Sharepoint 2007 and BO Edge 3.0

Hi,
is it possible to use BO Edge 3.0 and Sharepoint 2007 using the Sharepoint Portal Integration Kit 3.0?
In the Sharepoint Portal Integration Kit 3.0 Installation Guide it says we should install BO Enterprise 3.0 .net SDK. But with BO Edge 3.0 there is no .net SDK available.
Does this mean, we can't use BO Edge 3.0 and Sharepoint 2007?
Thanks very much,
Karin

Hi,
yes, at least i have no more error message in query designer
I created a new Universe, and a new BO report.
Abfrage 1 - ADMIN
Datenbankfehler. Der Datenbankfehlertext lautet: Die MDX-Abfrage SELECT { .[42CDTAXG9CWGASEEGWHYLO9NZ] } ON COLUMNS , NON EMPTY .[LEVEL00].MEMBERS ON ROWS FROM konnte nicht ausgeführt werden. Fehler See RFC trace file or SAP system log for more details. (WIS 10901)
this is the error message I get
but do not know where the RFC trace file or SAP system log is
Thanks
Vince

Similar Messages

Integration Option for SharePoint 2007 and Edge?

Does this support Edge 3.1? I know that in the official documentation for the Sharepoint 2007 PIK it never said Edge was supported, but I see posts indicating people have gotten it to work with Java InfoView.
However, is Edge 3.1 supported for the larger Integration Option for SP2007? Also, I assume it would be only for Java InfoView since Edge utilizes a WACS vs. standard .NET SDK.
Please advise.
Edited by: Jay Riddle on Oct 6, 2009 12:14 AM

The newest release of the sharepoint kit called internally (ipoint) should work fine with java infoview. I haven't set this up my self and you may need to open an incident with support to verify if Edge supports the newest sharepoint kit.
Regards,
Tim

Sharepoint 2007 and SQL 2008 SP3 on Windows Server 2008 Enterprise SP2 (64-bit)

Is there any documentation we can check if SQL 2008 SP3 is compatible with Sharepoint 2007 SP2 or SP3? Both Sharepoint and SQL servers are running on separate Virtual machines (Windows Server 2008 Enterprise SP2(64-bit)). Currently DB is running on
SQL server 2008 SP2, and we would like to have SP3 loaded on it, but want to find if there is any compatibility issue?
Thanks in advance!
mh

I'm not aware of any known issues with SQL Server 2008 SP3 and SharePoint 2007. I did a quick check and saw one person reporting an issue with their Central Admin site after applying the SQL Server update, but that's it.
With that being said, I would strongly encourage you to test out the application of that SQL Server service pack in a non-production environment well before you apply it in production. There is always a chance that your environment has something set up in
it that would cause an unexpected issue, and the best way to get an idea of whether or not an issue exists is by doing it somewhere else first before you do it in prod.
John
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

Differences between SharePoint 2007 and 2013 security options?

Hi,
We just did a test upgrade from Sharepoint 2007 to Sharepoint 2013 by copying over the content database. One thing we are noticing is that users who had permissions to upload to a document library no longer have that option in 2013. Is there a difference
between the 2007 and 2013 "contribute" permission?
What can I do to fix this issue?
thanks,
Sherazad

their is no difference between 2007 & 2013 for Contribute premission.
Contribute having the same rights in 2007 and 2010.
Read permissions, plus:
Add Items
Edit Items
Delete Items
Delete Versions
Browse Directories
Edit Personal User Information
Manage Personal Views
Add/Remove Personal Web Parts
Update Personal Web Parts
You can further check here:
SP 2013: http://technet.microsoft.com/en-us/library/cc721640.aspx
Moss 2007: http://technet.microsoft.com/en-us/library/cc721640(v=office.12).aspx
May be you edit the Contribute permission level, make sure its on its default.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

DPM 2010 SharePoint 2007 and SQL 2005 long time Recovery point

Hi, i have two farms with two dedicated DPM for each of them
SP 2010 with SQL 2008 R2
SP 2007 with SQL 2005
While recovery point is running for 2010 multiple databases are taken simultaneously while in 2007 only one database at time in sequential order which leads in large time for recovery point of farm.
any recommendations or modification known for this behavior
Thanks
Mina

Hi,
I have not tried this with SharePoint workload - but give this a try.
Steps to enable parallel backups for SQL 2005 databases:
1. The fix in SQL Writer to enable parallel backups has been rolled out as part of SQL server SP4. So please update SQL Server 2005 to SP4.
2. On DPM Server, create Registry Key “SQL2005_ParallelBackup” under “HKLM\Software\Microsoft\Microsoft Data Protection Manager\Configuration”
3. Create String Value with Name equals FQDN of SQL Server
and empty value, under registry key “SQL2005_ParallelBackup”
Let me know if that worked.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Please Help!! Lists and libraries suddenly blocked just before migrating from SharePoint 2007 to 2010

