ShObjIdl.h compile error when including Photoshop SDK header?

I develop photoshop plugins on both Mac 10.6 and Windows 7, now my code has been built and run successfully on Mac, but on Windows there are curious compile errors in a file "ShObjIdl.h", this is a Windows SDK header file. ( my VC++ version is 2010 ). It seems including some adobe SDK header file will cause the error. Is there someone who had met this? I guess some macro define conflicts.

Sophie
did your program work ok under 10.3.6? Is it just Tiger that gives the problem?
I have not used xmlrpc but I have used Pro*C on OS X with no probelms.
Where did the xmlrpc.h you are using come from? I could not find it on OS X on either Tiger or Panther. However I do find an xmlrpc.cp and a make file so I assume you would include a shared library from it in the make file for your program to be able to make the xmlrpc calls you need to.
In general, the include files are in sub directories of /System/Library/Frameworks and it would be worth a grep -r for the declarations you want to include and put the path in the include parameter to proc.
I hope this info helps.
Paul

Similar Messages

Getting Compilation error when used SET or MULTISET operator on nested tabl

Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.

Can any one suggest what went wrong here?Only if you would post the query and Oracle versions on both databases.
Besides, this forum deals with issues in Oracle product installation. So post this query in SQL PL/SQL forum for better response.

Compilation error when used SET or MULTISET operator on nested tables

Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.

Hi,
Thanks for ur reply...
Since MULTISET and SET operators are the new additions in base 10g release for manipulation of nested tables data, I am surprised that same is working in similar 5 DBs installations with 10.2.0.1.0 version, but does not work in the sixth.
SET and MULTISET operators are used inside the PL/SQL procedure which is getting compiled in the above mentioned 5 DBs but not in sixth DB.
it gives
On line: 3112
PLS-00306: wrong number or types of arguments in call to 'SET'
Hope this clarifies the issue...

Errors when installing Photoshop CS6

Errors when installing Photoshop CS6

I am having a similar issue trying to download PS via CC.
Mac OSX
Here are the details from the installation error:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DS001 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 13 error(s)
----------- Payload: Camera Profiles Installer 7.0.0.0 {539AEF15-3A2B-4A31-A587-7E90F7D9C700} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRawProfile7.0All/AdobeCameraRawProfile7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Player for Embedding 3.3 3.3.0.0 {2591B843-8028-4395-9DEE-03AF8D631539} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeAPE3.3-mul/AdobeAPE3.3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: PDF Settings CS5 10.0.0.0 {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe SwitchBoard 2.0 2.0.0.0 {4FFA83C0-007A-4DB3-955C-B5EEE73BEDAF} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/SwitchBoard2.0All/SwitchBoard2.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeCMaps CS6 4.0.0.0 {E8B1DAAA-0B6B-44E6-A2D3-8E418EA0EA85} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCMaps4-mul/AdobeCMaps4-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Suite Shared Configuration CS6 3.0.0.0 {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeSuiteSharedConfiguration3-mul/AdobeSuiteSharedConfiguration3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Utilities CS6 4.0.0.0 {4F427880-01EA-4E0F-AAE2-9ADE97563A21} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeUtilities4.0-mul/AdobeUtilities4.0-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe XMP Panels 4.0.0.0 {148542D8-49CA-482A-A334-1D54C5A9D53B} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeXMPPanelsAll/AdobeXMPPanelsAll.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobePDFL CS6 10.9.0.0 {557F9FD3-EED8-43D7-AF29-0F19CA832728} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFL10.9-mul/AdobePDFL10.9-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeTypeSupport CS6 11.0.0.0 {A0F72081-99FB-4FFA-AE1A-62B5A656CAC1} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeTypeSupport11-mul/AdobeTypeSupport11-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Photoshop Camera Raw 7 7.0.0.0 {CFC3110A-491C-4DBF-A97D-66C567600A2F} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRaw7.0All/AdobeCameraRaw7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Support 13.0.0.0 {1F955A4A-F365-4379-AEE2-B7C83E1AA883} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Support/AdobePhotoshop13-Support.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Driver 13.0.0.0 {74EB3499-8B95-4B5C-96EB-7B342F3FD0C6} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Driver/AdobePhotoshop13-Driver.dmg. Please verify that the disk image is not corrupt.

