Short run time
Hi all,
I have wrote and modified this code. There's no error in the code, but I am having hard time of fixing the run time. It runs only up to maximum of 350 iteration. I wanted to run until I receive a true value; before it gets there it just says PASS which is my true value. But the computation is not true. Below is an attachment of my code. If you have any idea how to fix this please make suggestion.
Thank you in advance
Solved!
Go to Solution.
Attachments:
tachounter.vi 45 KB
I went ahead and cleaned up your code so that there is only 1 error path, removed locals, only close the serial port once, and (best of all) removed the sequence structures. Yes, the VI looks long, but that's fine. I would highly recommend making subVIs for each of your tasks (what you used to have as sequence steps). See if this works for you.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
tachounter.vi 25 KB
Similar Messages
-
In iTunes: why different run times for same track?
I have occasional repeats of the same given track stored in iTunes. Sometimes, the 2 identical tracks show different running times. This happens when one track came from the Net (downloaded before I started using iTunes, then imported into iTunes) and the other comes from a commercial CD. Do you know why the differing times? FYI: In each case, I have checked the endings of both tracks; they are identical, so the music is the same even though one track is rated to run [much] longer than the other. Also, in "Get Info" there's a way to change the running time of a track, but this is no solution: if I enter a shorter run time, the track will truncate itself, and finish playing before the proper end of the song -- if I enter a longer time, I get dead air after the end of the recording. Any ideas?
Windows XP
Windows XP Pro
Windows XP Pro"will iphone users in Singapore have access to application from other countries? "
No. You can buy from the itunes store in the country in which you reside.
Each country has the same rules:
"SINGAPORE ONLY. The Service is available to you only in Singapore and is not available in any other location. You agree not to use or attempt to use the Service from outside of the available territory. iTunes may use technologies to verify such compliance."
http://www.apple.com/legal/itunes/appstore/sg/terms.html#APPS -
Run time error (short dump) executing program SCAN_BW_REFERENCES in SE80
Hi experts,
I am not an ABAPer, or Basis person, rather a hybrid functional/technical Key User for our Business Warehouse system (BW 3.5, Netweaver 2004). We have a user who cannot save BW reports to his favorites and he is getting a number of error messages. OSS note 887002 seems to address this and indicates that I should run program SCAN_BW_REFERENCES from transaction SE80. The program is supposed to perform the checks for BW objects assigned to the Favorites and identify situations causing terminations in BW frontend applications. I have attempted to execute this program on several occassions and always get run-time errors (short dumps). Here is the error:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 2008.09.17 19:00:49
ShrtText
No storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
I have been informed by our Basis group that I have reached a memory limit, but they will not extend the memory paramters. Any ideas on a work-a-round or a way to minimize the number of records this program is pulling in, in an attempt to get it to run?
Thanks,
HCHi,
The only response I got from Basis was that they would not extend the memory parameters because they are for all users in the system. Not sure what that means.
The full dump is too large to paste here. I think what I will do is to see if our ABAPers can create a modified version of this program to include selection by user. Typically it is for only one user that I need to run the program, and that surely would fall within the space requirements.
Thanks for your answer.
//HC -
Error run time DYNPRO_FIELD_CONVERSION
I have a dump:
Errore run-time DYNPRO_FIELD_CONVERSION
Verific. il 28.11.2007 h 02:12:16
A conversion error occurred.
Causa dell'errore
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
Possibili soluzioni
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Analisi errori
The program flow was interrupted and could not be resumed.
Program "SAPMM06B" tried to display fields on screen 0106. However, an
error occurred while this data was being converted.
Indic. per la correzione
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. "SAPMM06B"
Screen number............ 0106
Screen field............. "EBAN-MENGE"
Error text............... "FX015: Sign lost."
Further data:
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
It is probably not possible to eliminate the system error
with ABAP alone.
If you have access to SAPnet, you can search for a relevant note
using the following keywords:
"DYNPRO_FIELD_CONVERSION" " "
"SAPMM06B" bzw. "MM06BO0R_RM06B-EPSTP"
"RM06B-EPSTP"
Ambiente sistema
SAP Release.............. "620"
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system......... "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 26
Short dump setting....... "full"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database owner........... "SAPR3"
Character set............ "it_IT.ISO8859-1"
SAP kernel............... "640"
Created on............... "Jul 16 2006 20:40:53"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "139"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Utente, transazione.....
Client.............. 300
User................ "CONSULENTI"
Language key........ "I"
Transaction......... "ME52 "
Program............. "SAPMM06B"
Screen.............. "SAPMM06B 0106"
Screen line......... 26
Informazioni punto di interr.
The termination occurred in the ABAP program "SAPMM06B" in "RM06B-EPSTP".
The main program was "SAPMM06B ".
The termination occurred in line 14 of the source code of the (Include)
program "MM06BO0R_RM06B-EPSTP"
of the source code of program "MM06BO0R_RM06B-EPSTP" (when calling the editor
140).
The program "SAPMM06B" was started as a background job.
Errore verificatosi durante un'elaborazione Batch-Input
Dettaglio cd. sorgente
000010 *eject
000020 *----
000030 * Positionstyp aufbereiten *
000040 *----
000050 MODULE RM06B-EPSTP OUTPUT.
000060
000070 CALL FUNCTION 'ME_ITEM_CATEGORY_OUTPUT'
000080 EXPORTING
000090 PSTYP = EBAN-PSTYP
000100 IMPORTING
000110 EPSTP = RM06B-EPSTP
000120 PTEXT = T163Y-PTEXT.
000130
ENDMODULE.
Contenuto campi sistema
Cmpo SY Contenuto.................... Cmpo SY Contenuto....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY VU
SY-UCOMM
SY-TITLE Richiesta d'acquisto mod.: Riepilogo pos.
