Shift Report with Long Text

how do i get a shift report out of the PLM (plant maintenance) module that includes the following:
Work Order Number
Person Responsible
Time and date
Equipment
Hours Confirmed
Goods Movement
Long Text Description of what was done to correct the problem.
IW40 displays all the necessary fields that we are looking for with the exception of the long text description.
Thank you
Nikhil

Hi ,
I found an enhacement spot ES_RIAUFK10 - ECC6.0 ,EHP3 ,SE18 for IW40 programme , check the possibility to add a field via this one ..
For longtext u need to read from STXH Table using FM READ_TEXT
regrds
pushpa

Similar Messages

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Loaded data is not yet visible in Reporting (see long text) Message no. RSM

Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
Naveen

Hi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen

Loaded data is not yet visible in Reporting (see long text)

hello
all
I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D( 23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
as I solve this problem ?

Jurado,
What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
Probably if you look closely you would know the answer.
Goodluck,
Alex
(Arthur Samson)

Problem with long text

Hi folks,
iam uploading longtext in transaction KP06 in bdc programing using create_text.
now my problem is if i pass selection criteria
case 1:
Vertion : N0
fiscal year : 2007
planner profile: CCPLAN4
then the budeget plan data uploading successfully along with long text.
case2: Vertion : N1
in this case also everthing wrking fine
case3: Vertion : 001
in this case budgetplan data uploading sucessfully but longtext is not uploading,
i debbug the proragm , create_text also returning sy-subrc = 0. but if i check in KP06 the long text is not there.
data declaration
vertion : VERSN type C(3)
can u tell me the problem is in logic or with FM ?
note : i checked with save_text also.
regards
neeru

HI Naimesh,
the FM Create_text internally contains both FMs save_text and commit_text,
even i debug the FM in case of vertion N1, N0 and 001,
all the cases sy-subrc = 0.
code:
CLEAR G_OBJNR.
LOOP AT RECORD.
COST = RECORD-BDC01.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = COST
    IMPORTING
      output = COST.
    CONCATENATE 'KS' p_kokrs record-bdc00 INTO g_objnr.
        SELECT SINGLE * FROM COSP WHERE OBJNR = g_objnr
                          AND GJAHR = P_GJAHR
                          AND VERSN = p_ver
                          AND KSTAR = COST.
IF SY-SUBRC = 0.
      LEDNR = COSP-LEDNR.
      OBJNR = COSP-OBJNR.
      GJAHR = COSP-GJAHR.
      WRTTP = COSP-WRTTP.
      VERSN = COSP-VERSN.
      KSTAR = COSP-KSTAR.
      HRKFT = COSP-HRKFT.
      VRGNG = COSP-VRGNG.
      VBUND = COSP-VBUND.
      PARGB = COSP-PARGB.
      BEKNZ = COSP-BEKNZ.
      TWAER = COSP-TWAER.
CONCATENATE LEDNR OBJNR INTO OBJNR.
CONCATENATE OBJNR GJAHR INTO TNAME1 separated BY SPACE10.
CONCATENATE TNAME1 WRTTP VERSN INTO TNAME2.
CONCATENATE TNAME2 KSTAR INTO TNAME3 separated BY SPACE.
CONCATENATE TNAME3 VRGNG INTO TNAME4 separated BY SPACE4.
CONCATENATE TNAME4 BEKNZ INTO TNAME5 separated BY SPACE10.
CONCATENATE TNAME5 TWAER INTO TNAME.
I_THEAD-TDOBJECT = 'CCSS'.
I_THEAD-TDID = 'COSP'.
I_THEAD-TDNAME = TNAME.
I_THEAD-TDSPRAS = 'E'.
APPEND I_THEAD.
i_tline-tdformat = '*'.
I_TLINE-TDLINE = RECORD-LONGTEXT.
APPEND I_TLINE.
loop at i_thead.
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
    FID               = I_THEAD-TDID
    FLANGUAGE         = I_THEAD-TDSPRAS
    FNAME             = I_THEAD-TDNAME
    FOBJECT           = I_THEAD-TDOBJECT
SAVE_DIRECT       = 'X'
FFORMAT           = '*'
TABLES
    FLINES            = i_tline
EXCEPTIONS
NO_INIT           = 1
NO_SAVE           = 2
OTHERS            = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CLEAR I_TLINE.
REFRESH I_TLINE.
CLEAR I_THEAD.
REFRESH I_THEAD.
SELECT SINGLE * from cokp into itab WHERE OBJNR = g_objnr
                          AND GJAHR = P_GJAHR
                          AND VERSN = p_ver
                          AND KSTAR = COST.
if sy-subrc = 0.
   itab-TXFLG = 'X'.
   append itab.
   write:/ 'Text saved for', record-bdc00 , record-bdc01.
   else.
      write:/ 'Text saved for', record-bdc00 , record-bdc01.
      ENDIF.
ENDIF.
my program wrking fine but the long text is not visible for vertion 001.
regards
niru

