SFTP receiver error: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE
Hi,
When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
Thanks,
Vinayak
Hi Ram,
we checked with network team and port 22 is open and they are able to ping to the target system.
we checked the seeburger logs and we see EOF received from remote site error:
Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
#at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source)
Thanks,
Vinayak.
Similar Messages
-
How to fix ipad error -1004 "could not connect to the server"
I am trying to access the tablet edition of Vanity Fair. I already have a subscription and when I click on the "Tap here for acces to the tablet edition" it takes me to a screen & this error message pops up:
Cannot Open Page
This page cannot be opended because of an error
This error is "Could not connect to the server."(-1004).
I have deleted, reinstalled via itunes on my mac, done a hard restart and nothing seems to be working. I can browse the web using safari and am connected to the internet via wifi.
Any suggestions?I have the same issue, too. My New Yorker subscription is fine, always has been. But my Conde Nast Traveler subscription won't work. I can get to the screen where you enter your information (either with name and address or subscription number and zip code), but once I press Continue I get the error.
I emailed Conde Nast's customer service, and this is what they said:
Dear Subscriber:
Please accept our sincere apologies for the inconvenience you have
experienced.
We have applied a fix to the app for the server error and you will need
to close and re-open your app. To do so, please double click the "home"
button to close the running app and then re-open your app.
Please let us know if you still experience any problems.
If you should need further assistance, please be sure to include all
previous e-mail correspondence.
Thank you for your interest in Conde Nast Traveler.
Sincerely,
Shar
That didn't work. I tried the restarting the iPad, as someone here suggested, but that didn't work, either. Interesting that this seems to be a Conde Nast issue - my NY Times and National Geographic subscriptions are just fine, too.
I'm afraid I'm not sure what the guidance in this knowledge base article means: "Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software." How does one do that on one's iPad?
I actually wonder if it's a firewall issue. Are any of you attempting to enter this information at work, for example? I am, and my company has a firewall/proxy that gives me issues sometimes. I'm going to try to find a wifi hotspot at lunch to see if it'll work there. -
When will come this error Could not connect to SMTP host: son1175, port: 25
Hi all
we configure SMTP server on Linux ES,my java application run on same server
from my application trying to send a mail i got this error
[0] EmailConnection.getConnection: Attempting connection...
DEBUG: setDebug: JavaMail version 1.3.1
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "son1175", port 25
[0] EmailConnection.getConnection: Cannot connect to server with configuration
smtp://padmanab:*@son1175/. Port = 25. Security: none.
Properties: {mail.port=25, mail.smtp.timeout=30000, mail.smtp.connectiontimeout=30000}
Could not connect to SMTP host: son1175, port: 25;
nested exception is:
java.net.ConnectException: Connection refused
2005-03-30 10:03:03,751 INFO [plt.userManagement] [PoolThread-9] "Password Reset" email could not be sent to vallish at the email address, "[email protected]".
but mail server is configured currectly
please tell cause of this error out java application or my SMTP server
regards
satyaCould not connect to SMTP host: son1175, port: 25;
nested exception is:
java.net.ConnectException: Connection refusedYou didn't notice that this question is asked every day here?
Your computer can't connect to a computer named "son1175", or if it can then that computer isn't running a server listening at port 25. Talk to your network people if your computer name is the right one and ask them why not. It is nothing to do with programming. -
Yes, I am connected... how else could I write this?
Adobe chat doesn't help. Adobe Tech doesn't help!
I purchased a book and I want to read it!!! HELP!
Also, since this is the first book I have downloaded there is not "de-authorize" option.
Thanks.yes... uninstall 4.0... go to download site... scroll down and download 3.0install 3.0 and authorize computer than you can upgrade to 4.0
Connection Error: DE could not connect to the activation server. Pls make sure u r connected to the internet.
