Short dump with error RSW_CURRENCY_TRANSLATION while loading SRM data
Hi All,
I am loading data from SRM to BW. From data source 0BBP_TD_CONTR_2 to DSO 0SRCT_DS1. Data is loaded from source to PSA. When loading from PSA to DSO using DTP, I am getting a short dump with below error. Can one please let me know solution if you have faced the same problem previously?
Termination occurred in the ABAP program "SAPLRSW0" - in
"RSW_CURRENCY_TRANSLATION".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 86
of the (Include) program "LRSW0U09".
The program "SAPLRSW0" was started as a background job.
I have checked the DSO routines and objects, everything is ok. Replicated all currency conversion tables from source.
0PSTNG_DAT infoobject is also active. There is no errors in Development while loading, when moved to quality, the error is throwing.
Regards,
Don
Hi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don
Similar Messages
-
Error 8 while loading the data from the souce system
Hi Gurus
Every day we are loading some data from one of our souce systems through process chain
But today all the loads failed complaining about error 8 while extacting the data
connection to source system is fine
we have the problem while loading master data from the same source system
any solution?
Thanks in advanceHi,
Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
hope it helps...
regards,
Raju -
Short dump with error :TSV_TNEW_INDEX_NO_ROLL_MEMORY
This is the error that i'm getting
ABAP runtime errors TSV_TNEW_INDEX_NO_ROLL_MEMORY
Occurred on 29.01.2007 at 20:27:13
>> Short dump has not been completely stored. It is too big.
No roll storage of length 64094208 available for internal table index.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
Please advice.
Points Assured
Regards,
Ravikanth.It is as it says - a problem of not enough (ROLL) memory.
- You can ask basis to look into it - whether ROLL memory on app server can be increased.
- You can run whatever you are running at a time when the load on the system is less.
- You can check the code that runs to see why it should look for so much memory - maybe you can change the code so it uses less memory. -
Short dump with error FORM "CLEAR_SPECIAL_TABLES" does not exist"
Hi All,
We are experiencing an issue in our development system. We have recently upgraded to ECC6 from ECC5. While executing FBL3N transaction, we are getting a dump with description Syntax error in program "RFEPOS00 ".
The following syntax error occurred in program "RFEPOS00 " in include "RFPOSFZ0 "
line 1072:
"FORM "CLEAR_SPECIAL_TABLES" does not exist"
I checked in our previous systems, the subroutine CLEAR_SPECIAL_TABLES exists with an empty body in include RFPOSFC1.
And it is created by DDIC.
As per the comments in the include RFPOSFC1, we tried to generate the program RFXPRA33. But it is giving same error FORM "CLEAR_SPECIAL_TABLES" does not exist" .
Any help to resolving this issue will be appreciatable.
Thanks in advance.
Edited by: Kumar.ktk on Jun 8, 2010 1:36 PMHi,
We just had this issue after an upgrade and the solution was to compare the coding with an unupgraded system,
there we found that this missing form exists in an include with this documentation:
Function LINE_ITEMS_SPECIAL_FIELDS
caller L0F14I01, AFTER_SAVE_T021S, tcode O7R3
In case of errors: Start RFXPRA33
FORM CLEAR_SPECIAL_TABLES.
ENDFORM.
After we executed program: RFXPRA33 all errors were resolved,
Hope this helps,
Mickey -
Error 194 while loading Master Data.
Hi,
I've a custom Info Object which has 0MATERIAL as an attribute. While trying to load master data to this custom info object using DBConnect , I'm getting the error:
RSDMD 194
0MATERIAL: Data record 1('0001003') : Version '1009841' is not valid.
I think it's a problem with conversion exit. But I'm not able to solve this problem. It would be of great help if you could guide me on how to overcome this.
Thanks in advance.
Regards
HariHari,
I'm thinking for DB Connected datasources we have Propose Tab Page and Fileds Tab Page. In the Propose tab Page you can see data type and Format(internal or External or check). select external, put data type of your Material Infoobject Data type in the Propose Tab Page.
all the best.
