Siebel SOAP blank Message

Hi,
We are using a OOTB webservice "PersonService" which is used to Create, Update and Delete a Contact record. We have configured a JMS integration too which updates the Contact information on the Queue. The queue is getting the correct messages when we Update/Create/Delete the records using the Siebel UI.
However, the issue is when I am using the SOAP UI and change Contact using the web service we are getting multiple blank messages in the queue.
Also, we have identified that when we send only the Contact detail there is only one blank message , however when we include the address details along with contact detail we are getting multiple blank messages.
We are unable to find the source as to what could be creating an issue of sending the blank message and also why are we getting multiple messages when we include the address details. This is only when we use WebService to update/delete/create a Contact.
Please help if anybody has already faced a similar issue OR if any guess where to start looking into the issue.
Thank you :-)

So is there a question you wanted to ask?
tt2

Similar Messages

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

Mail regularly open the new blank message window

After Mail initial start the programm opens a new blank message window. When I try to close it I receive the message "Do you want to save it as a draft and work on it later?"
The new blank message window appears regularly every 4-5 minutes. How can I fix it? And thanks in advance for response and help.

Do you see the Outbox in Mail? Does it contain any messages?

How can I get a SOAP Error message in ABAP ?

Dear all.
I'm trying to get SOAP Error message during XI Interface.
I've got an Error ( T-code : sxi_monitor ) and I need to get the Error message and write to screen.
I used
CATCH CX_AI_APPLICATION_FAULT.
CATCH CX_AI_SYSTEM_FAULT.
but couldn't get the error message.
The Error occured as below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTSD0030' (structure 'stmt1'): java.sql.SQLException: FATAL ERROR: Column 'ORDER' does not exist in table 'ZTSD0030'</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I exactly need 'BOLD' style message.
Any help is appreciated.
Thanks!

Hi,
This is an application fault,
error log clearly saying that''ORDER' does not exist in table 'ZTSD0030'.
these are specific to interfaces, in order to handle those
u need to configure apllication log at 'SLG1' t.code.
i mean, u have to use following function moules to handle application log in ABAP Proxy .
i.e
APPL_LOG_WRITE_HEADER
APPL_LOG_WRITE_MESSAGES
APPL_LOG_WRITE_DB.
warm regards
mahesh.

BPM: System_Error" SOAP fault message received

Hi,
We upgraded SAP system from 4.7 to ERP2004 on 09/17/05.
We have XI-3.0 version from last 9 months and this BPM was working good so far. We have not changed anything in it except we upgraded the SAP system.
We are using ABAP proxy from SAP to send "userid"
message to XI-BPM and then it would make a Synchonous call to SAP system to get roles of those "usrid".
In the first step when it is sending data to XI an exception is raised and in the second step when it tries to make synchronous call to SAP we are getting error:
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="System_Error">SOAP fault message received</Trac
<Trace level="3" type="System_Error">SOAP fault code: Client</Trace>
<Trace level="3" type="System_Error">SOAP fault string: Error during c
I noticed that the XML name tag looks different now
Before upgrade when message was successful.
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_ECA_USRID xmlns:ns1="http://bcm.edu/common"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<USRID>CLARKSON</USRID>
<USRID>2_MA140016</USRID>
</ns1:MT_ECA_USRID>
After upgrade when message is failed
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_ECA_USRID xmlns:nr1="http://bcm.edu/common">
<USRID>AABULIMI</USRID>
<USRID>AB147899</USRID>
<USRID>ACHALL</USRID>
</nr1:MT_ECA_USRID>
You would notice that
" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
missing after upgrade.
I would appreciate if anyone could help me.
Mrudula

Hi,
Can you paste the full error message. Also take a look at the default trace log in Visual Admin. Set the logging for soap to debug.
Naveen

How to XI error message will mapped to the SOAP faul message-SOAP(Axis)