created by readingjenn in Adobe Digital Editions - View the full discussionI am also having the same issue. Following to see if you get an answer. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063023#7063023 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063023#7063023 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Javax.mail.MessagingException: Could not connect to SMTP host:
here is a part of my code
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class Mail {
/** Creates a new instance of PostMail */
public Mail() {
public void postMail( String recipients[ ], String subject, String message , String from) throws MessagingException
boolean debug = false;
//Set the host smtp address
Properties props = new Properties();
props.put("mail.smtp.host", "smtp."_____".com");
// create some properties and get the default Session
Session session = Session.getDefaultInstance(props, null);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++)
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Optional : You can also set your custom headers in the Email if you Want
msg.addHeader("MyHeaderName", "myHeaderValue");
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
Here is the exception i rec'vd
javax.mail.MessagingException: Could not connect to SMTP host: smtp.google.com, port: 25;
nested exception is:
java.net.ConnectException: Connection refused: connect
at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1282)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
at javax.mail.Service.connect(Service.java:275)
at javax.mail.Service.connect(Service.java:156)
at javax.mail.Service.connect(Service.java:105)
at javax.mail.Transport.send0(Transport.java:168)
at javax.mail.Transport.send(Transport.java:98)
at Mail.postMail(Mail.java:45)
at ArchMain.<init>(ArchMain.java:30)
at ArchMain$6.run(ArchMain.java:360)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:232)
at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1250)
... 17 morepackage MailDao;
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
import java.text.*;
import java.text.DateFormat.* ;
import java.io.*;
import javax.mail.*;
import javax.mail.internet.*;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.activation.*;
import javax.mail.search.*;
import java.util.Vector.*;
import java.sql.*;
public class SendMail {
String SMTP_HOST_NAME = "smtp.techpepstechnology.com";//smtp.genuinepagesonline.com"; //techpepstechnology.com";
String SMTP_AUTH_USER = "[email protected]"; //[email protected]"; //techpeps";
String SMTP_AUTH_PWD = "demo"; //techpeps2007";
public void postMail( String recipients[ ], String subject,
String message , String from,String msgType) throws MessagingException {
boolean debug = false;
Properties props = System.getProperties();
props.put("mail.transport.protocol", "smtp");
props.put("mail.smtp.host", SMTP_HOST_NAME);
props.put("mail.smtp.auth", "true");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(props, auth);
session.setDebug(debug);
// create a message
MimeMessage msg = new MimeMessage(session);
// MimeMessage mimemessage = new MimeMessage(simplemailuser.getSession());
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++) {
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
if(msgType.equalsIgnoreCase("")) {
//mimemessage.setText(s4);
msg.setContent(message, "text/plain");
else {
MimeBodyPart textBodyPart = new MimeBodyPart();
textBodyPart.setText(message);
MimeBodyPart fileBodyPart = new MimeBodyPart();
FileDataSource fds = new FileDataSource(msgType);
fileBodyPart.setDataHandler(new DataHandler(fds));
fileBodyPart.setFileName(fds.getName());
//step:5 create the multipart/container to hold the part
Multipart container = new MimeMultipart();
container.addBodyPart(textBodyPart);
container.addBodyPart(fileBodyPart);
//step:6 add the multipart to the actual message
msg.setContent(container);
try{
Transport transport=session.getTransport("smtp");
transport.connect();
transport.send(msg);
transport.close();
}catch(Exception e) {
e.printStackTrace();
private class SMTPAuthenticator extends javax.mail.Authenticator {
public PasswordAuthentication getPasswordAuthentication() {
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
public static void main(String arg[]) {
SendMail sm = new SendMail();
String[] s ={"[email protected]"};
try{
sm.postMail(s,"hello","This is testing of mail","[email protected]","");
catch(Exception e)
e.printStackTrace();
//sm.sendMsg("demo", "demo");
System.out.println("Mail Sent");
i also got the follwing error this code work fine in jcreator but i used this in netbeans it throws a exception
plz.....help
javax.mail.MessagingException: Could not connect to SMTP host: smtp.techpepstechnology.com, port: 25;
nested exception is:
java.net.ConnectException: Connection refused: connect
at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:867)
Mail Sent
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:156)
at javax.mail.Service.connect(Service.java:256)
at javax.mail.Service.connect(Service.java:135)
at javax.mail.Service.connect(Service.java:87)
at com.sun.mail.smtp.SMTPTransport.connect(SMTPTransport.java:93)
at MailDao.SendMail.postMail(SendMail.java:86)
at MailDao.SendMail.main(SendMail.java:110) -
Could not connect to remote service [rmi://localhost:1099/
I have a large deployment with two filr appliances and one database and one search index.
I am running zen load balancer in front of the appliance which works great.
There are no config changes to the filr appliances in terms of port redirection.
I had an issue upgrading from 1.0.1 to 1.1 so I blew it away and started fresh.