NI report with Cyrillic text

Hi all,
I need to produce a pdf report with Russian text.
As you can see in the code, I using the "NIReport_SetTextAttribute"command for transliterate the charset to russian.
if I set the system language to Russian I can type Russian characters in to pdf, there is no error.
But when I change the system language ( exp:to English),there is not any characters in to pdf.
How can I solve this problem?
Attachments:
result_pdf.png ‏34 KB
code.png ‏51 KB

Hello Basil and Humphrey;
I will try to explain the problem. Let's go over a CVI example, so you can reproduce it on your own.
In the NI report example (nirsample.cws) shipped with CVI installation, an attribute called NIR_TEXT_ATTR_FONT_CHARSET is used.
In one case, it is changed to "NIRConst_CharsetSymbol".
As a result of this symbol charset setting, if you type "qwerty" as a string in your code, it is displayed as 6 different symbols side-by-side in the resultant PDF report file (we print the file to a PDF printer not on paper).
This means, the report toolbox gets the character codes representing the letters "q,w,e,r,t,y" and prints corresponding symbols instead whose character codes match those latin letters. To obtain this result, you do not need to change any computer setting (system locale, CVI editor font charset, etc).
So we thought, if we type some the same "qwerty" string and then select the Russian charset instead of symbol we would see corresponding characters from the Russian alphabet. But that is not the case.
The only way to print Russian into NI report is to change the system locale (Control panel > Regional Options > Default language for non-unicode programs) to Russian. In that case, we can print Russian characters in the code as strings.
(we also set the keyboard input language to Russian, but that is not a must, you can type Russian using combinations like ALT + 0215 once the locale is Russian and still get the same result)
After this locale setting, the created PDF displays Russian characters even if the NIR_TEXT_ATTR_FONT_CHARSET attribute is not NIRConst_CharsetRussian.
It look like the font charset attribute is not fully implemented. It works for symbol charset but not for Russian.
So the questions are:
- Is this expected behaviour?
- Why symbol charset behaves different then Russian for instance?
- What is your suggested method for printing Russian text in pdf reports?
Thank you.
S. Eren BALCI
www.aselsan.com.tr

Word report with Cyrillic text

Hi all,
I've never used one of these forums before so hope I'm doing right.
I need to produce a word report with Russian & English text , if I set the system language to Russian I can type Russian characters in to word, but if I have a string constant in labview which I insert into a table in word the text from string constant changes.
Thanks for any help anyone can give.

Hi Mike
Thanks for the reply.
The document that I will be working on hasn't been translated yet, so I took the string constant from UM_confirm Exit.vi http://digital.ni.com/public.nsf/allkb/24D845629A22AB6A86257473005ECF35?OpenDocument and wrote a small vi (see attachment) to see if I could put the Russian string constant into a table in word I separated the Russian & English strings and entered them into different cells in a word table. The Russian characters no longer look like Russian characters (see attachment 2). If I set the system language to Russian on the language bar I can Type Russian characters into word.
Regards
John B
Attachments:
Russian doc.doc ‏1 KB
russian report vi.JPG ‏36 KB

Report Painter Long Text Display and fiscal year

Hi Gurus'
Could you pls let me know, how do I get Long text in the report. Usually we get medium text.
And in the selection screen if i have like:
Company code
Fiscal year
Period
How do I get the text along with the Fiscal year.
Like Revenue 2008
Regards,
SK

Hi,
For displaying long text in rows or column,
go to menu bar>Formatting>Rows/column texts. Under this tab, you can select shot, medium, long as required for both rows and columns.
Further, to display fiscal year along with text in column, you must have asisgned variable for fiscal year in column. Go to text of the column and mention &variable of fiscal year assigned for the column after the text.
Reward points if useful.
Regards,
Harish

Upload Material master with long text using LSMW

Hello,
i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2, purchasing, purchase order text, plant data 1,2.
i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
please help.

ca u clarify how can i do it.
suppos i have longtext "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is 10 RMT. A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire. F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
then what i have to do changes in lsmw.?

Simple Abap PO report with Item text

Hello Abap,
Need some help as am more on functional side and our abaper is 2months holiday.
Need to develop simple reports with the following information.
EKKO-EBELEN,
EKKO-WAERS,
EKPO-EBELP
EKPO-TXZ01
EKPO-MENGE
EKPO-NETPR
EKPO-NETWR
ITEM TEXT (TEXT ID-F01) - 100char to be printed.
Tried to developed from scratch but no luck. Need it asap. Thanks in advance.

