Settings for Youtube render?

I may lower the resolution but the other settings are what I have a question with.
I was doing some test renders earlier and ended up with audio artifacts/glitches, these settings seem to work but please correct any settings that are less than ideal.
Format:   MPEG2
Preset:    Custom
Codec:    MainConcept MPEG Video
Quality:    5
TV Standard:   NTSC
Frame Width:   1440 pixels
Frame Height:   1080
Frame Rate:      29.97
Display Format: Drop Frame
Use Maximum Render Quality:    Checked
Field Order: Upper
Pixel Aspect Ratio: Widescreen 16:9
Profile: Main
Level:    High
Render at Maximum depth:   Unchecked
Bitrate Encoding: VBR, 2 Pass
Minimum Bitrate:    4
Target Bitrate:     15
Maximum bitrate:   18.5
GOP Settings
M frames:     3
N frames: 15
Closed GOP every:      0
Automatic GOP placement:   UNchecked
Advanced Settings
Macroblock Quantization:   10
VBR Buffer Size:   112 x 2Kbytes
Noise Control:   Sensitivity
Write SDE:     Yes
Video Format:     NTSE
Horizontal:   1440
Vertical:     1080
Color Primaries:   ITU-R Rec. 709
Transfer Characteristics:   "   "
Matrix Coefficents:   "    "
Force VBV Delay: 0xfff
Intra DC Precision:   9 bits
Write Sequence End Code:   Yes
Embed SVCD User Blocks:   No
Ignore FrameInterval:   0
Use Maximum Render Quality:   Checked
Use Frame Blending:             Unchecked
Estimated File Size:   107 MB

Thanks Ann and Bill. I will have to learn from this one and make sure I don't make that mistake again.
The sound is ADR. Originally the voice was in camera but there was too much wind/ocean noise. Later, the voice was re-recorded indoors with same Canon HV20 camera but with an external $500 Sennheiser mic and a separate purchased ocean track was added.
I never listened to it with headphones. I also didn't notice that although the voice is:
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
with headphones I only hear it in one ear and, in Premiere, the track with the ADR voice recording shows 1 single soundwave(although it's in a stereo track) as opposed to the 2 soundwaves the purchased ocean wave track has.
I must have to change some setting on the camera or within Premiere because the voice should be heard in both ears.
Any thoughts, before I investigate, as to why the ADR with a external mic is "stereo" but heard in only one ear?

Similar Messages

Best PE7.0 export settings for Youtube HD, Vimeo or Smugmug?

Hi all,
I'm really new to video editing and I can't find any recommendations on the best Premiere Elements 7 export settings for Youtube HD, Vimeo or Smugmug. It seems like most of them want you to upload in 1280x720.
My original source is 1920x1080 30p AVCHD from a Canon HF100. Obviously, I would like to keep it at the same frame rate. There doesn't appear to be a preset in PE7 (or a way at all) to output 1280x720 30 into an MPEG container with H.264 encoding. When I go into the advanced properties of a preset like "H.264 1920x1080i 30" or "MPEG2 1920x1080i 30" and choose 1280x720, I no longer have an option for 29.97 fps - the only options are 23.976 or 24 fps. It seems bad to change this, right?
I see the preset for "HD 720p 30" which appears to be MPEG encoding of the video stream instead of H.264. This seemed to work OK, but I wasn't sure about it, because when I choose it I see in the description a line that says TV Standard: NTSC. A number of web sites indicate that H.264 is preferred, but I don't really understand why.
I also found a way to do H.264 in a Quicktime container. This seemed a little suboptimal because you can't do variable bitrate. When I unselected the "select bitrate" checkbox, it seemed like a quality of 50 yielded a .mov file with a bit rate of 2.87Mb/s, and a quality of 100 yielded a .mov file with a bit rate of 26Mb/s. It is confusing to me how the quality setting affects the bitrate on the quicktime containers.
I'm leaning towards using the "HD 720p 30" preset and working with the bit rate choices, but am open to comments. What do others think?
And on a related question - assuming we choose the "HD 720p 30" preset as a starting point, given the 1GB file restriction at Youtube, it seems to make sense to choose a bitrate that allows both good quality and reasonable file size. I don't know much about whether VBR 1 pass, 2 pass or CBR would be best for this kind of online HD video. Google is a little unhelpful here: http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=132461
This page (http://webvideotechniques.com/123/bigger-and-better-encoding-for-youtube-hd) seems to indicate aiming for a bitrate of 8Mbps with a minimum of 4Mbps, including 2 pass VBR.
So, basically, I'm confused and a little overwhelmed. I think I have solutions that work, but it's hard to tell. What does the greater community think? Thanks.