After I installed and configured the appliances there were no issues . Now the :9443 configuration section will not work I get
(this is just the top lines)
HTTP ERROR 500
Problem accessing /. Reason:
Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
Caused by:
org.springframework.remoting.RemoteConnectFailureE xception: Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
at org.springframework.remoting.rmi.RmiClientIntercep torUtils.convertRmiAccessException(RmiClientInterc eptorUtils.java:190)
at org.springframework.remoting.rmi.RmiClientIntercep tor.doInvoke(RmiClientInterceptor.java:347)
This is on all appliances (search,data,filr1,filr2)
I restarted filr2 and the admin section 9443 comes back for a short time. Maybe 10 minutes then I get the same error. But now after the restart I get and authentication box asking for credentials on 8443. when I put in the admin or other creds it directs me to a page that says
HTTP Status 500 - Filter execution threw an exception
type Exception report
message Filter execution threw an exception
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Filter execution threw an exception
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
root cause
java.lang.ExceptionInInitializerError
java.lang.J9VMInternals.initialize(J9VMInternals.j ava:259)
org.kablink.teaming.asmodule.spring.security.userd etails.DecryptedPasswordUserDetailsService.loadUse rByUsername(DecryptedPasswordUserDetailsService.ja va:51)
org.springframework.security.web.authentication.http://www.DigestAuthenticationFilte...lter.java:144)
org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
org.springframework.security.web.context.SecurityC ontextPersistenceFilter.doFilter(SecurityContextPe rsistenceFilter.java:87)
org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
org.springframework.security.web.FilterChainProxy. doFilter(FilterChainProxy.java:173)
org.springframework.web.filter.DelegatingFilterPro xy.invokeDelegate(DelegatingFilterProxy.java:346)
org.springframework.web.filter.DelegatingFilterPro xy.doFilter(DelegatingFilterProxy.java:259)
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
I have rebooted to no avail. If I restart the jetty service I do get the appliance login for 9443 but if I try to login I get the same message about [rmi://localhost:1099/
again if I reboot then 9443 works for 10 mins but 8443 gets hosed. Everything worked fine until I rebooted the appliance.
I am afraid to even reboot these appliances now in fear that the will cease to work.
I should also note that this was part of the upgrade issue I had after I rebooted all of the appliances.
Thanks in advance.Originally Posted by bschilliger
The same issue here:
HTTP Status 500 - Filter execution threw an exception
type Exception report
message Filter execution threw an exception
description The server encountered an internal error that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Filter execution threw an exception
org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
The password in the FILR appliance configuration 'Outbound E-Mail' was too complex (with special characaters). After changing the special characters with letters and/or numbers, the server starts without any troubles!
Regards from Switzerland,
Beat -
Premiere Elements 8 "Could not connect to remote server" when sharing to YouTube
I'm trying to share my Adobe Premiere Elements 8 video to YouTube through the task panel, but I get a "Could not connect to remote server" message. My computer is connected to the Internet. I notice at the bottom of the message there is "Open the Opera Help" and "Go to Opera's on-line support desk." I don't have Opera on this computer, so maybe that's it?
No. You don't need Opera.
Have you gone to Edit/Preferences and ensured that your Web Services are up to date?
Otherwise, it could be that YouTube changed settings on us again. If that's the case, you'll need to post to it manually, per the FAQs to the right of this forum.
http://forums.adobe.com/thread/390608?tstart=30 -
Could not connect to remote service - java.lang.NullPointerException
Hi,
I'm struggling to get RMI to work on two servers. Locally my client and server work fine together although when I deploy I get a null pointer exception the first time I try and invoke a remote method. I've tried stopping the server app to see if it is actually connecting at I get a connection refused exception when its stopped so I'm assuming it must be connecting.
Could not connect to remote service - java.lang.NullPointerException
com.jws.remoteServices.RemoteUpdateServer.addNewReport(RemoteUpdateServer.java:61)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
java.lang.reflect.Method.invoke(Method.java:616)
sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:322)
sun.rmi.transport.Transport$1.run(Transport.java:177)
java.security.AccessController.doPrivileged(Native Method)
sun.rmi.transport.Transport.serviceCall(Transport.java:173)
sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:553)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:808)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:667)
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
java.lang.Thread.run(Thread.java:636)
sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:273)
sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:251)
sun.rmi.server.UnicastRef.invoke(UnicastRef.java:160)
java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:195)
java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:149)
$Proxy0.addNewReport(Unknown Source)
jasperserver.ReportHandler.run(ReportHandler.java:81)Any help would be greatly appreciated,
Regards,
Dan
Edited by: danblackhust on Jul 18, 2010 3:54 AMShow us the code that threw and caught this exception.
-
Why isn't my IPOD showing up in itunes? Message recevied "itunes could not connect to this IPOD because an
unknown error occurred OxE8000003.See here: iOS: Unknown error containing '0xE' when connecting to a Windows PC
B-rock -
I downloaded iTunes. I was going to put an MP3 lecture on iTunes so I could put it on our new iPad but I got the message:
"iTunes could not connect to the iTunes store. An unknown error occurred (-3212). Make sure your network connection is active and try again." I was able to get on this site so I know the connection is fine. Any ideas how to fix this?