Compilation error when deploying EAR file on standalone OC4J...

Hi All,
I am getting the following error when trying to deploy an EAR File describing a web service from the Jdeveloper IDE to the stanalone OC4J server instance.
==========================================================
Uploading file JavaWebServiceEmp-GetDates-WS.ear ...
Application Deployer for JavaWebServiceEmp-GetDates-WS STARTS.
Copy the archive to C:\Lester\Testing\JDev10.1.3\oc4j\j2ee\home\applications\JavaWebServiceEmp-GetDates-WS.ear
Initialize C:\Lester\Testing\JDev10.1.3\oc4j\j2ee\home\applications\JavaWebServiceEmp-GetDates-WS.ear begins...
Unpacking JavaWebServiceEmp-GetDates-WS.ear
Done unpacking JavaWebServiceEmp-GetDates-WS.ear
Unpacking WebServices.war
Done unpacking WebServices.war
Initialize C:\Lester\Testing\JDev10.1.3\oc4j\j2ee\home\applications\JavaWebServiceEmp-GetDates-WS.ear ends...
Starting application : JavaWebServiceEmp-GetDates-WS
Initializing ClassLoader(s)
Initializing EJB container
Loading connector(s)
Starting up resource adapters
Initializing EJB sessions
Committing ClassLoader(s)
Initialize WebServices begins...
Initialize WebServices ends...
Started application : JavaWebServiceEmp-GetDates-WS
Binding web application(s) to site default-web-site begins...
Binding WebServices web-module for application JavaWebServiceEmp-GetDates-WS to site default-web-site under context root JavaWebServiceEmp-GetDates-context-root
Operation failed with error:
Error compiling :C:\Lester\Testing\JDev10.1.3\oc4j\j2ee\home\applications\JavaWebServiceEmp-GetDates-WS\WebServices: compilation error occurred
Deployment failed
Elapsed time for deployment: 1 minute, 50 seconds
==========================================================
Please could somebody help me out with this? Basically I am not able to understand how to deploy the EAR file created under the MyWork folder under jdeveloper\jdev to the applications folder of j2ee\home. I am new to both EAR deployment as well as web services and would like to get a good understanding of the working of a web service which includes SOAP components and the like.
Any help with regards to building and deploying a web service on standalone OC4J would be appreciated. Thanks a lot.

Initially I followed the following steps to start up OC4J:-
Settings :-
1) Jdeveloper is setup under C:\Lester\Testing as Jdev10.1.3 folder
2) I downloaded the extended oc4j zip folder and unzipped it under a new folder oc4j at the location C:\Lester\Testing\Jdev10.1.3
Steps followed to run oc4j and deploy application
1) Setup a standalone oc4j from the jdeveloper ide giving C:\Lester\Testing\Jdev10.1.3\oc4j as the root folder for oc4j.
2) While doing step 1 added password and deployed it. Changed server.xml under C:\Lester/Testing/JDev10.1.3/oc4j/j2ee/home/config
to include the following:-
<shared-library name="global.libraries" version="1.0" library-compatible="true">
<code-source path="C:\Lester/Testing/JDev10.1.3/oc4j/j2ee/home/applib"/>
</shared-library>
AND
<java-compiler name="javac" in-process="false" options="-J-Xmx1024m -encoding UTF8" bindir="C:\Jdeveloper\jdk" extdirs="C:\Jdeveloper/jdk" />
3) Opened a command prompt and went to the location C:\Lester\Testing\JDev10.1.3\oc4j\j2ee\home and ran the following command:-
--> java -jar oc4j.jar
4) Deployment: Then I deployed my primewebservice application from command prompt at C:\Lester\Smart Cylinder\Example code\prime\PrimeNumberService>
using:-
--> java -jar C:\Lester/Testing/JDev10.1.3/oc4j/j2ee/home/admin.jar ormi://172.20.13.164:8888 oc4jadmin welcome -deploy -file PrimeNumberService.ear -deploymentName DocStyleWebService
5) Web Binding: Then I bound my primewebservice application from command prompt at C:\Lester\Smart Cylinder\Example code\prime\PrimeNumberService>
using:-
--> java -jar C:\Lester/Testing/JDev10.1.3/oc4j/j2ee/home/admin.jar ormi://172.20.13.164:8888 oc4jadmin welcome -bindWebApp DocStyleWebService PrimeNumberService_web http-web-site /docws
6) Steps 4 and 5 went through without error.
7) However when trying to access the web service using the following link I get the standard HTTP 404 (Page not found) error:-
http://localhost:8888/docws/prime
This was before I tried deploying the web service through jdeveloper IDE.
I had tried the document web service given at the following link:-
http://www.oracle.com/technology/sample_code/tech/java/codesnippet/webservices/docservice/index.html
from the web services how to links
http://www.oracle.com/technology/sample_code/tech/java/codesnippet/webservices/index.html
Please could somebody help me out? Also periodically I recieve the ojc.exe not found error when trying to deploy an application using jdeveloper ide. There are two conflicting jdeveloper versions one comes with this exe and one without.
Message was edited by:
Lester N