Thanks very much E Mann, that was a very helpful thread. I think it actually would apply for youtube as well. For other users, here's a direct link to the settings for Premiere Elements:
http://eugenia.gnomefiles.org/2007/12/08/exporting-with-adobe-premiere-in-720p/
Roughly, the answer is:
Quicktime container
Video codec: H.264
Quality: 80 (I used 100 and it just takes longer to encode)
Frame Rate: 29.97 (I guess if you are shooting in 24p, this might be different)
Bitrate: 5000 (I might try 8000)
Audio codec: AAC
Output channels: Stereo
Frequency: 48kHz
Now, my own personal changes to this recipe are:
Quality: 100 - takes longer to encode, no file size difference
Bitrate: 8000
Frequency: 44kHz (recommended by youtube)
One final note is that for Vimeo it appears you may have to try encoding in 29.97 or 23.97 and test to see which you like better. Apparently Vimeo caps fps at 24.
The nice thing about this is that you can get a quality video directly out of Premiere Elements and you don't have to pipe it through another program.

Compressor settings for YouTube for 720p 12 minute 10GB project created in FCPX?

Hey All
Would anyone care to share some settings for compressor please?
I have a 720p 50fps 12 minute 10GB file created in FCPX that using "Publish to YouTube" settings in Compressor is still coming out at 721MB.
It will take me 4-5 hours to upload this to YouTube so need to make the file smaller and who knows how it will play once its up online.
Any suggestions of some other Compressor settings without using too much quality?
Thanks

shippo,
When you reference "50 fps", do you happen to know if that's fields per second or frames per second? Depending on the answer to that, you may or may not need to adjust that.
When it comes to file size, you have frame rate, frame size, compression type and data transfer rate affecting the final size.
As Russ and darby have suggested, data transfer rate is the main thing to experiment with (since you're publishing for Vimeo, the other setting are pretty much locked in).
I have found that when it comes to playing with the bit rate, a video with a 1280 by 720 frame size needs between 4,000 kilobits per second and 5,000 kilobits per second to maintian good image quality. While you might get good results at a lower rate, high contrast areas in the picture are very, very, very likely to show loss of image quality.
If you need to get your video up asap, start the upload late at night. As long as your internet connection doesn't drop out (knock on wood), you file will be uploaded by the morning.
Also, (for what it's worth) is there any place close by that has fast internet that you could use? If you have access to a computer lab at a local community college, a 1GB file will probably upload in minutes rather than hours.
-Warren

Best HD export settings for YouTube

I am looking for some info on what export settings to use for YouTube with HD video. I want to export everything in 1080 (not 720) so I can also upload to Vimeo. Can someone please explain (or link) to me how I should export.
This is my first time using HD video, I shoot in 24fps onto HDV tapes.
I am not sure what else I need to know (or do) to export in the best quality.
THank you in advance!

Any other input for this topic?
I have been searching around for the past week for a solid export setting.
I've tried the above settings but I have yet to see the final product because it takes FOREVER to export (the estimated time just keeps going up and up, never down).
I found a setting a few weeks ago and used it but I cannot find it again. It did not take too long to export and the final product looked amazing both in Quicktime and on YouTube/Vimeo.
Anyone that would like to share their settings for an upload to YouTube/Vimeo, please do, I am in need.
Thanks!