Thanks.Hello Buck
If you are having issues with the iTunes store, check out the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am trying to restore my son's iPod Touch 4th generation. I went about 20 minutes into the recovery process and got the error message, iTunes could not connect to iPod because it is locked with a passcode you must enter your passcode on iPod before it can be used with iTunes. The whole problem started with my son putting in a password that he has now forgotten. How do I get passed this?
its the 1st time ive heared of this
can u link it to an computer to add music?
if so you should be able to restore it
connect to itunes under the devices tab click on the ipod now click summary on the top
on the page you should see and check for update's or update tab
below that there should be an restore tab just click on the restore tab
NOTE RESTOREING WILL DELETE EVERYTHING YOU ADDED TO THE IPOD AND IT WILL BE BACK TO FACTORY SETTINGS -
PC Suite - E60 - Error Message "Could not connect ...
Hi Everyone!
PC Suite displays that the phone (E60) is connected via Bluetooth. No problem there, but I still cannot connect to the phone.
I upgraded (clean install) to the last version because I often had problems when I pressed "Messages" or any other item in the PC Suite that would connect to the phone.
Always the same message "Could not connect to the phone" would come up.
Often the error went away by simply restarting the notebook (Dell 640m).
Now that I've upgraded I cannot connect to the phone at all, which is strange because according to PC Suite I am connected. Also the pairing on the phone shows the notebook as usual.
Any hints what the problem could be?
I reinstalled PC Suite and all other software connected to it several times (also went back to 6.83), always using a registry cleaner, also used the repair feature. Now neither 6.83 nor 6.84 can connect to the phone.
Thanks in advance for any help!
Here the sys info:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.4
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Microsoft Outlook:
Version 10.0
Build 6822
Bluetooth stacks:
WIDCOMM Bluetooth stack
Version 5.0.1
Build 2609
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180There are numerous posts in this forum (and any other forum out there) about the problems Windows PCs have about the fact that in XP there is Microsoft provided native Bluetooth software and then for a reason or another you have installed the Widcomm Bluetooth (or that may have even been installed by the PC vendor)
Those Bluetooth softwares conflict with each other and particularly it is difficult fot PC Suite to use those 2 softwares simultaneously. PC Suite dores not know itself if the phone is "present", it knows about the connected phone only if the Bluetooth software in the PC tells that info.)
I had that same situation, it worked (kind of), but PC boot and stand by etc, always caused problems.
Search for "uninstall widcomm" in this forum and you will find many posts about the topic. most likely also you will find instructions how to disable widcomm and lett Microsoft Bluetooth Enumerator take over.
But read the posts first since I do not know which setup you would prefer. Also, while I briefly looked at the posts there at least has been some talk about anti-virus programs interference with Bluetooth softwares, but I am not sure if that is relevant anymore. -
Hi,
We have successfully configured network policy server on windows server 2012 and all wireless clients could connect to our network except windows 7 and xp non domain clients.The clients that are successfully authenticated includes windows 8,mobile users
(andriod + iOS) domain as well as non domain clients.If we join windows 7 pc to the domain it successfully connects but non domain clients could not connect.We have large number of windows 7 users that have their own laptop machines and we dont want
each laptop to join the domain.
On server event 6273 generated with reason code 265 "The certificate chain was issued by an authority that is not trusted".Plz help how to resolve this issue.I have searched on the internet but no proper solution found.Hi,
According to the error message, it seems that you used certificate-based authentication methods and the non-domain computers has no Trusted Root Certificate for the CA that enrolled the certificate for the NPS.
For more detailed information, please refer to the links below:
Certificates and NPS
Manage Trusted Root Certificates
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
I have a MBP 17" Late 2011 model with the Intel HD 3000 and AMD 6770M grpahics cards. I have read through many of these posts and found the exact same problem that I am having as well. I hook up a monitor through the VGA connection; Windows sees the
-
Problem about release of blocked invoices automatically
Hello, We have many blocked invoices against payment that come from I/R in MM. The main reasons that they were blocked come from Quantity and Date difference. We know that invoices with the blocking reason "quantity" or "date" are released automatica
-
Anyone else getting this error on their Macook? Preview is selected in the "Command-J" options.. Also, clicking on spacebar when a filename is selected does not load up a quickview either. Any ideas would be most appreciated!
-
In the walkthrough of Firefox 4 it shows just one orange button where everything is kept all together, but I still have all the single buttons from Firefox 3. I tried re-downloading Firefox 4 but it didn't change it to the new version, so I'm kind of
-
Get value of Table data in Event of Table maintaince generaor
Hi Expert, I want content of table in event of table maintenance generator (Event 01 - Before Saving Data in Database). can you please tell me that how can i achieve this value of whole table in this event. Regards, Chintan Shah