Show tables with high I/O in database oracle 10g

I need to know which are the tables with high daily transactions
how to identify them?

I need to know which are the tables with high daily transactions
how to identify them?.
How* is anyone supposed to help when we don't know
a) Oracle version?
and
b) Operating System?
Take a look at DBA_TAB_MODIFCATIONS
and DBA_HIST_SEG_STAT (all of the DBA_HIST stuff if you have it).
Try and post more detail in future.
Paul...

Similar Messages

Select data from database tables with high performance

hi all,
how to select data from different database tables with high performance.
im using for all entries instead of inner joins, even though burden on data base tables is going very high ( 90 % in se30)
hw to increase the performance.
kindly, reply.
thnks

Also Check you are not using open sql much like distict order by group by , use abap techniques on internal table to acive the same.
also Dont use select endselect.
if possible use up to n rows claus....
taht will limit the data base hits.
also dont run select in siode any loops.
i guess these are some of the trics oyu can use to avoid frequent DATA BASE HITS AND ABVOID THE DATA BASE LAOD.

Join fact table with higher dimension level

how do i join fact tables with higher dimension levels with discoverer?
fact with detail at level C
measure X
dimension with
D->C->B->A
E->C
level
A B C
1------1------1
2------2------1
3------2------1
join between fact X and dimension level C
X=3*C because of sum(X) in discoverer and 3xC in dimension
is there a way to get correct values for X without creating a dimension like
D->C
E->

another way of asking this is whether you can create a summary table in Discoverer at a higher level than a dimension's fundamental grain. In other words - the summary examples in the documentation all describe leaving out one or more of your dimensions... they are either left in or completely taken out. But, some of the most effective summarization occurs when you summarize daily data to a monthly level. Assuming that I have a sales table (at a daily level, and a key value sales_date), and a table date_dim (primary key sales_date), I would like to create a summary sales_month_summary where the sales are grouped on month_year (which is a field in the sales_date table).
How is this done? I suspect that we can't use the date_dim table with the summary (due to the problems noted by the poster above). Do we have to create another table "month_dim"? Do we have to fold all of the desired date attributes (month, quarter, year) into the summary? Obviously we'd like to re-use all of the pertinent already existing date items (quarter, month, year, etc.), not recreate them over again, which would result in essentially two sets of items in the EUL. [One used for this month summary, and another used for the detail.]
I searched the forum - someone asked this same question back in 2000 - there was no answer provided.
The only other thought I have is to "snowflake" the date_dim into two tables and two folders, one at a date level, another at the month level. Then the detail tables can connect to date_dim (which is linked to month_dim), while the summary data can connect directly to month_dim.

Our Java application is built with java 1.4 version and oracle 10g

Our Java application is built with java 1.4 version and oracle 10g version database, is it possible to upgrade oracle database to 11g?

is it possible to upgrade
Yes. SE and the other editions have a migration/upgrade utility, not seeing any mention of that program in the XE license docs. To upgrade to 11gR2 from 10g, the 10g instance must be at patch 10.2.0.2 or higher.
So if you're a GUI dba, might be out of luck. But the the XE install has the catalog upgrade scripts that need to be run, there is a MOS note explaining the manual upgrade steps.
Or set up a brand new 11g database instance and datapump your user schema(s) from the 10g instance to the new 11g instance. The database doesn't care what java version you're using, it just does what its told with the data. DDL, DCL, DML ... its not much different. Quite a few new features in 11g.
But if you're after JVMs that piece is not supported with XE.

Migrate tables from Ms SQL Server 20005 to Oracle 10g

Hi all,
I am trying to migrate 10 table from Ms SQL Server 2005 to Oracle 10g. I started creating a SSIS package to transfer them but it always fail when it tries to create the tables.
Questions:
- Is there any other way to import Ms SQL Server 2005 tables to Oracle
- also I need to create a scirp that will update these tables periodically
any ideas?
Thanks

YingKuan is right. jsut to expound a little further. This will also allow you to have have scripts which you can run again and again or even schedule them regularly too.
B

Workflow status column in AllUserData Table with wrong coded in Content Database?

I would like to write a stored procedure to find out all workflow instances with errors, directly from content database.
I go to dbo.alllists to find out the workflow status column, and query AllUserData and find out not readable text
like:
쳀曩쌙䂻֞鼥
㖦巀䐝义颹暲ﻇൿ
ﱰ臨臸䋖ហ嬀ᨵ瘉
鄌幀鴏䔖튅㐻⩷揬
묨ή姖䩡ꊎ鉛۬浶
⟯봨飮䙕잳摕盜⣢
屑䳬鑥䶵岿珽磯Â
ꬁᆈ䀥䓝䶲紀篰䟫
蓏ꋦ䥌肃瘓⯈᭄
뵎㎙䈸䪿蔀ࢴ
෬꧋辂䘀馻ࡲ琓
ꞎ鵫䬺ࢬ䀒✫ꡱ
any ideas?