Hi,
I don't have test data but I think the following code will give you an idea, try to fill in the FM "READ_TEXT" below with your own parameter (check with table STXH).
REPORT ZTEST.
TYPES: BEGIN OF TY_RESULT,
   EBELN TYPE EKKO-EBELN,
   WAERS TYPE EKKO-WAERS,
   EBELP TYPE EKPO-EBELP,
   TXZ01 TYPE EKPO-TXZ01,
   MENGE TYPE EKPO-MENGE,
   NETPR TYPE EKPO-NETPR,
   NETWR TYPE EKPO-NETWR,
   ITEM_TEXT TYPE CHAR100,
   END OF TY_RESULT.
DATA: GT_EKPO TYPE STANDARD TABLE OF EKPO,
       GS_EKPO TYPE EKPO,
       GT_EKKO TYPE STANDARD TABLE OF EKKO,
       GS_EKKO TYPE EKKO,
       GT_RESULT TYPE STANDARD TABLE OF TY_RESULT,
       GS_RESULT TYPE TY_RESULT,
       LV_TAB_IND TYPE SY-TABIX,
       GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       GS_FIELDCAT TYPE LINE OF SLIS_T_FIELDCAT_ALV,
       GV_NAME TYPE CHAR70,
       GS_TLINE TYPE TLINE,
       GT_TLINE TYPE STANDARD TABLE OF TLINE.
SELECT-OPTIONS: SO_EBELN FOR GS_EKKO-EBELN,
                 SO_WAERS FOR GS_EKKO-WAERS.
START-OF-SELECTION.
   PERFORM SELECTION.
   PERFORM BUILD_FIELDCAT.
   PERFORM DISPLAY.
*&      Form SELECTION
*       text
FORM SELECTION.
   SELECT EBELN WAERS FROM EKKO INTO CORRESPONDING FIELDS OF TABLE GT_EKKO
     WHERE EBELN IN SO_EBELN
     AND WAERS IN SO_WAERS.
   IF GT_EKKO[] IS NOT INITIAL.
     SELECT EBELN EBELP TXZ01 MENGE NETPR NETWR FROM EKPO INTO CORRESPONDING FIELDS OF TABLE GT_EKPO
       FOR ALL ENTRIES IN GT_EKKO
       WHERE EBELN EQ GT_EKKO-EBELN.
     SORT GT_EKPO BY EBELN.
   ENDIF.
   LOOP AT GT_EKKO INTO GS_EKKO.
     CLEAR GS_RESULT.
     CLEAR LV_TAB_IND.
     MOVE-CORRESPONDING GS_EKKO TO GS_RESULT.
     READ TABLE GT_EKPO TRANSPORTING NO FIELDS WITH KEY EBELN = GS_EKKO-EBELN BINARY SEARCH.
     IF SY-SUBRC EQ 0.
       LV_TAB_IND = SY-TABIX.
       LOOP AT GT_EKPO INTO GS_EKPO FROM LV_TAB_IND.
         IF GS_EKKO-EBELN NE GS_EKPO-EBELN.
           EXIT.
         ENDIF.
         MOVE-CORRESPONDING GS_EKPO TO GS_RESULT.
         CONCATENATE GS_RESULT-EBELN GS_RESULT-EBELP INTO GV_NAME.
         CONDENSE GV_NAME NO-GAPS.
         CALL FUNCTION 'READ_TEXT'
           EXPORTING
             CLIENT         = SY-MANDT
             ID             = 'F01'
             LANGUAGE       = SY-LANGU
             NAME           = GV_NAME
             OBJECT         = 'TEXT'
           TABLES
             LINES          = GT_TLINE
           EXCEPTIONS
             NOT_FOUND      = 1.
         LOOP AT GT_TLINE INTO GS_TLINE.
           IF SY-TABIX EQ 1.
             GS_RESULT-ITEM_TEXT = GS_TLINE-TDLINE.
           ELSE.
             CONCATENATE GS_RESULT-ITEM_TEXT GS_TLINE-TDLINE INTO GS_RESULT-ITEM_TEXT.
           ENDIF.
         ENDLOOP.
         APPEND GS_RESULT TO GT_RESULT.
       ENDLOOP.
     ENDIF.
   ENDLOOP.
ENDFORM.                    "SELECTION
*&      Form BUILD_FIELDCAT
*       text
FORM BUILD_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 1.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'EBELN'.
   GS_FIELDCAT-SELTEXT_L       = 'Purchasing Document Number'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 2.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'WAERS'.
   GS_FIELDCAT-SELTEXT_L       = 'Currency Key'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 3.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'EBELP'.
   GS_FIELDCAT-SELTEXT_L       = 'Item No'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 4.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'TXZ01'.
   GS_FIELDCAT-SELTEXT_L       = 'Short Text'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 5.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'MENGE'.
   GS_FIELDCAT-SELTEXT_L       = 'Purchase Order Quantity'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 6.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'NETPR'.
   GS_FIELDCAT-SELTEXT_L       = 'Net Price'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 7.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'NETWR'.
   GS_FIELDCAT-SELTEXT_L       = 'Net Order Value'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
   CLEAR GS_FIELDCAT.
   GS_FIELDCAT-COL_POS         = 8.
   GS_FIELDCAT-TABNAME         = 'GT_RESULT'.
   GS_FIELDCAT-FIELDNAME       = 'ITEM_TEXT'.
   GS_FIELDCAT-SELTEXT_L       = 'Item Text'.
   APPEND GS_FIELDCAT TO GT_FIELDCAT.
ENDFORM.                    "BUILD_FIELDCAT
*&      Form DISPLAY
*       text
FORM DISPLAY.
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
       I_CALLBACK_PROGRAM      = SY-REPID
       IT_FIELDCAT             = GT_FIELDCAT[]
     TABLES
       T_OUTTAB                = GT_RESULT
     EXCEPTIONS
       PROGRAM_ERROR           = 1
       OTHERS                  = 2.
   IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
ENDFORM.                    "DISPLAY
Thanks.
Regards,
Keng Haw