Note: I'm thinking DB Connected Datasources got Propose Tab page. Please correct me if i'm wrong.
Regards,
Nagesh Ganisetti.
*Assign Points if it helps -
Creating a report of all the errors occured while loading legacy data
hi guys,
i am using Bapi to load legacy data .
how can i list all the errors that occur during the transfer .
i want to see all the errors that occured and create a report .
thanks .Hi look at this code... you will get an idea
CALL FUNCTION 'BAPI_BUPA_FS_CREATE_FROM_DATA2'
EXPORTING
* BUSINESSPARTNEREXTERN =
partnercategory = c_2
partnergroup = c_rp
centraldata = wa_centraldata
IMPORTING
businesspartner = w_partner
TABLES
return = it_return.
* Check for errors
CLEAR wa_return.
READ TABLE it_return INTO wa_return WITH KEY type = c_e.
IF sy-subrc EQ 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = wa_return-id
lang = sy-langu
no = wa_return-number
v1 = wa_return-message_v1
v2 = wa_return-message_v2
v3 = wa_return-message_v3
v4 = wa_return-message_v4
IMPORTING
msg = wa_return-message
EXCEPTIONS
not_found = 1
OTHERS = 2.
ENDIF. " IF sy-subrc EQ 0 -
ST22 short dump with error DFIF_REPO_SQL_ERROR
HI, All
SAP ERP 2004s on windows 2003x64 with SQLserver database.
Here is ST22 and dev_w0
20.03.2014 Dynamic List Display 1
Runtime Error
|Date |Time |Host |User |Client|Keep|Name of runtime error|Exception|Appl. component|Report|No. Sess|
|20.03.2014|08:48:44|clusterx64|SAPSYS|000 |C |DBIF_REPO_SQL_ERROR | | | |1 |
|20.03.2014|08:18:44|clusterx64|SAPSYS|000 |C |DBIF_REPO_SQL_ERROR | | | |1 |
D:\usr\sap\PRD\DVEBMGS00\work\dev_w0
trc file: "dev_w0", trc level: 1, release: "640"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, M
B
B Mon Mar 17 13:26:13 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.405)
B New connection 0 created
M sysno 00
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 414
M intno 20020600
M make: multithreaded, Unicode, 64 bit
M pid 4544
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4544) [dpxxdisp.c 1227]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 58560 (1464)
M DpShMCreate: sizeof(tm_adm) 38387184 (19184)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 1248000 (624)
M DpShMCreate: sizeof(vmc_adm) 0 (512)
M DpShMCreate: sizeof(wall_adm) (400056/346328/64/192)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B9B0050, size: 40479544)
M DpShMCreate: allocated sys_adm at 000000000B9B0050
M DpShMCreate: allocated wp_adm at 000000000B9B1C30
M DpShMCreate: allocated tm_adm_list at 000000000B9C00F0
M DpShMCreate: allocated tm_adm at 000000000B9C0118
M DpShMCreate: allocated wp_ca_adm at 000000000DE5BF08
M DpShMCreate: allocated appc_ca_adm at 000000000DE61CC8
M DpShMCreate: allocated comm_adm_list at 000000000DE63C08
M DpShMCreate: allocated comm_adm at 000000000DE63C20
M DpShMCreate: allocated vmc_adm_list at 000000000DF94720
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000DF94748
M DpShMCreate: allocated wall_adm at 000000000DF947B8
M DpRqQInit: Parameter rdisp/queue_lock_level = 2
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M tskhstart: taskhandler started
M tskh_init: initializing DIA work process W0
M tskh_init: rdisp/cleanup_after_crash = 1
M
M Mon Mar 17 13:26:15 2014
M calling db_connect ...