Hi,
Thanks to share your post.
For the issue, I think it may due to the wrong handling of the encoding type “UTF-8”, please refer to the followed article, they may give you a hand:
http://blogs.sun.com/shankar/entry/how_to_handle_utf_8.
http://devlog.info/2008/08/24/php-and-unicode-utf-8/.
Hope this could help you!
Leo

Table space not reduce after delete in oracle 10g

Hi..
Based on my system, i have found that my oracle table space did not reduce after the deletion query. Why ?.. Could somebody help me. As your info, I am using oracle 10g.
Thank you,
Baharin

After Delete the table space will not be set free. high water mark will not be reset. to regain the space you need to recognize the objects from which you deleted the data. This can be done in many ways.
1) Move the objects.
Alter table temp move --> optionally tablespace clause can be used. After this you need to rebuild table indexes.
2) With 10g table can be shrinked or reorganize to free the space.
alter table mytable enable row movement;
alter table mytable shrink space;
3) Export/Import
export the objects and drop and recreate with import.

Dynamic table owner in apex 3.0 and Oracle 10g

I have an application that requires bulk deletes for all rows in a particular department. The application edits incoming data and then moves final approved data to the 'production' db. End users modify their data via bulk load until they are happy with validity checks. At certain times of the year this could be as many as a million rows in a single table with referential integrity deletes in up to 5 additional tables. This generates unnecessary redo and archive logs so I thought we might just create separate schemas for each department (11) and do DROP/CREATE table instead.
The problem is that I see no way to dynamically change the table owner in ApEx. Is there any way to do this short of export/import to a 11 different parsing schemas?

...I thought we might just create separate
schemas for each department (11) and do DROP/CREATE
table instead.Instead of doing drop/create on your tables just do a truncate on the table.
>
The problem is that I see no way to dynamically
change the table owner in ApEx. Is there any way to
do this short of export/import to a 11 different
parsing schemas?You may try creating your tables as follows
CREATE TABLE dept1.table_a AS SELECT * FROM old_table WHERE dept=1;
CREATE TABLE dept2.table_a AS SELECT * FROM old_table WHERE dept=2;
Then investigate using UNION logic and possibly a flag to show/hide departments...
SELECT * FROM dept1.table_a WHERE dept=1 AND :P1_FLAG=???;
UNION
SELECT * FROM dept2.table_a WHERE dept=2 AND :P1_FLAG=???;
The above union logic may work for reporting needs but would likely not work for your maintenance pages where you need to insert/update/delete...
Message was edited by:
tfa

Returning 250 rows with 1000 Values in "IN" Clause Oracle 10g On IBM AIX !!

Hi,
Recently we have done the OS migration of Oracle 10g Server from Windows Server to IBM AIX. Everything is fine, But today we came across one crucial bug in the code, i.e In the Select Query, though we're expecting 1000 rows with 1000 values in "IN" Clause , It's returning Only 250 rows. Where as it's returning 1000 rows in Windows Environment with 1000 values in "IN" Clause. I have browsed throgh Google for the resolution but failed to get that.
This is something like,
In Oracle 10g On windows :-
select * from emp
where dept_id in (1,2,3,...................1000);
Assuming there are the dept_id values in Emp table from 1 ... 1000, It's returning 1000 rows.
In Oracle 10g On IBM AIX ,
select * from emp
where dept_id in (1,2,3,...................1000);
Assuming there are the dept_id values in Emp table from 1 ... 1000, It's returning 250 rows. Pls help me, what could be the reason for this. and what needs to be checked to fix this.
Pls suggest !!!
Raja

mmmh. Did you compared the select count(*) from your_table; in the two cases.
If the result is not good and nobody has deleted rows between migration and your test, you migration need to be replayed.
Which migration did you select, Transportable database or exp/imp...?
Edited by: Dba Z on 16 août 2009 08:56

Error on clone database, oracle 10g release 2 for windows server 2008

Hi,
OS: Windows Server 2008 X64
Oracle: oracle 10g release r2 for windows server 2008
An error occurred when creating a database, stop at last step, Screenshot:
[http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
the trace log content:
[main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
[main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
[main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
[main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
[main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
[main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
[main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
[main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
[main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
[main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
[main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
[main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
[main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
[main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
[main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
[main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
[main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
[main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
[main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
[main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
[main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
[main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
[main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
[main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
[main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
[main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
[main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
[main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
[main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
[Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
[Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
[Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
[Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
[Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
[Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
ORA-28547 : Connection to server failed, probable Net8 admin error
thanks
http://swervedba.wordpress.com/

What I can do with the free download version of Oracle 10g?