Report CATS_DA, long text

Hi.
If I run report CATS_DA and someone have filled in something in the long text, there is a little pen and paper there.
If I then would like to save this to an excel sheet, the long text will not follow. I can understand why, because there can be a very very long text.
But if I would like to write my own report to get this long text out of the system, from which table, cluster or what ever, can I find the text.
I found table STXL but it only point to a cluster line.
Anyone having any idea?
Thanks // Peter B

Do obtain text from table STXL you can use FM: READ_TEXT.
Get the entry from STXL that you are requiring and get the text using this FM.
thanks.
JB

How do I print my form with long text ?

I created a form in Adobe Acrobat 9 with fillable text fields. Some of our users need to print the form after completion, and my form is creating scoll bars to read text that is long and extends beyond the text box. How do I modify the form where all text will print? Does the text box just have to be larger or is there a feature I can change on the original document to enable this? I read in another post that it can be fixed in Acrobat but it did not say how to fix.

Beside the options pointed out by George, there's another option: to copy the text from the original fields to fields that are located on otherwise blank pages at the end of the document. So the original field will say (in the printed copy only!) something like "See the last page" and on the last page of the document you will have the full text from the original field.
This can be achieved using a custom-made script that is embedded in the file and executes just before the file is printed.
If you're interested in more information, you can contact me at try6767 at gmail dot com.

How to make single column scrollable in ALV report (for long Text)

I have a 20 columns which we need to display in ALV grid, including one column for long text. In long text column currently it showing 40 character. I tried to change output length of field catalog but it's not working.
Can any one help me ....
Thanks
Guru
Message was edited by:
gurusharan mandal

hi,
pls remeove if u give like this in the layout.
gd_layout-colwidth_optimize = 'X'.
rgds
Anver

Report with long column cell value

Hi,
we have report with some number of columns and some columns cells have value with a lot of chars (more than 100). We would like to trim this column cell value to for example 20 chars and put all chars of column cell value to HTML TD title value as "hint". Something like this:
<code>
<td #ALIGNMENT# headers="#COLUMN_HEADER_NAME#" title="#FULL_COLUMN_VALUE#" class="data">#TRIMED_COLUMN_VALUE#</td>
</code>
It is possible do this by template? Do you have any idea?
I have one idea that use JavaScript and full column value in hidden column, but I thing that there could be some better way to do this:-)
With regards.
David
Edited by: user4893970 on Nov 23, 2010 4:11 PM

While I don't think there's any way to do this with a normal reportIf it is a standard report and not an interactive report, then it can be done using the column HTML Expression:
<span title="#FULL_COLUMN_VALUE#">#TRIMMED_COLUMN_VALUE#</span>

CPI-C calling a report with long report name

Hi there,
we are communicating to a SAP System with CPI-C.
My question:
How can I call a report with CPI-C which has a name with more than 8 characters?
(I am using SAP_CMLOGON2 of CPI-C SDK for C++)
I want to use namespaces and 8 Characters are too short for this.
Any Ideas?
Thx,
Andi

Hi Scott,
According to your description, you want to call the report which contains subreports in asp.net.
Based on my research, when we call the report which contains subreports in asp.net, we should attach a handler to the SubReportProcessing event of the report. For more information, please refer to the similar thread: Running
Reports SubReports and parameters from Asp.net. Besides, you could also refer to this
article to render the main report and sub report in ReportViewer control.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Shift Report with Long Text

Similar Messages

Maybe you are looking for