Show message when not logged on

I would like to show a message (in place of the portlet) to the users who don't have the privileges to view a page or portlet, or who aren't logged on.
Can anyone help me?

Hello Steve,
Thanks for the feedback. Since this appears to be a permissions issue there's one other thing to check. When the merge modules are installed there's often an option to install for "me" or for "everyone." Make sure the files are being deployed for everyone.
Here are links to some RDC and .NET documents as well as the Statement of Direction for the RDC. I'm not sure if you'll actually be able to pull them up though. Some documents require a login for the Service Market Place in order to view them. Hopefully these will work without logging in.
[Using the Report Designer Component in Microsoft Visual Studio .NET|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0751a7f-a81d-2b10-55a0-e6df0e1bab6d]
[SAP Note 1217809 - Is the Report Designer Component supported in the .NET development environment?|https://bcp.wdf.sap.corp/sap/sapnotes/display/0001217809]
[Crystal Reports Report Designer Component - Statement of Direction|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80bd35e5-c71d-2b10-4593-d09907d95289]
I hope you're able to track down the permissions issue!
Sincerely,
Dan Kelleher

Similar Messages

Why will all the phone numbers on my phone not show up when I log into iCloud on my computer?

Why will all the phone numbers on my phone not show up when I log into iCloud on my home computer?

Hello tamivw,
I read your post and I have linked to an article that will instruct you on how to access your iCloud contacts on a computer:
This article is for Windows:
iCloud Control Panel 3.1 for Windows
http://support.apple.com/kb/DL1455
This article will help you access the iCloud preferences where you can enable contact syncing:
iCloud: Open iCloud preferences
http://support.apple.com/kb/PH12802
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Using Shared Libraries When Not Logged In

Is there a way I can use a shared library from my laptop when not logged into my iTunes account on my main computer? It kind of defeats the purpose if I have to have both iTunes running.

Yes, I'd like to be able to access my shared library from my laptop. I'd like it to function so that my home PC (which has the original library on it) does not have to be running iTunes. For times when I'm logged off or not running iTunes (because it uses a lot of the computer's memory, and other users find it quite annoying).
I'd just like to know if there are any third-party mods, software, or any other option to perform this task.

HT4623 i got apple iphone 3 and i getting problem to activate that its showing message could not activate plz help me how can i activate my phone?

i got apple iphone 3 and i getting problem to activate that its showing message could not activate plz help me how can i activate my phone?

Most likely your phone is carrier locked to a different carrier than the SIM card you're using. It will activate and operate only with the carrier to which it's locked.

For some reason I keep getting this message when I log into itunes: " itunes cannot locate the cd configuration folder, so you cannot cannot locatimport or burn cd's and dvd's. Thisimport folder must be in the same directory as itunes. " What happened?

for some reason I keep getting this message when I log into itunes: "itunes cannot locate the cd configuration folder, so you cannot import or burn cd's and dvd's." What happened?

http://discussions.apple.com/thread.jspa?messageID=3645581&#3645581

ST03N shows users accessing transactions even when not logged in

Hello all...
We are trying to determine how many times a user executed a transaction during a specific period, and are using ST03N to do this.
We get the information fine, but it shows non-system users as having accessed transactions on days they are not logged in or it shows excessive use of a transaction (i.e 8000 times in a 20 day period).
We have confirmed that no batch jobs or system jobs are running or have run under their ID's. Additionally, it shows use of transactions which the users are not authorized to use.
Please help as we are trying to explain this for SOX purposes.
Cheers all!
Joe Johnson

Thanks for the replies...
We can use AL08, but it doesn't show any user activity for the specific users that keep popping up in ST03N.
RFC calls seem to be closest to explaining this, but how can one track the calls made by a user? Additionally, if the ID is not authorized to perform a transaction shouldn't the RFC call fail?

