Several identical descriptions for different characteristics values in TC04

Dear all,
I need to maintain several identical language-dependent descriptions for different characteristics values and one unique characteristic. I would like to nkow if that is posible.
Thanks in advance.
Sebastiá

Thanks for your replies,
In fact my problem consists that I can not use the same description for different master values of same characteristic as below:
charact    descrip
1              one
2              one
The sistem returns Nº mensaje: C1223
S.

Similar Messages

How can I reduce the selection for the characteristics value in a BW query

Good morning,
I need to find out how I can reduce the selection for the characteristics values in a BW query.
In a BW query I have a characteristic "Due month".
The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view, without deleting the data for the other years in the cube.
Do you know how this can be done?
Thank you in advance for your feedback.
Kind regards,
Linda Verding
Staff Consultant - CSC

hi,
First thing you have to do is check the report how the data is being restricted only to those months.
1) one it can be variable in which the code is written for that to populate for last few years.
or else it must have been hardcoded for these months.
Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
You need to change this here in the report.
You dont have to delete anything there.
Regards, Siva

Execute BAPI for different input values and dispaly data in a table

Hi all,
I have a specific problem about executing BAPI multiple times for different input values and didplay result in a table.
I am using the code similar to the following logic.
Bapi_Mydata_Input in = new Bapi_Mydata_Input();
wdContext.nodeBapi_Mydata_Input().bind(in);
String in = wdContext.currentperdataElement.getnumber();
in.setDestination_From(10)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
in.setDestination_From(20)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
in.setDestination_From(30)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
And I want to display the data in a single table. I want the result in a table for Bapi execution based on input parameters passed 10,20 30.
But I am getting the table data only for the input parameter 30.I mean its actually display the data in table only for the last input parameter.
So May I ask you all if you know the solution for this problem.PLease advise me with some tips .or sample code is very much appreciated.I promise to award points to the right answer/nice advises.
Regards
Maruti
Thank you in advance.

Maruti,
It seems that WDCopyService replaces content of node, rather then adds to content.
Try this:
Bapi_Persdata_Getdetailedlist_Input frelan_in = new Bapi_Persdata_Getdetailedlist_Input();
wdContext.nodeBapi_Persdata_Getdetailedlist_Input().bind(frelan_in);
final Collection personalData = new ArrayList();
String fr1 = wdContext.currentE_Lfa1Element().getZzpernr1();
frelan_in.setEmployeenumber(fr1);
wdThis.wdGetFreLanReEngCompController().executeBapi_Persdata_Getdetailedlist_Input();
WDCopyService.copyElements(wdContext.nodePersonaldata(), wdContext.nodeNewPersonaldata());
for (int i = 0, c = wdContext.nodePersonaldata().size(); i < c; i++)
personalData.add( wdContext.nodePersonaldata().getElementAt(i).model() );
String fr2=wdContext.currentE_Lfa1Element().getZzpernr2();
frelan_in.setEmployeenumber(fr2);
wdThis.wdGetFreLanReEngCompController().executeBapi_Persdata_Getdetailedlist_Input();
WDCopyService.copyElements(wdContext.nodePersonaldata(), wdContext.nodeNewPersonaldata());
for (int i = 0, c = wdContext.nodePersonaldata().size(); i < c; i++)
personalData.add( wdContext.nodePersonaldata().getElementAt(i).model() );
wdContext.nodeNewPersonalData().bind( personalData );
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

Same Batch Number with different characteristics value

Dear Gurus,
I have the following scenerio:
The finished goods should be maintain in batch with external number and at the time of confirming the finished goods in co11n the client want to capture the finished goods value like length, width and diameter.
So we propose the batch characteristics with class type of 022 for finished good and we maintain the character as length, width and diameter under the batch class 022 and assign the batch class in finished good classification view.
Now the requirement is we want to capture the batch characteristics value length width and diameter with same batch number for multiple confirmation.
Example:
Confirmation      Batch number               batch Class               Length     width     Diameter
1                        1000                              022                              100        50             20
2                        1000                              022                              120        25             10
3                        1000                              022                              150        70             30
Now at present we are trying to capture the batch characteristics with same batch number but our standard system will not allow to maintain the different batch characteristics value under same batch number. If we overrite the batch characteristics in msc2n transaction the last value maintained be copied to all batch number. but we want same batch number with different batch characteristics value.
Please share your idea and try to solve..
Regards,
Vimal

Dear Vimal,
It is not possible to maintain multiple batch characteristics in one batch.
Work around is to create original batches and assign to your production order. During CO11N, generate one batch per confirmation. There is a report in batch information cockpit to link between original batch and batch per confirmation.
Rgrds,

