Shipping and A/R report comparision

Hi All,
           I have a scenario where I need to compare 2 customized reports ( shipping and A/R report) each day . I need to make sure that both the billing quantity and amount are compared on both these reports and if there is a discrepency on either of these fields, a email notification should be sent to the customer every day .
Any idea on how this can be done .
Note : Both  the reports are run manually and doesn't have a batch job scheduled.
Thanks
Sridhar
Edited by: Sridhar Ganesh on Jan 9, 2009 10:55 PM

Dear sridhar,
it's possible by development program,
see first just create varriant for both the report , scedule on daily basis, & by program call this both the program to third program & then compare data & if diff then send email
regards,
amit

Similar Messages

  • Standard reports available in Shipping and Transportation

    Hello,
    Could you please list all the available standard reports in shipping and transportation.
    All the apt answers r rewarded.....
    Regards,
    Pavan P.

    Dear pavan
    1)  Shipping
    VL04     Process Delivery Due List
    V_SA     Collective Proc. Analysis (Deliv.)
    VL10     Edit User-specific Delivery List
    V_UC     Incomplete SD Documents
    VL22     Display Delivery Change Documents
    VL37     Wave Pick Monitor
    VL38     Groups Created: Wave Picks
    VL06     Delivery Monitor
    VL06F     General delivery list - Outb.deliv.
    VL06O     Outbound Delivery Monitor
    VL06I     Inbound Delivery Monitor
    VL06C     List Outbound Dlvs for Confirmation
    VL06P     List of Outbound Dlvs for Picking
    VL06L     Outbound Deliveries to be Loaded
    VL06T     List Outbound Dlvs (Trans. Planning)
    VL06G     List of Oubound Dlvs for Goods Issue
    VL23     Goods Issue (Background Processing)
    VL06IC     Confirmation of putaway inb. deliv.
    VL06IP     Inbound deliveries for putaway
    VL06IG     Inbound deliveries for goods receipt
    VL06IF     Selection inbound deliveries
    VL70     Output From Picking Lists
    VL71     Output from Outbound Deliveries
    VL72     Output from Groups of Deliveries
    VL74     Output from Handling Units
    VL13     Create Deliveries in Dec.Shipping
    VL73     Confirmation of Decentr.Deliveries
    2)  Transportation
    VT11     Select Shipments: Materials Planning
    VT12     Select Shipments: Transpt Processing
    VT14     Select Shipments: Utilization
    VT15     Select Shipments: Free Capacity
    VT16     Select Shipments: Check In
    VT22     Display Change-Document Shipment
    VT70     Output for Shipments
    VI11     List shipment costs: Calculation
    VI12     List shipment costs: Settlement
    thanks
    G. Lakshmipathi

  • Shipping and delivery status from R/3 to CRM

    Hi all,
    we are creating sales orders in CRM and replicating it to R/3. CRM is the owner of the document.
    Now whenever changes are done to sales order in CRM, the changes are replicated to R/3.
    Let's say the shipping status is updated in R/3. Now the requirement is the changes need to be replicated
    back to CRM.
    I can use the scenario X + Y or X alone. But with X or X + y scenario Once I make changes in R/3 then the
    document owner changes to R/3.  this means any further changes in CRM will not be replicated back to R/3.
    I require all changes from CRM to be replicated to R/3, but from R/3 I require the shipping and delivery status to be replicated back to CRM. How could this be achieved.
    It would be great if you could share the experiences.
    Thanks
    Jothi.

    Hi all,
    I have a similar requirement. Can you please tell me how to go with it?
    The requirement is to send the user status from CRM (where the request is generated) to R3 (where the material is processed).
    The user status of the return order in CRM should be sent real-time to R3. Any updates to the user status in CRM should result in a corresponding change in the user status in R3.  Any updates to the user status in R3 should trigger a corresponding change to the user status in CRM.  All user statuses must be available in BI/BW for reporting and analytical requirements.
    <b>From R3 to CRM</b> – Standard R3-CRM middleware exchanges information between the two systems any time a transaction is created or changed.  At this point the order information is exchanged between the two systems depending on whether the item or the header level data is changed in R3. The development should be able to download the user status at the header & the line item level when the middleware brings down R3 sales transaction data to CRM. For the sake of simplicity the status profile in R3 and CRM will be defined exactly the same therefore we do not need a mapping table between the two systems. This information should also be exchanged in case the line item is deleted / cancelled / rejected.
    <b>The same from CRM to R/3.</b>
    <b>Processing restrictions :</b>
    This should not be transaction, item category or status profile specific so that as and when a new transaction type, item category or a status profile is added it should still be allowed to transfer between the two systems.
    Should be developed as an enhancement to the standard middleware data stream between R3 and CRM.
    Regards,
    Raju