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Richiami/eventi attivi
N..... Tipo........ Nome..........................
Programma
Include Riga
Classe
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
Variabili selezionate
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
DIEN DIEN
4444
495E
EBAN-PSTYP 0
3
0
LIM LIM
4442
C9D0
RM06B-EPSTP
2
0
POTE TXP
5552
4800
T163Y-PTEXT Standard
57666676222222222222
341E4124000000000000
Chiamate applicazione
Il dump non riporta informazioni relative
Informazioni applicazione
Il dump non riporta informazioni relative
Note interne
The termination occurred in the function "dynpconv.c" of the SAP
Basis System, specifically in line 701 of the module
"//bas/640_REL/src/krn/dynp/dybas.c#4".
The internal operation just processed is "ENDM".
The internal session was started at 20071128021215.
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system ........ "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database user ID......... "SAPR3"
Rich. attivi nel nucleo SAP
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x11dd952a0
=> Stack address = 0xfffffffffffa920
=> Stack low = 0xfffffffffffa920
=> Stack high = 0xffffffffffff910
=> Stack Trace:
AixStack() at 0x1000206bc
CTrcStack2() at 0x1000207b4
rabax_CStackSave__Fv() at 0x1001520d4
ab_rabax() at 0x10014ef04
dyHandleError() at 0x1005a6850
dypcnvoXt() at 0x100cbd6cc
dynplend() at 0x1010cf268
dynpmcal() at 0x1010c6f60
dynppbo0() at 0x1010c5134
dynprctl() at 0x1010ce40c
dynpen00() at 0x100bd0c30
Thdynpen00() at 0x1000a1f7c
TskhLoop() at 0x1000a5298
tskhstart() at 0x1000bb0d8
DpMain() at 0x101579ca0
nlsui_main() at 0x10154d428
__start() at 0x1000002fc
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
Lista dei programmi ABAP in oggetto
Tipo
Programma
DataGen Ora
Dim.car.
Prg
SAPMM06B
25.09.2007 16:07:55
514048
Prg
SAPMSSYD
05.06.2002 17:09:33
16384
Prg
SAPFSYSCALLS
14.02.2002 14:22:47
6144
Typ
T160
12.05.1997 15:22:15
2048
Prg
SAPFMMEX
18.11.2007 09:34:59
177152
Typ
TSTCT
14.02.1998 14:31:34
2048
Typ
TMED
27.08.1994 21:59:16
2048
Typ
TPRG
14.02.1998 14:06:12
2048
Typ
T160D
11.02.2000 14:20:36
5120
Typ
T160V
14.05.1998 22:44:11
6144
Typ
T168T
28.08.1997 09:05:04
2048
Prg
SAPLMEXF
18.11.2007 09:35:00
166912
Typ
T162
02.10.2001 13:56:13
2048
Prg
SAPLSTUP
17.06.2004 12:05:43
65536
Prg
SAPLCNDP
17.06.2004 15:06:47
163840
Prg
SAPFGUICNTL
09.01.2003 17:18:52
20480
Prg
SAPLOLEA
17.06.2004 15:12:42
78848
Prg
SAPLSGUI
09.01.2003 17:15:12
31744
Prg
SAPLSTTM
17.06.2004 15:08:30
75776
Prg
SAPLSBDC
07.01.2003 18:31:25
38912
Prg
SAPLSFES
17.06.2004 15:15:58
174080
Prg
SAPLURFC
17.06.2004 14:25:28
16384
Prg
SAPLSPLUGIN
14.02.2002 14:22:48
6144
Typ
SWCBCONT
15.11.2000 17:55:11
3072
Typ
OLE_VERBS
04.04.1995 16:02:20
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Prg
SAPLSCNT
14.02.2002 14:22:47
24576
Prg
SAPSHDTV
17.06.2004 11:46:16
28672
Typ
EBANW
17.06.2004 15:55:16
21504
Prg
CL_CONTEXTFIELD_MM============CP
25.09.2007 16:07:49
9216
Prg
/1BCDWBEN/SAPLMEN0000
18.11.2007 09:35:16
237568
Prg
SAPLSENA
17.06.2004 14:19:40
28672
Typ
EBAN
13.11.2006 11:19:59
20480
Prg
CL_PROCESS_STATE_MM===========CP
25.09.2007 16:07:50
16384
Prg
SAPLSWUG
17.06.2004 14:22:25
53248
Typ
SWCONT
04.04.1995 16:18:01
2048
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
2048
Prg
CL_GOS_MANAGER================CP
11.04.2001 13:02:00
17408
Prg
CL_GOS_VIEW_MANAGER===========CP
24.01.2002 20:31:22
22528
Typ
SIBFLPOR
15.11.2000 17:53:54
2048
Typ
SGOS_MVOBJ
24.07.2001 09:18:06
3072
Typ
BORIDENT
28.08.1997 08:38:50
2048
Prg
SAPLSUU1
17.06.2004 15:13:06
165888
Typ
USR02
17.06.2004 15:05:37
7168
Typ
USREFUS
07.01.2003 18:24:17
2048
Typ
SIBFLPORB
15.11.2000 17:53:55
2048
Prg
CL_GOS_TOOLBOX_MODEL==========CP
17.06.2004 15:04:37
38912
Typ
SGOS_MODL
24.07.2001 09:18:05
4096
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSWOR
17.06.2004 15:08:55
270336
Typ
SWOTRI
03.01.1996 15:29:13
2048
Typ
SWOTRETURN
20.08.1998 10:59:29
3072
Prg
SAPLSWOH
14.02.2002 14:22:48
7168
Typ
SWOTENV
11.02.2000 14:20:34
4096
Typ
TOJTD
15.11.1995 03:08:46
2048
Prg
SAPLRHS0
14.02.2002 14:22:47
11264
Prg
SAPLSDIFRUNTIME
17.06.2004 14:20:44
82944
Typ
DFIES
09.11.2000 14:07:05
8192
Typ
X031L
15.11.2000 18:03:28
5120
Prg
SAPLSDNT
17.06.2004 12:06:43
199680
Prg
SAPLSUGS
21.11.2002 10:20:02
29696
Typ
TOJTD
15.11.1995 03:08:46
2048
Typ
TOJTB
14.02.1998 14:02:55
8192
Typ
SWOTLI
04.04.1995 17:30:59
2048
Typ
T100
28.08.1997 09:04:45
2048
Prg
CL_EXITHANDLER================CP
17.06.2004 15:04:37
26624
Prg
CL_ABAP_TYPEDESCR=============CP
17.06.2004 14:19:33
21504
Prg
CL_ABAP_ELEMDESCR=============CP
17.06.2004 14:19:13
18432
Prg
CL_ABAP_DATADESCR=============CP
17.06.2004 14:19:13
14336
Prg
CL_ABAP_REFDESCR==============CP
17.06.2004 14:19:33
16384
Prg
CL_ABAP_STRUCTDESCR===========CP
17.06.2004 14:19:33
19456
Prg
CL_ABAP_COMPLEXDESCR==========CP
17.06.2004 14:19:13
13312
Prg
CL_ABAP_TABLEDESCR============CP
17.06.2004 14:19:33
17408
Prg
CL_ABAP_CLASSDESCR============CP
17.06.2004 14:19:33
23552
Prg
CL_ABAP_OBJECTDESCR===========CP
17.06.2004 14:19:33
25600
Prg
CL_ABAP_INTFDESCR=============CP
17.06.2004 14:19:13
19456
Prg
CL_ABAP_SOFT_REFERENCE========CP
29.03.2001 16:42:12
7168
Prg
CL_ABAP_REFERENCE=============CP
14.02.2002 14:22:46
6144
Prg
IF_EX_GOS_SRV_SELECT==========IP
04.12.2000 16:22:18
4096
Prg
%_CABAP
07.01.2003 18:31:23
23552
Typ
SXS_INTER
30.11.1998 15:55:16
2048
Prg
SAPLSEXV
17.06.2004 15:04:40
106496
Prg
CL_BADI_FLT_DATA_TRANS_AND_DB=CP
17.06.2004 15:04:37
33792
Typ
SXS_ATTR
20.08.2001 12:23:27
4096
Typ
V_EXT_ACT
09.11.2000 14:27:05
2048
Typ
SXC_EXIT
09.11.2000 14:23:43
2048
Prg
CL_EX_GOS_SRV_SELECT==========CP
17.06.2004 15:04:37
13312
Prg
%_CSXRT
17.06.2004 15:04:37
11264
Prg
CL_EXIT_MASTER================CP
17.06.2004 15:04:37
13312
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Prg
SAPLBDLS
17.06.2004 11:45:48
176128
Typ
T000
11.09.1997 10:17:18
4096
Typ
SWOTRTIME
14.02.1998 10:19:46
3072
Prg
%_CSWOB
14.02.2002 14:22:46
13312
Typ
SWOTINVOKE
14.02.1998 10:18:40
6144
Typ
SWOTLV
04.12.2000 14:59:45
10240
Prg
SAPLSWCD
17.06.2004 15:06:55
78848
Prg
RBUS2105
13.11.2006 11:20:02
57344
Prg
CL_GOS_PUBLICATION============CP
13.11.2000 16:31:37
15360
Prg
SAPLSGOSHIST
17.06.2004 14:23:50
46080
Typ
EBKN
16.06.2004 13:09:57
9216
Typ
T161
16.06.2004 13:14:35
5120
Typ
T161T
14.02.1998 10:55:58
2048
Typ
CMMDA
18.09.2001 10:02:31
4096
Prg
SAPLMMDA
04.09.2006 11:00:54
65536
Typ
TWLAD
13.08.1997 14:04:45
2048
Typ
TTXID
27.08.1999 17:40:33
3072
Prg
SAPLSTXD
17.06.2004 15:06:22
347136
Typ
STEXTNAME
18.09.2001 10:03:52
1024
Typ
STXDRID
26.02.1999 14:48:42
2048
Typ
STXDRLANG
26.02.1999 14:48:42
2048
Typ
STXDRNAME
26.02.1999 14:48:42
2048
Typ
STXDROBJ
26.02.1999 14:48:42
2048
Typ
THEAD
09.11.2000 14:15:08
6144
Prg
CL_ABAP_CHAR_UTILITIES========CP
07.01.2003 18:31:23
11264
Typ
STXH
17.06.2004 14:15:46
6144
Typ
TCATALOG
25.05.1998 12:19:20
3072
Typ
T168F
27.05.1992 20:16:27
3072
Typ
T168
27.05.1992 17:53:38
3072
Prg
SAPLMECCP
25.09.2007 16:07:53
39936
Prg
CL_BADI_MM====================CP
08.01.2003 16:43:11
9216
Prg
%_CCXTAB
14.02.2002 14:22:46
6144
Prg
SAPLEINH
25.09.2007 16:07:53
56320
Typ
T001W
16.06.2004 13:14:17
9216
Prg
SAPLVDAT
19.02.2002 12:59:51
25600
Typ
T163Y
28.08.1997 09:05:01
2048
Prg
SAPCNVE
14.02.2002 14:22:47
6144
Prg
SAPLOMCV
17.06.2004 10:54:26
16384
Prg
CL_EX_BADI_MATN1==============CP
17.06.2004 10:27:52
22528
Prg
IF_EX_BADI_MATN1==============IP
17.06.2004 10:53:59
4096
Typ
TMCNV
24.02.1999 03:33:25
3072
Typ
RM06B
17.06.1998 03:23:02
10240
Lista tabelle interne
Il dump non riporta informazioni relative
Indice delle tabelle applicative
Programma
Nome................ Contenuto..1.......2........3........4........5....+....
