SID table /BIC/SUSITMSTR does not contain a zero record

When checking my cube using RSRV, I get the error message above. I went to SE11 and confirmed that in our production system, the record with a SID = 0 is missing while it does exist in our development system. When I try to activate the master data, I get a message saying that it is already active.
The only way that I know of to fix this is inserting the zero record into the table directly using ABAP like so:
DATA WA_SUSITMSTR TYPE /BIC/SUSITMSTR.
WA_SUSITMSTR-SID = 0.
WA_SUSITMSTR-CHCKFL = 'X'.
WA_SUSITMSTR-DATAFL = 'X'.
WA_SUSITMSTR-INCFL = 'X'.
INSERT INTO /BIC/SUSITMSTR VALUES WA_SUSITMSTR.
COMMIT WORK.
Does anyone know of a better / safer way to fix this? I do not like messing with SID tables directly unless absolutely necessary. Btw, reloading master data did not fix this issue.
Thank you,
Dennis
Edited by: Dennis Staiger on Jul 28, 2008 9:33 PM
Code fixed

I did execute the ABAP code to manually create the zero SID and now things seem to be working fine. RSRV does also come up in green now.

Similar Messages

Table /BIC/YZ**** Does not exist

Hi BI experts,
Today I tried to delete some of the old entries in my master data table (a custom table, which has attributes & text). After deleting manually and tried to save, i get this information box Table /BIC?YZCUSTOMER does not exist. Message no. R7795.
Can anyone tell me, why i am getting this and not able to save my changes ? This deleted records are not used in any txn. data.
Thanks
Venkat

Thanks Radha,
This seems to be the solution. We implemented this note 1110324. Then I see this error not occurring, but i get different msg: No master data was deleted. When i checked the Help on that message, it says Message no. RSDMD129
No master data was deleted. Either because it was all being used, or because the user did not want to delete upon request.
Procedure
First delete the master data in the places, in which it is still being used:
1. In the InfoCube
2. As an attribute
3. In a hierarchy
Then try deleting again.
But I am quite sure that those intended to be deleted records are never used anywhere. They are just some dummy entries.
So any idea, how can i get over this issue ?
(But some entries i was able to delete one by one. some not). again sure they are not used anywhere.
Thanks once again..
Venkat
Edited by: venkat babu on Oct 8, 2009 3:31 PM
Edited by: venkat babu on Oct 8, 2009 3:36 PM

Load ODS - InfoObject: InfoObject does not contain alpa-conforming value

Hello everybody,
I get following error while uploading from ODS to InfoObject.
InfoObject /BIC/ZHOUSENUM does not contain alpa-conforming value 0000000000000000004.
The data flow is as follows: Transactional InfoSource -> ODS -> InfoObject.
In the Transfer Rules before ODS I have marked the Conversion check box. The data is populated into ODS without any problems.
I can even activate the ODS, which reporting enabled.
When I browse the ODS table with the option check conversion exits unmarked, I can see the value '0000000000000000004'.
But the upload into InfoObject master data failes
Any help appreciated.
TIA
pawel

sap_all onboard.
I assume, this infosource is locked, due to the fact it was system generated.
On the other hand, there is a s-note 559763 which says:
If an InfoObject is filled with ALPHA exits from an R/3 System, the BW assumes that the data is to arrive in the internal ALPHA format and therefore does not convert the data.
I know, it is about R/3 as source system, but I assume the same would be for BW.
p.

Infopack Error ( does not contain alpha conforming value 10)

When I try to run my infopack which pulla data from BW into APO, the data load fails with the error below:
"InfoObject /BIC/XXXX does not contain alpa-conforming value 10" when I click on the details icon, I get the following description.
Can somebody please throw some light on this as I am new to DP/BW. Appreciate your help if someone can help me with fixing this problem.
                                                                                Diagnosis
The system checked whether the loaded InfoObject value conforms to the
     conversion exit.The check failed.
For example:
The value '1' was loaded into an InfoObject with alpha exit, even though
     the value '0000000001' was expected.
System response
The load process has failed or the erroneous records are displayed in
     the monitor. This does not depend on how error handling is set up.
Procedure
Find out why the data does not conform to the conversion exit, and, if
     possible, correct the cause. Possible causes are errors in Business
     Content or an error in a customer exit in the source system.
If you cannot correct the problem, you have the option of removing the
     conversion exit on the InfoObject. However, since the system has already
     been converted, duplicates appear in the system again.
Thanks
Varun

Hello Varun,
BW expects your Key Figures to be stored in "alpha conforming format". This is can be roughly described as having 0s in front. For example, if your key figure value is 10, then the alpha conforming value of that is 000000000000000010 (assuming the number of chars in your KF is 18).
To correct the error do the following:
In your transfer rule in BW for InfoObject /BIC/XXXX, implement an ABAP routine that calls function module CONVERSION_EXIT_ALPHA_INPUT. Here an example of the ABAP code you should put in your transfer rule for /BIC/XXXX:
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input         = TRAN_STRUCTURE-/bic/xxxx
IMPORTING
   OUTPUT        = RESULT.
Hope this helps. Please post again if you have questions.

