Setup "conflict domain" for posting

Hi
I would like to configure a "conflict domain" for the Oracle Financials Posting concurrent program.
We've setup Posting to run concurrently for each batch of SET_OF_BOOKS_ID/USER_JE_SOURCE rows inserted into the GL_INTERFACE table.
The two concurrent programs are GLPPOS and GLPAUTOP. The conflict resolution is defined as "global" between the two.
Mostly it runs fine, but occasionally a long-running GLPPOS holds up several GLPAUTOP requests as they are labelled as "Standby" when waiting.
There is however no reason for such a wait to occur since the data is different in each case.
I've read up on conflict domains using the following documentation.
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115sacg.zip
and realise that a "conflict domain" can be defined, which will enable changing the conflict resolution from "global" to "domain".
The question I have is how to go I about configuring a "Conflict domain" based on SOB ID and JE Source Name ?
Also, to which of the two concurrent programs should I associate the new "Conflict Domain", i.e. GLPPOS or GLPAUTOP?
Finally, is there a PL/SQL api available for configuring and associating "conflict domains"?
I'm also aware that the GL_DAILY_BALANCES/GL_JE_LINES and GL_BALANCES tables require partitioning, which would siginicantly improve the performance of GLPPOS, but would like to firstly focus on the conflict issue and then consider partitioning.
db = 10.2.04
ebs = 11.5.10.2
Much appreciate any help or ideas that could be offered.

Yes, I have looked at the document. I have gone into the Concurrent Conflict Domain form, but am unsure as to what to enter under "Domain", "Short Name" and "Description.
Say for example a posting against a Set of Books/JE Source is running (2,238), then another Posting (2,200) should be able to run concurrently.
What do I enter under the "Domain" and "Short Name" ?
I'm new to Oracle Apps, so all these terms and forms are a bit confusing at this stage!

Similar Messages

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
    The indicator AUFER from the delivery type contradicts the
    storage location constellation that was determined by the
    WM system.
    TVLK-AUFER = '<VAR2>'
    WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

Creating domain for BI Publisher issue

Hello,
Im trying to create domain for BI Publisher 11.1.1.3.0.
When configuring JDBC there are two component schemas: BIP Schema and OWSM MDS Schema. For database I have MS SQL Server configured with required RCU schemas.
The strange part: when testing the configuration, one fails - the BIP Schema. In the result log I see a very strange ""SELECT 1 FROM DUAL"" test which is obviously for oracle and not MS SQL.
For the 2nd schema, the one with successful test, there is a valid test query.
Please help me understand what am I doing wrong, why is there an Oracle test query for a MS SQL database and finally why on earth only one test fails because for both i have the same database type.
The version of fusion middleware is the one that came with BI installer 11g (11.1.1.3.0)
If wonder why am I doing this manually it is because the BI installer hangs at step 11 Creating Domain for about 100 minutes and then exits with timeout. great programming!
Please give me any hint, advise i can use to make BI Publisher run.
thank you

809239 wrote:
Hi Experts,
OBIEE 10.1.3.4.1.
I am able to login bi publisher though Administrator user. But am not able to login remaing users.
I am getting below error.
Oracle BI Publisher Enterprise
Reporting Login: Login failed: Please contact administrator for your username/password.
Error Details
Error Codes:
Please help above issue it is very urgent.
ThaksHi,
Refer to this post to make sure you have all the settings implemented correctly: ( http://onlineappsdba.com/index.php/2009/01/15/oracle-bi-publisher-admin-console-xmlpserver-login-issue-administratoradministrator/ ).
Also, check the log files to see if you can get more detailed error messages.
-Amith.

Any applicable\recommended Group Policy settings (Local & Domain) for configuring windows 8.1 "gold master image" for collection

Happy Friday everybody -
I'm working on implementing Microsoft RDS 2012\VDI for the folks here at work. I've read - online - a lot of articles on VDI and RDS 2012 - and have a working model that is working somewhat satisfactorily. I haven't seen much online about steps
I could take in Local Group Policy on my Windows 8.1 'gold image' - or for that matter Domain level group policy - that can assist in creating a better, more reliable/robust Windows 2012 VDI environment.
Anybody out there got any information or opinions or advice on Group Policy settings for VDI environments?
Thanks again, everyone!
Adrian
anr

Hi Adrian,
Thank you for posting in Windows Server Forum.
In regards to your issue you can refer beneath article for detail information.
1. Group Policy Best Practices for VDI Environments
2.Some Basic Group Policy Settings for VDI
Hope it helps!
Thanks.
Dharmesh Solanki

Pros and cons in setting AD domain trust into my AD domain for more than 10+ AD domain and some with same FQDN or label ?

