Settings to BWOM_SETTINGS table in R/3 for deltas

Hi my requirment is to change a Parameter value in BWOM_SETTINGS table in R/3 for deltas..
I made the change in ore R/3 customizing client...but the setting is not updated in other clients
Please update me how to proceed
Thanks

Hi
Its not allowing me to change in the extraction client
Is this a client dependent table and do i need to ask basis to open the system for changes
Thanks

Similar Messages

Filtering Setup-Table and same filtering for Delta-Queue needed

Dear All,
I'm looking for the best solution to do the filtering for the delta-queue.
In program RMCVNEUA I'm filtering (excluding specific SalesOrg) data for the setup-table creation. I'm loading these data to the BW system.
BUT now my issue is, that with the delta-queue I'm getting also data for the SalesOrg I have excluded in the setup-table, as I have no filter for the delta-queue.
My Question: Where/How to filter by the same criteria the entries for the delta-queue?
Thanks for your support,
Peggy
some more details: Application 11; Queue-Name MCEX11; using 2LIS_11_VAHDR, 2LIS_11_VASTH, 2LIS_11_VAITM, 2LIS_11_V_SSL

Dear Arvind,
if there is no way in R/3 the solution must be in BW, but how exactly should that look like in the best/smartest way?
Let us look in detail at an Example:
DSO 0SD_O03 is getting data from 2LIS_11_VAHDR and 2LIS_11_VASTH.
1) For VAHDR I have the chance to delete not needed VKORG already in the InfoPackage, or load first to PSA and than filter in DTP or delete in Startroutine in Transformation.
2) BUT for VASTH, which has no VKORG information at all, I'm only able to delete the Dataset after it's loaded/activated in the DSO, as the rubbish-Dataset won't have any 0SALESORG. How to do that?
Thx,
Peggy

Keeping no of days less than 15 in field DELTIMESTof BWOM_SETTINGS table

Hello Experts,
Is it possible to keep no of days less than 15 in field DELTIMEST of BWOM_SETTINGS table so as to keep data in BWFI_AEDAT only for 2 days.
Also I tried but its not working,it still keeping data of last 15 days.
Regards,
Ankush Sharma

Hi Ankush,
DELTIMEST is the minimum retention period of time stamp tables.
As per SAP logic, the minimum retention period for entries in the time stamp table is 15 days. So if you decrease the parameter value less than 15, SAP will automatically take the minimum value as 15 and ignore the settings. That is why you are not able to delete the entries less than 15 days.
Ideally, when entries are deleted from table BWOM2_TIMEST, the corresponding entries for the changed line items are deleted simultaneously from log table BWFI_AEDAT, BWFI_AEDA2 and BWFI_AEDA3.
BWFI_AEDAT table contains list of changed documents with the change date and the document number which helps in the delta extraction. SAP has recommended DELTIMEST value to be >= 60.
Refer the below SAP note: (check BWOM_SETTINGS part in solution)
1012874 - FAQ extractors 0FI_AP_* 0FI_AR_* 0FI_GL_*(except 10)
Let me know if there are any questions.
Thanks
Amit

When I attempt to log on to I tunes I get the following message "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing This can happen as a result of installing other CD burning software Please reinstall

When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill Martin

I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

I have windows 7 and when i start up i tunes i get a message..."The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i

when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chris

Refer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

API or interface table to create releases for a blanket purchase agreement

Hi
I need to know if Oracle provides a standard API or interface table to create releases for a blanket purchase agreement.
I tried using the release_num field in PO_HEADERS_INTERFACE, PO_LINES_INTERFACE. But this is not working.
I'm able to create the blanket purchase agreement using the open interfaces, but not the releases.
Regards,
Alister

Hi Alister,
You can't create a release of a BPA through API, there is no such APIs provided by oracle.
Where as you can create a BPA by using API. You need to dump/poplulate data in PO_headers_interface & PO_Lines_intreface table.. Then use Purchasing Documents Open Interface API to create a BPA.
Regards,
S.P DASH

Table does not exist for the sys user

Hey Everyone,
I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
Thanks,
Sarang

Yeah i am using the query....
SELECT * FORM SCOTT.EMP
It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

What are the tables to be used for these reports

hello everybody,
i am a new user. it is only recently that i have started learning ABAP. i was given a rask by my faculty to develop the following reports. can anyone help me find out the tables that are used for them.
1. Report for Sales Orders due for delivery.
2. Revenue Reports based on Order Types.
3. Report for list of Pending Purchase Orders, Cancel Purchase orders.

Hi,
This depends on which fields you are supposed to show in output.Ask the person about layout requirement. How they want output of the report and which fields.
Normally Functional person will give table name also.
Here are few tables which can be useful in your requirement.
Sales Header table : VBAK
Sales Item table : VBAP
Delivery Header : LIKP
Delivery Item : LIPS
Purchase order header : EKKO
Purchase order item : EKPO
Better to concern this with u r requester and u ll get definite answer.
*MARK if this helps

How to find rows in F table of a cube for a given request ID

Can someone tell me how to find the rows in the F table of a cube for a given request id?

