Setup File / Configuration File Question

I was hoping to get some insight as to which is the recommended way of using setup files for stuff like data paths and other general parameters that the user can set like fonts and colors when they are running a compiled app (a labview app built as an exe).
CSV files  - open them, read them, parse them
INI Files - Use LabView native functions to read and write section parameters
XML - Not sure how much native support there is for XML.  I have seen a few example that seem to be using MSXML parser as an activeX control then sending VB code to edit the XML file.
Any insights would be appreciated.
Thanks
Tim C.
1:30 Seconds ARRRGHHH!!!! I want my popcorn NOW! Isn't there anything faster than a microwave!

My favorite method is one you did not mention - HDF5.  Its advantages
binary
fast
arbitrarily complex hierarchy (internal architecture is a directed graph)
flexible API
native compression, if you need huge data sets (think function generator)
not well known, so most people will not modify it, even though it is easy to do so
supported on almost all platforms LV is (have not tried to compile on RT yet)
Its disadvantages
very steep learning curve
need a DLL/shared library
not multi-thread safe on windows (by default, the option now exists)
poor LabVIEW support
HDF5 is actually designed as a complete data storage mechanism.  Using it on an INI file is often like swatting a fly with a sledge hammer.  However, I prefer to have the power when I need it, rather than having to rewrite my code and have backwards compatibility issues.
If you are interested, you can get more information at the HDF5 website.  NI makes a primitive API available here.  If you have LV8.2 or higher, it may be easier to create your own using the shared library wizard.  Others in the community are also working on APIs.
All things considered, however, the INI file is probably the easiest way to go.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Similar Messages

  • "Template import error: No VM configure file found" on brand new setup

    Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
    The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
    Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
    Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
    [2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
    [2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
    [2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
    [2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
    [2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
    [2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
    [2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
    [2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
    [2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
    [2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
    [2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
    [2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
    [2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
    [2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
    [2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
    [2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
    [2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
    Traceback (most recent call last):
    File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
    return func(*args)
    File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
    raise RuntimeError('Template import error: %s' % err)
    RuntimeError: Template import error: No VM configure file found.
    [2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
    [2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
    [2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
    [2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
    [2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
    [2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
    [2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
    [2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
    [2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
    [2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

    How did you get the template to where you staged it?
    I'd say the template is corrupt or you only have a partial template.
    I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

  • Date display setup - is there configuration file option for this?

    I have just installed SQL Developer and am loving it BUT since I am a long time SQL*Navigator user, one thing floored me.
    In SQL*Navigator, there is preference you can set that will display all dates in the format you want, I don't see that option here in SQL*Developer. It is defaulting to yy-mm-dd. I understand I can alter my session or use a to_char function to get the date in the format I want, but isn't there a configuration file somewhere or preference I can set to the date/time format I would like to display each time I use SQL*Developer???????

    Oracok, there is no way to do this in SQL Developer according to the oracle.com website:
    http://www.oracle.com/technology/products/database/sql_developer/howtos/howto_policy_date_formats.html
    As for wanting to be able to do this - Seconded. I would love it if there was an equivalent to the SQL*Plus glogin.sql that could be run every time SQL Developer opened.
    -Natalka
    http://toolkit.rdbms-insight.com

  • O2cb_ctl : unable to load cluster configuration file while  RAC setup.

    OCFS2: unable to load cluster configuration file
    Hi,
    I installed OCFS2 successfully.
    I successfully install 3 RPMs.
    I am getting error while running ocfs2console to do cluster configuration.
    I tried to run this manully using "o2cb_ctl -C -n NODENAME -t node -a number=NODENUM -a ip_address=IPADDR -a ip_port=IPPORT -a cluster=CLUSTERNAME "
    this commnd. but getting error as
    "o2cb_ctl: Unable to access cluster service while creating node Could not add node "
    Then I edited this file manually and copied to another nodes using SCP. Then tried to use o2cg_ctl utility as
    # /etc/init.d/o2cb offline ocfs2
    # /etc/init.d/o2cb unload
    # /etc/init.d/o2cb configure
    Configuring the O2CB driver.
    Next, I configure /etc/ocfs2/cluster.conf:
    cluster:
    node_count = 2
    name = oracle
    node:
    ip_port = 7777
    ip_address = 140.187.222.222
    number = 1
    name = ocvmrh2053
    cluster = oracle
    node:
    ip_port = 7777
    ip_address = 140.187.222.222
    number = 2
    name = ocvmrh2051
    cluster = oracle
    Next, I try to load ocfs2 modules by command: o2cb load - everything messages is OK
    And I try switch ocfs2 cluster to online (by o2cb online oracle), write this error message:
    Starting cluster oracle: Failed
    o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
    Stopping cluster oracle: Failed
    o2cb_ctl: Unable to load cluster configuration file "/etc/ocfs2/cluster.conf"
    I think both errors i get are due to same issue. Please kindly reply if anyone having idea.
    Thanks.
    Please anyone can help me to resolve this.
    Message was edited by:
    user596035

    provide output of this command from all OCFS2 nodes:
    ls -l /etc/ocfs2/cluster.conf
    Regards,
    Martin

