsaplayer.pc
config.status: creating alsaplayer.spec
config.status: creating app/Makefile
config.status: creating interface/Makefile
config.status: creating interface/gtk2/Makefile
config.status: creating interface/gtk2/pixmaps/Makefile
config.status: creating interface/text/Makefile
config.status: creating interface/daemon/Makefile
config.status: creating interface/xosd/Makefile
config.status: creating scopes2/Makefile
config.status: creating scopes2/monoscope/Makefile
config.status: creating scopes2/levelmeter/Makefile
config.status: creating scopes2/spacescope/Makefile
config.status: creating scopes2/logbarfft/Makefile
config.status: creating scopes2/synaescope/Makefile
config.status: creating scopes2/blurscope/Makefile
config.status: creating scopes2/opengl_spectrum/Makefile
config.status: creating output/Makefile
config.status: creating output/alsa-0.5.x/Makefile
config.status: creating output/alsa-final/Makefile
config.status: creating output/jack/Makefile
config.status: creating output/oss/Makefile
config.status: creating output/esound/Makefile
config.status: creating output/sgi/Makefile
config.status: creating output/sparc/Makefile
config.status: creating output/null/Makefile
config.status: creating output/nas/Makefile
config.status: creating input/Makefile
config.status: creating input/mad/Makefile
config.status: creating input/cdda/Makefile
config.status: creating input/mikmod/Makefile
config.status: creating input/wav/Makefile
config.status: creating input/vorbis/Makefile
config.status: creating input/audiofile/Makefile
config.status: creating input/flac/Makefile
config.status: creating input/sndfile/Makefile
config.status: creating reader/Makefile
config.status: creating reader/file/Makefile
config.status: creating reader/http/Makefile
config.status: creating alsaplayer/Makefile
config.status: creating libalsaplayer/Makefile
config.status: creating extra/Makefile
config.status: creating examples/Makefile
config.status: creating m4/Makefile
config.status: creating docs/Makefile
config.status: creating docs/reference.doxygen
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
Configuration:
Install path: /usr
Use libmad shared library: yes
Enable libid3tag support: yes
Build GTK2 interface: yes
Build XOSD interface: no
Build OpenGL based visual plugins: no
Build alsa 0.5.x output plugin: no
Build alsa 0.9.x output plugin: yes
Build jack output plugin: yes
Build oss output plugin: yes
Build esound output plugin: yes
Build sparc output plugin: no
Build sgi output plugin: no
Build nas output plugin: no
Build vorbis input plugin: yes
Build cdda input plugin: yes
Build mikmod input plugin: yes
Build audiofile input plugin: yes
Build FLAC input plugin: yes
Included OggFLAC input plugin: yes
Separated OggFLAC input plugin: no
Build sndfile input plugin: yes
Now type 'make' to build AlsaPlayer.
make all-recursive
make[1]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80'
Making all in intl
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/intl'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/intl'
Making all in po
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/po'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/po'
Making all in interface
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface'
Making all in gtk2
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2'
Making all in pixmaps
make[4]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2/pixmaps'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2/pixmaps'
make[4]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2'
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/gtk2'
Making all in text
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/text'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/text'
Making all in daemon
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/daemon'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/daemon'
Making all in xosd
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/xosd'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface/xosd'
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface'
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/interface'
Making all in output
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output'
Making all in alsa-0.5.x
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/alsa-0.5.x'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/alsa-0.5.x'
Making all in alsa-final
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/alsa-final'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/alsa-final'
Making all in oss
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/oss'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/oss'
Making all in esound
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/esound'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/esound'
Making all in sgi
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/sgi'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/sgi'
Making all in sparc
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/sparc'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/sparc'
Making all in nas
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/nas'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/nas'
Making all in null
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/null'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/null'
Making all in jack
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/jack'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output/jack'
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output'
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/output'
Making all in input
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input'
Making all in cdda
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/cdda'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/cdda'
Making all in audiofile
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/audiofile'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/audiofile'
Making all in mikmod
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/mikmod'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/mikmod'
Making all in wav
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/wav'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/wav'
Making all in vorbis
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/vorbis'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/vorbis'
Making all in mad
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/mad'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/mad'
Making all in flac
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/flac'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/flac'
Making all in sndfile
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/sndfile'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input/sndfile'
make[3]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input'
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/input'
Making all in app
make[2]: Entering directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/app'
g++ -DHAVE_CONFIG_H -I. -I.. -I../alsaplayer -I../libalsaplayer -DLOCALEDIR=\"/usr/share/locale\" -D_REENTRANT -DADDON_DIR=\"/usr/lib/alsaplayer\" -O2 -fexpensive-optimizations -funroll-loops -finline-functions -ffast-math -Wall -march=i686 -mtune=generic -O2 -pipe -march=i686 -mtune=generic -O2 -pipe -MT alsaplayer-ControlSocket.o -MD -MP -MF .deps/alsaplayer-ControlSocket.Tpo -c -o alsaplayer-ControlSocket.o `test -f 'ControlSocket.cpp' || echo './'`ControlSocket.cpp
ControlSocket.cpp: In function 'void socket_looper(void*)':