C Thread ID:3128
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C CopyLocalParameters: dbuser is 'prd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Mon Mar 17 13:26:16 2014
C Provider Release:9.00.4035.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Mon Mar 17 13:26:22 2014
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 1000 dynamic statements (5752000 bytes), total 38712104 bytes
C Using shared procedure name cache SAPPRDX64_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: prd
C pn_id:SAPPRDX64_PRDPRD_PRD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png
I
I Mon Mar 17 13:26:26 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000016320050, size: 41613000)
M SHM_ROLL_AREA (addr: 000007FFC4050050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000018AD0050, size: 134217728)
M SHM_ROLL_ADM (addr: 0000000020AE0050, size: 2678942)
M SHM_PAGING_ADM (addr: 0000000020D70050, size: 787488)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0000000020E40050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateNoBuffer: correct_btc_behaviour = 1
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0000000020ED0050
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0000000020F700D8, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0000000020F70320, size: 6240232)
B dbntab: Buffer FTAB(item array) (addr: 0000000021563B08, size: 24960000)
B dbntab: Buffer FTAB(data area) (addr: 0000000022D31708, size: 128000000)
B dbntab: Buffer IREC(hash header) (addr: 000000002A7500D8, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 000000002A750320, size: 6240232)
B dbntab: Buffer IREC(item array) (addr: 000000002AD43B08, size: 6240000)
B dbntab: Buffer IREC(data area) (addr: 000000002B337208, size: 13312000)
B dbntab: Buffer STAB(hash header) (addr: 000000002BFF00D8, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 000000002BFF0320, size: 6240232)
B dbntab: Buffer STAB(item array) (addr: 000000002C5E3B08, size: 6240000)
B dbntab: Buffer STAB(data area) (addr: 000000002CBD7208, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 00000000350400D8, size: 4744)
B dbntab: Buffer TTAB(anchor array) (addr: 0000000035041360, size: 6240232)
B dbntab: Buffer TTAB(item array) (addr: 0000000035634B48, size: 15600000)
B dbntab: Buffer TTAB(data area) (addr: 00000000365154C8, size: 113880000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 40, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 000000002CEEEA58)
B dbtbxbuf: Buffer TABL (addr: 000000003D1C0150, size: 263640000, end: 000000004CD2D510)
B dbtbxbuf: Buffer TABLP (addr: 000000002E780150, size: 61440000, end: 0000000032218150)
B dbexpbuf: Buffer EIBUF (addr: 000000004CD30158, size: 122880000, end: 0000000054260158)
B dbexpbuf: Buffer ESM (addr: 0000000032230158, size: 4194304, end: 0000000032630158)
B dbexpbuf: Buffer CUA (addr: 0000000054270158, size: 30720000, end: 0000000055FBC158)
B dbexpbuf: Buffer OTR (addr: 0000000032640158, size: 4194304, end: 0000000032A40158)
B dbcalbuf: Buffer CALE (addr: 0000000032A50050, size: 500000, end: 0000000032ACA170)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M rdisp/hold_keeps_time_slice -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000010E29190
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 3 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000331C00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 00000000331C0C58
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 50852kb, dir_size: 25348kb.