  • No dsn is present in the configuration file in the reporting services 2008

    HI i have found this error in the log file of my reporting services ,
    when i comes to the Configuration file in that
    my DSN path is empty no input code is there in that DSN tags
    <DSN>
    <DSN/>
    it shows the empty tags,
    and my Current Report Server Report Credentials are Windows,Service account credentails
    will it take the problem or what
    We have repair the BIDS setup also still not able to solve my issue.
    once this is  resolved now able to send the emails using subscriptions.
    pls infom abut this , i have sufferd this problem last 20 days.
    Please update the above query with high priority
    TanQ

    Hi Ychinnari,
    According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
    DSN specify the database server that hosts the report server database connection string.  The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
    existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
    Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
    On the Database page, click Change Database.
    We can create a new report server database or select an existing database, then click Next.
    Connect to the instance of the Database Engine that you will use to create and host the report server database.
    Specify properties used to create the database.
    Specify the credentials used by the report server to connect to the report server database.
    Review the information on the Summary page to verify the settings are correct, and then click Next.
    Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
    For detail information about Configure a Report Server Database Connection, please refer to the following document:
    https://msdn.microsoft.com/en-us/library/ms159133.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • An OS-Intergrated place to store per-user application configuration files.

    A Chairde,
    I'm developing an application that could be deployed on multiple platforms. I'm looking for a location to store per-user configuration files in a OS-integrated way.
    I use a utility class to determine the OS of the users machine. I know from experience that Windows NT5+ likes to store per-user settings/configurations in the %APPDATA% path (which is usually C:\Users\<username>\Appdata\Roaming\<vendor>\<software> etc.) I'm using a call to the environment labels to determine it's location.
    I'm a linux user myself, so I'm aware that most UNIX based Operating Systems like to store personal configurations in hidden folders in the user's home directory (ex /home/<username>/.<application> etc.), Obviously, I'm using a call to the system property user.home to determine that location.
    My Question is in relation to Mac OS and Mac OS X, where would it be a safe location to store per-user configurations? I know OS X is BSD/UNIX based so is it safe to assume to store them as a hidden subfolder of the user.home directory? What about Mac OS classic? Where are per-user settings stored, or is it like Windows 9x and NT4 and lacks proper multi-user setups (although NT4 is somewhat more prepared then 9x) ?
    It would be much appreciated if anybody has any ideas.
    Is Mise,
    Seán Mac Aodha
    PS. I'm not using Javas Property files etc. I've rolled my own exchangeable format for storing key,value pairs.

    I've used databases in the past to store local files but clients have sometimes run into trouble when the database daemon goes down or doesnt start-up normally because of a "improper" shutdown etc.
    In my own implementation of "Settings Files" i have serialized hashtables marked with appropriate metadata stored to the users "application data", a backup or original copy of those settings in the common directory shared by my application framework and then in a networked enviroment, the Settings can be hosted on a database server, so the user can travel between client machines and keep their settings (and files) with them.
    I have, with a bit of googling, come across the most obvious page i should have looked at in regards to Apple Mac OS X
    http://developer.apple.com/documentation/MacOSX/Conceptual/BPFileSystem/Articles/WhereToPutFiles.html
    According to Apple's guidlines, the most suitable place to store User configuration files is in the ~/Library/Application Support/<Application Name> directory.
    and for System-wide configuration files, /Library/Application Support/<Application Name> rather then storing them with the application in the /Applications directory.

  • Wireless configuration files

    Hi Guys, I have a question about wireless configuration files. I have set my wireless up and I am able to get it working. To do this I have to enter the iwconfig command manually.
    iwconfig eth2 essid GillisLAN
    When I do that and restart the network it works fine.  I have read the forum and wiki and have tried many of the suggestions I have found in them. I must be missing something because I cannot get any of the config files to set things up for me. I have posted my the network portion of rc.conf below. I would really like to solve this and need some help.
    David
    # NETWORKING
    HOSTNAME="DsLNVO"
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    #   - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    ###eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    ###eth0="dhcp"
    eth2="dhcp"
    ###wlan_eth2="wlan0 essid GillisLAN"
    ##WLAN_INTERFACES=(wlan0)
    INTERFACES=(lo eth2)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.7.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up (dialog package required)
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng ipw3945d network netfs portmap fam dbus hal crond kdm)