I'm new to Oracle. What can/can't do with the free download of Oracle 10g Release 2? What is the difference between Oracle 10g Release 2 and Express edition?

Express Edition has limits on the number of CPUs it'll utilize (it essentially forces itself to run single-threaded), amount of RAM it'll utilize and amount of data it will store. It is missing many of the higher level security and maintenance features you would find if you wanted to be highly available.
The downloadable version of Enterprise Edition is missing none of these, however the license states that you can only use the that version for development purposes.
I suspect you can also use the downloadable version to educate yourself on how the various features work, but it doesn't specifically say that in the license and I'm not a license expert.

Designer 6i / Database Oracle 10G / Metadata on Oracle 9. Is that possible?

Dear all,
Please give me a suggestion here! We have the Developer tools 6i and will want to bring a new Oracle 10G database into Designer 6i and the metadata to be stored in 9i database. Please let me know if this is possible or should we go for higher versions of Designer.
Cheers
Sarma.

Sarma,
I assume you want to install Des6i in a 9i database: that's possible.
Then you want to capture the database(definitions) from a 10g database into that Des6i version: also that's possible.
But I think it is not a supported combination...
HTH
Roel

Creating database oracle 10g express edition

1. can we create more than one database in oracle 10g express edition?
2. can we rename database name default "XE" in Oracle 10g express edition?

>
1. can we create more than one database in oracle 10g express edition?
>
No you cannot.
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
>
3.2 Oracle Database XE Installation and Execution Restrictions
<li>On a single computer, only one installation of the Oracle Database XE software can be performed.</li>
<li>In addition, users can run only one instance of the Oracle Database XE database on each individual computer.</li>
To run more than one Oracle Database server instance or install more than one copy of the database software, upgrade to Oracle Database 10g Standard Edition, Oracle Database 10g Standard Edition One, or Oracle Database 10g Enterprise Edition.
>
>
2. can we rename database name default "XE" in Oracle 10g express edition?
>
Yes you can. Please see the link below for details.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:963124000346653522
XE questions are best answered here {forum:id=251}
Regards,
Phiri

Physical Standby database Oracle 10g Standard Edition

Hello,
I open a new question about testing a standby database a because of this:
I realize that my standby database is 10g Standard and not Enterprise and not 11g.
Because for testing we plan to modify data on Standby, we are looking for some way to restore Standby to the point before testing.
So, I can't use Flashback Recovery Area for restoring my database to a certain point after testing.
In this scenario, the only way that I think is:
On Standby
- Shutdown database
- Copy by O/S all datafiles, temp files, control files and redo logs. That will be my backup before testing.
- Open database, test and modify data
- When test is finished, shutdown database
- Copy and replace by O/S all datafiles, temp files, control files and redo logs from backup place
- Open database as standby and apply all archived redo logs needed.
Would be it work without problem or should I copy other files?

user521219 wrote:
Hello,
I open a new question about testing a standby database a because of this:
I realize that my standby database is 10g Standard and not Enterprise and not 11g.
Because for testing we plan to modify data on Standby, we are looking for some way to restore Standby to the point before testing.
So, I can't use Flashback Recovery Area for restoring my database to a certain point after testing.
In this scenario, the only way that I think is:
On Standby
- Shutdown database
- Copy by O/S all datafiles, temp files, control files and redo logs. That will be my backup before testing.
- Open database, test and modify data
- When test is finished, shutdown database
- Copy and replace by O/S all datafiles, temp files, control files and redo logs from backup place
- Open database as standby and apply all archived redo logs needed.
Would be it work without problem or should I copy other files?yes, It will work.
it comes under Refresh of database, use --> cleanup --> restore.
If its enterprise edition , you can use procedure mentioned in this note How To Open Physical Standby For Read Write Testing and Flashback [ID 805438.1]
Edited by: CKPT on Jul 5, 2012 11:01 PM

Problem with do click on a field - Oracle 10g form - UNIX

Hello, friends.
I nedd a help. I have a problem with a Oracle 10g form when it was executed in UNIX environment.
The problem is that when I do click with the mouse in a different field, doesn't lead me to the other field. That is, don't let me to do click on a different field than the initial field of the form. Just work with TAB or ENTER.
Would you tell me what I can check?
Thanks.
Kisses.
Annie

Hello
Another question about the problem that I posted yesterday:
Why the system.cursor_item isn't change when I do click in other field? Just the system.mouse_item changes. This problem occurss in Oracle 10g at UNIX environment (don't occurss in Windows environment).
Thanks.
Kisses.
Annie

Show tables with high I/O in database oracle 10g

Similar Messages

Maybe you are looking for