Hi all,
I took several weeks preparing the migration of a large farm from SharePoint 2007 to 2010 using the system of restore databases and mount site collections. I've built the new farm and I have done several full migration tests to verify that all was well the
day of final migration.
The farm consists of three virtual servers: one with SQL Server 2012 and two with SharePoint Server 2010. Upon completion of the tests we've moved the servers to another network. We have turned on the servers and everything seems to work fine.
Just the day of the final migration I wanted to check the HealtReports list of the Central Administration, and when I wanted to look up an alert, the view window has not shown me anything and ribbon has appeared with all options grayed. Days ago worked fine.
Alarmed by this, I have started to check all lists and libraries in the Central Administration and the same happens. I can not view or change the items, nor add. Neither I can change the properties of the lists or libraries, as if everything was locked. I
tried on the main site collection and same thing happens, and I have tried with several user with Total Control permissions. I have also verified that the site collection was not in ReadOnly mode.
I have restored a site collection from SharePoint 2007 and have migrated successfully to 2010. Before applying visual upgrade I found that the content is also locked. It is as if he had changed anything in the configuration of the whole farm, but I can not
find what. The Event Viewer of the three server shows no errors related to this. The SharePoint LOGS not show anything unusual.
I do not know where to look and urges me to find a solution because the old servers must be out of service soon. I accept any suggestions.
Kind regards.

Finally I answer myself because I've already found and fixed the problem. Before moving the servers in farm to the another network I've unplugged the single SharePoint server from the farm database for to clone it. Apparently
this disconnection removes all the implemented solutions and the farm remains without servers. Reconnecting the servers not re-implements the solutions. When I was about to create a new farm I have seen that all solutions were not implemented,
I have implemented one by one and the system worked again.
If any of you happen reaches you, now you know what it may be due.
Kind regards!! Now I'm a happy man! ;)

Move library and folder from SharePoint 2007 to SharePoint 2010?

Hi, I want to move two libraries from SharePoint 2007 to SharePoint 2010
And also there is one folder (in another third library) want to SharePoint 2007 to SharePoint 2010 library.
Can I use Export command for library in SharePoint 2007 and Import in SharePoint 2010?
And how to move folders?

Hi Prakash,
You can use third party tools like Metalogix which free for up to 25 GB data
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/4347677b-b232-428b-a6cf-8d43034fa353/move-files-and-folders-from-sharepoint-2007-to-sharepoint-2010-with-same-attributes?forum=sharepointadminprevious
If you donot to keep the metadata then you can use windows explorer
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/b0569a5f-dd30-45a1-87d9-ee1eb28f258d/migratemove-document-library-from-sharepoint-2007-to-sharepoint-2010?forum=sharepointadminprevious
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Sharepoint 2007 - Creating a form to capture timesheets data, but need to track updates to previously submitted data

Hi,
We are using a basic version of Sharepoint 2007 and do not have access to InfoPath. I have created a list to allow team members to submit their weekly time on specific activities. How do I go about tracking any changes to previously submitted data?
For instance, a team member enters 5 hours for Activity 1 and submits on April 1. on April 10 they realize they submitted too few hours and want to go in to edit the 5 hours to 12 hours.
From a reporting perspective we already pulled a report (export to excel) and have the 5 hours listed for April 1. If the user goes in to edit their time sheet from April 1, we don't want the data to just override the 5 hours, we want some sort of flag to
show the hours went from 5 to 12 hours. How do we do this?
As a work around, I added a question at the beginning of the survey/list asking is this a new submission or an edit. I thought if they select edit and were taken to a screen that allowed them to select the date (April 1), the activity and the new hours that
I would have all of the previous data plus these 3 columns with the additional data: "Edit", "Activity 1", "12". Instead the original data was over written and all I show are blanks for the previous questions and the edited
info ("Edit", "Activity 1", "12").
What suggestions do you have so that I can maintain the integrity of the original data and flag for my Project Manager which data needs to be changed in previous reports.
Thanks in advance!
AA

I think the best way to answer your question would be to create a simple form and try various submissions. Be aware that unless the e-mail system is controlled, e-mail submission is not recommended due to client configuration issues of e-mail. Your question sounds like online submission would already be something you are comfortable with. In that case you can submit form data in 3 different ways: HTML, FDF, or XML. It can also be submitted as a PDF by saving the form, but that does not sound like what you need and also gets into issues of whether folks are using Reader or Acrobat.
Also be careful (or try both) about using forms from within Acrobat and the forms created by the link in Acrobat to Designer. Once you go to Designer with the form you can not come back for editing in Acrobat. Normally you would create the basic form in a word processor or layout tool and then add the form fields in Acrobat (or Designer if that is preferred).
I will let others address the anonymous and yet confirmation check issue.

