Shuttle Exress Topics & Help

Hi all,
I'd like to open up a Contour Shuttle Express thread. The last known one is archived.
I recently purchased one new. Loaded the software from an update online and I can't seem to get it to work. Logic Pro 8.
My first and formost request is how do I get the jog wheel and the FF REW to work?
Thanks.
-scan

D1 is a BIOS Boot Block Initialization checkpoints and is defined as such:
Quote
Early super I/O initialization is done including RTC and keyboard controller. Serial port is enabled at this point if needed for debugging. NMI is disabled. Perform keyboard controller BAT test. Save power-on CPUID value in scratch CMOS. Go to flat mode with 4GB limit and GA20 enabled.
This happens before the actual memory initialization or video card initialization. For now we can conclude, that those are not the problem. As it looks, the issue is processor or chipset related.
- Did you properly connect the +12V CPU power connector to the mainboard (4/8 pin)?
- Did you unplug the PSU from A/C power and >>Clear CMOS<<?
In case a CMOS Clear does not change the situation, please take off the CPU again and check for broken/missing or bent pins. Also, test the board outside the case on a non-conducting surface in barebone configuration.

Similar Messages

How can I add a "Was this Topic Helpful" statement

RoboHelp 11
I'm sorry if this has come up and I wasn't able to find the anser, but is there any way to add a statement: Was this topic helpful? Yes No to the end of a topic. It seems many Help programs, including your own, have this capability. If this does not exist within RoboHelp 11, how can it be added? (And, how is it compiled.)
This may be a very naive question, but I'm grateful for any help.
Thanks!

First off – you do realize that this is a user-to-user forum, right? There’s no “including your own help” Adobe people here that you’re talking to ;>)
Try checking out these threads & links - http://www.grainge.org/pages/snippets/mailto.htm
http://forums.adobe.com/message/2238475#2238475
http://forums.adobe.com/message/1973043#1973043

Master's Research Topic (Help Wanted)

Hello Everyone,
I am looking for ideas in formulating a suitable masteru2019s research topic using ERP systems as the theme. I am also aware that a lot of research study has already been conducted in the area of SAP ERP implementation identifying the critical success factors for their failure and success.
This year our institute the u2018Durban University of Technologyu2019 joined the SAP UA and for the first time we will be exposing our 2nd and 3rd year I.T Business Analysis stream students practically (hands on) to an ERP package like SAP.
Hopefully you see some potential research avenues in this exercise.
However a fresh idea, new angle or new topic will be most welcomed and appreciated.
Kind regards,
Amar. Ramnarain

Hi Amar,
It is wonderful to hear how fast Durban Universityis is not only picking up ERP teaching but also getting involved in research related to SAP ERP. Indeed, there is a whole variety of possible research topics. I would recommend to look at ERP systems from different angles (analyze, model, develop, operate, use, evaluate etc.) and try to find your perspective of interest. Success factors for ERP implementation project (closely related to project management, ERP configuration as well as global/cultural/social aspects) have been researched thoroughly in the past years. I myself am researching the effect of different teaching/learning methods in global ERP curriculum design. You may have a look at the research topics in this forum to get a feel for how diverse academic research on very large business application can become. You may also visit and contribute to the UA Research wiki.
Our community members are happy to give you a helping hand once your research idea is being narrowed to a specific perspective.
Best regards to South Africa,
Stefan

Off, Off Topic Help Needed!

I am trying to find out if anyone has had this problem and
how they delt with it. A non profit asked me to redo their website
and I transfered it from GoLive to Dreamweaver. I have been
redesigning the website to look more professional. The main problem
I am having is the client is sending me amateur flyers and pdf's
riddled with run on sentences and poor grammer to post on the web
site. The graphics are terrible and need a lot of Photoshop help. I
cringe at the thought of posting anything like this to the website
I am working on. I have asked them just to send me the copy with an
idea of what they want but it seems to fall on deaf ears. I would
be very grateful for any thoughts or ideas on this? I try to get
along with all my clients but have never run into this problem!
Should I just post the work no matter how bad it is?

I hope the non-profit is not RIF (reading is fundemental).
One thing to keep in mind is that every site you do is a
billboard to the
world of your work, so if you post some bad work that you
could have fixed,
it is very possible, even likely that someone will see it and
assume the bad
all lies with you and it could cost you future work. (Yikes,
I just
noticed...that was a run on sentence).
You dont mention if you are getting paid, but if so, create
the quality work
and add it to the bill.
Gary
"graphicartist04" <[email protected]> wrote
in message
news:gr14ib$l0l$[email protected]..
>I am trying to find out if anyone has had this problem
and how they delt
>with
> it. A non profit asked me to redo their website and I
transfered it from
> GoLive
> to Dreamweaver. I have been redesigning the website to
look more
> professional.
> The main problem I am having is the client is sending me
amateur flyers
> and
> pdf's riddled with run on sentences and poor grammer to
post on the web
> site.
> The graphics are terrible and need a lot of Photoshop
help. I cringe at
> the
> thought of posting anything like this to the website I
am working on. I
> have
> asked them just to send me the copy with an idea of what
they want but it
> seems
> to fall on deaf ears. I would be very grateful for any
thoughts or ideas
> on
> this? I try to get along with all my clients but have
never run into this
> problem! Should I just post the work no matter how bad
it is?
>
>