    As far as I know, wpa_supplicant can be setup without encryption.
    Here is the Arch wiki page on setting up wpa_supplicant-
    http://wiki.archlinux.org/index.php/Wpa_supplicant
    Also take a look here at the WPA supplicant section in the gentoo handbook. It includes helpful examples of different configurations which the Arch documentation doesn't.
    http://www.gentoo.org/doc/en/handbook/h … art4_chap4

  • ADF11g - integration with OIM -folder structure for OIM configuration files

    Hi All,
    I'm trying to make call to a remote OIM using OIM API, from my ADF backing bean onclick of a button
    on the JSPX page.
    I'm able to compile the page, but the issues I'm facing is that I'm not able to read the configuration details
    specified for OIM connectivity from the OIM configuration files (authwl.conf, xl.policy, xlconfig.xml).
    So do any one know what is going to be the folder structure for these config files (OIM), when we are integrating to
    this API from ADF backing bean.
    Thanks All .
    Thanks & Regards,
    Dharmathej M

    Hi Daniel, thanks for the response but i readed that doc before asking here and that's one of the reasons of my question.
    On the first line of the doc it says *"This appendix includes instructions that describe how to configure WebSphere so that Oracle Identity Manager (OIM) and Oracle Identity Analytics (OIA) can be installed on separate servers."*
    It assumes both products are on different servers and also the creation of an new profile and node for oia.
    WAS_NDS_HOME/AppServer/bin/manageprofiles.sh -create*
    -templatePath WAS_NDS_HOME/AppServer/profileTemplates/managed*
    -profileName oia-managed01 -profilePath WAS_NDS_HOME/profiles/oia-managed01*
    -nodeName oia-managed01-node01 -hostname hostname*
    Integrate the OIA node to the OIM Cell by typing the following command on the OIA Machine:*
    cd OIM_HOME/xellerate/setup; ./xlAddNode.sh oia-managed01 oia-managed01-node01 192.168.21.9 8883 xelsysadm password1*
    Our intention is to use same machines, servers,... oim is using so we don't need to use extra machines or create extra websphere objects.
    Any tips on that?
    Regards.

  • Imac is no longer able to open the Configuration file

    Hi ,
    I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
    The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
    My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
    I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
    I tried using the Airport Setup assistant (imac), I received this message:
    "Appropriate Airport hardware was bot found on this computer,if you recently
    Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
    The imac does not have a card, nor do i think it needs one.
    I would like to be able to at least open the configuration file.
    Thank you for reading my post.
    Eme
    Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.4)  

    Hi Kes, a star for the company !
    I made an error on my first post I have a Netopia modem, Airport router.
    And so it remains, i guess that there must be an easy answer somewhere
    that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
    As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
    particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
    Good luck,w/ this Q.
    regards Eme
    Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.5)  

  • Error reading configuration file

    I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
    [] 2012-12-20 22:46:32,176 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
    [] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
    com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
              at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
              at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
              at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
    Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
              ... 7 more
    Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
              ... 9 more
    I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
    Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
    Any ideas of why the Validator.bat can't read the configuration file?

    I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
    I have my license server setup (its the Protected Streaming version).
    I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
    I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
    I am using the local key mode to remove one more variable (I have setup a remote key server as well).
    I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
    When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
    DRM error Major[3363] minor:[0] NSError:(null)]
    From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
    I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
    Colour me frustrated

  • How to generate an XML Configuration File for EBS Source Type

    Hi,
    We have installed SES, I want to integrate it to enable for searching repository contracts.
    In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
    For this source I need to specify the Configuration URL.
    Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
    Is there any steps on how we can create this XML file.
    like I would want to know how we can create the XML file and on which folder on the server should I be putting it
    Thanks

    Hi there,
    We are running into same issue and need the exact same information. Can someone help with this question on priority?
    Thanks,
    Darshan

  • The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

    All,
    I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
    configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
    error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
    tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
    As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
    http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
    when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
    This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
    to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
    trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
    groups for different applications, just as I'm trying here with Office 2013.
    Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
    and publish all applications within a package to a user regardless of whether they are in the correct group or not?
    The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
    Thanks

    Nicke,
    The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
    No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
    http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
    2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
    I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
    on the machine when delivered?
    <Configuration>
      <Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
        <Product ID="ProPlusVolume">
          <Language ID="en-us" />
    <ExcludeApp ID="Access" />
    <ExcludeApp ID="InfoPath" />
        </Product>
      </Add>
    </Configuration>
    3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
    through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
    I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
    http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
    rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
    Dan,
    Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
     From what I’ve read / watched  I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
    them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
    (I think).
    The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
    users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
    However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
    suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
    to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
    Is my understanding above correct or have I missed some options / methods?
    If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
    this use case is the AppV method one which will be unsuitable?
    Thanks

  • How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

    How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

    Hi Pawan,
    You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
    ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
    processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
    Follow MSDN-
    http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
    http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
    I hope this helps.
    Rachit
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Configuration file "config\jazn.xml" does not exist