I am getting these messages when i log to my apple ID:*This is not a Test User account.* Please create a new account in the Sandbox environment. [Environment: Sandbox]

Hello,
I wanted to ipdate my application, went to apple store inserted my password. Since then i keep on getting these messages n i can not log in to my apple ID anymore. Plz need help urgently.
*This is not a Test User account.*
+Please create a new account in the Sandbox environment.+
+[Environment: Sandbox]+

Has anyone by any chance performed a "jailbreak" on your iPhone?
Hope this helps

I keep get an "Error (-50)" message when I log into iTunes on my MAC

I didn't have this as a problem before, but all of a sudden I cannot log into my iTunes account on my MAC. When I try to go into Store and then Sign in, I get an "Error (-50)" message. I have tried going in and changing the parental controls (something I saw elsewhere), but that didn't work.
I updated both my Mac OS and itunes, but that didn't change anything. I have restarted my computer and even done a hard reset by turning it off. When I opened iTunes again, before I even did anything, it gave me and "Error (-49)" message.
Also, I have some program called Safe-Eyes on my computer as a parental control, and went in and added all the different websites associated with iTunes (per another help page), but that hasn't worked either.
Because of this, I cannot get any of my songs from iTunes Match, except those that had already been downloaded onto the computer (1/16 of my music library). Sure I can access them on my iPhone, but now I can't transfer that music onto my Nano.
One additional note: I saw on the communities the recommendation to delete your iTunes Download file, but I don't appear to have one in my iTunes Media folder.
Thanks!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Login row in my header, when not logged in

I wish to use the feature that some site use where the login
box is show in the header or some other place on the page while
they are not logged in and when they do login the box is not show
anymore.
i wish to have this as an extra table row in my header file.
i have tried to do this and it does not seem to work ok, i
would send you my files but it might be easier if you know of a
better way as this is better than maybe trying to fix my mistake?
i need this so i can use it like this.
somepagename.php
<? // somepagename.php
include("header.php");
if ($_SESSION['auth'] = "yes") {
echo("protected page");
include("footer.php");
?>
then the header.php file is...
<? // header.php
if !$_SESSION['auth'] = "yes" {
?>
<form name="form1" method="post" action="">
<div align="center">user name
<input name="username" type="text" id="username">
password
<input name="pass" type="password" id="pass">
</div>
</form>
<?
?>
this is a brief description of what i am looking for, but i
am not getting very far.
thank you for any help

Hi, drhalm.
Thank you for visiting Apple Support Communities.
This sounds like your music is not stored locally on the device and accessing your purchases in the cloud. There is a new feature in iOS 7 that shows all purchased music and requires and Internet connect to play this content. You can download any missing media via the steps in the first article below. If the media is located in your iTunes music library, you can sync the media from your Mac to your iPhone. If unfamiliar with the process, I have included the steps in the second article below.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12113
Cheers,
Jason H.

Annoying failures and reminders when not logged in as admin

how can i stop apple software update (asu) from constantly bugging me when i'm not logged in as an admin?
i like the automatic check (noone likes updating everything manually) but every apple program fails to install unless you're an admin. it would be much better if asu checked before it looked for updates, or let people know there are updates but they cannot be installed unless they are logged in as admin.
what's worse is if it downloads an update and the install fails because you're not an admin, asu downloads the whole file again when you do log in as admin. these files should be cached in a temporary folder in asu's 'program files' folder until the install is successful or a newer version is available.

freakin' awesome! of course, i never saw that scheduled task because it only shows when logged in as an admin, and apple is the only program i have that has its schedule there rather than in its own interface.
now that i have seen this it seems stupid that so many programs don't have their updates scheduled there.
i have not tested it as such but i have a task in my limited account that only runs when i'm logged on so i know that this will work. i also changed the schedule from a set time weekly to ‘at logon’ so it will actually get a chance to run.
edit by online?:
the scheduled task sets asu to run in the SYSTEM account but then asu seems to launch the installers with the locally logged on user's credentials, so this fixed my problem but not the underlying cause.

I keep getting an error message when I log onto Firefox and I can't figure out how to fix it, can you help?

Every time I log onto Firefox I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
I would like to fix whatever is causing this error message to appear, but I haven't found my, "application's profile directory" so that I can check for "read/write restrictions". My hard drive is 640GB with 554GB free space remaining.
I am running Windows 7 - 64 and am using Avast Internet Security 2013.

The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

Hardware Configuration in MAX when not logged in as Administrator

I am attempting to load a .cfg file for a VME device through the Hardware Configuration option on MAX. When you are not logged in as an administrator, the option is greyed out. I do not have the option of always running this as an administrator. However, I can set special permissions on certain folders or registry keys if necessary to allow non-administrators access to those locations in order to get the hardware configuration to work in MAX.
Does anybody know what special permissions would need to be set?