SAPMM06B
SYST |00000000000x010000000000000000
EBAN |300001100895000010NB B NB 1 Elena Varett20071
*EBAN | 00000 00000
EBKN | 0000000 00000000 000000x0C
AEBAN |3000011008950NB BBEUR |
EBANW |300001100895000010NB B NB 1 Elena Varett20071
RM06B | 00000000000000000010 00
*RM06B | 00000000000000000000 00
RM06E | 000000000000000 00000000 00000
TPRG |300IW2Formato settimana Sett. |
T001W |3006 PIATTAFORMA DI LEINI' 6 CEDI6 0000000
T023 |
T024 |
T160 |300ME52 VB B |
T160V |300C1XX A XX X X |
T161 |300BNB 000100102NBB NB 00000
T161T |300INB BRichiesta d'acquisto|
T168 |300B AB *** 1 106 0x0C0x0C0x0C0x0C|
T168F |300B AB XXX |
T168T |300IB0106002 |
TTXID |EBAN B04 X
T163K | |
T163Y | Standard |
T001L |
T160D | XXXXXXXXXXXXXXXXXXXXXX
T161E | |
SAPFMMEX
TMED |300BB |
SAPLMEXF
T161 |300BNB 000100102NBB NB 00000
T162 |300PT0B ...................................
SAPLSUU1
USR02 |300CONSULENTI ÷x9Fw'x97[æÆ0000000000000000A
USREFUS |300CONSULENTI
SAPLSWOR
TOJTB |BUS2105 XI RBUS2105
SWOTLV |BUS2105 EXISTENCECHECK M
TOJTD | |
SAPLBDLS
T000 |300Mandante produzione Arenzano EUR
SAPMM06B
*RM06E | 000000000000000 00000000 00000
MARA | 00000000 00000000
T006 | 00 00000000000000x0C 0
SAPLVDAT
TPRG |300IW2Formato settimana Sett. |
SAPLOMCV
TMCNV |300MATCONV 0x120000000x12
Directory delle tabelle applicative (inf. di gestione)
Programma
Nome.......................... tempo..........lungh....
SAPLOMCV
SYST 20010612125650 00002404
EBAN 20061113111959 00000892
*EBAN 20061113111959 00000892
EBKN 00000421
AEBAN 20000323224119 00000027
EBANW 00000896
RM06B 20000323224119 00000529
*RM06B 20000323224119 00000529
RM06E 20020124202505 00001154
TPRG 20000323231030 00000032
T001W 20040617141548 00000338
T023 20040616131428 00000102
T024 20040616131429 00000352
T160 00000035
T160V 00000050
T161 20040616131435 00000095
T161T 00000029
T168 00000035
T168F 00000044
T168T 00000013
TTXID 00000058
T163K 20000323230840 00000023
T163Y 00000026
T001L 20000323230832 00000069
T160D 00000069
T161E 20000323230840 00000025
SAPFMMEX
TMED 00000010
SAPLMEXF
T161 00000095
T162 00000234
SAPLSUU1
USR02 00000226
USREFUS 00000067
SAPLSWOR
TOJTB 00000453
SWOTLV 00000701
TOJTD 00000033
SAPLBDLS
T000 00000107
SAPMM06B
*RM06E 20020124202505 00001154
MARA 20071118093457 00001118
T006 20001109142345 00000080
SAPLVDAT
TPRG 00000032
SAPLOMCV
TMCNV 00000062
Blocchi di contr. CONT ABAP
Include Riga Codice sorg.
Ind. Nome FI Co Par01 Par2. Par3. Par4. Tab.
MM06BO0R_RM06B-EEIND 25 EXIT.
2502 BRAX 00
MM06BO0R_RM06B-EEIND 27 ENDSELECT.
2503 BRAX 00
2504 SQLS 08
MM06BO0R_RM06B-EEIND 31 ENDMODULE.
2505 ENDM 00
2506 -
MM06BO0R_RM06B-EPSTP 7 CALL FUNCTION 'ME_ITEM_CATEGOR
2507 FUNC 00
2508 FUNC 00
2509 PAR2 02 0336
2511 FUNC 10
2512 PAR2 01 03B9
2514 PAR2 01 03BA
2516 FUNC FF
MM06BO0R_RM06B-EPSTP 14 ENDMODULE.
>>>>> ENDM 00
2518 -
MM06BO0V_VRTKZ 6 CASE EBAN-VRTKZ.
2519 BREL 04
MM06BO0V_VRTKZ 7 WHEN '1'.
2520 when 00 02 0090
2522 BRAN 02
2523 BRAX 00
MM06BO0V_VRTKZ 8 RM06B-MKNTW = '3 '. "3 Nachkom
2524 MOVL 00 02 0136
MM06BO0V_VRTKZ 9 WHEN '2'.
2526 BRAX 00
Fine dell'analisi err. run-time
Help me.
Thank youHello Maurizio,
Thre screen field EBAN-MENGE is unable to handle a sign along with the value.