    I have just installed 10g and am trying to setup iSQL*PLUS/dba. I found directions here http://download-west.oracle.com/docs/cd/B12037_01/server.101/b12170/ch3.htm#BCEIHEJF, however, when I try to start the JAZN shell or run the command line to create the dba user, I receive this error:
    oracle.security.jazn.JAZNRuntimeException: Configuration file "config\jazn.xml"
    does not exist. Check your JAAS configuration settings.
    at oracle.security.jazn.JAZNConfig.getJAZNProperties(Unknown Source)
    at oracle.security.jazn.JAZNConfig.access$100(Unknown Source)
    at oracle.security.jazn.JAZNConfig$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jazn.JAZNConfig.getJAZNPropertiesNoCheck(Unknown Source)
    at oracle.security.jazn.JAZNConfig.<init>(Unknown Source)
    at oracle.security.jazn.JAZNConfig.initJAZNSingleton(Unknown Source)
    at oracle.security.jazn.JAZNConfig.getJAZNConfig(Unknown Source)
    at oracle.security.jazn.util.Dbg$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jazn.util.Dbg.getJAZNProperty(Unknown Source)
    at oracle.security.jazn.util.Dbg.getBoolJAZNAndSystemProperty(Unknown Source)
    at oracle.security.jazn.util.Dbg.<clinit>(Unknown Source)
    at oracle.security.jazn.JAZNConfig.fileExists(Unknown Source)
    at oracle.security.jazn.JAZNConfig.getDefaultJAZNConfigFilePath(Unknown
    Source)
    at oracle.security.jazn.JAZNConfig.access$000(Unknown Source)
    at oracle.security.jazn.JAZNConfig$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jazn.JAZNConfig.getJAZNPropertiesNoCheck(Unknown Source)
    at oracle.security.jazn.JAZNConfig.<init>(Unknown Source)
    at oracle.security.jazn.JAZNConfig.initJAZNSingleton(Unknown Source)
    at oracle.security.jazn.JAZNConfig.getJAZNConfig(Unknown Source)
    at oracle.security.jazn.tools.Admintool.refresh(Unknown Source)
    at oracle.security.jazn.tools.Admintool.init(Unknown Source)
    at oracle.security.jazn.tools.Admintool.main(Unknown Source)
    User does not exist in system.
    Has anyone run in to this and found a solution? Is there something more that I need to do? I know nothing about JAAS.

    I have the same problem. Did you resolve this problem?

  • Unable to Initialize Volume Manager from a Configuration File

    I'd like to reattach a D1000 to a rebuilt system. The array contains a raid 5 partition that was built with Solaris Volume Manager (Solaris 9). Since it is the same system all controller/target/slice ids have not changed. I was able to restore the Volume Manager configuration files (/etc/lvm) from a tape backup and followed the instructions provided in the Solaris Volume Manager Administration Guide: How to Initialize Solaris Volume Manager from a Configuration File <http://docs.sun.com/db/doc/816-4519/6manoju60?a=view>.
    All of the state database replicas for this partition are contained on the disks within the array so I began by creating new database replicas on a local disk.
    I then copied the /etc/md.cf file to /etc/md.tab
    # more /etc/lvm/md.tab
    # metadevice configuration file
    # do not hand edit
    d0 -r c1t10d0s0 c1t11d0s0 c1t12d0s0 c1t8d0s0 c1t9d0s0 c2t10d0s0 c2t11d0s0 c2t12d0s0 c2t8d0s0 c2t9d0s0 -k -i 32b -h hsp000
    hsp000 c1t13d0s0 c2t13d0s0
    I then tested the syntax of the md.tab file (this output is actually from my secomd attempt).
    # /sbin/metainit -n -a
    d0: RAID is setup
    metainit: <hostname>: /etc/lvm/md.tab line 4: hsp000: hotspare pool is already setup
    Not seeing any problems I then attempted to recreate the d0 volume, but it fails with the error below:
    # /sbin/metainit -a
    metainit: <hostname>: /etc/lvm/md.tab line 3: d0: devices were not RAIDed previously or are specified in the wrong order
    metainit: <hostname>: /etc/lvm/md.tab line 4: hsp000: hotspare pool is already setup
    Any suggestions on how to reinitialize this volume would be appreciated.
    Thanks, Doug

    You have UserPrincipalName column heading in the csv file so this should be your cmdlet.
    import-csv C:\temp\sharedMailboxCreationTest.csv | ForEach-Object {New-Mailbox -shared  -Name $_.Name  -Alias $_.Alias  -OrganizationalUnit $_.OrganizationalUnit -UserPrincipalName $_.UserPrincipalName -Database $_.Database}
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

Maybe you are looking for