Showing Not Updated when reinstall the Same versio...

Hi,
After reinstall the Same version of N96's firmware using Nokia Software Updater, press *#0000#, and then Device Manager is opened, but I found the Latest Update in Device Manager shows Not Updated.
Is this normal? whether the NSU updating normal or not?
Thanks.
============
RM-247 12.043
Nokia N96
Main in Thinland

Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router.  Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address.  To correct this you can reboot your router by unplugging it from power for about 30 seconds.
It wouldn't hurt to also reset your iPod.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting assistance.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Similar Messages

  • Text not updated when changing the ResourceBundle

    this is an abstraction of what i have on my code:
    controller
    public class controller extends VBox{
         @FXML protected Label ex2;
         public CtrlMainMenu() throws Exception{
              FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("/view/View.fxml"));
              fxmlLoader.setController(this);
              fxmlLoader.setRoot(this);
              fxmlLoader.setResources(CtrlLanguage.resource);
              fxmlLoader.load();
         @Override public void initialize(URL arg0, ResourceBundle arg1) {
              ex2.setText(arg1.getString("ex2"));
    }View
    <fx:root type="VBox" xmlns:fx="http://javafx.com/fxml">
         <children>
              <Label text="%ex1"/>
              <Label fx:id="ex2"/>
         <children>
    </fx:root>Language controller
    public class CtrlLanguage{
         private static String PATH =
              new File(
                   CtrlImageLoader.class.getProtectionDomain().getCodeSource().getLocation().getPath()
              ).getParentFile().getPath() + "/language/";
         public static ResourceBundle resource;
         public static void setLanguage(String file) throws Exception{
              try {
                   if(new File(PATH + file).exists())
                        resource = new PropertyResourceBundle(new FileInputStream(PATH + file));
                   else
                        resource = new PropertyResourceBundle(CtrlLanguage.class.getResourceAsStream("/language/"+file));
              } catch (Exception e) {
                   resource = new PropertyResourceBundle(CtrlLanguage.class.getResourceAsStream("/language/EN"));
         public static String get(String key){
              try {
                   return resource.getString(key);
              } catch (Exception e) {
                   return key;
    }problem comes when I try to change the language without changing the current root
    the elements of the view are not updated when the bundle is changed (CtrlLanguage.setLanguage("file");) until the root is changed/loaded again
    is there any way so i can make the content change without having to reload again the root?

    A method which returns an instance of the following class:
    * A localizable read only property for internationalization of string properties.
    * @author Christian Schudt
    public final class LocalizableStringProperty extends ReadOnlyStringProperty {
        private String resourceKey;
        private StringProperty text;
        private String baseName;
        private ClassLoader classLoader;
        // Keep the listener as hard reference in the class, so that it won't get GCed, until this class has no references any more.
        private ChangeListener<Locale> changeListener;
        public LocalizableStringProperty(LocaleManager localeManager, String baseName, String resourceKey) {
            this(localeManager, baseName, resourceKey, null);
        public LocalizableStringProperty(LocaleManager localeManager, String baseName, String resourceKey, ClassLoader classLoader) {
            changeListener = new ChangeListener<Locale>() {
                @Override
                public void changed(ObservableValue<? extends Locale> observableValue, Locale locale, Locale locale1) {
                    localeChanged(locale1);
            localeManager.localeProperty().addListener(new WeakChangeListener<Locale>(changeListener));
            this.baseName = baseName;
            this.classLoader = classLoader;
            this.resourceKey = resourceKey;
            text = new SimpleStringProperty();
            localeChanged(localeManager.getLocale());
        private void localeChanged(Locale locale) {
            ResourceBundle resourceBundle;
            Locale.setDefault(locale);
            if (classLoader == null) {
                resourceBundle = ResourceBundle.getBundle(baseName, locale);
            } else {
                resourceBundle = ResourceBundle.getBundle(baseName, locale, classLoader);
            text.set(resourceBundle.getString(resourceKey));
        @Override
        public String get() {
            return text.get();
        @Override
        public Object getBean() {
            return text.getBean();
        @Override
        public String getName() {
            return text.getName();
        @Override
        public void addListener(ChangeListener<? super String> changeListener) {
            text.addListener(changeListener);
        @Override
        public void removeListener(ChangeListener<? super String> changeListener) {
            text.removeListener(changeListener);
        @Override
        public void addListener(InvalidationListener invalidationListener) {
            text.addListener(invalidationListener);
        @Override
        public void removeListener(InvalidationListener invalidationListener) {
            text.removeListener(invalidationListener);
    }

  • Materialo slip no not updating when creating the transfer posting(MB1B 313)

    Hi all
    I have a problem in  updating material slip no when creating the transfer posting(MB1B 313).
    when creating the MB1B if i put the mat slip no manually then system updating in the material doc.
    But when system creating the transfer posting(through auto Jobs) the material slip no not updating in the material doc.
    this is started to happen only after i deleted the condition records(ZDRL) for printing the doc for a relavent storage location.Kidly let me know is there any relation between ZDRL and the material slip updating.
    Thanks
    Manju

    hi krishan,
    Pl ensure that there is any release strategy, or in the transfer posting enter the plant and m.type also storage location in the application tool bar click with reference to PO, and enter the po number and try to proceed. it will work.
    Regards,
    nagarajan