ADF Code Corner 64 - Select Many Shuttle. Please help

Hello all.
I have developed exactly the same case as the one described in Code Corner 64.
The only difference is the VO names and the iterators.
The value of the Shuttle come the below piece of code:
    public Integer[] getSelectedIndxs() {
        selectedIndxs = null;
        selectedIndxList = new ArrayList<Integer>();
        //get all enterprise role for the current selected user role
        DCIteratorBinding aclDciter = ADFUtils.findIterator("ACLvo1Iterator");
        RowSetIterator rsi = aclDciter.getRowSetIterator();
        //get access to the "EnterpriseRolesVOIterator"
        DCIteratorBinding enterpriseRolesIter = ADFUtils.findIterator("EnterpriseRolesVOIterator");
        while(rsi.hasNext()){
            //Get the key of enterprise role of the ACL
            Row rw = rsi.next();
            Key key = new Key(new Object[] { (String)rw.getAttribute("EnterpriseRolesId") });
            enterpriseRolesIter.setCurrentRowWithKey(key.toStringFormat(true));
            int indx = enterpriseRolesIter.getCurrentRowIndexInRange();
            selectedIndxList.add(indx);
        selectedIndxs = selectedIndxList.toArray(new Integer[selectedIndxList.size()]);
        return selectedIndxs;
    }The value of "indx" looks fine in the debugger.
I have also printed the whole array list at the end, and looks fine.
The problem is that I get:
*<SimpleSelectManyRenderer> <_getSelectedItems> Could not find value:12 of type:java.lang.Integer among list of SelectItems*
*<SimpleSelectManyRenderer> <_getSelectedItems> Could not find value:13 of type:java.lang.Integer among list of SelectItems*
*<SimpleSelectManyRenderer> <_getSelectedItems> Could not find value:10 of type:java.lang.Integer among list of SelectItems*
*<SimpleSelectManyRenderer> <_getSelectedItems> Could not find value:11 of type:java.lang.Integer among list of SelectItems*
etc...
Should anyone has ANY idea please let me know. I'm going nuts with this...
Thanks a lot! I really appreciate
Edited by: apostolosk on Mar 15, 2012 12:06 PM

Finally the mistake was the returning index. I should had returned the values - not the index.
        ArrayList<String> selectedValues = new ArrayList<String>();
        //get all enterprise role for the current selected user role              //DCIteratorBinding aclDciter = (DCIteratorBinding)bindings.get("ACLvo1Iterator");
        DCIteratorBinding aclDciter = ADFUtils.findIterator("ACLvo1Iterator");
        aclDciter.executeQuery();
        RowSetIterator rsi = aclDciter.getRowSetIterator();
        Row[] rw1 = rsi.getAllRowsInRange();
        for (Row rowa : rw1){
        System.out.println("display row" + rowa.getAttribute("EnterpriseRolesId"));
            selectedValues.add((String)rowa.getAttribute("EnterpriseRolesId"));
        return selectedValues.toArray(new String[selectedValues.size()]);Thanks a lot.

Off Topic, Help with Batch Auto Cropping

I have 2000+ scanned slides (Nikon 4000 film scanner) in Tiff format, and there is a black band around each scanned slide (which is normal for slides - the scanned area is slightly larger than the picture area) that I want to get rid of. I am NOT going to crop them one at a time!! Does anyone know of a program that will do this automatically in batch mode? I once saw a program that would "auto Crop" photos but I can't remember the name. The slides are 30 years old ( hence the digitizing ) and I don't care too much about the accuracy, ie if it crops a little too much.
Thanks
-Robert

wish i could reward 100 points
me too ...
and another thing, once you do the l&S crop, if you want to move the location slightly, hit 'C' to bring up the crop HUD and the image goes back to full size again, but with the crop rectangle the same size as before and you can move it around if need be ...
this was an important thing that was introduced in 1.5.x along with l&s of straightening ...

Help button not working on R12

Hi
In my R12 envirionment, when I clicking on "help" button, is not working.
View topic - Help on web giving blank page..
Help me
Thanks
Neo
Edited by: user10764313 on Dec 1, 2011 9:51 AM

Please post the details of the application release, database version and OS.
In my R12 envirionment, when I clicking on "help" button, is not working.Not working means?
Was this working before? If yes, any changes been done recently?
Can you find any errors in the database/apache log files?
Can you reproduce the issue from different machines using different browsers?
Help mePlease elaborate more.
Thanks,
Hussein

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Load the dynamic values in shuttle

Hi,
I have one Managed bean which holds the arraylist. i want to load the list in to shuttle.
if possible help me to send the piece of code.
Thanks

The SRSkills.jspx page in the SRDemo Sample includes a shuttle. I'd recommend studying that working example for your situation, and modifying it as needed to work with your backing bean arraylist. This goes along with section "19.8 Creating a Shuttle" in the ADF Developer's Guide for Forms/4GL Developers.