Compiling Errors with latest air sdk

Not sure if any is having similar issues but here it is:
Using latest Apache Flex SDK (4.9.1) -- used the installer.
After that I overlayed the latest AIR SDK (did this three times to make sure I did right -- have done multiple times before)
Updated the application descriptor (with 3.7) and -swf-version=20 in compiler settings.
Now I am getting these errors when compiling (compiling completed 100% successfully before the upgrade).
Any suggestions or solutions would be greatly appreciated (note that I require the mx.controls.HTML class as well as the mx List and mx Canvas classes for very good reason).

Hi,
This article starts with how to overlay AIR SDK's over Flex. http://www.adobe.com/devnet/air/articles/ane-android-devices.html
Please try and update if this will work for you.
Regards,
Nimit

ERROR:HDLParsers:3370 Compile Error when compiling for NI-5640R

I'm trying to get a FFT Core working inside the NI-5640R FPGA. In my latest debugging step, I have received the following error when compiling:
Compiling vhdl file "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" in Library work.
Entity <bushold> compiled.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 142. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkMaxWidth.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 143. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkCounterWidth.
Has anybody seen this before? I am including my FPGA VI that is causing this error (FFT (FPGA).vi). I am also including my previous step in debugging the FFT that worked (FFTworking (FPGA).vi).
Attachments:
FFT (FPGA).vi ‏125 KB
FFTworking (FPGA).vi ‏119 KB

Hi,
The main cause of this error message is the large array size. You configured a 16-bit fixed-size array with 4096 element for a total array size of 65536 (16 * 4096). Array uses a lot of FPGA resource and the general recommendation to limit the use and size of array as much as possible on the FPGA VI. This VI will certainly overmap the FPGA resource because of the large array size.
Although this error message is not directly related to the array size, it has however been reported to R&D (#4G3COBJ0) for further investigation. A possible workaround would be to reduce the size of the array or use DMA FIFO to pass the data to the host.
Thanks for the feedback!
Tunde A.
LabVIEW FPGA

Compiler error when useing switch statements in an inner class

I have defined several constants in a class and want to use this constans also in an inner class.
All the constants are defined as private static final int.
All works fine except when useing the switch statement in the inner class. I get the compiler error ""constant expression required". If I change the definition from private static final to protected static final it works, but why?
What's the difference?
Look at an example:
public class Switchtest
   private static final int AA = 0;
   protected static final int BB = 1;
   private static int i = 0;
   public Switchtest()
      i = 0; // <- OK
      switch(i)
         case AA: break; //<- OK, funny no problem
         case BB: break; //<- OK
         default: break;
private class InnerClass
      public InnerClass()
         i = 0; // <- OK: is accessible
         if (AA == i) // <- OK: AA is seen by the inner class; i is also accessible
            i = AA + 1;
         switch(i)
            case AA: break; // <- STRANGE?! Fail: Constant expression required
            case BB: break; // <- OK
            default: break;
}Thank's a lot for an explanation.

