Showing only Approved Metapedia Terms

This question is two fold:
1) Is there a way to only show approved metapedia terms?
2) How have others managed their metapedia terms in a "multi-tier" environment (dev / qa / prod)? Do you promote your terms / changes through different environments or do you manage your terms in one environment?  What is SAPs suggested best practice here?
I'm trying to achieve the scenario where metapedia users only see approved terms. Right now we are controlling this through drafting the terms in one environment and then exporting / importing them into another environment as approved.
Thanks!!
Tom

This can be achieved by setting up appropriate user permissions. Note that for Metapedia there are predefined user groups - Metapedia User, Metapedia Author, Metapedia Approver and Metapedia Administrator.
Among these groups Metapedia Users can only view approved terms. Metapedia Author, Approvers participate in the process of creating the draft definition, refining it and approving it. Once the term is approved, it is visible to Metapedia Users. Also if for some reason author starts revising an approved term - the changes made by the authors are not visible to Metapedia User until the revised term definition is approved.
Given this context, you should be able to manage all Metapedia activities in the same environment. You do not need to have separate Dev and Prod environment for Metapedia scenarios.

Similar Messages

  • How to show only Indexes in Search Scope

    Hi All,
    Is it possbile to allow users to choose only Indexed in search scope.
    I tried editing the Search Options set, there i found that I can enable and disable search scope, but whn search scope is enabled both the Indexes and folders are visible.
    I want to show only Indexes to the user. How can I hide the folder options alone in the search scope?
    Thanks and Regards
    George

    Instead of using the Search Options set in the KM Search iView, use the Search Component Set.
    Create your own Search Component Set by going to <b>System Administration > System Configuration > Knowledge management > Content Management > User Interface > Search > Search Components</b>
    While creating the Search Component Set, Specify <b>Component for Search Options</b> as <u>search_input_indexes</u>.
    This should help you.
    Or you could do the following.
    In the Search Options set, Do the following.
    1) Uncheck <b>Enable Search Scope Selection</b>.
    2) Provide the various index names in <b>Search Index IDs (csv)</b>
    The above option would by default search the selected indexes for the search term and would not provide the user with the functionality of searching in folders.
    Pradeep.

  • Approval of Terms & Conditions

    Terms and Conditions are often integral processes in forms submissions.  Does FormsCentral have an elegant way of acheiving this in a way that meets strict legal standards.  I can think of a few different ways of achieving this result, but would rather not have to recreate the wheel if someone else has acheived the same result.... especially when the terms and conditions are very lengthy.  Can someone suggest a best practice for having a user approve multiple terms and conditions as part of a forms submission?

    Have you considered using the "text box" to spell out your terms, in conjunction with a [Do you agree to this Specific Term?" check "yes" or "no"] ??  Terms can be located and read by user with clicking on the "question mark" symbol to show the "text box"
    There is also the function of the "Skip Logic" which may be useful in conjunction with "Insert Page Break". Perhaps you could devote an entire page to the Terms & Conditions at Font size 9 or 10. (still readable and not too small)

  • Approval Tempate Terms Query Problem

    I have a query that i've included in the Approval Tempate - Terms Tab, that checks to see if any order lines after discount price is less than a Item UDF minimum price for the item. It is as follows:
    SELECT DISTINCT 'True'
    FROM  [dbo].[ORDR] T0 (nolock)
    INNER  JOIN [dbo].[RDR1] T1 (nolock) ON  T1.[DocEntry] = T0.[DocEntry]  
    inner  join [dbo].[OITM] T3 (nolock) on T3.ItemCode = t1.itemCode
    where T0.[DocNum] = $[ORDR.DocNum]
    and T1.INMPrice <= T3.U_LBSiMinPrice
    My problem is that the Approval is not kicking off no matter the outcome of the query. Meaning if the price is < the minimum price or > the minimum price, the approval pop-up window does not appear.

    Hi Scott,
    B1 does not support approval queries on document lines. you can query only document header.
    you can either try to workaround it with all sorts of aggregate UDFs in the header, or alternatively take a look at:
    [http://www.beonesolutions.com/ip/Solutions/ap.html|http://www.beonesolutions.com/ip/Solutions/ap.html]
    all details, including the ability to query all document tables, are in:
    [http://www.beonesolutions.com/files/Approval_Pro_Brochure.pdf|http://www.beonesolutions.com/files/Approval_Pro_Brochure.pdf]
    Gilan

  • Tax amount is not showing at approval in me28

    Dear all,
    I m creating a purchase order of 10000 value and assigning a tax of 10% so value become 11000 thousand
    But at the time of approval in me28 it's showing only 10000,
    I want 11000 thousand at approval.
    Plz help me.