ControlSocket.cpp:150: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:151: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:154: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:158: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:161: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:164: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:167: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:170: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:173: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:176: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:184: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:188: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:192: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:196: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:201: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:206: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:209: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:212: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:214: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:219: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:223: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:229: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:235: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:239: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:243: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:245: error: 'PATH_MAX' was not declared in this scope
ControlSocket.cpp:246: error: 'save_path' was not declared in this scope
ControlSocket.cpp:248: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:257: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:261: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:267: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:268: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:272: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:273: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:277: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:278: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:282: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:283: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:286: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:292: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:298: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:319: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:322: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:323: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:326: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:332: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:337: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:339: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:345: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:346: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:351: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:353: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:359: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:360: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:366: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:367: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:373: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:374: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:380: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:381: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:387: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:388: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:394: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:395: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:400: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:401: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:407: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:408: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:414: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:415: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:421: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:422: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:428: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:429: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:435: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:436: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:441: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:444: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:446: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:451: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:452: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:457: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:471: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:475: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:486: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:489: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:490: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:495: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:496: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:501: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:502: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:507: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:508: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:513: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:515: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:520: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:521: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:524: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:526: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:527: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:530: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:535: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:537: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:539: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:542: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:547: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:550: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:553: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:558: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:561: warning: deprecated conversion from string constant to 'char*'
ControlSocket.cpp:564: warning: deprecated conversion from string constant to 'char*'
make[2]: *** [alsaplayer-ControlSocket.o] Error 1
make[2]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80/app'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/zephyr/abs/alsaplayer/src/alsaplayer-0.99.80'
make: *** [all] Error 2
I figure it's those 2 errors in the middle of make that are holding it up, but I don't have a clue how to fix it.
thanks,
progrockIf you know how to write a patch or feel like learning, put one together, file a bug report, and submit the patch with it. If you don't feel like writing a patch, just submit a bug report that says that app/ContolSocket.cpp needs "include <climits>" to build. Either way is good.
Last edited by skottish (2008-08-08 04:03:17) -
Boot camp no longer on startup disk bless tool unable to set boot disk
iOS 10.6.8 boot camp no longer on startup disk msg says 'bless tool unable to set boot disk'
solved my own problem. a simple restart did the trick.
Maybe you are looking for
-
HT1923 iTunes Will NOT open , Error 7
I tried opening my iTunes after i had updated and i keep getting the same 'error 7' message. I tried to erase everything that had to do from iTunes and reinstalling it from scratch and still didn't work i'm not sure how i can fix this. I have a windo
-
Edit Column Width in Expanded View
I'm not too thrilled about the new iTunes, mostly because of the loss of easy navigation. My library is full mostly of classical music, and the track names are often very long [eg. "Couperin: Pièces de Clavecin, Onziême Ordre - Les Jongleurs, Sauteur
-
Replace specific string in a file while reading it
Hi, I am kind of an in between learner & intermediate programmer. I am trying to replace a specific string pattern in a file by reading it using BufferedReader & BufferedWriter. I tried it for 2 days. Can anyone give me a piece of code which reads a
-
Change Purchase Orders not to be send to external catalog vendors via XI
We are working on SRM 5.00 When ever we create Purchase Orders from External Catalog a mail goes to the vendor via XI in XML language. That is fine. However when we change any thing on the Purchase Order a again mail goes to vendor. Our requirement i
-
My ipod pause's number of times durning a song
When i play a song it starts to play than during the song all of the sudden with me not touching a thing, of the ipod it will pause's on me. I press the play button and it will play some more of the song than it will do it again. Plz help me