Just a though:
Maybe some subclass of Switchtest could decalare its own variable AA that is not final, but it can not declare its own BB because it is visible from the superclass. Therefore the compiler can not know for sure that AA is final.

No compiler error when assigning null to a primitive with ? :

In 5.0, the statement
int a = true ? null : 0;
does not produce a compiler error. In 1.4 it produced an error stating "Incompatible conditional operand types int and null". I understand that auto-boxing complicates the compiler's job here, but isn't it still possible for the compiler to error on this statement?

That's perfectly legit in 1.5 because of autoboxing.
The compiler looks at the expression
true?null:0and needs to determine the type produced by it. 0 can be autoboxed to an Integer and null is a valid Integer value, so that expression produces an Integer.
Then, it tries to auto-unbox the Integer to assign it to the primitive int. And the same thing happens as always happens when you try to auto-unbox null: you get a NullPointerException. :)

Why compilation error--when trying to access the table from itcsi schema

Hi,
when querying the table from itcsi.app iam able to see the data but used in proc saying invalid table name. Whats the problem
when declared p_app_i_old app.app_i%type----It is throwing pls-00201 error
1 Create or replace procedure Test_insert(p_app_i_old integer,
2 p_app_i_new integer,
3 p_APP_ISAC_CPT_I varchar2)
4 is
5 cursor c1 is
6 select distinct table_name,owner
7 from all_tab_columns
8 where owner = 'ITCSI' and column_name='APP_I';
9 t_tablename varchar2(25);
10 t_string varchar2(300);
11 t_num number;
12 Begin
13 For c2 in c1 loop
14 t_num := 0;
15 t_string := 'SELECT count(*) FROM ' || c2.owner ||'.'||c2.table_name||' WHERE APP_I = '||p_
16 execute immediate t_string into t_num;
17 if t_num > 0 then
18 -- dbms_output.put_line('The table name is '||c1_rec.table_name);
19 if c2.Table_name = 'APP' Then
20 INSERT INTO itcsi.App
21 SELECT p_app_i_new,
22 app_acrnym_c,
23 app_x,
24 app_desc_t,
25 app_ipads_t,
26 app_prdcn_stat_t,
27 app_prdcn_stat_d,
28 app_isd_tier_c,
29 app_bus_cont_c,
30 app_extnl_cstm_c,
31 app-ecrpt_lvl_c,
32 app_isac_cpt_i,
33 dsw_gpn_i,
34 ed_cntnt_srce_t,
35 usr_upd_uunm_i,
36 ed_upd_m
37 FROM itcsi.APP
38 WHERE app_i = p_app_i_old;
39 elsif c2.Table_name = 'APP_CETRN' Then
40 Insert into itcsi.APP_CETRN
41 select p_app_i_new,
42 app_cetrn_i,
43 app-curr_cmplnc_t,
44 app_rqr_cmplnc_t,
45 dsw_gpn_i,
46 ed_cntnt_srce_t,
47 usr_upd_uunm_i,
48 ed_upd_m
49 FROM itcsi.APP_CETRN
50 WHERE app_i = p_app_i_old;
51 elsif c2.Table_name = 'APP_GPC' Then
52 Insert into itcsi.APP_GPC
53 select p_app_i_new,
54 gpc_dpnt_x,
55 gpc_elemy_x,
56 pro_i,
57 dsw_gpn_i,
58 ed_cntnt_srce_t,
59 usr_usr_upd_uunm
60 FROM itcsi.APP_GPC
61 WHERE app_i = p_app_i_old;
62 End if;
63 End if;
64 End loop;
65 --Commit;
66* End;
SQL> /
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE TEST_INSERT:
LINE/COL ERROR
20/2 PL/SQL: SQL Statement ignored
37/23 PL/SQL: ORA-00942: table or view does not exist
40/2 PL/SQL: SQL Statement ignored
Thanks

how do i check the grant?
if am in my own schema,how do i connect to itcsi
schema?if you are using a schema other than the ITCSI schema, you need to login as ITCSI. or if you have dba user account you can grant a privilege of
GRANT ALL on ITCSI.APPS to <other SCHEMA>;