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Error remote table does not contain a primary key

I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer

I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer

Repos - logical table source does not contain mapping

Hi,
I have a repository question?
I do not have a fact table in my physical layer. Do I have to have one? I thought the fact table got created in the BM.
I do have a date table in the physical layer, but it isn't joined to any other table.
I added the PK from the date_dimention to my logical fact table.
when I open the properities of my logical date table it is mapped to the physical date table.
Now in answers, I can query the date_dimension without error.
But, when I query the fact table using the date key, I get this error.
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table CRTK_FACTS) does not contain mapping for [CRTK_FACTS.MASTER_AI_ID, CRTK_FACTS.INT_DOC_ID, CRTK_FACTS.DATE_KEY]. (HY000)
SQL Issued: SELECT CRTK_FACTS.MASTER_AI_ID saw_0, CRTK_FACTS.INT_DOC_ID saw_1, CRTK_FACTS.DATE_KEY saw_2 FROM CRTK ORDER BY saw_0, saw_1, saw_2
Anyone have any suggestions on what I am missing?
thanks,
Kathy

I don't have a fact table in the physical layer. Do you mean join between the date table and other dimension tables?
or do I have to build the fact table in the physical layer?
I have not built any hierarchies yet, working on it.

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

E-recruitment - Table does not contain visible columns

Guys,
I am currently working on the e-recruitment. I had came across this
Table does not contain visible columns
in the all the tab in Application Entry, Preselection, Selection, Offer face... Is it a configuration or is it a portal error?

Hello,
This is a simple configuration issue I guess if you are using EhP4. There are no table entries for the respective processes in table V_T77RCF_CDCYLST. Just go and configure for each process in User Interfaces > Administrator and Recruiter > Settings for Candidate Selection > Assign Columns for Candidate Shortlists the columns you would like to be displayed in each process based on the business requirement.
Regards,

SAP:E:000:Table 'T100 ' does not contain an entry for ' 000'?

Gurus,
when user is updating size grid in matl master, the third party legacy system is reciving the bwlow error:
SAP:E:000:Table 'T100 ' does not contain an entry for ' 000'
could u all pls advise as why this error occured?
Thanks in advance..

t100 is the table that holds all messages in SAP.
The key to access this table is the message class and the message number.
Reading the message that you provided, it looks like SAP is searching for a message number 000 without having a message class.
Do you use any exit with own programming ?
You probably need to debug the program to find the root cause

ORA-12014: table 'DBA' does not contain a primary key constraint

Hai
when implementing basic replication i got the below error.
ORA-12014: table 'DBA' does not contain a primary key constraint
I was wondering primary key is enable at remote table
Any idea about this
Regards
mohan
I am giving below example
AT master site
global_names=false in init.ora file
sql>create table dba(no number primary key);
table created
and create snapshot log
sql>create snapshot log on m1;
materilized view created
AT SNAPSHOT SITE
1.Create service using net8 stiring name like n1
2.create database link
sql>create public database link m3 connect to system identified by manager using 'n1';
Database link created.
3.when creating snapshot site i got below error
SQL> create snapshot snap1 refresh fast start with sysdate next sysdate+1/(24*60
*60) as select * from dba@m3;
create snapshot snap1 refresh fast start with sysdate next sysdate+1/(24*60*60)
as select * from dba@m3
ERROR at line 1:
ORA-12014: table 'DBA' does not contain a primary key constraint

Hello,
Please repost this question in the appropriate section of the Discussion Forum.
This forum is for general suggestions and feedback about the OTN site.
You can also use our new offering called OTN Service Network:
For Oracle Advice/Minimal Support (fee based) on the Oracle Database Server, Oracle9i Application Server Containers for J2EE (OC4J), Oracle9i JDeveloper, Reports, Forums, SQL*Plus, and PL/SQL, please go to: http://www.oracle.com/go/?&Src=912386&Act=45
For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink
Regards,
OTN

ORA-12014 table does not contain a primary key constraint

Hi
I have some existing Materialised Views I am trying to redeploy through OWB as its now our standard tool.
The existing code has
CREATE MATERIALIZED VIEW .......
.REFRESH ON DEMAND WITH ROWID AS
SELECT *
FROM apps.fafg_assets
When I create in OWB you only put the select statement, there is nowhere to put the 'with rowid ' part hence I get the following error on deployment;
ORA-12014: table 'FAFG_ASSETS' does not contain a primary key constraint
I cannot put a primary key on this table though so how do I get around this in OWB? Like I say writing the MV in PL/SQL putting the 'with rowid' bit makes it work?
Thanks

Hi...
I believe you'll need a PK so Oracle will know how to update the MV. Is there any particular reason for you not having a PK in FAFG_ASSETS table? As an alternative, you may want to create a new column in this table and having a table trigger/sequence populating this column.
But It looks like you are using EBS, so, I don't know if you can add new columns to tables.
See if this thread can help you:
Re: ORA-12014: table 'XXX' does not contain a primary key constraint
Regards,
Marcos

Dump showing that table does not contain any elements.

