Showing Zero values in OLAP Pivot Table for Excel 2007

Hello,
I needed a help to a problem. Is it possible to show the values with No sales in an Olap Pivot Table ??
I have a sales Cube, and brwsing it via excel i wanted to filter on a Product Category and see how many products in this category had made no Sales. By default the Pivot table doesn't shows the empty values, so if i check the Showm empty rows option for
Pivot Tables, i see the whole of the products populated with and without sales, and i can't filter further. Is there a way i can only get those which have no sales.
Vinish Viswanathan

Happy Holidays,
I can slice on product categories in Excel 2013 with these settings for the Pivot Table:
Activate "Show items with no data for rows and columns"
Apply a value filter that says that the measure should filter on values = 0
Have the product natural hierarchy on rows with levels product category->subcategory->product.
Expand the levels below product category
Use the product category attribute and not the hierarchy as the filter.
I do not have Excel 2007 installed anymore.
HTH
Thomas Ivarsson

Similar Messages

  • Limit SC showing Zero value in report SC per cost centre in SRM portal

    Hi SRM Gurus,
    On executing SC per cost centre report avaialble in SRM 5.0 Portal I am getting value of limit SC as zero. while in all other follow on documents i.e. PO and Invoice its displaying the value.
    Is it due to the fact the for Limit Items we don't have any GR/confirmation i.e zero quantity? and the value column field has Sigma symbol on it. so maybe it is multiplying quantity with the value here?
    Is this SAP SRM standard for limit items to show zero value in this report ?
    Please let me know. Thanks for the help.
    Regards,
    Varun Dhawan.

    SRM experts please help in this regard. Any insights on LIMIT Shopping carts??

  • Withholding tax showing zero value in vendor line item display report

    Hello Friends,
    I have facing one strange issue in withholding tax, when im executing report of vendor line item display(fbl1n tcode) the column for withholding tax is showing zero value for some documents even though the tax is been deducted which is clearly visible in f-02 entry.
    Kindly help me on this!
    Regards,
    Sunny

    Hi,
    1.Please check the WHT config has been done properly.
    2.Check the vendor master and varify tax fields are filled up.
    Regards

  • Excise invoice showing zero values

    Hi all,
              In stock transfer from plant to depots, i have created excise invoice with reference to proforma invoice, but the excise values are not reflecting in excise invoice, i mean to say BED,ECESS ,SCESS are showing zero values....
    regards,
    ram

    Hi lakshmipathi,
                             Its really gud to c u,
                       i have checked the settings as u said,all are perfect,
              onemore thing i wud like to inform u that while creating a sale from plant to customer, excise invoice is coming perfectly with reference to commercial invoice,
               while in stock transfer with reference to proforma excise invoice is not picking values.
    regards,
    ram

  • Can we create a pivot table of Excel in a JSP page using POI

    Hello,
    I want to know whether we can create a pivot table of excel sheet in a jsp page using POI package from apache.
    thank you.

    Hi Alex,
    Many thanks for replying.
    I followed the link, but unable to get correct output.. I have shared the template earlier. I can share the template once again.
    It would be grateful if you give me share the working template with table of content.

  • How to make a Crystal Report look similar to a pivot table in excel?

    Hello,
    I was wondering if there was a way to create a pivot table to look similar to a pivot table in excel? I have a client name field that I would like to be expandable(similar to pivot table) to show notes about that client.
    Any help would be greatly appreciated, Thanks!!!

    There really isn't a god way to do this in CR. The problem is that CR doesn't offer any kind grid object other than the cross tab object. You can try playing around with the cross tab and read the online help files on it but I don't think you'll get it to do what you want.
    HTH,
    Jason

  • Does anyone know how to hide the export option for excel 2007

    Does anyone know how to hide the export option for excel 2007?
    We are having an issue with negative numbers downloading as text field in excel 2007, works fine in excel 2003.
    We are on version 11.1.1.7.0 of OBIEE.
    Thanks for any response.

    Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

  • Error running XL Reporter: 'a required COM add-in program..' for Excel 2007

    I have 2 users running Excel 2007 that can't run XL reporter.  They get the message 'a required COM add-in program for XL Reporter has not been loaded'.  I have instructions for Excel 2003, but not for 2007.  Does anyone know how to resolve this for Excel 2007?

    Gordon,
    I have instructions to get the IXXLReporter.dll file in the installation area, but 2007 has completely different layout. I can't find where to go???  Can you please give me the procedure?
    Edited by: Pat Frohlich on Apr 1, 2009 10:12 AM

  • Which TDM Addin for Excel 2007?

    I downloaded what I think is the latest TDM add-in for excel 2007.  When I go to open my file a message comes up saying that my file has more than 65000 rows.  I know the limitation is not in excel 2007.  Will the add-in only load 65000 rows of data? 