Hi,
Receiver end I am using SOAP (Axis) adapter and I am getting the system error and I am not getting the payload in SXMB_MONI.
What ever the error message how do MAP as a SOAP Fault message in SXMB_MONI.
I found the Solution from OSS note 1039369 but did not explain where to set what parameter and what modules...
SOAP Fault code
If parameter Category is XIAdaptger, Area SOAP, Code FAULT
In this case, parameters P1 and P2 may be set to the fault namespace and fault name. If these parameters are set, the SOAP fault code is set to namespace P1 and name P2. Otherwise, it is set as in other cases.
For all other cases
In this case, the SOAP fault code is set to namespace "http://sap.com/xi/XI/Message/30" and name category.area.code, where category, area, code represent the XI error category, area, and code values, respectively.
SOAP detail
If parameter ApplicationFault is set
The SOAP detail child is set to the XI application payload. If, however, the payload extraction mode is set to Envelope, the application payload is taken as the SOAP envelope and the SOAP detail content is set to its body content. Similarly, if the extraction mode is set to Body, the application payload is taken as the SOAP body and the SOAP detail content is set to its content.
Otherwise
No SOAP detail content is set in this case.
Examples
XI error element
<sap:Error ...>
<sap:Category>XIAdapterFramework</sap:Category>
<sap:Code area="MESSAGE">GENERAL</sap:Code>
<sap:AdditionalText>Failed to determine a receiver agreement for the given message.</sap:AdditionalText>
</sap:Error>
SOAP fault element
<soapenv:Fault>
<faultcode xmlns:ns1="http://sap.com/xi/XI/Message/30">ns1:XIAdapterFramework.MESSAGE.GENERAL</faultcode>
<faultstring>Failed to determine a receiver agreement for the given message.</faultstring>
<detail/>
</soapenv:Fault>
Help appriciated
Regards,
Venu.
Edited by: Venugopalarao Immadisetty on Sep 24, 2009 3:39 PM

Using Receiver SOAP Axis adapter and I am getting the below exception
XI error element
<sap:Error ...>
<sap:Category>XIAdapterFramework</sap:Category>
<sap:Code area="MESSAGE">GENERAL</sap:Code>
<sap:AdditionalText>Failed to determine a receiver agreement for the given message.</sap:AdditionalText>
</sap:Error>
and above exception how do I convert as a SOAP Fault message..
SOAP fault element
<soapenv:Fault>
<faultcode xmlns:ns1="http://sap.com/xi/XI/Message/30">ns1:XIAdapterFramework.MESSAGE.GENERAL</faultcode>
<faultstring>Failed to determine a receiver agreement for the given message.</faultstring>
<detail/>
</soapenv:Fault>
Any idea what modules need to add in Receiver SOAP Axis adapter.

BODI - Job Error " blank message,possibly due to insufficient memory

Ending up with below error while executing a DI job. The job uses a file of size 37 MB as source. As the error looks something related to memory. I have tried splitting up the input file into and executed the job. The job completed successfully without any error.
Could someone help me out to find any memory setting which needs to be investigated in the dataflow level to get a permanent solution for it.
Expecting for help !!!
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050406: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF|Dataflow SM_DM_ACCESS_LOG_DTL_F_DF
Data flow <SM_DM_ACCESS_LOG_DTL_F_DF> received a bad system message. Message text from the child process is <blank message, possibly due to insufficient memory>. The process executing data flow <SM_DM_ACCESS_LOG_DTL_F_DF> has died abnormally. For NT,
please check errorlog.txt. For HPUX, please check stack_trace.txt. Please notify Customer Support.
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050409: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF
The job process could not communicate with the data flow <SM_DM_ACCESS_LOG_DTL_F_DF> process. For details, see previously
logged error <50406>.
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050409: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF
The job process could not communicate with the data flow <SM_DM_ACCESS_LOG_DTL_F_DF> process. For details, see previously
logged error <50406>.

Hi,
loading a 37MB file shouldnt be a problem without splitting it. i´ve loaded GB size flatfiles without problems.
Did you checked the error.txt as stated in the message? Whats in there.
If you split the file and you can load it, you have enough space in your DB.
Please check the memory utilization of your server during executing the job with one file. Maybe the Server is too busy...what would be strange with a 37MB file.
Regards
-Seb.

Error:SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. --- There is an error in XML document (1, 447). --- Input string was not in a correct format.

Hi All,
We have a scenario of FTP-->PI---> Webservice. While triggering the data in the FTP, it is failing in the PI with the below error
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 447). ---> Input string was not in a correct format.
Can you please help?

Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format.

Messages icon indicates that there is an unopened message but when i go into it the message is blank and no option to delete it. Any ideas how i can get rid of this and stop it from opening up in the blank message each time i open my messages?