SharePoint 2013 and Native Mode SSRS Web Parts

SharePoint 2013 and SQL Server 2012 installation. Trying to get the SSRS native mode web parts installed as per these instructions:
http://msdn.microsoft.com/en-us/library/ms159772.aspx
Have tried both via PowerShell and stsadm. In both cases, get an error regarding "Failed to extract the cab file in the solution". Have done this a bunch of times in SharePoint 2007 and 2010, is this solution no longer supported in
2013 and if so, is there a supported way of integrating with SSRS in Native Mode for SharePoint 2013?

OK, let me amend my statement a bit.
Found this article: http:// social.msdn.microsoft.com /Forums/sqlserver/en-US/5b9de028-5b6a-47c7-8da8-793d1a78df55/error-with-sql-server-2012-rswebpartscab-for-sharepoint-2010
Mind you, I was able to get the SQL Server 2012 version of RSWebParts.cab to install successfully on the SharePoint 2010 dev box in the environment, but figured that trying the SQL Server 2008 R2 version of RSWebParts.cab was worth a shot. It worked
(or at least it installed and I am able to add the web parts to pages). Will post an update once I am able to test full web part functionality with an SSRS Native Mode server.
So, what I can say from my testing:
SQL Server 2012 version of RSWebParts.cab works (installs) for a SharePoint 2010 installation but not for a SharePoint 2013 installation.
SQL Server 2008 R2 version of RSWebParts.cab works (installs) for a SharePoint 2010 installation and for a SharePoint 2013 installation.
There is no update to RSWebParts.cab in SQL Server 2012 SP1 (at all, not in any part of it including the Reporting Services Add-In), the file is always 10/20/2012.
So, as long as you are trying to integrate a SQL Server 2008 R2 SSRS Native Mode instance or lower on your SharePoint 2013 farm, there is a solution. However, it will likely not work against a SQL Server 2012 SSRS Native Mode installation.
So, the amended statement is that:
"The bottom line is that it *appears* that there currently is no supported version of the Native Mode (2.0) version web parts for SQL Server Reporting Services2012
(RSWebParts.cab) for SharePoint 2013. Therefore, there is currently no way to integrate SharePoint 2013 with a SQL Server Reporting Services
2012 instance running in native mode."
And, no, none of this really makes any sense in the least but that is what my testing shows.

Sharepoint 2007 as Content repository for KM

Hello
Any one know if it is possible to define Sharepoint as repository for KM (EP7 SP10)?
TNX
Erez

Hi Erez,
I am not sure about the interoperability between Sharepoint 2007 and EP7 SP10. But there is a document about the interoperability of older versions. Find it <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e891378-0601-0010-5386-a3387f1b161b">here</a>.
Basically, SAP Knowledge Management can be used as a WebDAV server or a WebDAV client. In a scenario as a WebDAV client, SAP KM provides an access to documents stored on other WebDAV-enabled servers. For this purpose, you use the WebDAV repository
manager.
The setting up the access to documents in SharePoint Document Libraries does not dif-
fer from the default procedure and comprises following steps:
     Define an HTTP system in the CM system landscape.
     Create a cache for the WebDAV repository manager.
     Configure the repository manager parameters for the WebDAV repository man-
        ager.
That should still work for the new versions of Sharepoint and EP.
Hope I could help!
Best regards,
Martin

SharePoint 2007 no check in prompt while exiting word

Hi,
I am using SharePoint 2007 and office 2007 professional plus. I am facing issue in the following scenario:
1. Created a document library with custom content types for Word.
2. I am able to create a new document using the template.
3. When I click on the document library, there is a prompt to check out the document in the drafts folder.
4. When I modify the document and click on X (close) then I am prompted to save the document. After I click "Yes" the document does not prompt for any check in.
5. In the library the document shows as checked out and I am able to check in from the document context menu.
This scenario (check in prompt) works fine when the library does not use any word content type. Also this issue is with Office 2007 and 2010 suite. I have tested with Office 2013 and I get the check in prompt on the same library which is configured to use
"Word" content type and template.
Please advise any suggestions to fix this issue.
Also in the document library the option "Require documents to be checked out before they can be edited? " is set as YES and Word uses the local drafts folder to save documents for offline editing

Go to library settings, versioning settings, check the box to require check out. It is disabled by default.
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com

Cannot Access Custom Workflow Process List (SharePoint 2007)

Does anyone know how to access the "Custom Workflow Process" list when using custom form actions in SharePoint 2007?
There are quite a few items in this list and I need to reduce the list item size.
Thank you for checking!