    Frank,
    So the installation of the addin went smoothly?  You did not have to add it in manually like in this KB?
    http://zone.ni.com/devzone/cda/tut/p/id/5885
    You may want to check the specs on the trial version of excel 2007 that you have.  Did you get this from the web?  I don't know if Microsoft would do this, but sometimes the trial software won't have all of the features of the full version.  I just installed the addin on my machine with full version of excel 2007 and was able to open a TDM file with a million random numbers stored in it. 
    A good way to test this would be to just create a spreadsheet file with 100,000 numbers in it, then try to open that in excel just to see if it throws the same error.  That would eliminate the possibility of the addin being to blame.  If the file opens without error, then you may want to check that the addin was installed correctly by referencing the KB linked above.
    Have a great day.
    Brian Coalson
    Software Engineer
    National Instruments

  • Invoice show zero value for service po

    Hi all,
    I have a service po with item catoegory B and account assignment K but when i do MIRO it does not shows the value of po simply says qty zero and value zero
    any suggestion
    Thanks

    Hi,
    In your PO have flagged service based IV in invoice item details. Please post the service entry sheet in ML81N accept and saved the entry sheet.
    Then, system will automatically post the goods receipt posting for the service entry sheet.
    Pleas echeck it PO -History before posting the invoice,
    Now post the invoice then system allow to simulate the invoice for the service PO.
    With Kind Regards,
    Thiru

  • KKAO is showing ZERO value for all orders

    Hello All Experts,
    I am running a WIP report for Production Order via KKAO. I am getting "ZERO" values for all the orders available in system. All my orders are "Release (REL) and in "Partial Delivered (PDLV) status still I am getting ZERO values.
    Please find below screen shot for reference :
    Can experts guide on this why I am getting ZERO values here ? Guidance will be very helpful.
    Thank you.
    Regards,
    Sharu.

    Hello Rajnessh Sir,
    Please find below screen shot :
    OKG9 -
    OKG3 -
    I am really not sure what to check here, I am new to WIP area. Experts please guide. Is above said settings correct ?
    Regards,
    Sharu.

  • How do i show zero values in a SVG chart ?

    Hello All,
    APEX version 2.0
    I am sure there is an easy way, but could not find it in this forum.
    I basically have three series in a SVG line Chart
    I want to show a value or zero value on a month where no data is returned.
    SELECT NULL LINK,
    TO_CHAR (DATE_CLOSED, 'MON-YY') label,
    COUNT(PRIORITY_OPTION) Value
    from "TW_OPERATIONS_VIC"."TW_WSF_MAIN"
    WHERE DATE_CLOSED IS NOT NULL AND PRIORITY_OPTION = 'Low'
    GROUP BY TO_CHAR (DATE_CLOSED, 'MM-YY'),TO_CHAR (DATE_CLOSED, 'MON-YY')
    The tables consists of the following
    ID-------------Priority-----Closed_Date
    Rec 1--------Low----------01/07/07
    Rec 2--------Low----------01/08/07
    Rec 3--------Medium----01/07/07
    Rec 4--------Medium----01/08/07
    Rec 5--------High---------01/09/07
    Rec 6--------Medium----01/09/07
    I want to show a line graph with three series
    Months shown will be July, Aug & Sep
    Values in Jul & Aug for High should show 0
    Value in Sep for Low should show 0
    Unfortunately the graph tend to show only the months relating to the first series
    ie if Medium is the first series then Jul , Aug & Sep is shown with data from the other series not shown in the correct columns.
    Hope I explained properly
    Frank

    Hello Denes,
    Thankyou for replying to my question.
    I went to your impressive website and viewed your examples.
    They deffinetly appear to suit my needs, but alas my SQL skills are not at a level where I can easily convert your example to my needs.
    I have tried to convert the example, but as yet I am not getting the correct data results.
    thankyou again
    frank

  • Resetting calculated values  in Answers pivot tables

    We have a a pivot table whereby we summarize by zones. Our calculation is derived using running aggregates.
    E.g
    Zone name | Value 1 | Value 2 | Calc Value
    Zone A X y x/y
    Zone B A B A/B
    However we are unable to reset the value of our running aggregate when our zone changes. Hence for Zone B in the example we are getting a value = (X+A)/(Y+B) when we want A/B.
    We are calculating our values at previous 7 day intervals so hence these have to be calculated at run time
    We are in 10.1.3.4
    All help would be appreciated.
    Thanks

    Hi,
    you can with this syntax inside the column Calc Value of a table view:
    RSUM(Value 1/Value 2 by Zone name)
    Hope it helps.
    Regards,
    Gianluca

  • Missing "Select Multiple Items" in Report Filter for Pivot Table in Excel Services

    I have a Pivot Table with a Report Filter in Excel 2013.
    When I click the Report Filter in Excel , I get the check-box option to "Select Multiple Items".
    But , when the same Report.xls is published to SharePoint 2013 Excel Services,
    the check-box-option is missing ! and the default is "Multi-select", and there is no way to disable or toggle Multi-select
    is there any fix ?
    thanks

    Thank you Naveen, I have already read this , and checked ,
    But, it does not fix my issue :(
    All my desktops are set at 100%.
    All my List Items show as Check-boxes, ok.
    The problem is: that check-box option "Select Multiple Items" , just above the OK button, is missing when I run the report in Excel Services.
    So I have no way to toggle Select Single Items only.
    But when I Open this same report in Excel, everything works well.
    Is there any Fix for Excel Service /Sharepoint 2013.
    Paul

  • Query output in APD shows zero values

    Hi ,
    I am using query output in APD . The query has got some calculated key figures for which the output result of the query in APD shows zero .Is there any way to resolve this  .
    regards,

    Hi,
    You need to store the source key figure value in a separate variable lets say v1 then **** the new variable v1 value to circular right, then remove the gaps, and then again shift V1 right by deleting trailing spaces and then finally copy the value in V1 to source or target key figure.
    Hope this helps.
    - Kiran

Maybe you are looking for