    Hi Kakani,
    as per your tax procedure, the tax amount is going to separate G/L accounts through account keys,
    but for release procedure we maintain the net value as a charecterstic,
    if you want to get the 11000 amount,
    yo u can change the tax procedure
    regards
    lakshmi chenna kesava reddy

  • When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event.  Now it shows only one photo at a time.  How do I get it back? Can you help?

    When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event.  Now it shows only one photo at a time.  How do I get it back? Can you help?

    On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
    Regards
    TD

  • Possible to Have ToC Default to Show Only Top Level (collapse sublevels)?

    Howdy!
    I'll bet I'm not the only one wishing for this.  Let's say you're using Captivate 4's Table of Contents feature with a longish movie of Cp slides, which is chunked into bite-size sections content-wise.  In the ToC, though, you can't mimic that same organization scheme; at least, the learner would first need to collapse all the ToC folders you've created so they see only the top-level listing.
    This can be a critical issue:  keeping the at-first-glance list in the ToC brief enough to be inviting to learners, yet allowing learners to drive which details are currently visible.
    A movie's topical hierarchy could be along these lines, for example ...
    Section 1 - National Brands
    What are National Brands?
    Why Are They Important to Our Business?
    Working with Nat. Brands
    Practice Your Knowledge
    Section 2 - International Brands
    What are International Brands?
    Why Are They Important to Our Business?
    Working with Intl. Brands
    Practice Your Knowledge
    You'd like to organize the ToC to show only the section titles (1st level) and to suppress the 2nd-level detail (slide titles) until the learner chooses to expand the folder to see those details.
    I've tried things like grouping the slides into sections in the Storyboard view and organizing the slides into sections strictly within the ToC -- both to no avail.
    Has anyone solved for this need yet?
    I'm all ears, and you'd be doing learners of the world a huge favor.
    Thanks!

    Hi, Jim.
    Thanks for being 'on the case' and looking into this so quickly.  Your
    findings are encouraging, although my user base is generally working with
    IE 6 and FP8 or 9.
    Since the only thing I may influence is getting  IT to help push out FP10,
    I'm hoping it's more of a player- than a browser-version issue.
    I'll test things out by Monday and let you know the results.  Wish me luck!
    Dave
                                                                                    From:       Jim Leichliter <[email protected]>                                                                               
    To:         Dave Tressler <[email protected]>                                                                               
    Date:       03/26/2010 06:02 PM                                                                               
    Subject:    Possible to Have ToC Default to Show Only Top Level (collapse
                  sublevels)?                                                                                
    Dave,
    I just tested this on my local web server and it worked fine.  I created a
    blank project with 8 slides.  Created my TOC with grouping... 2 slides in
    each group.  I turned on self paced learning.  I tried with and without the
    widget and it picked up where I left off in either case.  See
    https://docs.google.com/leaf?id=0B86WuEq6SVwRNWIwMjhjODctMjE2Yy00MWE2LWI5YzEtMGQxYzNjOWQ0Z mI2&hl=en. 
    I published using FP10 and IE8 to view.  Notice any difference between
    your project and this one?
    Thanks,
    Jim Leichliter

  • Preview shows only one page of article

    I have a 23-page portrait-only article for which I can preview only one page.  Normally it is the first page, but if I click on any other page, the preview shows that page -- but the slider on the bottom of Content Viewer shows only the first page regardless of what page is in the preview window.  I'm a newbie at this, and this is my second article; the first one worked just fine.  Put them together in a folio, in either order, and the "normal" one shows all pages, and the other shows only page 1.  Any thoughts?
    Jose

    Silly newbies... I read some of the layout options in Plain English.  Apparently, if the article isn't set to "horizontal swipe only" it's on vertical swipe only, not "optional."  The Aha! moment came from accidentally brushing the mouse so that the preview scrolled upward, revealing the pages hidden below.  Now I get it.

  • How to build a report in Oracle CRM On Demand using the Shared Activities subject area to show only 5 recent activities?

    I’m trying to use the Rank function in a report and I’m having issues getting it to work.  I’m using the Shared Activities subject area and would like to rank activities by Contact. Since there are multiple activity association to the users (attendees), I’m not getting the correct ranking order.  Here is what I tried so far…
    RANK(Activity."Task Due Date" By Contact."Contact ID")
    RANK(Activity."Task Due Date" By Contact."Contact ID", Activity."Activity ID")
    RANK(Activity."Task Due Date" By Contact."Contact ID", Employee."Employee ID")
    I don’t mind getting the same values for the same dates but the increment should be in sequence.  What I’m getting is 1,1,3,3,5,6,6…  I want to show only 5 recent activities and so need the sequence of 1,1,2,2,3,3,4,4… If not date, what else is there to make it unique?  I tried to rank it by Contact Id, Activity Id, Emp Id, etc.  Nothing works!
    I have tried other functions like RCOUNT, TopN, BottomN, ect. with no luck.

