Short dump in reading selection values in Report

Hi all,
I have created a Navegational Attributte and added this Info Object in the existing Query and for this object we have created Charactistics Value Variable with Uesr Entry.
But, When we use input selection option to select a vlaue for this Variable in the Variable Selection Screen it is trying to read the values and going into short Dump but for other variables Selection option is working fine.
Please anyone help me if you have the solution.
Regards,
Ali.

Hi,
Try deleting the master data and reload the master data again and check for the selection variables. Check the short dump in ST22 it will say which master table ie SID table or master table where the join fails.
Thanks,
Arun

Similar Messages

Getting short dumps while reading bulky data from excel sheet

Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._

for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone).

Short dump with a select statement

I have the following select statement (I have also inluded my data statement(s)) and I get a short dump. The error is as follows:
What happened?
 Error in ABAP application program.
The current ABAP program "ZPARTNER" had to be terminated because one of the
 statements could not be executed.
This is probably due to an error in the ABAP program.
Following a SELECT statement, the data read could not be placed in AN
 the output area.
 A conversion may have been intended that is not supported by the
 system, or the output area may be too small.
Error analysis
 An exception occurred. This exception will be dealt with in more detail
 below. The exception, assigned to the class 'CX_SY_OPEN_SQL_DB', was not
 caught, which
 led to a runtime error. The reason for this exception is:
 The data read during a SELECT access could not be inserted into the
 target field.
 Either conversion is not supported for the target field's type or the
 target field is too short to accept the value or the data are not in a
 form that the target field can accept 
it_adrc TYPE TABLE OF adrc,
 wa_adrc LIKE LINE OF it_adrc,
SELECT addrnumber name1 street city1 region post_code1 tel_number
FROM adrc INTO TABLE it_adrc
FOR ALL ENTRIES IN it_detail
WHERE addrnumber = it_detail-adrnr.
Regards,
Davis

If you only need the fields mentioned in the select query, then follow this:
TYPES: BEGIN OF ADRC_TYPE,
 ADDRNUMBER LIKE ADRC-ADDRNUMBER,
 NAME1 LIKE ADRC-NAME1,
 STREET LIKE ADRC-STREET,
 CITY LIKE ADRC-CITY,
 REGION LIKE ADRC-REGION,
 POST_CODE1 LIKE ADRC-POST_CODE1,
 TEL_NUMBER LIKE ADRC-TEL_NUMBER,
 END OF ADRC_TYPE,
 ADRC_T_TYPE TYPE TABLE OF ADRC_TYPE.
DATA: IT_ADRC TYPE ADRC_T_TYPE WITH HEADER LINE.
IF NOT IT_DETAIL[] IS INITIAL.
SELECT addrnumber name1 street city1 region post_code1 tel_number
FROM adrc INTO TABLE it_adrc
FOR ALL ENTRIES IN it_detail
WHERE addrnumber = it_detail-adrnr.
ENDIF.
Thanks,
SKJ

Short Dump While creating a Value Driver Tree

Hi all,
I am trying to create a value driver tree in CPM. i am on SEM verion 3.1b. I am able to create the value driver tree but when i goto the graphical view it generates a ABAP short dump. does anybody have any idea on this

hi srini,
Elaborate it clearly .
Regards ,
Muneeh Gitta.

Short dump while reading a currency field from Flat file into internal tabl

Hi,
I am getting a short dump........saying number conversion dump (while reading a currency value into field in internal table from a fixed lenght flat file).........
Do I need to use a string variable to get the value from flat file or how ??
Please suggest.

Santosh,
Thanks for your inputs,
But my internal table type is of DEC (5,2) , I am getting that... it needs to be of type 'C'. Can you suggest.
Ex :
MOVE wa_temp-infile_string+106(8) TO wa_item-QT_PERCENT
This didnt work
so i tried moving into a seperate variable
MOVE wa_temp-infile_string+106(8) TO v_percent.
and then write to
WRITE v_percent to wa_item-QT_PERCENT.