A Attached to PXA (address 000007FFD4080050, size 720000K, 2 fragments of 334576K )
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FF26F71000 leng=20955136 end=000007FF2836D000)
A >> Shm MMADM area (addr=000007FF2741D070 leng=246976 end=000007FF27459530)
A >> Shm MMDAT area (addr=000007FF2745A000 leng=15806464 end=000007FF2836D000)
A RFC Destination> destination clusterx64_PRD_00 host clusterx64 system PRD systnr 0 (clusterx64_PRD_00)
A RFC Options> H=clusterx64,S=00,d=2
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 83148 bytes at 0000000033330050
Y dyWpInit
Y ztta/dynpro_ara 800000
Y ztta/cua_ara 360000
Y ztta/diag_ara 250000
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\PRD\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\PRD\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0,
B join_conforms_iso = 1
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 640, [6400.0.414.20020600]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [29]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume clusterx64_PRD_00
E Profile-Parameter: enque/sync_dequeall = 0
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S
S Mon Mar 17 13:26:31 2014
S server @>SSRV:clusterx64_PRD_00@< appears or changes (state 1)
S server @>SSRV:clusterx64_PRD_00@< appears or changes (state 1)
B
B Mon Mar 17 13:26:34 2014
B table logging switched off for all clients
N
N Mon Mar 17 13:26:44 2014
N login/password_change_for_SSO : 1 -> 1
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 0000000005990050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 00000000059907B8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 00000000059907F0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 00000000059907FC
M SecAudit(check_daily_file): audit file opened D:\usr\sap\PRD\DVEBMGS00\log\20140317000001.AUD
D
D Mon Mar 17 13:26:51 2014
D GuiStatus: table test
D GuiStatus set generate inline >20140317132651<
D GuiStatus clear generate inline >20140317132651<
B
B Mon Mar 17 13:27:00 2014
B dbmyclu : info : my major identification is 3232240218, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is C8157D392BFA064AAC992593949203BE.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
G
G Mon Mar 17 13:27:03 2014
G GetWritePermissionForShm( pLocation = 283, pEnforce = 0 )
G
G Mon Mar 17 13:27:04 2014
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
M ThEMsgArrived: sysmsg_for_rfc = 0
G
G Mon Mar 17 13:27:18 2014
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
A
A Mon Mar 17 13:31:19 2014
A ***ATRA: session closed by other process
D
D Mon Mar 17 13:35:06 2014
D GuiStatus generation SAPLSUU5 is not running
Y go to separate LUW generation ===> 20140317133506
Y GuiStatus generate texts: SAPLSUU5 M
Y return from separate LUW <=== WP: 1 th_rc=0 OK
G
G Mon Mar 17 13:35:16 2014
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
M
M Mon Mar 17 13:40:02 2014
M ThIUsrDel: th_rollback_usrdelentry = 1
A
A Mon Mar 17 13:44:07 2014
A ***ATRA: session closed by other process
B
B Mon Mar 17 13:46:35 2014
B create_con (con_name=++DBO++0020)
B New connection 1 created
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 1 opened (DBSL handle 1)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000001 ACTIVE NO NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
S
S Mon Mar 17 13:51:33 2014
S found spool memory service RSPO-ACTIONS at 00000000331C9090
D
D Mon Mar 17 14:05:56 2014
D GuiStatus generation RSSTAT26 is not running
Y go to separate LUW generation ===> 20140317140556
Y GuiStatus generate: RSSTAT26 SELECT
Y
Y Mon Mar 17 14:05:57 2014
Y return from separate LUW <=== WP: 2 th_rc=0 OK
Y go to separate LUW generation ===> 20140317140557
Y GuiStatus generate texts: RSSTAT26 E
Y return from separate LUW <=== WP: 1 th_rc=0 OK
D
D Mon Mar 17 14:06:11 2014
D GuiStatus generation RSSTAT50 is not running
Y go to separate LUW generation ===> 20140317140611
Y GuiStatus generate: RSSTAT50 0010
Y
Y Mon Mar 17 14:06:12 2014
Y return from separate LUW <=== WP: 1 th_rc=0 OK
Y go to separate LUW generation ===> 20140317140612
Y GuiStatus generate texts: RSSTAT50 E
Y return from separate LUW <=== WP: 1 th_rc=0 OK
Y
Y Mon Mar 17 14:07:10 2014
Y
Y ===> running separate LUW generation: 20140317140710
Y ===> requesting WP: 1
Y GuiStatus generate: SAPMSRD0 MAIN_NEW
D GuiStatus generate status prog >SAPMSRD0< status >MAIN_NEW< >20140317140710<