    Hi Max
    Our requirement is to see all the activities for a server in a month ONLY IF there are activities on DIFFERENT dates. So using my example, server2 has activties on 7/1 and 7/14. Then we want to see all the activities for server2 in that month. Server3 has two activities but both activities are on the same date. So we don't want to see server3.
    Counting by server will not work because that will include server3 in my example.
    What I really want is to be able to count unique occurrences of dates per server in a month. And if this count is > 1, then this server will be in the report.
    I used a pivot table to count the unique occurrences of dates by server by month. So using my example, I have this result:
    Server1-July: 1
    Server2-July: 2
    Server3-July 1
    What I really want (conceptually) is to be able to filter this pivot table by the matrix column which is the count. I just couldn't figure out how to do that :). Then I thought I could use this report (with pivot table result) as a filter into another report.
    Hope you have some idea....:)
    Thanks

  • How can I get Expose to show only and all active windows, regardless of app

    Sometimes I have two applications running with several finder windows hidden on the dock. I'd like to know how I can (or if I can) get Expose to show only the Active windows - not the ones on the dock. With this new upgrade, it seems that all open windows that are on the dock appear in a row at the bottom of the screen, which takes up real estate - can I turn that function off so just the open, undocked windows of all apps show?

    Sounds like you opened a message in a new window. Have you tried closing that window and see what happens?
    If that is not it maybe you can post a screen shot of what you are seeing.

  • How do I show only ONE iCal calendar at a time?

    I'm using iCal to manage several different calendars on different websites and also have different calendars of my own. Currently they all show in iCal and this is getting very difficult to manage. How do I adjust iCal to show only the events associated with one calendar, e.g. the calendar I have clicked on, rather than all of them? Do they all have to show?

    Thanks - that's better than nothing, but switching them off/ on is still a bit fiddly as I will want to update different calendars frequently.
    I was hoping that it would be possible to set it up to simply show the calendar you had clicked on on at the moment, and also to set a default set of calendars to be on as a group (i.e. those I use to organise my own time).
    With one click I could then go from my personal calendars to one used for an external website and back again.

  • Is there a way to show only flagged email on iOS Mail?

    I use Exchange 2007 at work with Outlook 2010.  I also use my iPad to connect to my company Outlook Web Access.  On the iPad I am able to mark a message as flagged.  I use the flag on a message to indicate that there's some action that I need to take on the email.  After I skim my inbox and flag all the emails with actionable items in them I go to my smart folder in Outlook which shows only my flagged messages so I can focus on those with actionable items.  I noticed on IOS Mail there does not seem to be such smart folders and there seems to be no way to view only messages which are flagged.
    Can someone please explain how to do this on the iPad.  It is very important to me.  In fact, it's so important, that I would switch to Windows Phone platform just to have this one feature.
    Thanks!

    I too would love to filter my inbox down to just flagged emails - I'm on iPad 3 with latest iOS, though it seems latest OS is not the problem, but rather a simple oversight in usability, and more important productivity.
    On the note of productivity, why does it take SO MANY clicks to flag an email on iPad mail? Have to hit Edit > mark the email > Mark > Flag. I count three superfluous taps there. There should be a swipe action on the left (much like the swipe and Delete on the right hand side of the email heading) for flagging. And a simple little flag symbol at the top to hit when I want to see only flagged mails. Productivity should be the name of the game.
    I also realise that venting in this forum probably isn't the best place for it...

  • How to show only one element in drop list(common VO)

    Hi All,
    I'm using 11g adf jdev.
    I have a common view object VO. In this VO one attribute is dropdown list , which i commonly used in some jsf pages .
    Now in one particular jsf page i want show only one element in the dropdown list .
    how can i handle with out distrib'g the common VO.
    THANKS IN ADVANCE

    BTW, why you want to display only one item in the list.
    If you are sure that the list will be having only one item, why don't you have it as inputText/outputText
    How do you filter out the item to be displayed in the list? If that filtering is done on listdatasource bound to the list, the list will automatically show only one item(i.e, the filtered item)
    HTH
    Sireesha

  • How to show only date in BO webi 3.1 text box

    how to show only date in BO webi 3.1 text box for e.g:-
    01/01/2005  (no time only date)

    hi,
    just check by which format your date is coming
    just create a one variable and check =UserResponse("Transaction Date From (mm/dd/yy)")
    if your output is in format of("mm/dd/yyyy hh:mm:ss a")
    then some format we have to write in todate syntax
    then your final formula for date would be
    =FormatDate(ToDate(UserResponse("Transaction Date From (mm/dd/yy)");"mm/dd/yyyy hh:mm:ss A");"dd/mm/yyyy")

  • I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name.  How can I restore the names to my recent calls list?

    Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.

Maybe you are looking for