  • Data mismatch with ECC FBL5N report and debtor ageing report(BI side)

    Hi,
    I am facing a data mismatch problem with FBl5N(t-code for customer line item report) report in ECC side and Debtor ageing report in BI side.
    The problem is
    1) there are mismatch of data with some customer amounts in both ECC and Bi side.
    2) and also there are customer Nos with amounts in BI Debtor ageing report which are not there in the ECC FBL5N(t-code for customer line item report)
    for the second problem, I checked in the Tables BSID,BSAD in ECC side ,there also these customer Nos are not available.
    One more strange thing is that with the same selectionin report on both ECC and BI reports the data mismatch and The extra customers in Bi reports are changing everyday, i.e. we are getting new set of data mismatch and extra customers Nos in BI Side.
    If anyone  have worked on this type of issue.....kindly help...
    Thanks in advance

    Hi,
    on the one hand it may be delta mechanism of FI_*_4 extractors with the timestamps issue, that your comparision between BI and ECC is at no time up to date.
    FI Extraction
    on the other hand, it may be the delta problem between data targets in your BI-System, in case you load the FI-Data from a DSO to a cube and make a report on the cube. I have this problem at the moment and will watch this thread for more suggestions.

  • Drop Ship and Consignment Warehouses.

    Hi Everyone;
    What is the main difference between a Drop Ship and a Consignment Warehouse. As per my understanding example for Drop Ship warehouse would be ebay, as if some company wants to sell it s products it will use ebay as a drop ship warehouse.
    Consignment warehouse only has a accounting effect when the products is sold. so example of consignment warehouse will be like Honda selling it s cars through it s dealers..so if a dealer in new york sold one Honda car only then it will have an accounting and warehouse effect in it s headquarters in Detroit and Ny.
    Please correct me if i am wrong as i always get confused in this. I am preparing for my B1 certification.
    Thanks and Regards
    Nitin

    Your understanding is correct.
    In addition to that, following is as per SAP Help Document
    Drop Ship
    Select to define the warehouse as a drop ship warehouse. Use when the company does not manage inventory, but receives commission for every order.
    Drop ship warehouses cannot be used for serial or batch items.
    Inventory Transfers as Customer Consignments
    If you deliver items to your customer in the form of a consignment, you can use this function to enter the inventory transfer from your warehouse to the consignment stores in the system.
    When items are withdrawn from the consignment stores at the customeru2019s site, you create an outgoing invoice for the appropriate quantity and specify that the items be delivered from the consignment stores.
    You have to create a storage location for the consignment to enable the consignment inventory to be managed separately from the rest of your item inventory.
    If you maintain consignment inventory for several customers, we advise creating a consignment store for each customer so that the inventory for each customer can be monitored more easily.
    You can then display the consignment inventory using the warehouse reports.

  • Export and Email disc report

    Hi Friends,
    We have two tier architector and we are using disc desktop and admin for reporting. I have one report which need to be executed, exported to excel and this exported excel file should be mailed to specific email id which can be hardcoded.
    This entire cycle should happen without manual intervention.
    Pankaj

    Hi Pankaj
    Not a problem at all. Just use Desktop's command line interface to run the report and export it in Excel format to a local drive. You use a third-party scheduling tool like the one that ships with XP to run the job at a specified time. Next you use a command line based emailing tool like Febooti (http://www.febooti.com) to pick up the file and send it.
    Best wishes
    Michael

  • Open and cancelled Quote Report

    Hi,
    Can anyone give me the information  for getting open and cancelled Quote Report?

    I hope you are using reason for rejection for cancelling quotations. If that is the case, you can use transaction VA25 to view the list of quotations. Here you can filter on two columns status and reason for rejection to view the report as per your requirement.
    Regards,
    GSL.