D GuiStatus set generate inline >20140317140710<
D GuiStatus clear generate inline >20140317140710<
Y
Y ===> running separate LUW generation: 20140317140710
Y ===> requesting WP: 1
Y GuiStatus generate texts: SAPMSRD0 E
D GuiStatus generate texts prog >SAPMSRD0< >20140317140710<
D GuiStatus set generate inline >20140317140710<
D GuiStatus clear generate inline >20140317140710<
Y
Y Mon Mar 17 14:23:12 2014
Y
Y ===> running separate LUW generation: 20140317142312
Y ===> requesting WP: 1
Y GuiStatus generate: RSMSSDBPAHI 0100
D GuiStatus generate status prog >RSMSSDBPAHI< status >0100< >20140317142312<
D GuiStatus set generate inline >20140317142312<
D GuiStatus clear generate inline >20140317142312<
B
B Mon Mar 17 14:31:34 2014
B create_con (con_name=++DBO++0020)
B New connection 2 created
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000016 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000017 ACTIVE NO NO NO NO NO 004 255 255 20140317 143134 SAPPRDX64
B
B Mon Mar 17 14:51:33 2014
B Disconnected from connection con_da={++DBO++0020,17,2}
B
B Mon Mar 17 15:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000030 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000031 ACTIVE NO NO NO NO NO 004 255 255 20140317 153136 SAPPRDX64
B
B Mon Mar 17 15:51:33 2014
B Disconnected from connection con_da={++DBO++0020,31,2}
B
B Mon Mar 17 16:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C
C Mon Mar 17 16:31:37 2014
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000044 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000045 ACTIVE NO NO NO NO NO 004 255 255 20140317 163136 SAPPRDX64
B
B Mon Mar 17 16:51:33 2014
B Disconnected from connection con_da={++DBO++0020,45,2}
B
B Mon Mar 17 17:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000058 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000059 ACTIVE NO NO NO NO NO 004 255 255 20140317 173136 SAPPRDX64
B
B Mon Mar 17 17:51:33 2014
B Disconnected from connection con_da={++DBO++0020,59,2}
B
B Mon Mar 17 18:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000072 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000073 ACTIVE NO NO NO NO NO 004 255 255 20140317 183136 SAPPRDX64
B
B Mon Mar 17 18:51:33 2014
B Disconnected from connection con_da={++DBO++0020,73,2}
B
B Mon Mar 17 19:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000086 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000087 ACTIVE NO NO NO NO NO 004 255 255 20140317 193136 SAPPRDX64
B
B Mon Mar 17 19:51:33 2014
B Disconnected from connection con_da={++DBO++0020,87,2}
B
B Mon Mar 17 20:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000100 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000101 ACTIVE NO NO NO NO NO 004 255 255 20140317 203136 SAPPRDX64
B
B Mon Mar 17 20:51:33 2014
B Disconnected from connection con_da={++DBO++0020,101,2}
B
B Mon Mar 17 21:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000116 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000117 ACTIVE NO NO NO NO NO 004 255 255 20140317 213136 SAPPRDX64
B
B Mon Mar 17 21:51:33 2014
B Disconnected from connection con_da={++DBO++0020,117,2}
B
B Mon Mar 17 22:31:37 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000130 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000131 ACTIVE NO NO NO NO NO 004 255 255 20140317 223137 SAPPRDX64
B
B Mon Mar 17 22:51:33 2014
B Disconnected from connection con_da={++DBO++0020,131,2}
B
B Mon Mar 17 23:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000144 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000145 ACTIVE NO NO NO NO NO 004 255 255 20140317 233136 SAPPRDX64
B
B Mon Mar 17 23:51:33 2014
B Disconnected from connection con_da={++DBO++0020,145,2}
M
M Tue Mar 18 00:01:33 2014
M SecAudit(check_daily_file): audit file closed D:\usr\sap\PRD\DVEBMGS00\log\20140317000001.AUD
M SecAudit(check_daily_file): audit file opened D:\usr\sap\PRD\DVEBMGS00\log\20140318000001.AUD
B
B Tue Mar 18 00:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000158 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000159 ACTIVE NO NO NO NO NO 004 255 255 20140318 003136 SAPPRDX64
B
B Tue Mar 18 00:51:33 2014
B Disconnected from connection con_da={++DBO++0020,159,2}
B
B Tue Mar 18 01:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000172 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000173 ACTIVE NO NO NO NO NO 004 255 255 20140318 013136 SAPPRDX64
B
B Tue Mar 18 01:51:33 2014