Hi,
Can someone please share what is the pros and Cons of trusting AD domain for more than 10 different AD sites into my existing single domain forest let say ParentCompany.com ?
At the moment I only have one single forest AD domain with the Domain and Forest functionality Windows Server 2003. The main domain controller FSMO role holder is in the Data Center spread across three different VMs running on Windows Server 2008 R2.
The main/parent company has acquired smaller business chain of 15+ offices in which they have their own Domain Controller and also their own domain, sometimes they also got the same AD domain between them (no trust or whatsoever in those 15+ AD domain).
Sounds crazy but yes, there is no standardization in them or whoever manage their IT infrastructure previously.
I'm now considering what are the benefits of creating the AD domain and trust versus importing those AD objects into my domain and then decommission them.
No need to worry about Exchange Server since all of the user in those sites connecting to the RDS to my ParentCompany.com terminal servers.
My requirements or goal are as follows:
1. Simplify the AD domain structure & maintenance
2. Try to avoid the disruptions of the user in terms of downtime and selecting multiple different domain everytime they login to their PC or SharePoint sites.
any kind of help and suggestion would be greatly appreciated.
Thanks.
/* Server Support Specialist */

Can someone please share what is the pros and Cons of trusting AD domain for more than 10 different
AD sites into my existing single domain forest let say ParentCompany.com ?
I think you mean 10 AD domains.
Managing multiple domains can be difficult for administration. I usually recommend using a single domain in a single forest with OUs to separate resources whenever it is possible.
However, if you can't do that then you can simply create trust relationships between your domains. The advantage is that you can enable access to resources to different domains. I do not see cons here.
The main/parent company has acquired smaller business chain of 15+ offices in which they have
their own Domain Controller and also their own domain, sometimes they also got the same AD domain between them (no trust or whatsoever in those 15+ AD domain). Sounds crazy but yes, there is no standardization in them or whoever manage their IT infrastructure
previously.
I'm now considering what are the benefits of creating the AD domain and trust versus importing those
AD objects into my domain and then decommission them.
I would recommend consolidating your domains into a single one. ADMT is a migration tool that you can use. The advantage would be the ease of administration. Also, by having multiple DCs for the same domain across sites, you will take benefit of High Availability
of your and DRP.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Critical errors were found in setup. Please see setup log file for details.

What fixes this problem in IE? I have read a lot of forums with many replies saying they got by it, but they never explain how. One guy posted a link, but the link is dead now.
I need to know how to fix this problem. Only thing I can gather is its a Java issue, but my java is up to date. In fact I just reinstalled it make sure that it was updated.
With as many people having this issue I can't believe I have not found something from Adobe on this issue.
Regards,
Scott

I run the setup file and it does the checking system process... then goes into the actual install menu and not more than 10 seconds into that 2nd menu I get "critical errors were found in setup. Please see setup log file for details". That is all I can get out of the install.
The message window that I get the error in indicates windows Internet Explorer.
That is the my entire process. I have searched and found the log file and I have looked through it, but I am having a hard time finding the actual cause of the error. Out of shear frustration I removed all my adobe products and tried the install again and had the same exact problem. So I know there is something stopping me some where... just don't know what it could be.
Thanks,
Scott =

Installing second domain for forms testing environment?

Hi!
I've a physical windows server for running my forms applications (11.1). On installing fusion middleware suite I created a domain with the assistant. Further more another assistent configured my forms server into this domain.
The problem is that I've no forms testing environment. So the idea was to create another domain for testing and setup a second forms server in this new testing domain. The pysical machine has enough power to server both domains.
Is this a supported configuration and can it be done with the assistants?
Thanks
Markus

I wouldn't say that the additional administration effort is much or bad. I also don't agree 100% that the dev instance don't influence the prod instance when both are hosted on the same server.
When hosting both instances on one server and one oracle home you will always be on the same patchset on the OS and Oracle side.
Consider you are encountering a bug in forms when developing a new feature which is fixed in a one-off patch. To test this one-off patch in dev you most certainly will have to take down the production instance too as both of them will access the same Oracle Home and Middleware Home. Same thing is for OS patches. If you are seperating dev and prod instances on different machines you have the possibility to test your configurations proper on your test machine without influencing production.
This will guarantee you that you have always a tested environment in production.
Think about scalability: developers tend to make boo-boos while developing new things. One forms session <can> take down a whole machine (I have seen that and I have done that - on a development machine). If this happens on a development machine you have 10 angry developers which can be calmed down with a sixpack beer; 100+ people plus the managment which should be working with the software you developed are not tranquilized so easy when they cannot work for 20 minutes because of a infinite loop in development ;).
I agree that you might have additional license costs; but if memory serves Oracle VM and Oracle Enterprise Linux have no additional license costs which breaks down the costs to OFMW 11g. And I am not too sure if you have to pay (the full price) for development instances (I am a developer, not a sales person). But this is best discussed with your oracle sales representative.
Again, this is just my opinion; maybe someone else can give you more input.
cheers