  • I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

    i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

    Well I'll guess you're using iPhoto 11:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Hi, i am trying to open and view a report that comes from another server with different odbc connection

    hi, i am trying to open and view a report that comes from another server with different odbc connection
    i created a crystal report for a mysql database on my machine and everything works great
    but we have other reports that come from other machines with different odbc connection
    and this its not working when opens the report asks for credentials
    and i cannot use the remote ip for these reports that come from other machine
    question
    if i cannot connect to remote ip to open the report
    for each report i have to create a database the report database on my machine and then open the report ?
    or there is some other way to open the report ?
    i am using visual studio 2013 and mysql and
       <add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
    thanks

    short
    i have a report that it was created on another server with a specific dsn
    now i am trying to open the report on my machine
    the database from the other server does not exist on my machine
    the server machine where the report was created the ip its not accessible
    question ?
    can i open the report on my machine or its impossible ?
    thanks

  • Logical AND in MDX Reporting Services Parameter

    Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
    (http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
    But I'm not sure how to apply this to a parameter's MDX dataset.
    Here is an example of the automatically generated MDX which uses logical OR:
    This is the drop down parameter:
    WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
    [Measures].[ParameterValue] AS
    [Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
    [Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
    SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
    [Measures].[ParameterLevel]} ON COLUMNS
    , [Department].[Department].ALLMEMBERS ON ROWS
    FROM [MyCube]
    And the demo report dataset is:
    SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
    NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
    DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
    ( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
    ON COLUMNS FROM [MyCube]) WHERE
    ( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
    STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
    CELL PROPERTIES VALUE,
    BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
    FONT_NAME, FONT_SIZE, FONT_FLAGS

    Hi,
    I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
    Example 1
    SELECT
    {x} ON COLUMNS,
    {ROWS_SET} ON ROWS
    FROM
    (SELECT StrToSet(@Param1) ON COLUMNS FROM
    (SELECT StrToSet(@Param2) ON COLUMNS FROM
    [CUBE_NAME]
    Or crossjoin between 2 parameters
    SELECT
    {x} ON COLUMNS,
    {ROWS_SET} ON ROWS
    FROM
    (SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
    [CUBE_NAME]
    Jiri
    Jiri Neoral

  • How can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

    how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

    If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.

  • HST6.0 Header and footer in reports

    Hi,
    We have an application generated from designer 1.3.2 using Headstart, and now we need to upgrade that one to designer 6.0, Everyting works ok with the forms but when we try to generate reports we don't get any header and footer. I have looked into the demo application in Headstart and found 2 reports with header and footer but I can't figure out how to generate this from Designer.
    Thanks in advance for any help!

    These fragments might fall under the category of "other", as an example, there is a copyright fragment in the Other tab of the fragment toolbox window. You could copy that and enhance it to make your footer.

  • Customer and Vendor ageing report by ItemGroup@%@#$%@#$??

    Hi All
    How do we get Customer and Vendor ageing report by "ItemGroup"?
    I know there is a standard report in Business One which gives you the ageing report by Business Partner Group.  But I dont know whether it is possible to get by "ItemGroup".  Please help me and excuse me for weird requirement..
    Thanks

    Hi Gordon,
    that query is actually designed for getting the purchase reports with all the excise and other tax related information per line item in the marketing document.   my requirement is something different than this where the client wants to see the ageing report by Itemgroup. 
    Since ageing is based on the invoice due date it looks difficult to bifurcate the each individual line item, its group, its line total and their due date.  means we should add all the open invoices' line items to be grouped with its total based on the due date.  any other way to solve this?
    thanks

  • Why does it stop every few seconds for "buffering" when I try to watch the Daily Show and the Colbert Report?!

    The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

    The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

  • Designing the consolidated and line item report for specific material

    Hi
    i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
    Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost)  ) in one report.
    Another report will give same for consolidated values of financial loss, utiliy consumption.
    <b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
    kumar

    0VENDOR_ATTR - Vendor Master Data Attributes
    0FI_AP_51 - Check Register Line Items
    0FI_AP_4 - Accounts Payable Line Items
    It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

Maybe you are looking for