FCE Export Settings for Youtube - SD and HD footage

I made a 7 minute video in FCE that combines photos and video shot in both SD and HD. I would like to upload this video to youtube, and I believe it needs to be exported to Quicktime movie first before I can upload it to youtube. I have researched this issue and tried many different export options, and the closest I have gotten still results in some black spots showing up during playback in quicktime. Can someone provide standard advice on the best settings for exporting from FCE in this situation?
I have FCE v. 4.0.1, QT v.7.6.9, and my movies were little movies shot from my Sony Cybershot camera and my Nikon D90 (some in SD and some in HD - by accident). Still pictures are included in the movie from both of these cameras as well.
Thank you for your help!

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

Best settings for YouTube CS3

YouTube wants us to use 1280x720 pixle ratio settings
can anyone tell me the correct settings and presets to use in Premier CS3
to creat the best video for YouTube
thanks
Here is what i used
Format: Mpeg2
Preset : NTSC DV high quality

or can someone tell me a better settings

HELP...DVD image file compression settings for youtube.

HELP...I am mounting a DVD Image from a file on the HD. I would like to compress to use on Youtube.
What are the best settings? I have a account with YT which allows for more than the 15minute standard. I will be uploading 2hrs worth at times
Can I batch compress several mounted images?
I'm using Compressor bu if it is easier I have Handbrake and Mpeg SteamClip.
Thanks
Bill
[email protected]

Compressor has a preset for youTube videos... Pick the one that closely matches your video:
Compressor YouTube settings has Frame Reorder set to on by default. YouTube doesn't like Frame Reorder, set it to off. Here are YouTube guidelines for Video set to them:
http://support.google.com/youtube/bin/static.py?hl=en&topic=1728570&guide=172858 5&page=guide.cs
Click the links to the left for more info about encoding videos.

Best Share Settings for YouTube

Hi, Could someone tell me what the best Imovie HD6 exporting settings are for uploading to YouTube? I'm trying to get the best quality image for my 8 minute video but still be able to upload under 100meg.
I've read on the YouTube site that MPEG-4 at 30fps & 640x480 is the best setting for the best quality results. But when I do that I still end up with a rather pixalated video. I've tried using the standard setting of Web Streaming (12fps, 320x240) but that's also rather pixalated.
Thanks for any thoughts.

Hi Steve
I don't often drop into Discussions these days as the resident experts are excellent but in the past I have had disappointing results with mpeg4 to YouTube until I used Matt's own QT setting settings.
I have and use Flash and on Sunday I tried encoding and uploading my YouTube with Flash. I used the suggested settings and it looked awful! Flash likes to encode from uncompressed footage and I have learned your footage has to be shot with Flash in mind. I then uploaded the same item using Matt's settings and it really looked passable. I could play them side by side. I am not a perfectionist and as long as my videos look OK I am happy.
Now YouTube is allowing a larger upload size I push the quality higher than Matt's and I keep the frame rate at exactly half. I use Pal so it is 12 but for NTSC it is 15. You can be pedantic and make it exactly half the NTSC frame rate which number escapes me at the moment as I never use it. This is best.
Remember to deinterlace but you know that.
So here they are - credit and thanks to Matt.
'I have found that if you are using "special effects" on your movies they do not reflect very well on you tube- If you make a clean movie with no effects than that comes out better. I use Imovie to Qtime export to my own settings for "movie" or .mov. the settings are:
Compression: H.264
Frame Rate: 12 fps(smaller file size)
Key Frame: AUTO
Quality: Medium ( again, smaller file size)
Encoding: Best Quality
Data Rate: AUTO
Size: 320x240
Sound ACC-48 khz( you can change this , BUT my Videos are mostly MUSIC- so this sounds better, If your is only the true sound of what you have recorded, like people talking etc- then you can change to lower settings, thus giving you a smaller file size)
I have found that the key to you tube is
1) if you use certain GEE THREE or any other effects, NOT ALL MIND YOU- that your movie will look crapy.
2) if you use higher settings than i have stated here you file will be large(hopefully under YOUTUBES 100 mb limit), BUT if your file is very large the movie will stutter, or stop during playback- and other viewers on YOUTUBE probably will move on to the next video of choice and thus all your hard work will go unseen.
So i use these settings keep the effects to a minimum and they seem to work fine-hope this helps any one,
matt
Lastly I do use effects sometimes so I make a clean copy of my iMovie, that is I export it to QT then I import it back into a new iMovie project so it is just one clip. This can fool YouTube. I made a YouTube using a slideshow from iPhoto
and I used random transitions expecting the worst and to my surprise it looked quite good.
If you want to look you can go see DIYTVMovies My Secret Garden
http://nz.youtube.com/watch?v=mQ_9Hhg-lRk
which is the director's commentary to show how I did it. Now again this is not Hollywood quality but for a beginner it is acceptable. I like the sound quality iMovie gives. The other version for my friends had sound edited on Final Cut which was compressed and not as good.
If anyone has better settings let me know.
Jane