Unable to read selected values from selectManyListbox control

I have selectManyListbox component in my jsp page as follows:
<h:selectManyListbox id="allBusinessFunctions" styleClass="maintxtbox selectCampaignBox" >
<f:selectItems value="#{pc_CreateCampaigns.bizFunctions}"/>
</h:selectManyListbox>
I am doing multiple selections on the component. In the same jsp page I have graphicImage component as follows:
<h:graphicImage id="createCampaignLink" alt="Click on this" url="/theme/img/button-use.gif">
<hx:behavior event="onclick" behaviorAction="get" targetAction="bizFunDetailsGroup"></hx:behavior>
</h:graphicImage>
On click of this graphicImage I am invoking a ajax call to one of the backing bean method getDisplayBizFunctions().
I also have a panel group component as follows:
<h:panelGroup id="bizFunDetailsGroup" styleClass="panelGroup">
<h:dataTable id="bizFunDetails" value="#{pc_CreateCampaigns.displayBizFunctions}" var="bizFunctions" border="0">
<h:column>
<f:facet name="header">
 <h:outputText value="Column1"/>
</f:facet>
<h:outputText value="#{bizFunctions}"/>
</h:column>
</h:dataTable>
</h:panelGroup>
<hx:ajaxRefreshRequest id="ajaxRefreshRequest3" target="bizFunDetailsGroup" params="allBusinessFunctions"></hx:ajaxRefreshRequest>
In my backing bean I have a method as follows:
public ArrayList getDisplayBizFunctions(){
bizTypeSearch = (String)getRequestParam().get("allBusinessFunctions");
System.out.println("bizTypeSearch =" + bizTypeSearch );
 return null;
I am trying to read the multiple selected values of as
getRequestParam().get("allBusinessFunctions");
Which is returing only the first selected items value but not all..
How can get all the selected values?

To the point: you should have used HttpServletRequest#getParameterValues(), not getParameter().
In this specific case: just bind the <h:selectManyListbox> 'value' property with a List<BizFunctionType> property in the backing bean.

Reading selected values from af:selectManyListbox

Hi
got af:selectManyListbox in the page with the dept_id as the base attribute and dept_name as the display attribute.
Since its multi select i'm able to read the selected values using array as per the following code
 BindingContext bc1 = BindingContext.getCurrent();
 DCBindingContainer binding1 = (DCBindingContainer)bc1.getCurrentBindingsEntry();
 JUCtrlListBinding listBindings1 = (JUCtrlListBinding)binding1.get("DEPTVIEW1");
 Object str[] = listBindings1.getSelectedValues();
 System.out.println("after Object str[] = listBindings1.getSelectedValues();");
 for (int i = 0; i < str.length; i++) {
 System.out.println(str[i]);
which is returning the dept_id s since its the base attribute
say
2
3
6
on basis of selection
I got to retrieve the DEPT_NAME too?
How to fetch the DEPT_NAME which is the display attribute??
Bindings has the DEPTVIEW1 in the variables. so i cant separately access the DEPT_NAME too from bindings.
Thanks
Chaya

Hey chaya,
I use a similar method of what you use, but i use it with selectionEvents but take a look at my code and see if it can help you:
 //get access to the master table to read selected row keys
 RichTable rt = (RichTable) selectionEvent.getSource();
 RowKeySet rks = rt.getSelectedRowKeys();
 while (selectedRowsIterator.hasNext()) {
 List rowKey = (List) selectedRowsIterator.next();
 //make the row current
 rt.setRowKey(rowKey);
 JUCtrlHierNodeBinding wrappedRow = (JUCtrlHierNodeBinding) rt.getRowData();
 Row rw = wrappedRow.getRow();
 long var_dimCoinInt = (Long) rw.getAttribute("PkCoin");
regards,
Frederico.

Read selected values from a multi choice field programatically using Microsoft.SharePoint.Client namespace.