Hi Pual,
What operating system are you using? I’m not sure if there are additional specific files or registry keys, but could you give your use full control over the Measurement and Automation Explorer program? Let me know if you can test that out.
Matt
Applications Engineer
National Instruments

Brand new to Mac, does TM backup all users files, even when not logged on?

Hi Im brand new to Mac so please be gentle with me!!
Im about to use TM for backup, I have an account and have made one for my wife, as we both have an iPod and so Ive herd its easier to use 2 accounts.
She wont be logged on much, so if when Im logged on does TM backup the whole HDD, rather than just the user that is logged on?
if not how does it work to backup everything? do you have to keep logging on?
cheers

I have no idea what question the Apple person THOUGHT he was answering, but Time Machine backs up changes for everything in /Users (i.e., for all accounts) whether or not an account happens to be logged in at the moment. Just tested and confirmed.
THE TEST:
My Powerbook has an Admin account a Standard account and the Leopard Guest account.
I Restarted the machine, logged in as the Admin account, and turned off System Preferences / Time Machine. I then created a Text Edit file on the Desktop.
In Time Machine I verified that this file was visible in the current view of the Desktop but not in the immediately prior backup.
I then logged out of the Admin account and logged in as the Standard account.
I turned on System Preferences / Time Machine and did a Back Up Now. I then turned off System Preferences / Time Machine again to insure no further backups might happen.
Of course the Standard account can't see into the Time Machine backups of the folders from the Admin account, so I logged out of the Standard account and logged in again as Admin.
Looking in Time Machine, I now see the Text Edit file both in the current view of the Desktop and in the backup just completed by the Standard account.
I turned System Preferences / Time Machine back on, and deleted the test file. Looking again in Time Machine, the test file is no longer in the current view of the Desktop, it IS in the immediately preceding backup (the one that the Standard account initiated), and is not in the backup prior to that.
END OF TEST
This makes perfect sense since the file system event logs don't care whether a user is still logged in. Nor would a Deep Traversal backup care.
--Bob

How do you reset Admin password (when not logged in as Admin)??

Here's my predicament. I set up 3 accounts on our laptop - one for me and my wife (Standard accounts) and a House Account as the only Admin. Now, I don't remember the password for the House Account, which serves as the Admin.
I am trying to load new software, but it request administrative privileges. To make matters worse, when I try to install the MAC OSX startup disk (like the help manual says you should to reset the admin password), before my computer will restart the startup disk, it asks me for the Admin password. Because I am not logged in as the Admin, I can't even restart the computer when prompted by the startup and install the OS again.
Any suggestions or help with this issue?
Eric

Did you create an Open Firmware password as well? If not then just insert the OS X Installer Disc into the optical drive and restart the computer. After the chime press and hold down the 'C' key until the spinning gear appears below the dark gray Apple logo.

High CPU in 2960 when not logged

Hello,
I've noticed a strange behaviour in my 2960s regarded to CPU.
CPU level is very high, 70-75% when nobody is logged by vty or console, but it drops drastically to 40% when sombebody logs in. I've been able to discover that this is due to CPU interrupt level, as it shows the output of sh process cpu sort 5sec, just logged in.
RH0A01-SW1-10G#sh proces cpu sorted 5sec
CPU utilization for five seconds: 68%/37%; one minute: 67%; five minutes: 50%
...Some seconds after logged in...
RH0A01-SW1-10G#sh proces cpu sorted 5sec
CPU utilization for five seconds: 35%/11%; one minute: 52%; five minutes: 48%
Does anybody knows the reason for this?
Thanks!

There were critical HIGH CPU bugs with the 12.2(58)SE and SE1 as well as 15.0(1)SE and SE1. Cisco has managed to "fix" the issues with the respective SE2 releases BUT now you'll see the cosmetic bug after that. The cosmetic bug will show that you still have HIGH CPU but that's just it. It's cosmetic.
If you ain't running the IOS I've mentioned above, what is the complete IOS you are running?

Show message when not logged on

Similar Messages

Maybe you are looking for