No Driver Error when including Traditional DAQ in CVI 9.0 Distribution Kit

I have some legacy code (CVI 6.0) that I wanted to upgrade recently. The biggest reason was the ability to add the device drivers to the distribution kit. When I installed the software on a new machine I got a No Driver Error when doing a CounterStart call . In the past that error meant that I had not included CVI support when I installed Traditional DAQ. Since it was installed as part of a distribution kit I can't see what elements were installed. I assume since it was included as part if a CVI distribution kit that CVI support is automatically. How can I get rid of the no driver error?
Thanks,
CP
Solved!
Go to Solution.

Hi, Clutch
try this, build->distribution->managing distribution -> build step. and in drivers&components Table, you can select the driver you want to include.
see graph below
hope this can help !
B.R
Gerry
Attachments:
kits.JPG ‏116 KB

Error when launching Photoshop CS5

Photoshop CS5 bring up the following error when launching the application
"The program can't start because MSVCP110.dll is missing from your computer"
Uninstalling and resintalling the application does not resolve this problem

http://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html
Mylenium

"Exit Code: 7" error when installing Photoshop Elements 10

I just bought Adobe Photoshop Elements 10. I have a Macbook and I have Mac OS X 10.6.8. When I attempt to install this software I get the error below. I restarted and try a few more times and got the same error. Any suggestions?
Thanks,
Jordan
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 19 error(s), 1 warning(s)
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirBxHaKJWk/Assets2/LibAppSupport/Photo Creations/backgrounds/BG_DistressedCremeSolid.jpg" to "/Library/Application Support/Adobe/Photoshop Elements/10.0/Photo Creations/backgrounds/BG_DistressedCremeSolid.jpg" Error 0(Seq 2132)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 2132)
ERROR: DF037: Unable to delete directory "/Library/Application Support/Adobe/Photoshop Elements/10.0/Photo Creations/backgrounds"(Seq 1611)
ERROR: DW063: Error rolling back command ARKCreateDirectoryV2Command(Seq 1611)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Message title was edited by: Brett N

Did you remove the bits of the failed install before going on? Try creating a new admin account for the install. If that doesn't work, try doing a fresh download from Adobe's site. Even if you bought the boxed version you can install the trial and enter your serial number.

R6025 Runtime Error when starting Photoshop Elements Organizer 12

I installed Photoshop Elements 12 a couple of weeks ago. When I run the Photo Editor, everything is fine. But when I try to run the Organizer, I get the Microsoft Visuall C++ Runtime Library dialog that specifies a Runtime Error! for Program: C:\Program Files (x86)... with error code R6025 - pure virtual function call.
My PC is a 64bit Windows 7 Machine with SP1.
Any ideas?
Thanks.

I tried the first solution listed and that did not help. Part of the 2nd solution was to create a new user on the PC and uninstall/reinstall the software using the new user account. I did this and I no longer get the R6025 error. Now I get a R6034 error when I open the Organizer.
Any ideas on the R6034 error?

Compiler errors when using dynamic text in a class

I have created a MovieClip with a custom class that has a dynamic text field (called "textArea"), which I want to modify by the Component Inspector, as well as via a custom method using:
textArea.text = newText;
It works fine in all cases and there are no problems, but the compiler still wants to give me the error:
1120: Access of undefined property textArea.
The error doesn't appear when I remove the component parameters (so that it's just a normal MovieClip). It still works, even with the error, so I'm not sure why it wants to complain. Am I doing something wrong or is it just being bitchy?

By defining them in the class and using the class name under component definition:
[Inspectable(name="Text", type=String, defaultValue="")]
public function set text(setText:String)
textArea.text = setText;
public function get text():String
return textArea.text;
A problem I run into is that the compiler errors prevent the parameters from being defined so I comment out every line that has to do with textArea, define the component, then uncomment them so that it'll work when it runs.

ShObjIdl.h compile error when including Photoshop SDK header?

Similar Messages

Maybe you are looking for