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Posting for different APC values to different Depreciation Areas

Hi All,
I am trying to manage in ECC 6.0, different APC values for different depreciation areas, i.e. APC values differ from one dep area to another. I need to post the APC to GL only (i.e. for the 01 i.e. Book Depreciation area). For the remaining depreciation areas for the purposes of reporting I need to maintain different APC values.
One way to achieve this is by maintaining Parallel ledger. Is there any other way this can be achieved.
Thanks in advance
Krishna

Hi,
Use the trnasaction ABSO and clik in the button Dep. Area.
Now you can fill in the value by depreciation area. (when this is set up) use the Trans act type 100
Paul

Missing description for FI standard values (ie posting key 40)

Hello,
I'm deploying the SAP ECC6 Financials solution in French and I'm facing a very strange issue. The standard descriptions for some very classical SAP values are missing in my language (French). For instance, the french description is blank for all the standard posting keys (eg posting key 40 with text "blank"), for all the SAP standard Account groups (eg SAKO), for all the valuation classes, etc. When I connect in english, everything is OK with standard english text. I have the same problem with CO. The French text in other modules (SD, MM) seem ok.
Two questions hence:
- is it an SAP installation problem or a FI customizing issue ?
- there is already some customizing in this environment using those values. What would be the impact of reactivating the texts in french ?
Thank very much for your answer.

Hi,
Check with basis (Tcode: SMLT)
I could not check it as i dont have authorization in my system.
Regards,
Sridevi
<i>* Pls. assign points if useful</i>

Different execution plan for same query but for different condition value

Hi All,
I'm facing a strange situation where same query for different condition not working.
1--
Select top 10 * from revenuefact(nolock)
where feecode ='OW4'
2--
Select top 10 * from revenuefact(nolock)
where feecode ='BTE'
1st query is returning result easily but 2nd query is taking too long. Column
feecode has already Non-clustered index and Clustered index is also available for another col RevenueSID.
I was surprised when checked the query execution plan for both the above queries which is quite different (as per attached below). Can anyone suggest me the reason behind it.
And solution for the same. One more thing that data for feecode BTE is inserting through different source instead of others feecode and table contains more than 300 million rows.

When I speak with people inside Microsoft who work with the optimizer, the refuse to accept the work "bug" when a query produces the correct result, but with a suboptimal plan. They prefer to use the word "limitation".
The limitation here is that when the optimizer compares two plans, it only looks at the estimated cost. As far as I know, it does not perform any analysis from the perspective "what if the statistics are wrong"? They do provide the hint OPTIMIZE
FOR UNKNOWN, but that does not work then there is a constant as in this case.
The optimizer will surely distinguish between TOP 10 and TOP 10000000. With the latter, you have all reason to expect a Clustered Index Scan no matter which value you search for - unless you pick a value for which the histogram indicates that there are no
rows.
Interesting enough, I was able to reproduce the situation in my Northgale database, which is an inflated version of Northwind, and where statistics should be accurate.
SELECT TOP 10 * FROM Orders WHERE EmployeeID = 8
results in a CI scan, and so does also EmployeeID = 7, and even 5. There are only 2292 rows out of a total of 344305 rows. If I try EmployeeID 808 for which there are 1797, the optimizer goes for the index seek.
Erland Sommarskog, SQL Server MVP, [email protected]

Tables & Fields for AFS characteristics values

Hi Gurus,
Need a help to find otu the Characteristic vlues of AFS-Material FIELD NAMES and their TABLE NAMES.
If any one konws please let me know that will be great.
Exactly the i want to find out the FIELD NAMES of the Characteristic Values of a AFS Material. Where these characteristics values are going and sitting in Which FIELDS and in which TABLES.....Ok...
Advance thanks aand Regards,
Madhu.G

Sudha,
You can find all material document details in table MSEG.
Regards,
John.

Material description for different language

Hi SAP Gurus,
Please advise how to pull material description maintained in different language ?
I need to download this material descriptions maintained in all languages for a certain type of materials of one plant.
Thanks for your help.
Regards,
Manoj

you either create a quickview by joining MARC and MAKT tables for this.
or much easier. you press F4 in a material number field.
then you go to search help W plant material.
there you erase the language from the selection pop-up and execute
in the hitlist do a right mouse click and you can directly download

How to run the same procedure in parallel for different parameter value.