All examples I found refer to classes under Microsoft.SharePoint namespace. However, I have the SharePoint CSOM that only gives me the Microsoft.Sharepoint.Client namespace.
I need to read the selected values of a multichoice field, but not sure how to do it with classes in the namespace above.
everthing works, exept the TSQL_x0020_Reference_x0020_Numbe field.
my code looks like this:
Webweb = cont.Web;
 cont.Load(web);
 cont.ExecuteQuery();
Listsstest = web.Lists.GetByTitle("T-SQL
Code Review Tracking");
//CamlQuery query = CamlQuery.CreateAllItemsQuery();
CamlQueryquery =
newCamlQuery();
 query.ViewXml =
@"<View>
 <ViewFields>
 <FieldRef Name='Category'/>
 <FieldRef Name='Review_x0020_Type'/>
 <FieldRef Name='Review_x0020_Start_x0020_Date'/>
 <FieldRef Name='Title'/>
 <FieldRef Name='Location'/>
 <FieldRef Name='Project'/>
 <FieldRef Name='Author0'/>
 <FieldRef Name='AssignedTo'/>
 <FieldRef Name='TSQL_x0020_Reference_x0020_Numbe'/>
 </ViewFields>
 </View>"
ListItemCollectionitems
= sstest.GetItems(query);
 cont.Load(items);
 cont.ExecuteQuery();
foreach(ListItemitem
initems)
 Output0Buffer.AddRow();
 Output0Buffer.ReviewStatus = item.FieldValues[
"Category"] !=
null? item.FieldValues["Category"].ToString()
: String.Empty;
 Output0Buffer.ReviewType = item.FieldValues[
"Review_x0020_Type"] !=
null? item.FieldValues["Review_x0020_Type"].ToString()
: String.Empty;
 Output0Buffer.ReviewDate =
DateTime.Parse(item.FieldValues["Review_x0020_Start_x0020_Date"].ToString());
 Output0Buffer.Module = item.FieldValues[
"Title"] !=
null? item.FieldValues["Title"].ToString()
: String.Empty;
 Output0Buffer.BranchLocationURL = item.FieldValues[
"Location"] !=
null? item.FieldValues["Location"].ToString()
: String.Empty;
 Output0Buffer.ProjectName = item.FieldValues[
"Project"] !=
null? item.FieldValues["Project"].ToString()
: String.Empty;
 Output0Buffer.Author = item.FieldValues[
"Author0"] !=
null? item.FieldValues["Author0"].ToString()
: String.Empty;
FieldLookupValueflvAssignedTo =
newFieldUserValue();
 flvAssignedTo = item.FieldValues[
"AssignedTo"]
asFieldLookupValue;
if(flvAssignedTo !=
null)
 Output0Buffer.AssignedTo = flvAssignedTo.LookupValue;
varv = item.FieldValues["TSQL_x0020_Reference_x0020_Numbe"];
if(v !=
null)
 Output0Buffer.Reason2 = v.ToString();
 Output0Buffer.SetEndOfRowset();

Hi,
According to your description, my understanding is that you want to read the selected choice field value using Client Object Model.
In my environment, I create a list with a mutichoice fileld named "choice" and then I used the code snippet below to get the selected value in choice field.
ClientContext clientContext = new ClientContext("http://sp2013sps/sites/test1");
Microsoft.SharePoint.Client.List spList = clientContext.Web.Lists.GetByTitle("list1");
clientContext.Load(spList);
clientContext.ExecuteQuery();
if (spList != null && spList.ItemCount > 0)
Microsoft.SharePoint.Client.CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View>
<ViewFields><FieldRef Name='choice' /></ViewFields>
</View>";
ListItemCollection listItems = spList.GetItems(camlQuery);
clientContext.Load(listItems);
clientContext.ExecuteQuery();
string value = listItems[0]["choice"].ToString();
Console.WriteLine(value);
Console.ReadKey();
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Short dump while reading Payroll results

we have a Z program to read the payroll results for a quarter(3 months)for a large number of employees.
As the internal allocated memory is 2G. This is exceeding that limit resulting in a short dump.
There are no big internal tables in the program except reading some 8 infotypes using rp-provide and get pernr one at a time.
But, in the FM CU_READ_RGDIR the pcl2 cluster records are being stored in an internal table IMPORT_DATA[] and not refreshed, which I think is the cause for the large memory usage. Any suggestions or directions are welcome.
Any suggestions
Thanks,
Kumar

Santosh,
Thanks for your inputs,
But my internal table type is of DEC (5,2) , I am getting that... it needs to be of type 'C'. Can you suggest.
Ex :
MOVE wa_temp-infile_string+106(8) TO wa_item-QT_PERCENT
This didnt work
so i tried moving into a seperate variable
MOVE wa_temp-infile_string+106(8) TO v_percent.
and then write to
WRITE v_percent to wa_item-QT_PERCENT.