Did you try below script
social.technet.microsoft.com/wiki/contents/articles/powershell-script-to-list-out-webparts-used-in-publishing-pages-in-sharepoint-2007-and-sharepoint-2010-sites.aspx
param([switch]$help)
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Publishing")
function GetHelp() {
$HelpText = @"
DESCRIPTION:
This script will list out the webparts type along with the names in publishing pages in any site .
$HelpText
function RahulPublishingPageWebParts() {
write-host "This script will enlist the webparts used in all publishing pages in this site"
write-host "Please enter theURL of the site"
$siteURL = read-host
$site = New-Object Microsoft.SharePoint.SPSite($siteURL)
$web = $site.OpenWeb()
$webPublish = [Microsoft.SharePoint.Publishing.PublishingWeb]::GetPublishingWeb($web)
$pages = $webPublish.GetPublishingPages()
foreach($page in $pages)
$manager = $web.GetLimitedWebPartManager($page.Url,[System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webCollection = $manager.WebParts
if($webCollection.Count -ne 0)
write-host "The page " $page.Title " contains these webparts"
for($i =0;$i -lt $webCollection.Count; $i++)
write-host ($i + 1).ToString() " " $webCollection[$i].GetType().Name " " $webCollection[$i].Title
$site.Dispose()
$web.Dispose()
if($help)
GetHelp; Continue
else
RahulPublishingPageWebParts
If this helped you resolve your issue, please mark it Answered

Post migration Nintex workflow isse (sharepoint 2007 to Sharepoint 2010)

SharePoint2010
Conversation Options
SG
SARAVANAN GAJENDRAN
SARAVANAN GAJENDRAN
To
SharePoint2010 Hi ,
I have migrated Nintex workflow from shrepoint 2007 to sharepoint 2010 after migration one of the workflow is not working .
I am getting the below error .please advise on this .
Tried to export the perticular workflow from sharepoint 2007 and imported in sharepoint 2010 .
Workflow Messages
Time Event Message Outcome
3/2/2015 7:33 AM Workflow Comment Document Creation (v1.60)
3/2/2015 7:33 AM Workflow Comment Error checking in item. The workflow failed because the action requires the document to be checked out. Error
3/2/2015 7:33 AM Error An error has occurred in Document Creation 1.
Please advise on this
sarav

Hi Sarav,
From the error message, it seems that it needs to check out the document first to make the workflow to be executed.
I recommend to check if “Require documents to be checked out before they can be edited” is set to Yes in the Versioning settings of the library where the workflow associated.
If yes, please set it to No and then run the workflow to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Unable to edit document from SharePoint 2007 using Office 2013 and IE 11

I am getting the following error when I try to edit a document from SharePoint 2007: "Edit document
requires a Windows Sharepoint services-compatible application and Microsoft Internet Explorer 6.0 or greater". I am using Windows 7 with Office 2013 and Internet Explorer 11. Troubleshooting steps that I've tried so far (that haven't worked) are as follows:
1) repaired Office; 2) switched from 64 bit version of IE to 32 bit version; 3) moved the owssupp.dll from C:\Program Files (x86)\Microsoft Office\Office14\ to C:\Program Files (x86)\Microsoft Office\Office15; 4) tried removing old versions of Office (but
I still need to use Office Communicator 2007 r2 and couldn't figure out how to get rid of the Office14 files from Program Files); and 5) running SharePoint in IE compatibility mode. Please advise...thanks!

Hi,
It seems you installed mixed version Office2007/2010/2013 on your client machine?
I would suggest you remove all Office 2007 and 2010 version, and reinstall Office 2013(include Office Tools->Microsoft SharePoint Foundation Support component) on your machine, and make sure "Open SharePointDocuments class" add-on is enabled
from IE11, then check if it could fix the issue.
If above works, please test again after installing the Office Communicator 2007 r2 on your machine.
http://social.microsoft.com/Forums/en-US/3e8c0976-2794-49a2-92fe-6a254b3cc4ca/a-microsoft-sharepoint-foundation-compatible-application-could-not-be-found?forum=projserv2010setup
http://blogs.technet.com/b/emeaoffice/archive/2013/04/29/you-get-an-error-message-when-you-open-an-office-file-from-sharepoint-on-a-computer-on-which-you-installed-more-than-one-version-of-office.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013
Saidireddy

Hi
your little question, could have a big big answer, or answers ;)
To complete your question, ai will try
Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013 and Office 365
Isn't a simply an unique answer and deppends on your need , business needs, and you infrastructure. Depends also which type ( Foundation ( which is free ), Standard/ Enterprise )
Depends on you to read, learn and ask , punctually about one issue/problem/request
I recommend you to bing the net
http://www.bing.com/search?q=sharepoint+2007+vs+2010+vs+2013&pc=MOZI&form=MOZSBR
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Sharepoint 2007 and BO Edge 3.0

Similar Messages

Maybe you are looking for