Regards,
Ammey Kesarkar -
Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors ASSERTION_FAILED
Date and Time 13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
involving the ASSERT statement that should not occur. A runtime error
occurred, either because there was no activation ID entered or because
the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
of the first 8 fields is as follows:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
"/SAPAPO/TIMESTAMP_DIFFERENCE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
Network address.......... "172.16.10.47"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "0002BFAAD700"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "scmprd"
Database type............ "ORACLE"
Database name............ "SCP"
Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Jan 18 2006 20:47:39"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 196923232
Heap..................... 0
Page..................... 98304
MM Used.................. 186636840
MM Free.................. 1895288
SAP Release.............. "640"
User and Transaction
Client.............. 950
User................ "SCMATP"
Language key........ "E"
Transaction......... "/SAPAPO/CCR "
Program............. "/SAPAPO/SAPLTIMESTAMP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
"/SAPAPO/TIMESTAMP_DIFFERENCE".
The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
program "/SAPAPO/LTIMESTAMPU08"
of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
610).
Source Code Extract
Line SourceCde
31 lv_time_int_low TYPE i,
32 lv_timediff_int TYPE i,
33 lv_datediff_int TYPE i,
34 lv_time TYPE t,
35 ls_time TYPE tstr_timestr.
36
37 * check timestamp parameter
38 * ASSERT NOT iv_timestamp_high IS INITIAL.
39 * ASSERT NOT iv_timestamp_low IS INITIAL.
40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
41 IF iv_timestamp_high IS INITIAL
42 OR iv_timestamp_low IS INITIAL.
43 RAISE invalid_parameter.
44 ENDIF.
45 IF iv_timestamp_high < iv_timestamp_low.
46 RAISE invalid_parameter.
47 ENDIF.
48
49 * prepare timestamps
50 * .. split into date and time integers
51 ls_timestamp_high = iv_timestamp_high.
52 lv_date_int_high = ls_timestamp_high-date.
53 lv_time_int_high = ls_timestamp_high-time.
54 ls_timestamp_low = iv_timestamp_low.
55 lv_date_int_low = ls_timestamp_low-date.
56 lv_time_int_low = ls_timestamp_low-time.
57
58 * .. calc date diff
59 * .. check against max. allowed integer difference
60 lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>> ASSERT lv_datediff_int <= lc_datediff_intmax.
62
63 * calc time diff
64 lv_timediff_int = lv_time_int_high - lv_time_int_low.
65 IF lv_timediff_int < 0.
66 ADD 86400 TO lv_timediff_int.
67 SUBTRACT 1 FROM lv_datediff_int.
68 ENDIF.
69
70 * calc total duration
71 lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
72 lv_time = lv_timediff_int.
73 ls_time = lv_time.
74 ls_duration-hours = lv_duration_int DIV 3600.
75 ls_duration-minutes = ls_time-minute.
76 ls_duration-seconds = ls_time-second.
77
78 ev_duration_packed = ls_duration.
79 ev_duration_integer = lv_duration_int.
80 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION /SAPAPO/SAPLTIMESTAMP /SAPAPO/LTIMESTAMPU08 61
/SAPAPO/TIMESTAMP_DIFFERENCE
4 FORM /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3F17 349
COMPARE_ORDER_HEADER
3 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U03 125
/SAPAPO/CIF_DELTA3_COMP_ORDER
2 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U01 871
/SAPAPO/CIF_DELTA3_COMP
1 EVENT /SAPAPO/CIF_DELTAREPORT3 /SAPAPO/CIF_DELTAREPORT3 189
START-OF-SELECTION
Chosen variables
Name
Val.
No. 5 Ty. FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No. 4 Ty. FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254544445444543222222222222222222
F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3EDear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen. -
How to choose RT System at Run Time
Variations of this question have been asked, but I'm not sure if they've been answered.
We use LabVIEW RT to do a variety of behavior tests. We have multiple experimenters using the same hardware, and each has his/her own set of "What I want to do" requirements.
Originally, we used LabVIEW 7.0 (i.e. Before Project) to develop a Host and Remote (PXI) application. The Host application was built as an .EXE, while the Remote was saved as an .LLB, copied to the PXI, and "invoked" at Run Time by calls to VI Server. Note that this means that the code on the Remote might (is?) not be as compact, efficient, or optimized as if we had built an .EXE. But we definitely can have Bob's Experiment, Jane's Experiment, and Joe's Experiment on the PC (as separate executables), and each could respectively call Bob's RT, Jane's RT, or Joe's RT on the PXI at run time. No need to have LabVIEW (or LabVIEW expertise) on this system, and Bob, Jane, and Joe can be "ordinary users".
"Modern LabVIEW" takes a slightly different (and probably better) view towards Real-Time -- both the Host and Remote programs are built as Executables (the RT is built as an .RTEXE). We can "pre-deploy" the RT code to the PXI, and set it to run at Startup. This makes getting the RT side "running" semi-automatic -- all you need to do (if it isn't running) is reboot the PXI.
But what if you want Bob, Jane, and Joe's version, selectable by running (on the Host) Bob, Jane, or Joe's Host application?
I'm playing with the following algorithm, which seems to work. I'm presenting it here to get feedback, especially if there is a "better way" to do this.
The key to this method is that there is an .INI file on the Remote, C:\ni-rt.ini, that contains, among other things, the RT Target's Startup Application path (by default, this is C:\ni-rt\startup\startup.rtexe).
Consider three Projects, Project Bob, Project Jane, and Project Joe. Within each Project, a Host executable is built having a name like "UI Bob" (or "Jane" or "Joe"), while the Target executable is given the name "RT Bob" (or "Jane" or "Joe"). The three .RTEXE files are copied to the Target and placed in the Startup folder, C:\ni-rt\startup.
Now run one of the Host executables. It does the following:
FTP a copy of C:\ni-rt.ini from the Target to itself.
Get the name of the Startup .RTEXE.
If it is the "appropriate" name (i.e. if the Host program is UI Bob.exe, the Remote should be RT Bob.rtexe), do nothing, as the Target is already running the right code.
