Shortdump due to a deleted solution

I deleted a solution and when I call t-code DSWP now my user-id generates a shortdump. This is due to the fact that solution manager enters the last solution you entered. note 992894 and 1022766 doesn't solve the problem. I know that there is a report you can execute that deletes this cache once. Does someone know this report or another solution?

>
Dirk-Jan Kloezeman wrote:
> I deleted a solution and when I call t-code DSWP now my user-id generates a shortdump. This is due to the fact that solution manager enters the last solution you entered. ... I know that there is a report you can execute that deletes this cache once. Does someone know this report or another solution?
- run transaction with table DSWPUSERPREFS
- Display entries for USERID = <user-id> and PREFNAME = 'DSMOPSOLID'
- clear value for column "PREFVALUE".
- save
Best regards,
Ruediger

Similar Messages

Adobe update process fails due to Error 130200. solutions please

adobe update process fails due to Error 130200. solutions please. Shyam

Is there anything else beside the number 130200?
Try downloading the update from http://www.adobe.com/downloads/updates/
If you still need help, please tell us your operating system details.

Want to sync music from brand new computer as old one was damanged. says all my songs will be deleted. solution, please?

want to sync music from brand new computer as old one was damanged. says all my songs will be deleted. solution, please?

Do you have all of your content in that computer's iTunes library ? There are some instructions on this page for syncing to a new computer : Syncing to a "New" Computer or replacing a "crashed" Hard Drive
And if you have music on your device that wasn't purchased from iTunes and you don't have a copy of it on your new computer's iTunes then there are some programs listed half-way down this page which should be able to copy it back (iTunes will only copy iTunes downloads back from a device) : Recover your iTunes library from your iPod or iOS device

Vendor Due Date analysis ( delete posts )

delete
Edited by: Edgar Almonte on Mar 13, 2008 1:58 PM

Hi Venkatkumar,
Vendor due date analysis refers to the date on which the bill becomes due for payment based on the payment terms and base date. It gives a detailed report of all vendors whose bill have become due for payment on a particular date (Key Date).
Vendor agewise analysis refers to the grouping of amounts due to vendors for various periods, for e.g. 0-30 Days, 31-60 Days, 61-90 Days & so on.
T code for Vendor due date analysis is S_ALR_87012078 - Due Date Analysis for Open Items.
T code for Vendor agewise analysis S_ALR_87012084 - Open Items - Vendor Due Date Forecast
Thank You.
Regards,
Ameet

Server slowness issue: Due to sql delete for 8 lakhs rows

Hi. We had faced an issue like PeopleSoft server utilization went to 94 % due to a sql execution
that sql was about deleting 8 lakhs rows. I wonder will it create server slowness? deletion of 8 Lakhs rows will bring the performance down?

Hi,
Could you clarificate which kind of PeopleSoft server is it?. Does it is a Process Scheduler or Application Server? How do you find that the cause of the slowness is the execution of a SQL and which process is executing it?.
How is the performance at DB level when the SQL is executed?
Please provide more infraestructure information, like Hardware architecture and OS version.
Regards,
Andrés Caro

Performance Improvement possible due to replacing delete-command?

Dear Specialists,
has anybody of you an idea how i still could improve the performance of the following part of a program?
I was thinking if it could be helpful to avoid the deletion at the end of the pasted coding somehow...
DATA gt_knb1 TYPE HASHED TABLE OF t_knb1 WITH UNIQUE KEY bukrs akont.
IF s_bukrs[] IS INITIAL.
    SELECT akont COUNT(*) AS count FROM knb1
      INTO CORRESPONDING FIELDS OF TABLE gt_knb1        "#EC CI_NOFIRST
      GROUP BY akont.                                   "#EC CI_NOWHERE
ELSE.
    SELECT bukrs akont COUNT(*) FROM knb1 INTO TABLE gt_knb1"#EC CI_NOFIRST
      WHERE bukrs IN s_bukrs
      GROUP BY bukrs akont.                             "#EC CI_NOWHERE
ENDIF.
DELETE gt_knb1 WHERE bukrs IN s_bukrs AND akont = space.
Thanks a lot in advance
Best regards
Carsten

Manu D'Haeyer wrote:
Hi,
>
>...The ugliest part for me anyway is this
INTO CORRESPONDING FIELDS OF
... I think a dynamic internal table could help so that gt_knb1 fits exactly to the fetched rows.
>
> kr,
> m.
Hello all,
please note, the "CORRESPONDING FIELDS" is not so relevant nowadays. Few milliseconds are not going to change a picture.
Refer to this thread:
into corresponding fields of table VERSUS into table
Please stop recommending it in EACH AND EVERY thread appearing in this forum.
The correct answer is given by Volker above.
And by the way, are you really sure that your problem is in the DELETE statement? I would actually suspect the SELECT to be a time-consumer.
Regards,
Yuri