Derived Flow block for posting in Product Type 55A

Dear SAP Gurus,
Kindly request your input issues that I have.
Currently I'm maintaining a derived flow type on Product Type 55A (Interest Rate Instrument) and Product Type 56B (Syndicated Facility).
The derived flow were used to generate withholding tax flow type. The source flow is maintain manually as Other Flows.
The derived flow for both Product Type 55A and Product Type 56B were successfully generate. But on Product Type 55A the derived flow were block for posting, the reason is because the 'Previous Flow does not permit for posting'.
What confused me why this block is not happening on Product Type 56B, while I use the same flow type and how to UNBLOCK the flow type so its open for posting again.
Thanks for the input before.
Cheers,
Tedi

Hi,
In the configuration setup check your flowtype and see whether Calc with Capital Reduction checked. I believe by default SAP has this checked; uncheck it. When this option is checked, it doesn't allow you to make any modifications to the contract if a posting has already occurred. e.g. increasing or decreasing the nominal amount of the contract.
Hope that helps.
-Anya

Cannot create domain for ODI

Hi,
I am trying to create a domain for ODI console and am trying to follow the instructions in the below post:
http://odiexperts.com/tag/oracle-data-integrator-11g
However, when I start the WLS config wizard the second screen does not come up with the option for ODI, etc.
Can someone guide me what I should be doing to see the options?
I only see two options apart from the base, for Select Domain Source, namely, Weblogic Advanced Web services for JAX-RPC Ext and for JAX-WS.
Does it have anything to do with where the Middleware Home has been installed? Because my Middleware home is located on D:\Oracle\Middleware and ODI is installed on
D:\app\oracle\product\11.1.1\Oracle_ODI_1
I am fairly new to Oracle/ODI and absolutely a novice in terms of WLS.
Any/all help is highly appreciated.
Manish

Thanks Dev.
I reinstalled ODI in the middleware home and now I was able to see all the options.
I then faced another issue when creating the domain:
Domain Location: D:\Oracle\Middleware\user_projects\domains\base_domain
Reason: null
Exception:
Traceback (innermost last):
File "<iostream>", line 17, in ?
TypeError: unsupported operand type(s) for +: 'NoneType' and 'str'
And then I saw another post and then started the domain creation from the below location and was successful in creating the domain.
D:\Oracle\Middleware\Oracle_ODI1\common\bin\config.cmd
Thanks to all the knowledge sharers.
I am letting this know so that others can also benefit and get on.
Manish
Edited by: manishd_2000 on Jan 18, 2011 11:22 AM

Ktpass: failed getting target domain for specified user

Hi all,
I am trying to generate keytab file by following document
http://docs.oracle.com/cd/E17904_01/doc.1111/e15740/wna.htm#REGADWNA
relevant section 7.3.2.
Environment we are using as follows:
Microsoft windows server 2008
Command executed :
ktpass /princ [email protected] /mapuser [email protected] /pass Micro123 /out c:\poc.keytab
Here NTDS (AD windows service name)
MSCAD.AE (AD domain name)
[email protected] (AD user)
Micro123 (Password)
c:\poc.keytab (file location)
while executing display error as response:
C:\>ktpass /princ [email protected] /mapuser [email protected] /pass Micro123 /out c:\poc.keytab
Cannot bind to default domain: 0x54b
ktpass:failed getting target domain for specified user.
Your assistance in this regard would be highly desirable.
Regards,
Syed Waqar

I don't think you have your principal name defined correctly.
It should be in the following format:
host/[email protected]
http://technet.microsoft.com/en-us/library/cc753771.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Excessive name conflicts (451) for Bonjour in event logs

I have a few hundred PC laptops using iTunes, Bonjour, and AirPlay. Teachers are using iPads and AirPlay to project to pc Laptop and projector. The AirPlay works most of the time and stays active on the pc, but cannot be found by iPads after it is idle for a while. I am getting many errors indicating Excessive Name Conflicts (451) in the event logs. The exact message on one laptop is:
Excessive name conflicts (451) for HS2105._airplay._tcp.local. (SRV); rate limiting in effect
HS2105 is the workstation name. The laptop and iPad are on the same VLAN and multicasting is enabled on WAPs. I think Bonjour is the problem. Any ideas?