Otherwise, we need to force the Target to run the correct Target code. We can do this by changing the Startup entry in the .INI file to the Remote code we need (for example, RT Bob.rtexe), then tell the Remote to Reboot. When it comes back, it will be running the appropriate RT code.
The Host now goes ahead and tries to connect to the Remote. If a connection cannot be established (for example, the Remote code might have stopped), a Reboot of the Remote might fix things up.
Short of trying to write a single enormous program that encompasses every experimental scenario and situation (i.e. have a big Case Statement with a Bob, Jane, or Joe "choice", and a single executable that had everyone's code in it), this seemed to be a fairly simple way to have the robustness of compiled executables on both the Host and Remote machines, yet maintain the flexibility to let the (non-LabVIEW-guru) User choose which executable to run.
I haven't fully deployed this system -- I'm currently at "Proof-of-Concept" stage, but I've got the various "pieces" working. Does this seem like a sensible appropach? Are there other, simpler, ways to accomplish this?
Bob SchorHey Bob.
So I assume you're -completely- working with built executables? You're not going to work in the editor environment to modify your projects at all?
If this is the case, then having a generic deployment phase at the beginning of the executable (with a "setting up hardware for your app" splash screen) isn't a bad idea -
Check the binary on the target, ensure it matches the binary you have on the host machine (in case you ever decide to update).
If they don't match, FTP the new file down to replace the old one.
FTP the ni-rt.ini file, ensure the startup exe is enabled and is pointing to the correct location.
If it's not enabled or not pointing to the correct startup file, modify the .INI file and FTP back to the target.
If you had to update the INI file, ask target to reboot itself. Wait 30 seconds, and wait for target to become available again.
Connect to the target. If you cannot connect, reboot target. If the target comes back and you still cannot connect to the app, notify user.
That's almost exactly how we handle installation and deployment via MAX.
The big assumption here is that the built executables were all built with the same version of LabVIEW Real-Time. If not, you'd need a system replication step in there to make sure the proper version of LabVIEW is on the target before launching the built .rtexe.
-Danny -
Hi guys,
I am executing an alv grid report.i m getting a run time error and i m gettig a dump.In the below i pasted the error.any suggestions where i m going wrong in the code.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Information on where terminated?
Termination occurred in the ABAP program "SAPLSLVC" - in "FILL_DATA_TABLE"
The main program was "ZRPP1353 ".
In the source code you have the termination point in line 2735
of the (Include) program "LSLVCF36".
Source code where the error occured?
Column per Fieldcat Entry
ls_lvc_data-value = space.
clear ls_lvc_data-style.
loop at it_fcat_local assigning <ls_fcat>
where tech ne 'X' and no_out ne 'X'.
if l_invisible eq 'X'.
clear l_invisible.
if <ls_fcat>-do_sum is initial.
continue.
else.
clear ls_lvc_data-col_pos.
endif.
endif.
add 1 to ls_lvc_data-col_pos.
assign component <ls_fcat>-fieldname
of structure <ls_data> to <l_field_value>.
if sy-subrc ne 0.
message x000(0k).
endif.Hi Dinesh,
This is because of some problem with the field catalog you have defined. Please give the field catalog so that we can identify the problem easily. -
Run time Error while Creating Expense request
Dear Friends ,
In E-Payment ( Expense Claim ) creation , While clicking on Enter Receipts application is going to run time error for only one user.
Run time Error Info :
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LR_CONTEXT_ELEMENT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
"CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
"PRESET"
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
in "PRESET".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 60
of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
in the RAISING clause of its signature.
The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
code begins in line
1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
Regards,
Suresh .Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath -
Run time error while running BDC for production order creation and confirmation:
Dear Gurus,
We have a situation, where the users are trying to do the entries creation of order or confirmation (through manual and BDC). But, if there is any kind of a deficit quantities in consumption or GR quantity, then it is going to run time error and Dumps are coming in program SAPLCORB
and the transaction code is coming for CO11N.
How to avoid this error to run the production system in smoothing way...Any flash lights on this will be great full
Regards,
Madhu.GHi Madhu,
Expert Caetano has rightly point out. Refer Note 1840705 - RAISE_EXCEPTION short dump if running CO11N in background
Cause
The short dump is triggered because SAP transaction CO11N contains new GUI elements that cannot always be dealt with in a background process,
such as the confirmation texts.
Resolution
SAP recommends that the standard production order BAPIs, such as BAPI_PRODORDCONF_CREATE_TT, should be used to post a confirmation in background.
If this is not feasible, the following workaround may be uses:
Define a confirmation profile in transaction OPK0;
In the detail areas, remove the area "Confirmation text";
Set this profile as standard, so that it is chosen automatically by the system when a batch-job
is started;
Assign this confirmation profile to the batch user with transaction SU3 using parameter CORUPROF.
Also see Note 429432 - CO11N: Batch input in background dumps if long text is maintained
Refer to note 1154692 - Endless loop during confirmation in background if you doing Auto GR during confirmations
Thanks & Regards,
Ramagiri -
Run-time error SAPSQL_ARRAY_INSERT_DUPREC occurred
When creating a new SyncBo (T51) instance after syncing eventually MI Clients shows the following message:
[20070315 01:28:14:343] E [MI/Sync ] Received exception info code 10 and detailed message "Exception while callSync: The ABAP/4 Open SQL arrayinsert results in duplicate database records. records in the data base."
In sm21 shows message:
AB0 Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
AB1 > Short dump "070316 205056 sapnw ELDA " generated
Looking for SAPSQL_ARRAY_INSERT_DUPREC error in SAP Note we found the note 817849 (Runtime error SAPSQL_ARRAY_INSERT_DUPREC occurs during sync).