  • Why the PO action history is not updating when i perform the vacation rules

    Hi,
    Can any one explain why the action history is not updating when performed the vacation rules using the below example
    Example: A >B>C>D are in the approval hierarchy here I have defined the vacation rules by login to the user C here I selected the item type as “All” and delegated to D.
    Now the buyer “A” has sent the document for approval. The user “B” can successfully reserve funds and approved the document. Now the document is automatically delegated to D. Here D can open the document from open notifications and approved the document. Now when I checked the Action history here I cannot find the performed name D who has actually approved the document.
    Note:we are using the 11.5.10.2 version.
    The Action History in the following manner
    Seq Action Performed By
    ================================
    4 Approve C
    3 Forward B
    2 Reserved B
    1 Forward A
    0 Submit A
    From the above action history why the user D name is not showing. Can any one let me know ASAP?
    Regards,
    Keivn.
    Edited by: user10960960 on May 5, 2009 3:36 AM

    When you set up the vacation rule, if you simply delegate the ownership to D, then C retains the ownership and the approval occurs with C's limits. And hence D is treated as the approver.
    If you transfer the ownership, then C is out of the picture. The notification goes to D and when he/she approves, D's limits kick in and he will be seen as approver.
    Hope this helps,
    Sandeep Gandhi

  • TS1398 I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

    I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I deleted all Apps on iPad as they were associated with an out of date Apple ID and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.

    I deleted all Apps on iPad as they were associated with an out of date Apple ID (which I have forgotten the password) and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.

    Why don't you explain what happens when you try to delete these two apps that are showing that they need updates. You can only delete them if they are actually installEd on the iPad. Are they on the device?

  • Airplay not showing up ISO7, Apple TV update but still no Airplay showing up? Anyone having the same problem?

    Airplay not showing up, all are on the same wifi. Can anyone help?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    http://support.apple.com/kb/ht5209
    http://support.apple.com/kb/ht4437
    http://support.apple.com/kb/TS4215
     Cheers, Tom

  • My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    Must be serious because you have stated the problem 4 times now.
    Here are a number of things that you can try and maybe one of them will help.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
    And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

  • Problem: ipod server could not be contacted, i went to control panel, lan settings, ck'd auto detect and went back to i-tune to update and got the same error message, any help is appreciated

    Error message: Ipod software update server could not be contacted. I went to control panel, lan settings, clk'd auto detect settings and ok. When i went back to i tunes and clk's update, i got the same error. Any help is appreciated.
    Rand221

    See the previous posts on the right side of this page under the heading "More Like This" that have you same error message.

  • When i put a cd into my itunes library sometimes it does not get stored under the same cover. sometimes stored under 3 or 4 different icons. what can i do to prevent this. how do i get all the songs back under the same kicon in one place? help would be a

    sometimes when i put a new cd into my itunes libray all the songs do not end up under the same icon. sometimes it will go into the library under 3 or 4 different icons (album artwork) and sometimes if there are for example 12 songs on the cd each song goes under a separate icon.this seams to happen more frequently with cd's that have different artists on one disc and not just one artist performing all the songs.
    is there anyway to prevent this from happening?
    is there a way to go into my library and get them put back under one icon as it should have been? i have tried drag and drop and it will not work.
    thanks to anyone that can offer some help

    The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
    It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
    tt2
    Message was edited by: turingtest2

  • I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.

    I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.

    You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
    The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
    Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

  • How to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    how to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
    At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card.

  • I have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

    i have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

    System Preferences > Network > Ethernet? If that shows "not connected" that is all your Mac knows. As far as it is concerned there is no cable connected to the port on your Mac, or the other end of the cable is either disconnected or connected to something that is broken.
    Try another cable. If the cable is broken you will also get that status message. If you have exhausted all of these possibilities, the only remaining cause is an inoperative port on your Mac.

  • Has anyone else had trouble with apps not updating when you update through the app store?

    I'm having trouble with GSN Games app not updating, even though the app store says that it's the most updated version.  Has anyone else experienced this?  My mother's app updated just fine with all the new features and games within the app, but mine didn't update the same.  We both have ipad2 running on ios 7.0.06.  I can't figure this out.  New games were added to the app that I'd like to play, but can't because of this.
    Any suggestions before I contact the app developer?
    Thanks so much for you help.

    I frequently get my connection is to slow for play.
    Tap Settings / General / Reset / Reset Network Settings.
    Restart your iPhone.
    Try again.

  • I want to do banners ,how can we do  when click the same button (next button)  it must show differen

    i want to do banners ,how can we do  when click the same button (next button)  it must show different images . cam any one help

    Check out my blog with samples on Edgehero.
    http://www.edgehero.com/articles/interactivity

Maybe you are looking for