B Disconnected from connection con_da={++DBO++0020,173,2}
B
B Tue Mar 18 02:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000186 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000187 ACTIVE NO NO NO NO NO 004 255 255 20140318 023136 SAPPRDX64
B
B Tue Mar 18 02:51:33 2014
B Disconnected from connection con_da={++DBO++0020,187,2}
B
B Tue Mar 18 03:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000200 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000201 ACTIVE NO NO NO NO NO 004 255 255 20140318 033136 SAPPRDX64
B
B Tue Mar 18 03:51:33 2014
B Disconnected from connection con_da={++DBO++0020,201,2}
B
B Tue Mar 18 04:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000214 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000215 ACTIVE NO NO NO NO NO 004 255 255 20140318 043136 SAPPRDX64
B
B Tue Mar 18 04:51:33 2014
B Disconnected from connection con_da={++DBO++0020,215,2}
B
B Tue Mar 18 05:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000230 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000231 ACTIVE NO NO NO NO NO 004 255 255 20140318 053136 SAPPRDX64
B
B Tue Mar 18 05:51:33 2014
B Disconnected from connection con_da={++DBO++0020,231,2}
B
B Tue Mar 18 06:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000244 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000245 ACTIVE NO NO NO NO NO 004 255 255 20140318 063136 SAPPRDX64
B
B Tue Mar 18 06:51:33 2014
B Disconnected from connection con_da={++DBO++0020,245,2}
B
B Tue Mar 18 07:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000258 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000259 ACTIVE NO NO NO NO NO 004 255 255 20140318 073136 SAPPRDX64
B
B Tue Mar 18 07:51:33 2014
B Disconnected from connection con_da={++DBO++0020,259,2}
B
B Tue Mar 18 08:31:41 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000272 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000273 ACTIVE NO NO NO NO NO 004 255 255 20140318 083141 SAPPRDX64
B
B Tue Mar 18 08:51:33 2014
B Disconnected from connection con_da={++DBO++0020,273,2}
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1128862
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F9FG0332RSEUMODut01i1o211ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F9FG0332RSEUMODut01i1o211ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table RSEUMOD [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B *** ERROR => missing return code handler
abdebug#?[17989] does not handle return code 1 from dbcrtab#6[1596]
==> calling sap_dext to abort transaction
[dbeh.c 84]
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F1CN2138T100ut01i3o4ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1112522
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table T100 [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F1CN2138T100ut01i3o4ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1112522
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table T100 [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
C TestConnection: line 7344. hr: 0x80004005 Unable to open a logical session
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), Unable to open a logical session
C Procname: [TestConnection - no proc]
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [TestConnection - no proc]
C Rollback: TestConnection(0) failed with dbcode 10054
C TestConnection: line 7344. hr: 0x80004005 Unable to open a logical session
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), Unable to open a logical session
C Procname: [TestConnection - no proc]
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [TestConnection - no proc]
C Rollback: TestConnection(1) failed with dbcode 10054
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B Reconnect state is entered by connection:
B 000: name = R/3, con_id = 000000000, state = ACTIVE , tx = NO , hc = NO , perm = YES,
B reco = YES, frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
B hdl_error_on_commit_rollback: DB-ROLLBACK detected RECONNECT state
M ThShortCommit: db unusable
B RECONNECT: rsdb/reco_trials: 3
B RECONNECT: rsdb/reco_sleep_time: 5
B RECONNECT: rsdb/reco_sync_all_server: OFF
B db_con_reconnect: reconnecting to connection 0:
B 000: name = R/3, con_id = 000000000, state = INACTIVE , tx = NO , hc = NO , perm = YES,
B reco = YES, frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
B disconnecting from connection 0 ...