"Help viewer cannot open this content"

In iPhoto '09 Help window I would get the following error message when I tried viewing any topic:
"Help viewer cannot open this content"
Problem solved with help from "Apple Expert" phone support following these steps:
1. reboot in safe mode - I think this clears system cache and runs a disk repair utility
2. reboot
3. delete ~/Library/Caches
4. empty trash
5. log out
6. log back in
7. empty trash
Apparently the problem was caused by a corrupt cached file.

This worked for me.
From http://www.thexlab.com/faqs/helpviewer.html#Anchor-Reset-35882
Quit Help Viewer if it is open. Leopard users should click the red Close button in the upper-left corner of the Help Viewer window. Users of Tiger and earlier can press the Command-Q (Quit) keyboard shortcut.
Trash the following three files in your Home > Library > Preferences folder, if extant:
* com.apple.help.plist
* com.apple.helpui.plist
* com.apple.helpviewer.plist
Trash the following two folders in your Home > Library > Caches folder, if extant:
1. com.apple.helpui folder
2. com.apple.helpdata
Empty the Trash.
Test that Help Viewer is now operating normally.
Sell Apple stock before the market gets wind of this.
Message was edited by: LazloG

Shuttle slider missing in premiere elements

I don't see a shuttle slider in the trial version of premiere elements 11. I am used to using this from previous versions (6 and 7). Adobe help file says it exists: "To control the speed of the preview, drag the shuttle slider to the right. The clip plays faster the further you drag the shuttle slider. (http://help.adobe.com/en_US/premiereelements/using/WS64B7E535-DDDF-4e54-BCB6-7D3EAD039996. html)
Has anyone seen it in 11?
Thanks, Eric

Hi ,
Shuttle slider is available in PRE11 . It should be available in trial version also.

How to add specific help to home made vi or labview standalone application ??

Hi, i want to add help for my application, build using labview. so that the application becomes user friendly.
in my application there is one main VI and other 8-10 sub/sub-sub VI's. i want to place handling instructions and other help in the main VI's help menu.
Can anyone help me out for this issue?? how to add that help. currently that "search this vi's help" option is shown disabled in the application.
Solved!
Go to Solution.

Besides adding description and tip to each control and indicator, filling in the description in VI properties>Documentation, the LabVIEW Help (of all places) has information on using Microsoft tools to compile a help file. Just search for the topic 'Help'. As we have just seen, the hard part is getting the user to actually use the help.

Shuttle Example

Hi,
Anybody can share experience / example on how to use shuttle especially interacting with database.
Thanks.
Elton.

hi,
here is an example of the shuttle. The name of the shuttle should be provided. If u see the documentation the tag <shuttle> can take more properties. But for the sake of an example I have written the bare minimum to get the shuttle to work.
In the example below the trail list can also be data bound but usually if you want some items from the leading list to be transferred to the trailing list you may want to keep this list empty. However if you know that there are some items in the trail list then you can get the list by dataBinding as I have shown for the leading list using the contents tag for dataBinding.
The importance of each tag can be learnt from the developers guide easily.
I didn't know exactly what you meant when you said that you want to interact with the DB. In this example the dataBinding can be done by querying the DB and returning the information required to build the list. Ofcourse this will be done in your java class. If you use a jsp you can have a scriplet which queries the DB and creates a list that can be iterated with the sguttle components.
anyways here is a simple example.
<shuttle name ="Shuttle1" leadingHeader="LeadingListHeader"
                                  trailingHeader="TrailingListHeader" >
                                <leading >
                                  <list name="leadList" multiple="true" >
                                    <contents dataChild="${pageState.lead.leadList}">
                                      <option text="${uix.current.name}" value="${uix.current.value}" />
                                                                          </contents>
                                  </list>
                                </leading>
                                <trailing>
                                  <list name="trailList" multiple="true" >
                                    <contents >
                                    </contents>
                                  </list>
                                </trailing>
                              </shuttle>hope this helps.
regards,
raj

Unable to create topic in certain areas

i am trying to create a topic to answer a question i have. a question that i cant find the answer to anywhere on the internet, but it wont let me create a topic in certain areas including the place where i am planing on creating the topic. help would be appreciated, thanks in advance

You cannot create a topic on a Main Category level.
You must navigate within this main category and choose the one Category in which your technical question fits.
Example,
you cannot create a topic in the general main category "Mac OS X Snow Leopard": you must choose within SL, one more specific Category like "Using Mac OS X SL", or "Installation and Setup", etc.

Please help I don't know how to verify my apple I'd so I can download facebook

Please help me verify my apple Id I don't know how or where to go

Missy 143 wrote:
Please help me verify my apple Id I don't know how or where to go
See your other post on this Topic > Help please

Shuttle Exress Topics & Help

Similar Messages

Maybe you are looking for