Hi There,
I am currently working on extracting data in to flat file and I am able to do so for one revenue month (e.g. 200101) using PL/SQL procedure(get_rev_data). it takes almost 1 hour to execute the procedure completely and it generates 400 MB data file. Now I have to run this procedure for last 10 yrs of data (i.e. 120 revenue months) . my prolem here is to figure out a way/logic in such a way that I can run the procedure in parallel for each revenue month and at the same time it will write the data in respective data file for each revenue month. so the final result of this exercise would be 120 flat files, one for each revenue month with file names like
EXTRACT_00001001 to EXTRACT_00001120.
where
first five digits : 00001 will indicate the Extract run number and
last three digits : 001 will indicate the thread number for each run.
I am thinking of doing this by creating a table "RevMonth" with two values (revenue_month, thread_num) and calling the procedure in a simple select statement and passing revenue_month as parameter of the procedure like
SELECT get_rev_data(revenue_month, thread_num)
FROM REVMONTH;
But I am not sure if that will do the needful. Any idea on how to achieve this will be of great help. Thank you.

Hi Smit,
Thanks for the advise. I am not planning to run for all 120 months at once. actually I am planning to run like 1 year (12 revenue months at a time). I am not sure if that will work well but I was planning to run this through shell script (Unix) and will call the same procedure with different parameter (revenue_month and Thread_number) values and see what happens. I hope that will run in parallel for each revenue month.
Let me know if you have more knowledge about it. THanks a lot.
Thanks,
.

Dynamic Description for Key figure values

Hi Experts,
I got a requirement for change the description in query analyzer.
              Month    200901                                         200902                            200903
                 qty        value   Past PRICE                qty    value    future price qty    value    future price
Material      10         50          5                              7       70           10          7       77           11
My requirement is price heading we need to show current date to previous months header is Past price and current date to future months we need to Future price.
Already I tried with two restricted key figures with current montthless than one key figure and currentmonthgreater than one keyfigure. When I using in query both key figure displayed in both sides.
I want to show past price heading for Less than current month and future price heading for greater than current month.
Please let me know any possibilities to show the description dynamically.
Thanks,
Chandra

Hi,
Here I'm giving sample code this will give the Date and Date-1 and Date-2 based on your Input date ZCDAY.Create 'ZT_DAY' 'ZT_DAY1' and 'ZT_DAY2' Text varaibles and use the code.
In the same way change the code for your requirement.
TO get the Date (TEXT VAR) based on ZCDAY Input variable***********
    WHEN 'ZT_DAY' .
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZCDAY'.
        IF sy-subrc = 0.
          CLEAR: l_s_range.
          l_s_range-low+0(2) = loc_var_range-low+6(2).
          l_s_range-low+2(1) = '.'.
          l_s_range-low+3(2) = loc_var_range-low+4(2).
          l_s_range-low+5(1) ='.'.
          l_s_range-low+6(4) = loc_var_range-low+0(4).
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
        ENDIF.
      ENDLOOP.
TO get the Date-1(TEXT VAR) based on ZCDAY Input variable***********
    WHEN 'ZT_DAY1' .
    DATA: ZT_DT1 TYPE SY-DATUM,
          ZT_DT2 TYPE SY-DATUM,
          ZT_SDT TYPE SY-DATUM,
          ZT_YR(4) TYPE N,
          ZT_DY(2) TYPE N,
          ZT_MT(2) TYPE N,
          ZE_TT(2) TYPE N.
          ZT_SDT = SY-DATUM.
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZCDAY'.
        IF sy-subrc = 0.
          CLEAR: l_s_range.
          ZT_DY = loc_var_range-low+6(2).
          ZT_MT = loc_var_range-low+4(2).
          ZT_YR = loc_var_range-low+0(4).
      CONCATENATE ZT_YR ZT_MT ZT_DY INTO ZT_DT1. "YYYYMMDD
      CALL FUNCTION 'DATE_CREATE_2'
        EXPORTING
         i_datum_ein                   = ZT_DT1
         I_KZ_INCL_AUS                 = '1'
         I_KZ_INCL_EIN                 = '0'
         I_KZ_ULT_AUS                  = 'X'
         I_KZ_ULT_EIN                  = 'X'
         I_STGMETH                     = '0'
         I_SZBMETH                     = '0'
         I_TAGE                        = 0
       IMPORTING
         E_DATUM_AUS                   = ZT_DT2.
          l_s_range-low+0(2) = ZT_DT2+6(2).
          l_s_range-low+2(1) = '.'.
          l_s_range-low+3(2) = ZT_DT2+4(2).
          l_s_range-low+5(1) ='.'.
          l_s_range-low+6(4) = ZT_DT2+0(4).
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
        ENDIF.
      ENDLOOP.
***TO get the Date-2 based on ZCDAY Input variable***********
    WHEN 'ZT_DAY2' .
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZCDAY'.
        IF sy-subrc = 0.
          CLEAR: l_s_range.
          ZT_DY = loc_var_range-low+6(2).
          ZT_MT = loc_var_range-low+4(2).
          ZT_YR = loc_var_range-low+0(4).
      CONCATENATE ZT_YR ZT_MT ZT_DY INTO ZT_DT1. "YYYYMMDD
      CALL FUNCTION 'DATE_CREATE_2'
        EXPORTING
         i_datum_ein                   = ZT_DT1
         I_KZ_INCL_AUS                 = '2'
         I_KZ_INCL_EIN                 = '0'
         I_KZ_ULT_AUS                  = 'X'
         I_KZ_ULT_EIN                  = 'X'
         I_STGMETH                     = '0'
         I_SZBMETH                     = '0'
         I_TAGE                        = 0
       IMPORTING
         E_DATUM_AUS                   = ZT_DT2.
          l_s_range-low+0(2) = ZT_DT2+6(2).
          l_s_range-low+2(1) = '.'.
          l_s_range-low+3(2) = ZT_DT2+4(2).
          l_s_range-low+5(1) ='.'.
          l_s_range-low+6(4) = ZT_DT2+0(4).
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
        ENDIF.
      ENDLOOP.
Thanks
Reddy