The message icon on my iphone indicates that there is an unopened text message, but when i go into it, it just opens up a blank message, and there is no option to delete it. Any suggestions how i can get rid of this message, and prevent my phone from always opening up in the blank message whenever i go into my messages, rather than just opening as my inbox?
Many thanks

Hard restart.. While the phone is powered in, hold the power and home button. Hold them down and keep them held down. the phone will eventually shut itself off and reopen. keep held down till you see the appl elogo, then release. This will not delete anything off your phone, it will just force all apps to stop their current process. If you just turn the phone on and off, it will just pick up where it left off. Good luck

Blank message when I send a video via a text message

I got a replacement iPhone 4s last week. Whenever I try and send a video (shot using the phone) via text message, the recipient (who uses an iPhone) gets a blank message, but are able to get pictures? Do I need to check certain settings?

I would say the carrier is compressing the file to send. Since the two of you are on Verizon, they might not do it on their system, but when they cross systems, (AT&T) they compress for reducing bandwidth. Why don't you send via iMessage?

Blank Message Box when Saving a report in InfoView

Post Author: Jmusser
CA Forum: Administration
I'm getting a blank message box when I try to save any report from any folder in infoview for users I have setup in the following Group. Has anyone run into this on know what is set wrong in security?
We are running BOXI2. I have setup a custom security group for InfoView Users that grants rights to the following in Home > BusinessObjects Enterprise Applications > InfoView >- all other rights are not specified
Log on to InfoView and view this object in the CMC
Edit this object
Search for simple text
Do an advanced search
Filter object listing by object type
View the favorites folder
View the Inbox
Create categories
Assign categories
Send documents
Create folders
At the top level folder I have permissions granted as
General
Add objects to the folder
Denied
View objects
Granted
Granted
Edit objects
Granted
Granted
Modify the rights users have to objects
Denied
Schedule the document to run
Denied
Delete objects
Denied
Define server groups to process jobs
Denied
Delete instances
Denied
Copy objects to another folder
Granted
Granted
Schedule to destinations
Denied
View document instances
Granted
Granted
Pause and Resume document instances
Denied
Securely modify rights users have to objects.
Denied
Reschedule instances
Denied
Schedule on behalf of other users
Denied
Allow discussion threads
Granted
Granted
View objects that the user owns
Granted
Granted
Edit objects that the user owns
Granted
Granted
Modify the rights users have to objects that the user owns
Denied
Delete objects that the user owns
Granted
Granted
Delete instances that the user owns
Granted
Granted
View document instances that the user owns
Granted
Granted
Pause and Resume document instances that the user owns
Granted
Granted
Securely modify rights users have to objects that the user owns.
Denied
Reschedule instances that the user owns
Denied
Desktop Intelligence
Refresh the report's data
Granted
Granted
Refresh List of Values
Granted
Granted
Use Lists of Values
Granted
Granted
View SQL
Denied
Export the report's data
Granted
Granted
Download files associated with the object
Granted
Granted
Desktop Intelligence Add in
Download files associated with the object
Granted
Granted
Desktop Intelligence Template
Download files associated with the object
Granted
Granted
Report
Print the report's data
Granted
Granted
Refresh the report's data
Granted
Granted
Export the report's data
Granted
Granted
Download files associated with the report
Granted
Granted
Web Intelligence Document
Refresh the report's data
Granted
Granted
Edit Query
Denied
Refresh List of Values
Granted
Granted
Use Lists of Values
Granted
Granted
View SQL
Denied
Export the report's data
Granted
Granted
Download files associated with the object
Granted
Granted

Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know.

How to get the total SOAP XI message as output in file?

Hi all,
i had done a scenario Mail - XI -File . if i used XIPAYLOAD and check mail package then the file adapter gives the output in ximail30.xsd format. I want the whole SOAP XI messages and also the internal message which we can see in url
http://server:port/MessagingSystem/ as output in the text file.
how can we configure mail adapter to give SOAP XI messages and also the internal message as output in the text file.
Anyone have a idea to solve this please help me.