Short Dump for Dynamic Select Query

Hello all,
I get a short dump for my dynamic select query at the end of the code. The error is "The types of operands "dbtab" and "itab" cannot be converted into one another."
My code looks like below.
FORM get_ccnum_2 USING p_tabname TYPE dd03l-tabname.
DATA: p_table(30) TYPE c.
FIELD-SYMBOLS: <dyn_wa>,
 <t> TYPE table.
DATA: it_fldcat TYPE lvc_t_fcat.
TYPE-POOLS : abap.
DATA: it_details TYPE abap_compdescr_tab,
 wa_details TYPE abap_compdescr.
DATA: ref_descr TYPE REF TO cl_abap_structdescr.
DATA: new_table TYPE REF TO data,
 new_line TYPE REF TO data,
 wa_it_fldcat TYPE lvc_s_fcat.
p_table = p_tabname.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
LOOP AT it_details INTO wa_details.
 CLEAR wa_it_fldcat.
 wa_it_fldcat-fieldname = wa_details-name .
 wa_it_fldcat-datatype = wa_details-type_kind.
 wa_it_fldcat-intlen = wa_details-length.
 wa_it_fldcat-decimals = wa_details-decimals.
 APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fldcat
 IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <t>.
CREATE DATA new_line LIKE LINE OF <t>.
ASSIGN new_line->* TO <dyn_wa>.
wa_cond = 'CCNUM <> '' '' '.
APPEND wa_cond TO tab_cond.
 SELECT * INTO TABLE <t>
 FROM (p_table)
 WHERE (tab_cond)
 ORDER BY (tab_ord).
ENDFORM. " GET_CCNUM_2

Hi,
I tried to execute the code using table BSEGC and it gave a short dump..
the actual exception that shows in ST22 IS ..UNICODE_TYPES_NOT_CONVERTIBLE..
I think there is something wrong in the internal table creation..
Instead of using the method cl_alv_table_create=>create_dynamic_table to create the dynamic table I used the following and it worked..
CREATE DATA new_table TYPE TABLE OF (p_table).
* Comment begin " Naren
* ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
* it_details[] = ref_descr->components[].
* LOOP AT it_details INTO wa_details.
* CLEAR wa_it_fldcat.
* wa_it_fldcat-fieldname = wa_details-name .
* wa_it_fldcat-datatype = wa_details-type_kind.
* wa_it_fldcat-intlen = wa_details-length.
* wa_it_fldcat-decimals = wa_details-decimals.
* APPEND wa_it_fldcat TO it_fldcat .
* ENDLOOP.
* CALL METHOD cl_alv_table_create=>create_dynamic_table
* EXPORTING
* it_fieldcatalog = it_fldcat
* IMPORTING
* ep_table = new_table.
* Comment End. " Naren
CREATE DATA new_table TYPE TABLE OF (p_table). " New code by naren
Please Try this..
Thanks
Naren

Short dump while creating a new status report in webdynpro cprojects

Short dump details are
Runtime Errors       OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Access via 'NULL' object reference not possible.
GET_AVAIL_CALID" "(METHOD)", of the class CL_DPR_BUPA_DISTRIBUTION failed to capture the Business partner details.
The dump analysis shows
You attempted to use a 'NULL' object reference (points to 'nothing') access a component variable: "LR_BUPA_LINK").
    An object reference must point to an object (an instance of a class)     before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Can anyone throw some light on this?