DP - No authorization for all characteristics value

Dear All,
I am trying to implement the role SAP_APO_FCS_SU (APO: Demand Planning Standard User) in SCM 5.0.
When I logon as a user who has been assigned to this role and try to load a predefined selection profile or create one, I get the error You do not have authorization for all the characteristic values selected.
Can you please let me know what I am doing wrong?
Thanks in advance for your help.
Emilie

Hi Raj,
I created a BI authorization object for my additional characteristics (ie, other than 9AMATNR and 9ALOCNO) and then added to the role.
Below is the link for how to create BI authorization object.
[http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm]
Regards,
Emilie

Different output from essentially Identical IDML for different output types

I am testing a website enhancement locally that uses ID CS6, which i have running via the command prompt. The page first displays a .jpg preview of the file you are designing which is working correctly. When the user is finished editing the document they save it to a PDF but that PDF never matches the jpg in that a group of fields are always missing.
I extracted all the contents of the IDML files being used to generate the two files and combed through them and they are essentially identical. The only difference between them is any reference to the file path of IDML file and the file type I am passing to ID to generate.
Here is the JPG
And the PDF
I can provide exerpts from any file found within the IDML if it will help.
Any and all help is appreciated!

So I found the solution to this myself.
When I was comparing the XML files found within the IDML I wasn't concerned with XML syntax as all the files were valid XML. Whatever InDesign Server uses to parse XML apparently does not conform to XML standards because it does not parse this correctly:
<TagName Attribute="Value"/>
It requires the following syntax instead or it doesn't seem to parse correctly causing botched content generation like that seen in my OP.
<TagName Attribute="Value" />
Hopefully this helps someone else down the line.

Using Broadcaster to run a query for sequential Variable Values

Hi SDN Community
I came across a powerpoint slide regarding broadcasting which i hope to use in one of our reports.
We are on SAP BW 35.
Broadcaster has been used
Your opinion would be greatly valued in regards to the direction i should proceed for our particular purpose.
We basically have a report which is a web report. This contains much html and javascript enhancements.
But it essentially has queries with a series of variables.
The customer would like the Queries to be cached for each variable value for performance reasons, on a daily basis.
eg. Run the same query for Variable value BMABRM, then BMASRM, etc...
In a loop fashion.
Do not need to set a process chain to trigger broadcaster, or rather simply to schedule the broadcaster to run daily.
I would basically then want to run this (cache) query in an iterative fashion, ie. rerun it for all the sites.
Can you please make a recommendation to which is the best approach, whether a process chain should be set up, and any experience you may have had setting up a query to rerun for different variable values. We would of course want the query to run successfully before rerunning it for the next variable to avoid locks, etc.
Thank you in advance.
Simon

Hi Rahul,
i have been trying to use the process chain functionality to do this but unsure how to do it.
Which objects do you use in the process chain:
Trigger Event Data Change (for Broadcaster)
or Execute APD Model
or Precalculation of Web Templates
i am unsure how to incorporate the queries into the process chain.
If you have any steps , it would be much appreciated.
Thank you.
Simon

Several identical descriptions for different characteristics values in TC04

Similar Messages

Maybe you are looking for