Hi,
Copy the Request ID number of that cube and go to manage of the cube and select contents tab, select Infocube content,
select list of objects to be displayed with results and in that screen give Request ID at Request ID row and at bottom Max no. of Hits keep blank and execute at the top.
this will display all the data rows loaded with that request. this is records from cube.
from Fact table, go to SE11, give /BIC/FXXXX "XXXX" is cube name for custom cube.
get the SID of that cube from the Cube contents as mentioned above, for field select for output along with Request ID select Request SID also.
from SE11 give table /BIC/DXXXXXP "XXXX" is cube name for custom cube. P for Packet Dimension. here pass reqest SID in 'SID_0REQUID' and get value for DIMID.
pass this DIMID into KEY_XXXXP, this give the fact table rows for that request DIM ID.
hope this helps
Regards
Daya Sagar

PL/SQL block to create temporary table + load via cursor for loop

Assume I have a table that contains a subset of data that I want to load into a temporary table within a cursor for-loop. Is it possible to have a single statement to create the table and load based on the results of the fetch?
I was thinking something like:
Declare CURSOR xyz is
CREATE TABLE temp_table as
select name, rank, serial number from
HR table where rank = 'CAPTAIN'
BEGIN
OPEN xyz
for name in xyz
LOOP
END LOOP
What I see wrong with this is that the table would be created multiple times which is why this syntax is not acceptable. I'd prefer not to have to define the temporary table then load in two sepearte SQL statements and am hoping a single statement can be used.
Thanks!

What is the goal here?
If you're just going to iterate over the rows that are returned in a cursor, a temporary table is unnecessary and only adds complexity. If you truly need a temporary table, you would declare it exactly once, at install time when you create all your other tables. You'd INSERT data into the temp table and the data would only be visible to the session that inserted it.
Justin

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

It shouldn't print each page as a separate job and
each tab has a different name, so, even if it did, it
ought to give the printouts the name of the tabs.
It doesn't print each page as a separate job unless the orientation is different - that's the bug. And the name of the job is taken from the name of the window, not the name of the tabs. That's how every application works, which, I think, is why Excel allows the specific selection or the active sheets to be printed.
Still, that does sound like a plausible explanation.
However, even if presented with multiple prints with
the same name, the spooler should print each one!
The spooler does print each one - you can watch the spooler process the multiple jobs. I think, though, that they are being overwritten since all the jobs have the name of the window as the job title. And since this happens after the Save Dialog is presented, there's really nothing the application can do. To Excel, it's one job, the multiple orientations don't matter; it's just that Apple doesn't handle it correctly.
As a workaround, you can print the selections one at a time and give them unique names and then rejoin them in one PDF file.

Different exchange rate in tables FMIOI and FMIFIIT for same purchase order

Hello,
I'm working in ECC 6 system with Former budget. My company code is in EUR currency.
I create a purchase order in 100 GBP and the exchange rate entered in the purchase order is 0,83 GBP for 1 EUR (100 GBP = 120,48 EUR).
When I create an invoice linked to the purchase order, the exchange rate is 0,85 GBP for 1 EUR (100 GBP = 117,65 EUR).
in the table FMIFIIT, the amount for the invoice is 117,65 EUR.
and in the table FMIOI, the amount for the reduction of the PO is 120,48 EUR.
Why is the reduction of the purchase order taking the exchange rate from the PO? and not from the exchange rate of the invoice?
Normally, the reduction of the PO should have the same amount as the invoice.
Could someone help me about this?
How can I do to correct the amount in EUR for the PO?
Thanks for your help.
Regards,
Chiachen

Hi,
Normally, the reduction of the PO should have the same amount as the invoice.
This is incorrect, please consult note 418914.
So, the situation you describe is normal behaviour, under assumption that your unit of measure is updated on value-based level.
Regards,
Eli

Place image in table cell in pages for iOS 5

Can I place an image into a table cell in pages for iphone? This would keep me from having to take my expensive MBA out on the dangerous (for the computer) jobsite. It would change my life to be able to do this on the iphone as my reports require it. As of yet I've found no way to do this.
Thanks in advance for your help!
~CR

Put the text cursor in the cell and use the regual Place command. The image will be placed as an inline graphic in the empty paragraph.