Hello Srikanth,
I have no issues in trying to help someone as polite as you! It is very nice to have questions answered in an intelligible manner - not unfortunately always the case.
Without being able to debug on your system it is quite difficult to say what might be causing this error - especially as you say this was working in a different system.
I'm sure you've already tried eliminating differences in your authorisations between the two systems? Are you registered as a developer in the new system?
Sorry I'm now just guessing as I've not come across the error myself - hopefully now that we have clearly documented the issue, someone else might be able to shed some light on what might cause it!
Chris

Reading Infoobject value in Report

Hi,
I have an infoobject with hierarchy say POBJECT. a variable called HPOBJECT is created so that user is can sleect the Hierarchy and Node of the Hierarchy.
Now the task is i need to create an another variable which reads the Hierarchy value of the POBJECT.Normally i_t_var_range in CMOD should contain the value. so that i can read the value based on the HPOBJECT . But the problem here is in different Queries they have used different variables for the object POBJECT like HPOBJECT and QOPBJECT.
so i have a problem in making a statement like
READ TABLE i_t_var_range INTO l_var_range WITH KEY vnam = '.HPOBJECT'. As this vnam is not same for all the Queries. so i want to read the value of the POBJECT rather than reading based on the vnam.
I can also make the statement
from
READ TABLE i_t_var_range INTO l_var_range WITH KEY vnam = '.HPOBJECT'.
to
READ TABLE i_t_var_range INTO l_var_range WITH KEY IOBJNM = 'POBJECT, but the problem here is POBJECT conatins Hierarchy and also Node.
Does any body have an idea how this can be achieved?.
Thanks.
Praveen.

Hi
Is your contr area currency same as comp code currency? If yes, then this difference shall not arise....
Check for any OSS notes or raise it to SAP if your both currencies are same
BR,Ajay M

Short dump when exporting the ALV grid report in to spread sheet

HI,
I am facing a problem when downloading ALV grid report in to spread sheet LIST>EXPORT>LOCAL FILE -->SPREADSHEET.
in shotdump the cursor shows : "assign cline+cbegin(clength) to <field_cont>."
In SAP internal table LIST,in the first record the value of the filed LENG is 0. when i have changed this value ex:10 etc it is coming properly.
Kindly help me
Nagendra

Is this a standard SAP report, or your own? Can you tell what your report does, if it is a custom ALV report?

Selection values in Report Painter Report

Hi All,
I am creating a report painter report for Plan/Actual values using library 0FL.In my characteristic value column I included fiscal year as a value and hard coded the fiscal year so i dont need this parameter in my selction screen.When I execute the report the fiscal year is coming in the selection twice.i.e:
Fiscal Year
Fiscal Year
Company Code
Period
From Profit Center
To Profit Center
How do I wipe out this fiscal year from my selection screen? In GRR2 -> EDIT--> General data selection , I only have profit center values.I dont know why this fiscal year is coming up as a selction parameter when I hard coded in the column.Any help.Thanks
Regards
Shaun

HI Shaun
In GRR2, Against the char, there is a check box where in you specify to treat it as a variable.. DId you check that box? Unless you check that, it wont appear in the selection screen
Regards
Ajay M

Set focus to a report region after select value (user) report region

Hello,
On my page I have 4 report SQL Query report regions (among themselves). After selecting (user) of a value (report region number 3 with column link), the result shown in report region number 4. However, the focus is on report region number 1. The user sees the results do need to scroll down to see the answer(in report region number 4).
Does anyone have a solution for me with an example. Thanks.

Hi Varad,
sorry for the delayed response.
Please check the page:- 9999 of App:-964
I have made 2 simple reports with a button in each region.
SUCCESS MESSAGE of first one:- first process run by first report
SUCESSS MESSAGE of second one:- Saved Data..process run for second report
when first process is run by clicking the SUBMIT button in the first region, we will see the same first region back. But, when we click the SAVE button of second region, page submits and we will see the first region and user should scroll down to see the second region.
so, I am trying to see if I can have user see the same region back[second region,when SAVE button clicked, in this case] if he has done any operations on second region. My actual page has around 6 regions where scrolling down might be pain full for a end user.
Have created this page in a hurry .. My actual pages and processes are doing some use full job, the page I have given here is only for our testing purpose. please do not mind.
Thanks a lot for helping me..
Chaitu..
Edited by: Chaitu_Apex on Apr 14, 2010 9:51 AM

Short dump in reading selection values in Report

Similar Messages

Maybe you are looking for