We have downloaded and applied this note in Backend as note requires and ALL prerequisites of this note. Also we have upgraded to SP19 and Kernel to 155 (part 1 and 2). But problem continues and the client that happened this problem does not work any more, all new SyncBO instances created goes to MEREP_MON as Waiting status.
The dump on duplicate record is happening when the user is synchronizing and when a record is getting inserted to table merep_10100.
The solution /workaround could be to do a client reset for those devicesand test again and see if it is happening, but error returns happening after this.
When this happen SyncBo instance keeps on Waiting status (MEREP_MON). We couldn't understand why this happen suddenly and then no more new SyncBo could be created, all goes to Waiting status. Reprocess (ShiftF5) or start handler (Shift10) does not take any effect.
Best Regards,
RogérioHi Ajith
I am getting the same error and below is the error message from ST22. The only change is I am using for MTR application and the sync fails for the 2nd time when synched for patches for the MTR application. As it is generic sync, could you please advice to get rid of the problem.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"LOG_INSERT_DB" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Thanks, Raj -
Run time error while saving sales order
Hi all,
i am working on IDES ECC 6.0, when i am saving an sales order(OR) i am getting run time error in the table CRMPAROLTP, program SAPMV45A.
i am using 4 GB RAM, still having a space of 30 GB for only IDES to save the data.
so, how to solve it.Hello,
I doubt the runtime error (I am assuming you mean that you got a short dump) you mentioned in your original post has anything to do with the warning messages you see when doing a check (Ctrl+F2) on table CRMPAROLTP and program SAPMV45A. These warnings should not cause a short dump or runtime error.
The warning message for the table has the following long text:
Table CRMPAROLTP: Key length > 120 (Restricted functionality)
Message no. DT214
Diagnosis
The key length, i.e. the sum of the field lengths of all the key fields of the table, is more than 120 bytes.
System response
This is a warning.
Procedure
Note the following restricted fuctionality for this table:
- Table contents cannot be transported by specifying key values, at
best by specifying generic key values with a maximum length of 120
bytes.
- The table may not be used as the base table of a lock object.
The warnings in SE38 for program SAPMV45A are mostly related to Unicode and have no reference to the table CRMPAROLTP.
If you haven't already done so, please check the SAP Note referenced in my first reply since this does provide a solution for short dumps related to table CRMPAROLTP.
Of course, since I don't know specifically what the short dump message is that you received, I could be basing my assessment on false assumptions. If you have those details it is better for the SDN community as a whole if you include the information in this thread instead of sending it to me offline.
Best Regards,
Jamie -
While doing SO, im getting run time error - reg;
Hi,
While doing sales order and whenever im doing save its getting runtime error.
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
Short dump has not been completely stored (too big)
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Maintain the current CRM release (table CRMPAROLTP)
Long text of error message:
Diagnosis
Various transfer errors occur when transferring SAP sales orders to
CRM or there is no status update or the status update has errors
when transferring from CRM to the SAP system. This is caused by an
incorrect entry for the CRM release in the SAP table CRMPAROLTP, or
no entry is maintained at all.
System Response
To avoid data inconsistencies, this message causes a short dump.
Procedure
Maintain table CRMPAROLTP in your SAP system as is described in SAP
Note 691710 and then repeat the process again.
Procedure for System Administration
Technical information about the message:
Message class....... "V3"
Number.............. 302
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
hort dump has not been completely stored (too big)
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPMV45A" or "MV45AF0B_BAPIDATEN_ERMITTELN"
"BAPIDATEN_ERMITTELN"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "personal"
Network address...... "192.168.2.11"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "PERSONAL"
Database type..... "ORACLE"
Database name..... "GCU"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 75
Patch text.. " "
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
hort dump has not been completely stored (too big)
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 30311496
Heap.... 0
Page.... 139264
MM Used. 14538320
MM Free. 91952
User and Transaction
Client.............. 100
User................ "INFO_SD"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPMV45A"
Screen.............. "SAPMV45A 4001"
Screen line......... 65
Information on where terminated
Termination occurred in the ABAP program "SAPMV45A" - in "BAPIDATEN_ERMITTELN".
The main program was "SAPMV45A ".
In the source code you have the termination point in line 338
of the (Include) program "MV45AF0B_BAPIDATEN_ERMITTELN".
Edited by: kiran35086 on Dec 14, 2011 6:30 AMDear kiran,
This might be many reasons.If you have not done configuration properly system will take you to dump(Run time error).
Try read the diagnosis possibly you may understand the problem.
If not You coordinate with your technical team.
Thanks&Regards
Raghu.k -
Run time error while create Vendor master via MK01
Dear Experts,
when i try to create vendor master by MK01.....system throws run time error as below:
"The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CVI_MAP_TITLE=================CP' has to be
terminated."
My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
Regards
VetrivelanHii,
please search sdn before posting the threads.
check these links, it may help u............
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
CX_BADI_NOT_IMPLEMENTED
thanks. -
Run Time Error while Transferring data to Application server
Hello Abaper's,
I have generated a XML data using the FM : " SAP_CONVERT_TO_XML_FORMAT ".
While transferring the data to a File on Application Server using the statement
DATA : wa_xmltab TYPE truxs_xml_line,
it_xmltab TYPE truxs_xml_table.
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
LOOP AT it_xmltab INTO wa_xmltab.
TRANSFER wa_xmltab TO FNAME. <<<<<<<<<<<<<< Getting Error here
ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
The Run Time Error i am Facing is
Short text
The current statement is only defined for character-type data objects.