Best Quicktime Conversion Settings for YouTube Posting

Hey there,
I'm using Final Cut HD with a Powermac G5 and osx 10.4.
I'm outputting a couple of sequences for youtube (not of my own volition!) - is there someone who can let me know what they think are the best output settings for posting to Youtube? The video is NTSC with soundtrack, and it should stream down regular dsl/cable.
Youtube says on the website to upload mpeg4 video as a recommended format, but in the menu system for FCPHD there is mpeg4 as a file format and as a video format? Which do they mean?
Any advice from youtube posters would be much appreciated, I know this is a generla question but I don't have that much time to research all the options in detail!
Many thanks to all!
Best
Richard, UK

http://www.kenstone.net/fcphomepage/youtube_compressorgary.html
Hope this helps. Not sure it's the most uptodate, but It's a start.

Premiere Pro CS3 HD Exporting Settings for YouTube??????

I am having trouble getting a crisp picure when I upload to Youtube, My picure quality looks great! when its exported but when I upload to YouTube its looks a lil pixelated when there is motion? www.youtube.com/gatorvision206 . Ive seen sooooooo many post saying do it this way..... do it that way.... What are the EXACT SETTINGS (Everything from FORMAT to BITRATE).
P.S.---------> filming in------> 1080p
Thanks
Gator.

Hello John,
I've seen all of that and some..... lol. That is why Im on Adobe forums now, cause I want to know the EXACT export Settings for a perfect quality 1080 HD picture.
thanks tho
GV

What are the best settings for Youtube videos using Camileo X200

What is the best video settings for the x200 for youtube videos. 720p-30/ 720p-60/ 1080p-30 .
Thanks

Hi
In my opinion the 720p-30 is good enough for Youtube.

Panasonic HDC-HS20 - Settings for YouTube

Hi! I have Final Cut Express, version 401B2. My computer is an iMac 3.06 GHz Intel Core Duo. Today I bought a Panasonic HDC-HS20 video camera. But I'm confused. What settings should I have in "easy setup" and when I export the video? The goal is to of course have the best quality possible. All videos I make are for YouTube.
So my questions are:
1. What settings should I have in "easy set up"? What format, rate and use?
2. What settings should I use when I export the video? What codec etc?

Yes I have PAL. First I need to choose the format.I can choose PAL, NTSC, HD, Apple Intermediate Codec and Panasonic DV/DVC PRO. I can also choose "all rates". But I'm guessing I should choose HD as the format.
If I choose 25 fps I can choose : AVCHD APPLE INTERMEDIATE CODEC 1920x1080i50.
If I choose 29,97 I can chose: AVCHD APPLE INTERMEDIATE CODEC 1920x1080i60
There are some more options under USE but it's either one of these two. the camera has the AVCHD technology and I think it is AVCHD APPLE INTERMEDIATE CODEC 1920x1080i50, not i60. I can also choose "all rates" which lets me choose any of the options.
I have in the camera chosen something called HA1920 which is the maxium picture quailty. So I'll try AVCHD APPLE INTERMEDIATE CODEC 1920x1080i50 as you said
Format: HD
RATE:25 fps
USE: AVCHD APPLE INTERMEDIATE CODEC 1920x1080i50
I'll try this and get back to you
Thanks for the help! I really do appreciate it very much!