Can't log on to windows - due to Client Security Solution software

Hello,
I have quite a serious problem. When I try to log on to windows, a wizard comes up asking me to register my fingerprints, and for this I have to enter my windows password. The user and domain has been filled out already and are in greyed out boxes. When I enter my password adialogus is displayed saying that <domain>\<username> can not be created since it exists. Then I can click "Cancel" and I am logged off.
Okay, so I tried as administrator on the local pc, and was able to add fingerprints, and then I was logged off.
I tried calling support at ibm, lenovo and my local supplier - nobody wants to touch this problem, since it has nothing to do with ibm,lenovo or the local supplier :-/
It my only option really to reinstall the operating system ?
Regards...

What should I do? Should I start over and reinstall Windows 7 with the DVD that came with the computer? I can't back up my files while I'm in safe mode because the computer won't recognize my external hard drive, and the computer said that I can't back up.

Delete from the Solution database

Hi All,
Is there any procedure to delete Solutions or Problems from the Solution Database?
Thanks in advance!
Regards,
Gábor

Hi,
U need to use archiving methodology to delete data from Solution Database. Please have a look at the following link:
http://help.sap.com/saphelp_crm50/helpdata/en/a3/e40fe634874243b7917d1d6d0757c4/frameset.htm
Rajeev.

How to delete / reset a Solution Database Configuration

Hello experts,
I need to configure a solution database for the Service Desk on a client system.
The problem is, that someone did it wrong before or tried this configuration more than one time. But these configurations are not working.
Is there a possibility to delete those old configurations or reset all the settings? I would like to start the configuration wizard from the beginning and I don´t want to have all the old configurations.
I could not find yet the button "delete current solution database" or something similar.
I just want to start in a clear environment.
Any suggestions?
Thanks in advance and kind regards,
Geraldine

A little bit late but, to reset SM configuration you have to delete Solution Manager system from LMDB.
Check SAP Note 2020955 (SOLMAN_SETUP has been reset and is in "grey" status)
Regards

Service Call Solution Able to delete

Hai Experts,
In Service Call--> Solution Able to delete now...
My Actual Requirement :
Once Service Call Solution once Solution Added Can not able to delete is it possbile??

Hi,
Yes possible by transaction notification.
try this:
IF @transaction_type in ('A','U') AND (@OBJECT_TYPE='191')
BEGIN
If exists (SELECT distinct T0.[callID] FROM OSCL T0 INNER JOIN ASC1 T1 ON T0.callID = T1.srvcCallID INNER JOIN SCL1 T2 ON T0.callID = T2.srvcCallID WHERE T1.[solutionID] <> T2.[solutionID] and T0.[callID] = @list_of_cols_val_tab_del)
Begin
SET @error = 10
SET @error_message = 'Not allowed to delete solution'
End
End
Thanks & Regards,
Nagarajan

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

Nautilus Can't Be Used Now Due To An Unexpected Error

I discovered that I am getting this message almost every time that I restart X using the command Ctrl + Alt + Backspace. I have been trying to figure out my proper resolution and have been doing many of these restarts recently.
The error message in full reads:
Nautilus can't be used now, due to an unexpected error from Bonobo when attempting to locate the factory. Killing bonobo-activation-server and restarting Nautilus may help fix the problem.
I followed this advise and ran a killall on both the activation server and nautilus. things seemed to be fixed after restarting x. i have been doing a fair bit of research on this phenomenon and it appears that over time that these fixes do not work and the problem rapidly gets worse.
i have searched the arch forum for references to this problem but found none. has anyone dealt with this problem, and if so, have you managed to fix it?
some articles site success with the deletion of ~/.config file or creating a new user. i was thinking of running
pacman -Sy gnome gnome-extras etc...
in order to reinstall gnome to see if that might clear up the problem.
any help or advice that you could offer on the situation would be great. thank you!
EDIT:
I can almost say with some certainty, that this is a permission's problem. After a nautilus failure, i always have to reset sudo with sudo -K.
possible solution(s) next post:
Last edited by czechman86 (2008-05-28 23:24:46)

looks like the gtk theme is not the problem. didnt really think it was, but the documentation was worth posting. the guys over at ubuntu look as though they have dealt with this in great detail, and have produced a few solutions, which may or may not work. i have decided to post these for anyone else who may have these problems.
Solution 1 - new user creation:
https://bugs.launchpad.net/ubuntu/+bug/104521
Solution 2 - config file delete:
http://ge.ubuntuforums.com/showthread.php?t=724439
post number 6 here features the config file delete solution, as well as a link to another post which may be useful.
judging by a google search on this problem and the number of responses that came up, the bonobo/daemon error is quite a common curse for the users of gnome, although much more common in distros such as ubuntu or fedora.
i hope that this proves useful and if anyone has anything to add, please feel free. the more documentation the better.
EDIT:
another solution would be to remove gnome and reinstall it from scratch. (some please tell me if i am doing this correctly. thanks )
1. clean your catch:
pacman -Scc
2. remove gnome, gnome extras, and whatever other gnome files you might have installed
pacman -Rscn gnome gnome-extra etc...
3. reinstall gnome and gnome extras
pacman -Sy gnome gnome-extra
4. reconfigure your desktop the way you want.
Last edited by czechman86 (2008-05-28 23:42:43)

BT Vision - recordings to be deleted?