Error analysis
For the statement
"TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "TRUXS_XML_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
Regards
jvHello Volker Binder ,
Thank you . it's now transferring the data to Application sercver. I forgot to try using Binay mode,
Thers is one more problem. There are 10 Records in that internal table that is being converted to XML format,
but the XML data is showing only first 4 records.... the XML data format for the remaining data is not seen.
Actual No. of Records in Internal table :
matnr matkl meins
0-BUY1 012 PC
0-BUY2 012 PC
1 EA
2 012 L
3 01 EA
12 EA
23 001 ST
24 015` EA
28 010 EA
29 015` AU
XML Format for the above 10 fields is :
<?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
PC </MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
This 4th record data in XML is also incomplete..
The above XML format is generated only for 4 records out of 10 Records.
Please let me know , how can i increase the Size / Memory of the Application server file to accomodate for the reamining Records
Regards
Jv -
Dear ALL,
When we are creating sales order after entering sold-to-party, Material & Quantity when we press ENTER key That time
we are getting following run time error
Hoe to resolve this?
Runtime Errors SAPSQL_INVALID_FIELDNAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 15.01.2009 16:04:19
Short dump has not been completely stored (too big)
Short text
A dynamically specified column name is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ALAND" does not exist in any of the database tables from the FROM clause.
How to correct the error
Check the field name in the SELECT clause.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_INVALID_FIELDNAME" "CX_SY_DYNAMIC_OSQL_SEMANTICS"
"SAPLV61Z" or "LV61ZU01"
"SEL_KONDTAB"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEL_KONDTAB" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "slgsap-prd"
Network address...... "10.140.1.11"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SLGSAP-PRD"
Database type..... "MSSQL"
Database name..... "PRD"
Database user ID.. "prd"
Terminal................. "SD0123l"
Char.set.... "C"
SAP kernel....... 700
created (date)... "May 6 2008 00:13:21"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 159
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 20949200
Heap.... 0
Page.... 196608
MM Used. 15928048
MM Free. 828016
User and Transaction
Client.............. 900
User................ "ADMIN"
Language key........ "E"
Transaction......... "VA01 "
Transactions ID..... "03F0E2DD6B35F16CBBFF002219897F24"
Program............. "SAPLV61Z"
Screen.............. "SAPMV45A 4900"
Screen line......... 930
Information on where terminated
Termination occurred in the ABAP program "SAPLV61Z" - in "SEL_KONDTAB".
The main program was "SAPMV45A ".
In the source code you have the termination point in line 672
of the (Include) program "LV61ZU01".
The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
occurred in
procedure "SEL_KONDTAB" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLV61Z "; its source code begins in line
260 of the (Include program "LV61ZU01 ".
Source Code Extract
Line SourceCde
642 if se_prestep = yes or
643 se_read_only_one_record = yes.
644 if t681-ksdat is initial.
645 if se_read_all_prestep is initial.
646 select * from (t681-kotab) appending table <cond_tab>
647 up to 1 rows
648 where kappl = se_kappl
649 and kschl = se_kschl
650 and (coding_tab).
651 h_subrc = sy-subrc.
652 else.
653 select * from (t681-kotab) appending table <cond_tab>
654 where kappl = se_kappl
655 and kschl = se_kschl
656 and (coding_tab).
657 endif.
658
659 * it is enough to find one record in prestep
660 * (care must be taken with pool tables - depending on database this
661 * will cost performance instead of saving)
662 if select_split ne 0 and h_subrc ne 0.
663 modify coding_tab from coding_alter index select_split.
664 select * from (t681-kotab) appending table <cond_tab>
665 up to 1 rows
666 where kappl = se_kappl
667 and kschl = se_kschl
668 and (coding_tab).
669 endif.
670 else.
671 if se_read_all_prestep is initial.
>>>>> select * from (t681-kotab) appending table <cond_tab>
673 up to 1 rows
674 where kappl = se_kappl
Regards,
Akshay
Edited by: Akshay Dalal on Jan 17, 2009 6:25 AM
Edited by: Akshay Dalal on Jan 17, 2009 6:30 AMDear Akshay,
We will NOT be able to provide you with a solution on this forum, because we have no clue what configuration do you have in your system and what user exits or other custom development may have been done in your specific system.
Lakshmipathi has already correctly pointed to a similar post. You might want to get an ABAPer to set a breakpoint just before the error occurs, then he/she might provide you with more information, which may (or may not) be helpful.
There is obviously something wrong in the pricing condition either on configuration level or in a user exit. If you write to SAP (which you should, because it's a standard program), they will ask to connect to your system, because they don't have any chrystal balls over there either.
Just in case - before going any further, try running the program RV80HGEN (in the test system, of course), which re-generates requirements and formulas. Sometimes it helps, although I doubt that it is the case here.
Also if you've used some custom (Z...) fields in the pricing configuration, that's where the problem is most likely.
Maybe you are looking for
-
How can I tell if time machine is backing up my user folder?
I use time machine, but I'm worried that my user library folder (containing my Mail folders) isn't being backed up. I can't see it when I browse the time machine folders, but then again, I can't see my user library on my dard drive without using the
-
Is there a generic way to get sequence
Hey, I need a counter that will not initialized when my sever restarted, so i decide to write sequence in the data base for this. My question is there a generic (for any vendor) way to get next id? Thank you
-
Can change work-space background color without effect on HTML?
I'd like to have a dark work-space background-color (for the design part of the interface) when I work in my included files, instead of the default white. Can I have it without setting a true CSS that affects the real appearance of the page?
-
Migrating from WebSphere 5.1
Does the tool support WebSphere 5.1? I tried running it anyway over a J2EE application in WebSphere 5.1 and it worked fine except it did not create the EJB jar file in the EAR file at all. Are there any recommendations on a work around? Thanks.
-
Can I use my iPod (30GB) as a device to store MS Word en Excel documents? Thanks!