Best Settings For YouTube and Vimeo

When my camera's footage is uploaded to Final Cut Pro 7 the settings show as:
Frame Size: HD (1440 x 1080) (16:9)
Compressor: Apple Intermediate Codec
When I send it to compressor I keep the settings the same, but when I try to upload to Youtube or Vimeo, the upload fails.
To fix this problem I've compressed everything within the settings that Youtube specifies:
H.264
1280x720 resolution
But the quality drops dramatically. I've noticed that some other videos on YouTube still maintain very high quality though and I'm wondering if I could do something differently or compress to different settings to get better quality.
Thanks for the help.

Funny Cakes wrote:
Sorry for all the questions, but where in the camera manual should I look to find info about the codec?
It shoots HDV.
Also not sure what you mean by AIC?
Shorthand for Apple Intermediate Codec.
When I first uploaded the footage I tried using final cut's "log and transfer" and also "log and capture," but couldn't get either to work.
Log & transfer will not ever work (for this camera's particular footage). Log & Transfer is aimed specifically at data-based cameras that record to memory and/or hard drives like Panasonic P2 cameras, RED, Canon DSLR's, etc. Not your camera which records to tape.
So, when you say Log and Capture didn't work, what do you mean? What happened? Nothing? Camera not recognized. Error messages?
Does this, other thread, help at all?

What is the best HD output settings for YouTube uploading?

Trying out iMovie '09 for the first time.
I shot a 2.5 minute video (AVCHD) and with
the video output settings I selected it is taking
about 20 minutes to encode.
That is way too much time...or is it?
Based on a YouTube video I watched on editing
in iMovie '09 I set my video and audio outputs as follows...
* Export using Quicktime
* File Format: MPP4
* Video Format: H.264
* Data Rate: 8192
* Image Size: 1920x1080HD
* Frame Rate: 60
Encoding: Faster Encode
Audio Data Rate: 256kbps
Encode Quality: Best
Now where can I improve encoding time without sacrificing
a huge amount of quality in my YouTube upload? I really want
the upload to look crisp HD on YouTube.
Thanks

For what it's worth, I used these settings earlier today in a test.
Share/Export Using QuickTime
Movie to MPEG4
Options:
h.264
10,000 kbits per second
1920x1080HD
Frame Rate 30
Keyframe: Automatic
Main Profile
Single Pass.
Here are the [results for 1920x1080|http://www.youtube.com/watch?v=tdBwUzWZf9M]
Other test results are in [this thread|http://discussions.apple.com/thread.jspa?threadID=2579263&tstart=0]
By the way, there is nothing magic about 10,000 kbps. If you used 16,000 kbps, it would be roughly the same data rate as Apple Intermediate Codec. But since YouTube does not penalize you for using a high data rate, as long as it fits their time limit, you can err on the side of high quality. The trick is to start high and then back off until you notice the quality dropping. In your case 8,000 may be fine.
My guess would be your frame rate is the issue. Most AVCHD camera shoot 30 frames per second (or 60 interlaced fields per second).
Message was edited by: AppleMan1958
Message was edited by: AppleMan1958

Best settings for YouTube video?

I've just finished editing my first video in iMovie and would like to export it to upload to YouTube. The YouTube site asks for MPEG4 at 320x240 pixels, 30fps, with MP3 audio. But what about all the other settings in the advanced export settings? Does anyone know what they should be for best results?
Thanks in advance.

This, from Karsten Schlülter (YouTuber):
I recommend in the expert settings:
mpeg4 as comprossor
in the options:
320x240 (youtube's "native" res)
30 fps (for fast action), 15 fps (to generate smaller files for longer movies)
the bitrate slider...- 500kB/sec is an excellent quality for such res (and generates laaarge files), but the conversion at youtube adds a lot of artfifacts...
:)Sue

Settings for Youtube render?

Similar Messages

Maybe you are looking for