I'm seeing multiple errors from Bonjour, also, on both my Win 7 and XP laptops.
They are different from the ones you posted:
492: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
The number in front cycles through different values: 520,576, 240, 536, 236, 560, 492, 516, 568. Always a burst of ten of them with different numbers.

How to send Emails to Other Domain for the users in My AD

Hi All,
I have a Domain test.com and in this i created 10 users and now i in the properties of their account i added mail address as ****.dummy.com (which is not my domain which i have created separately and there is no relation between these two) No will the mails
will be deliverd to those users??
Thanks

Is this "other domain" you are talking about just an SMTP domain, or a Windows domain? If the former, and there is a messaging system they can receive with, you can just send (though you may need a send connector). If the latter,
is it in the same Windows forest? If so, you need to prepare the domain for Exchange (using Setup /PrepareDomain). You can then add that domain to your Accepted Domain list (in the Organization configuration, Hub Transport role) and create
mailboxes for these users. Once the have mailboxes, they will receive email. Until all of this happens, they won't be able to get mail.

Preparing Domain for Exchange 2013 in an Exchange 2010 Organization

When preparing the domain for Exchange 2013, can we use the same Organizational Name as was used for Exchange 2010 or should we select a new variation?

When preparing the domain for Exchange 2013, can we use the same Organizational Name as was used for Exchange 2010 or should we select a new variation?
You dont have define the org name since it already exists.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

There is a conflicting setting for recovery options (Removeable Device)

Greetings All,
We are so close to having MBAM fully working. In what I hope to be the last post on MBAM issues, I am working to resolve an issue with removable devices and enforced encryption. As it stands the OS drive is fully encrypting automatically as it
should without issue, and the system is reporting back to MABM correctly. When it comes to removable devices, the answer is a little different. You insert a USB thumb drive and Windows 7 correctly makes the device read-only and offers to encrypt
it for you to allow full access. But if tell it to perform the encryption, you get the following error.
There are conflicting settings for recovery options. When a recovery password is required, backup to active directory should be turned on or the user should be required to save the recovery password.
As it stands, I do not have backup into AD turned on as I want info backed up to MBAM. But in testing I did turn on the option to have it backup to AD for remove devices only and had the same result.
I am also including a link (to large to put in post) to a copy of my GPO for MBAM (properly sanitized) for review and would appreciate any thoughts or insight.
MBAM GPO Settings

When you makes changes to the MBAM policies, it will automatically makes changes to the equivalent bitlocker policies (In-built). I am guessing that the MBAM policy settings which you have defined for Removable drives has not been reflected to the bitlocker
policies.
As in the GPO, you can see if you have made changes to settings of the OS Drives (Windows Components/MDOP MBAM (BitLocker Management)/Operating System), it has made
equivalent changes to bitlocker policies (Windows Components/BitLocker Drive Encryption/Operating System Drive). Same
should happen for the removable drives also.
I would rather suggest to delete the MBAM GPO settings for the removable drives and then again define the settings and look for the changes in the bitlocker policies.
Let us know the result.
Also you don't have to define this particular GPO settings:
Require additional authentication at startup (Windows Server
2008 and Windows
Vista)
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps =======

Personal Domain for two sites on Family Pack

Can you use two personal domains with iWeb if you are using a Family Pack/.mac?
I have a single .mac now for family and would like to upgrade to family pack and have a small portion for an upcoming home business with its own personal doman.
TIA

I think you want something setup like I have right now - and it works. I have two sites on .mac using iWeb. The first main site is designated with a personal domain. The second has one, but I cannot use it because the whole .mac preference is for all the sites. So I went to my host name provider (domainit.com) and they offer one free "forward" for that personal domain - all I did was type in the site name where it should point to. Now, it wasnt the standard "web.mac.com" because my .mac is designated with a personal domain. For that second site it is mypersonaldomain.com/site. When I enter my domain for that second site, it says the namein the browser bar, but at the bottom of the browser you can see the original full path of mypersonaldomain.com/site.
So, you dont need to have another web host (web space/storage). You can have a primary personal domain working with .mac and then have the second personal domain point to (forward) the second site (that now is a sub of the first personal domain).
Now that I talked in circles, HTH just a bit.

Setup "conflict domain" for posting

Similar Messages

Maybe you are looking for