B disconnected from connection 0
B opening connection 0 ...
C Thread ID:3128
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C CopyLocalParameters: dbuser is 'prd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.4035.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 1000 dynamic statements (5752000 bytes), total 38712104 bytes
C Using shared procedure name cache SAPPRDX64_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: prd
C pn_id:SAPPRDX64_PRDPRD_PRD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000279 INACTIVE NO NO NO NO NO 003 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000273 DISCONNECTED NO NO NO NO NO 000 255 255 20140318 085133 SAPPRDX64
B successfully reconnected to connection 0
B ***LOG BYY=> work process left reconnect status [dblink#6 @ 732] [dblink 0732 ]
B
B Tue Mar 18 09:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C
C Tue Mar 18 09:31:36 2014
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000286 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000287 ACTIVE NO NO NO NO NO 004 255 255 20140318 093135 SAPPRDX64
B
B Tue Mar 18 09:51:33 2014
B Disconnected from connection con_da={++DBO++0020,287,2}
B
B Tue Mar 18 10:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000300 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000301 ACTIVE NO NO NO NO NO 004 255 255 20140318 103135 SAPPRDX64
B
B Tue Mar 18 10:51:33 2014
B Disconnected from connection con_da={++DBO++0020,301,2}
B
B Tue Mar 18 11:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NOHi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don -
Records was deleted at R/3 sys - getting error while loading the data
Hi All,
we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
we have replicate the DataSource and activate Trans rules but no use still getting the same error.
when we execute the data source 2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
Could you kindly suggest me any one how to rectify this error.
Thanks in Advance,
Shaliny. Mhai Lilly
I activated myself source system and replicate the my datasource .
Then activate the update rules for ODS , InfoCube and InfoCube .
Then i tried to load the data into InfoCube from ODs .
Again im getting same problem .
why it is like that
pls tell me
rizwan -
Error occurred while loading 0cust_sales hierarchy
Hi,
Could you please help me in resolving the below error occurred while loading hierarchy data to 0CUST_SALES hierarchy, please see the below screen shots:
Regards,
AnushaHi Ramanjaneyulu,
Please find the below screen shot of info package:
I don't find any option to choose PSA.
I have no where found an option to handle the duplicate records.
And also as per my understanding, one of the possible ways to resolve this issue is to contact the person who has uploaded the hierarchy data into R/3 system. But, I am left with no clue to find out who is the user (last changed by) who has uploaded this. Please suggest me on this.
Regards,
Anusha -
Application triggered a termination with a short dump(Assessment error)
Hi,
I created one accessment cycle with couple of segments. While executing this assessment cycle one of the segment is erroring out and it's throwing a runtime error. I searched in OSS and didn't find the right one. I really appreciate your thoughts and answers.
Short text |
The current application triggered a termination with a short dump.
Error analysis
Short text of error message:
Error ERROR_BW_REFBZ
Long text of error message:
Diagnosis
The following program error or handling error has occurred.
Error information:
ERROR_BW_REFBZ
System Response
| Processing is terminated.
Thanks
BrThanks for your quick response Baranyai and we set transfer prices indicator at controlling area level and it's related to profit center valuation. How is going to impact on Assessment cycle and it doesn't appear while creating and executing assessment cycle. I may be wrong and really appreciate your help.
Thanks
Br -
Short dump with an error SAPSQL_LIKE_QUOTES
Hi,
today we have more short dumps with an error SAPSQL_LIKE_QUOTES. this means The logical condition contains a text field literal, for which there is no closing quotation mark.
as per my analysis i found the below code from the std. sap program SAPLBTCH in that include LBTCHF19.
TRANSLATE p_buffer1 USING '*%'.
IF p_buffer1 CO '% '.
IF NOT i_mandatory IS INITIAL.