Hi All,
I have a table, with lead select.Based on the row selected, corresponding values of the row are filled in the input fields.
I filter the table and only those rows are displayed which has status "waiting". Now the problem is when there is only one row with status "waiting", and process it, its status changes to "done", as a result of which there is no row in the table, and i get following error:
Adapter error in INPUT_FIELD "IF_STATUS" of view "ZPWB.DISTRIBUTE_VIEW": Context binding for property VALUE cannot be resolved: The DISTRIBUTE_VIEW.1.PD_ITEMS_TAB node does not contain any elements
Can you please help out:)

I have now the same problem.
somebody found out what the solution is for that issue?
if i have an empty context i get a dump due to the context binding. what is the work around?

Request does not contain any saved update rules; rollback not possible

Hi,
In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
It failed due to activation error SID Generation. But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
If we try to delete, it shows job has been completed successfully with the following message:
Job started
Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
Delete running: DataStore object ZREBATE, from 630,138 to 630,138
Delete is scheduled; Selection conditions were substituted
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Job finished
I went to the table RSICCONT and checked the mentioned request. But I couldn't find delete option enabled. Even our basis team doesn't have authorization to delete the mentioned request from the standard table RSICCONT.
Request you to please help me how to handle this.
Regards,
Antony Jerald.

Hi Antony,
Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
3) change the records with respective values and active the request again
Regards
Jagan

Stack file that is generated does not contain any java components

We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
++++
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: EA4
Hostname...........: wipro
Install directory..: e:/usr/sap/EA4
Upgrade directory..: F:\EHPI\java
Database...........: Oracle
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
++++++
PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jun 28, 2010 9:21:23 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jun 28, 2010 9:21:24 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
Jun 28, 2010 9:21:24 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
++++++++++++++++++++++
[stack xml data: version=1.0]
[SPAM_CVERS]
ST-PI                         2005_1_7000006
LSOFE                         600       0015
SAP_AP                        700       0015
SAP_BASIS                     701       0003
SAP_ABA                       701       0003
SAP_BW                        701       0003
PI_BASIS                      701       0003
PLMWUI                        700       0002
SAP_APPL                      604       0002
EA-APPL                       604       0002
SAP_BS_FND                    701       0002
EA-IPPE                       404       0002
WEBCUIF                       700       0002
INSURANCE                     604       0002
FI-CA                         604       0002
ERECRUIT                      604       0002
ECC-DIMP                      604       0002
EA-DFPS                       604       0002
IS-UT                         604       0002
IS-H                          604       0003
EA-RETAIL                     604       0002
EA-FINSERV                    604       0002
IS-OIL                        604       0002
IS-PRA                        604       0002
IS-M                          604       0002
SEM-BW                        604       0002
FINBASIS                      604       0002
FI-CAX                        604       0002
EA-GLTRADE                    604       0002
IS-CWM                        604       0002
EA-PS                         604       0002
IS-PS-CA                      604       0002
EA-HR                         604       0005
SAP_HR                        604       0005
ECC-SE                        604       0002
[PRDVERS]
01200314690900000432SAP ERP ENHANCE PACKAGE       EHP2 FOR SAP ERP 6.0          sap.com                       EHP2 FOR SAP ERP 6.0                                                    -00000000000000
01200314690900000463SAP ERP ENHANCE PACKAGE       EHP4 FOR SAP ERP 6.0          sap.com                       EHP4 FOR SAP ERP 6.0                                                    -00000000000000
01200615320900001296                                                            sap.com                                                                                +00000000000000
01200615320900001469SAP ERP ENHANCE PACKAGE       EHP3 FOR SAP ERP 6.0          sap.com                       EHP3 FOR SAP ERP 6.0                                                    -00000000000000
01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01                                           +00000000000000
[SWFEATURE]
1                   01200615320900001296SAP ERP                       2005                          sap.com                       SAP ERP 6.0: SAP ECC Server
19                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
20                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Media
21                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
23                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
24                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
25                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
26                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
30                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
31                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
33                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
37                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
38                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
42                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
43                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
44                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
45                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
46                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
47                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
48                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
55                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
56                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
59                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
69                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
9                   01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
++++++++++++++++

Though we have configured Java in solution manager the stack file that is generated does not contain any java components
You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
Nelis

SID table /BIC/SUSITMSTR does not contain a zero record

Similar Messages

Maybe you are looking for