Table name in APO for demand planning

Hi gurus,
I want to upload Excel data (forecast demand) into APO SNP for the following fields
APO product
APO product Name
Demand Qty
Demand Date
Can you please tell me the suitable table name in APO for those fields?
Regards
Rajib Pathak

Hi,
APO Product - /SAPAPO/MATKEY
APO product name-/SAPAPO/MATKEY
Edited by: Sreenivasu on May 21, 2009 12:16 PM

All rows in table do not qualify for specified partition

SQL> Alter Table ABC
2 Exchange Partition P1 With Table XYZ;
Table altered.
SQL> Alter Table ABC
2 Exchange Partition P2 With Table XYZ;
Exchange Partition P2 With Table XYZ
ERROR at line 2:
ORA-14099: all rows in table do not qualify for specified partition
The exchange partition works correct for the first time. However if we try to exchange 2nd partition it gives the error.
How do i solve this error?
How do i find rows which are not qualified for the specified portion. is there a query to find out the same?

stephen.b.fernandes wrote:
Is there another way?First of all, exchange is physical operation. It is not possible to append exchanged data. So solution would be to create archive table as partitioned and use non-partitioned intermediate table for exchange:
SQL> create table FLX_TIME1
2 (
3 ACCOUNT_CODE VARCHAR2(50) not null,
4 POSTING_DATE DATE not null
5 ) partition by range(POSTING_DATE) INTERVAL(NUMTOYMINTERVAL(1, 'MONTH'))
6 ( partition day0 values less than (TO_DATE('01-12-2012', 'DD-MM-YYYY') ) )
7 /
Table created.
SQL> create index FLX_TIME1_N1 on FLX_TIME1 (POSTING_DATE)
2 /
Index created.
SQL> create table FLX_TIME1_ARCHIVE
2 (
3 ACCOUNT_CODE VARCHAR2(50) not null,
4 POSTING_DATE DATE not null
5 ) partition by range(POSTING_DATE) INTERVAL(NUMTOYMINTERVAL(1, 'MONTH'))
6 ( partition day0 values less than (TO_DATE('01-12-2012', 'DD-MM-YYYY') ) )
7 /
Table created.
SQL> create table FLX_TIME2
2 (
3 ACCOUNT_CODE VARCHAR2(50) not null,
4 POSTING_DATE DATE not null
5 )
6 /
Table created.
SQL> Declare
2 days Number;
3 Begin
4 FOR days IN 1..50
5 Loop
6 insert into FLX_TIME1 values (days,sysdate+days);
7 End Loop;
8 commit;
9 END;
10 /
PL/SQL procedure successfully completed.
SQL> set linesize 132
SQL> select partition_name,high_value from user_tab_partitions where table_name='FLX_TIME1';
PARTITION_NAME                 HIGH_VALUE
DAY0                           TO_DATE(' 2012-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')
SYS_P119                       TO_DATE(' 2013-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')
SYS_P120                       TO_DATE(' 2013-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')
Now we need to echange partition SYS_P119 to FLX_TIME2 and then echange FLX_TIME2 into FLX_TIME1_ARCHIVE:
To exchange it with FLX_TIME2:
SQL> truncate table FLX_TIME2;
Table truncated.
SQL> alter table FLX_TIME1 exchange partition SYS_P119 with table FLX_TIME2;
Table altered.To exchange FLX_TIME2 with FLX_TIME1_ARCHIVE we need to create corresponding partition in FLX_TIME1_ARCHIVE. To do than we use LOCK TABLE PARTITION FOR syntax supplying proper date value HIGH_VALUE - 1 (partition partitioning column is less than HIGH_VALUE so we subtract 1) and then use ALTER TABLE EXCHANGE PARTITION FOR syntax:
SQL> lock table FLX_TIME1_ARCHIVE
2    partition for(TO_DATE(' 2013-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') - 1)
3    in share mode;
Table(s) Locked.
SQL> alter table FLX_TIME1_ARCHIVE exchange partition
2    for(TO_DATE(' 2013-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') - 1)
3    with table FLX_TIME2;
Table altered.
SQL> Same way we exchange partition SYS_P120:
SQL> truncate table FLX_TIME2;
Table truncated.
SQL> alter table FLX_TIME1 exchange partition SYS_P120 with table FLX_TIME2;
Table altered.
SQL> lock table FLX_TIME1_ARCHIVE
2    partition for(TO_DATE(' 2013-01-02 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') - 1)
3    in share mode;
Table(s) Locked.
SQL> alter table FLX_TIME1_ARCHIVE exchange partition
2    for(TO_DATE(' 2013-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') - 1)
3    with table FLX_TIME2;
Table altered.
SQL> Now:
SQL> select count(*)
2    from FLX_TIME1 partition(day0)
3 /
COUNT(*)
         8
SQL> select count(*)
2    from FLX_TIME1 partition(sys_p119)
3 /
COUNT(*)
         0
SQL> select count(*)
2    from FLX_TIME1 partition(sys_p120)
3 /
COUNT(*)
         0
SQL> select partition_name from user_tab_partitions where table_name='FLX_TIME1_ARCHIVE';
PARTITION_NAME
DAY0
SYS_P121
SYS_P122
SQL> select count(*)
2    from FLX_TIME1_ARCHIVE partition(day0)
3 /
COUNT(*)
         0
SQL> select count(*)
2    from FLX_TIME1_ARCHIVE partition(sys_p121)
3 /
COUNT(*)
        31
SQL> select count(*)
2    from FLX_TIME1_ARCHIVE partition(sys_p122)
3 /
COUNT(*)
        11
SQL> SY.

Settings to BWOM_SETTINGS table in R/3 for deltas

Similar Messages

Maybe you are looking for