CONCATENATE i_name '<> ''''' INTO o_where
SEPARATED BY space.
ENDIF.
EXIT.
ENDIF.
can you please tell me that there is a sapce in the line IF p_buffer1 CO '% '.
please advice me if this statement is true or should not contain any spaces between the quotations.
Thanks,
KasiHi Kasi,
please check this link
[SAPSQL_LIKE_QUOTES|http://www.google.com/#hl=en&num=100&q=SAPSQL_LIKE_QUOTES&fp=1&cad=b]
Kind regards,
Clemens -
An error occurred while loading this content - only with iPhone not iPad
I know this issue has been discussed to death with no real solution in sight but my case is slightly different:
1. On my new iPad, I select AppleTV (not mirroring), open Safari, then to YouTube and play any HD video. Immediately, the video will be streamed to the AppleTV with no hassle.
2. I do the same on my iPhone 4, 4S or 5 and all I get is "An error occurred while loading this content. Try again later". This occurs without fail.
If I use Jasmine YouTube client, streaming will work perfectly but alas, this app is prone to the error message "Youtube has restricted feeds for this video" and thus, I can't use this.
If I use the new google youTube app, only the audio gets streamed to the AppleTV. I have to use mirroring and the video does not fill the TV screen but leaving a dark border all round. The streaming is not smooth either. The previous youTube app by Apple works perfectly - never had an issue. As soon as iOS6 came along, I end up with all these problems.
Is there a solution to all this? Currently, I use only my iPad for streaming YouTube videos but I really want to use my spanking new iPhone 5 but can't.
I am so sad.
Can anyone help or am I doomed to use only my iPad for this? I am soooo disappointed with the iPhone 5 due to this.Has any other fixes been found. Since I updated to the latest iOS I've been having a similar problem. It doesn't matter what I stream through either. I bought I ATV2 when they first came out and have been using it perfectly fine, however after the last update I haven't been able to stream my movies, tv or even Netflix.
I've also been having issues with my ATV2 connecting to my windows 7 desktop where I store all of my movies and TV shows. I have to deauthorize home sharing and turn it back on for my ATV2 to recognize that it is even on. Frustrating to say the least. -
Caller-70 Error while loading master data into infoobject
hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
RakeshHi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj -
Error while loading master data to attribute ZMAJORGU(Major organisational unit)
Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
the attribute/characteristic ZMAJORGU &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
KiranRam
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA.. -
Error 0 update while loading master data
Hi,
Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
Thanks & Regards,
Mahi.I've a compounding characteristic in this characteristic.
And the master data loading was fine yesterday but today it doesn't work.
When I check with rsrv this characteristic, a dump with message:
Error in ABAP application program.
The current ABAP program "SAPLRRSI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
"Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. "DATA" statement."
So I think something is wrong in this Char.
But what can I do for that?
Thanks a lot for all idea.
Juan
Maybe you are looking for
-
Hello -- I'm an American living in Ethiopa. I've just ordered a Lumia 710 and joined this group. Does Lumia have any GPS support in Ethiopia?
-
Oracle 9i with WebLogic 6.0. Is it possible?
According to the "Platform Support" page on BEA website (http://www.weblogic.com/platforms/index.html#jdbc) it seems like WL 6.0 doesnot support Oracle 9i connectivity. Am I correct in assuming that? Is there an updated version of Oracle Type 2 drive
-
Windows Media Edition XP/Trial
It ist possible to install Trial 6.10 oder Trial Netweaver 2004 on an Notebook with Windows Media Edition XP? Thanks for any input. Torsten Braun
-
How do i install previous version firefox 4
i require google toolbar i updated to firefox 5.0 only to find out google toolbar does not support it i need to re-install firefox 4
-
After 3 years of so called unlinited broadband (yes I know the downloads are not linited only the speed which has the same damned effect ) and an average monthly use of around 5 Gig I go to 80 G once and get the usual warning why can BT not be a litt