Forgive me if this has been answered elsewhere
My elderly parents have just had a phone call from 08000285085 telling them that unless they watch their recorded programs on their black BT vision box they will be deleted in 14 days. Is this correct?
I also have the same vision box but havn't had a phone call so just wondered if they understood the message correctly.
The only difference between us is that I just have the box (since 2010 I think) without subscription using it just for recording and free BBC iplayer. Dad pays a subscription for Sky Sports 1 & 2
Neither of us pay for infinity although we live in an enabled area.
Is it right then that all recordings are due to be deleted? Why?
many thanks
Solved!
Go to Solution.

Hi tattybogle18.
To answer your question:
a) because BT won't have to pay for (expensive?) Microsoft licenses to run the old software anymore, and will be able to invest the savings into more channels and content (which they seem to be in the process of doing)
b) because the old software looked like something that came out of the 90's
c) because in all likelihood the old software would not have been able to support new features like linear channels
d) etc.
Am I really the only one here who thinks the new software looks so much better than the old one?

TS2776 I used my Ipod while at the gym one day and now it's acting wacky. I have tunes that will not download due to an "unexpected error (-50). Anyone know what this is and how to fix it?

I used my Ipod while at the gym one day and now it's acting wacky. I have tunes that will not download due to an "unexpected error (-50). Anyone know what this is and how to fix it?

looks like the gtk theme is not the problem. didnt really think it was, but the documentation was worth posting. the guys over at ubuntu look as though they have dealt with this in great detail, and have produced a few solutions, which may or may not work. i have decided to post these for anyone else who may have these problems.
Solution 1 - new user creation:
https://bugs.launchpad.net/ubuntu/+bug/104521
Solution 2 - config file delete:
http://ge.ubuntuforums.com/showthread.php?t=724439
post number 6 here features the config file delete solution, as well as a link to another post which may be useful.
judging by a google search on this problem and the number of responses that came up, the bonobo/daemon error is quite a common curse for the users of gnome, although much more common in distros such as ubuntu or fedora.
i hope that this proves useful and if anyone has anything to add, please feel free. the more documentation the better.
EDIT:
another solution would be to remove gnome and reinstall it from scratch. (some please tell me if i am doing this correctly. thanks )
1. clean your catch:
pacman -Scc
2. remove gnome, gnome extras, and whatever other gnome files you might have installed
pacman -Rscn gnome gnome-extra etc...
3. reinstall gnome and gnome extras
pacman -Sy gnome gnome-extra
4. reconfigure your desktop the way you want.
Last edited by czechman86 (2008-05-28 23:42:43)

Erec - leaving action deleted internal candidate email address not working

Good morning
We have the following situation:
1. A person was made a leaver in HR with future leaving date.
2. Decision was made that the person could actually stay so the leaving action was deleted in HR.
3. In erec in SU01 person still showing as role RCF_INT however the email address (produced from IT105 subtype 0010 in HR) was blank and his Alias field populated with his employee number ie: as if he was a leaver still.
4. I have manually updated the email address in erec for his internal email address - this did not let him apply for an internal job. I then deleted it in IT105 in HR and then recreated it in IT105 - this has gone across to Erec however he still cannot apply and the Alias field is still being populated.
So erec is behaving as if he is part internal and part external! How can I stop the Alias field being populated for him and how can I then get the email address to work?
many thanks
Dawn

Hi Nicole
Thank you. The order of events was as follows:
a. On 25.01.11 a leaving action was done to start 01.04.11
b. A decision made in March that the individual could stay however the leaving action was not deleted until 08.04.11
c. This meant that he became a leaver in erec and due to subsequently deleting the leaving action he has reverted to INT_CAND (which is what we want).
I have managed to get the email address to work by deleting the IT105 subtype 0010 in HR, I then recreated it in HR and it has PFAL'd over to erecruitment so the user is now able to apply for jobs.
However the Alias field is still populated and the user has an additional employee number in erecuitment. Are you able to advise how the alias field can be depopulated?
Many thanks
Dawn

Shortdump due to a deleted solution

Similar Messages

Maybe you are looking for