Use the TCP gateway if you want this for monitoring,
/people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway
Regards
Bhavesh

SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPT

Hi there,
I am trying to publish a file from SAP as web service using XI and SOAP Adapter.
I am using ABAP proxy to get the data into XI.
Designing and Configuration in XI has no problems because when i use File adapter the data is trasmitted to FTP server.
But when I used SOAP Reciever adapter I am getting following error in RWB
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Error during parsing of SOAP header.
Scenario: SAP ABAP Proxy -> XI -> WebService. Asynchronous.
SOAP Receiver adaptor.
Target URL http://<host>:<port number >/sap/xi/engine?type=entry&version=3.0&Sender.Service=SAPDC2653&Interface=urn:bzttest:00:hsa:test%5EOB_MI_BZT_TEST&QualityOfService=ExactlyOnce
Do not use SOAP Envelop is checked.
SOAP Action http://sap.com/xi/WebService/soap1.1
What i am missing here? How should I solve this problem?
Any help is appreciated,
Thx,
Yogi

Say there's a bapi/rfc that you want to call on an R/3 backend (e.g. 4.6c). On it's own, the R/3 system cannot expose the rfc/bapi as a web service, but XI can. So in this case, the scenario would be:
WS client -> XI -> R/3
When XI "exposes" a web service, it is exposing a service for a receiving system (in the above example, the R/3 system). XI itself does not provide or contain the service implementation. When XI exposes a web service, it is always done via the sender soap adapter (i.e. if soap adapter is used). Receiver soap adapter is used to call or consume an actual web service from an external application.
Regards,
Jin

PI 7.1 Adapter Module Development - Identify SOAP Fault Message

Hi Experts,
here's a PI 7.1 Adapter Module Development issue I hope you can help me to resolve. It's about identifying SOAP fault messages.

Scenario at a glance:
Adapter Modules placed in the modules chain at request and response time in a synchronous Scenario:
- Request: SOAP Axis to RFC 
- Response and Fault Response: RFC to SOAP Axis

The issue is how to identify SOAP fault message in SOAP Axis Adapter Module in the response message:
The client gets SOAP fault messages like the follwong one:
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <ns1:exception xmlns:ns1="http://typen.geschaeftsstelle.pab.barmer.de">
 <ns1:errortext>bla bla bla ...</ns1:errortext>
 </ns1:exception>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>


But when trying to access the tags faultcode and/or faultstring in the adapter module via xPath expressions I do not get them. Obviously the SOAP Fault tags are built AFTER the adapter module has been passed. So my question is:
How can I clearly/uniquely detect a SOAP fault response message (and distinguish it from a "normal" response message) in my SOAP Axis Adapter Module?

I tried it the following way:


// Check Message Payload for SOAP Fault Message via xPath expressions
...
// SOAP Fault Code
zv_xPression = zc_constXPattern.replaceFirst("&", "faultcode");
zv_soapFaultCode = XPathAPI.eval(zv_doc, (String) zv_xPression).toString();
// SOAP Fault String
zv_xPression = zc_constXPattern.replaceFirst("&", "faultstring");
zv_soapFaultString = XPathAPI.eval(zv_doc, (String) zv_xPression).toString();
// check for SOAP Fault Message
if (zv_soapFaultCode.equals("") && zv_soapFaultString.equals("")) {
 // Create Audit Log entry - NOT a SOAP Fault Message
 zv_msgText = zc_constModuleName + " 0190: xPath - OK! This message is NOT a SOAP Fault Message";
 zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.SUCCESS, zv_msgText);
 zv_faultCheck = false;
}
else {
 ...
 // Create Audit Log entry - SOAP Fault Message
 zv_msgText = zc_constModuleName 
 + " 0200: xPath - this message is a SOAP Fault Message. " 
 + " - Faultcode is: " + zv_soapFaultCode 
 + " - Faultstring is: " + zv_soapFaultString; 
 zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.ERROR, zv_msgText);
 ...
}
...

But zv_soapFaultCode and zv_soapFaultString are always empty (with other payload tags this coding works fine).

Any ideas? 
Thanx very much in advance!
Regards,
Volker

Hi Alex!
Like already mentioned I solved my problem by identifying the SOAP exception with the messageClass attribute of the PI message header. Acess code:
try {
String zv_msgClass = zv_piMsg.getMessageClass().toString();
} catch (Exception e) {
zv_msgText = zc_constModuleName
+ " E0110: Message processing terminated."
+ " Reason: Error while getting MessageClass "
+ zv_dataSource
+ e;
// create trace and audit log entry (severity ERROR) for exception
zv_location.errorT(ZV_SIGNATURE, zv_msgText);
zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.ERROR, zv_msgText);
ModuleException me = new ModuleException(e);
zv_location.throwing(ZV_SIGNATURE, me);
e.printStackTrace();
throw me;
} // end of try-catch-block
But I do not think this will solve your problem. I am almost sure, that something in your Axis configuration is wrong/missing. If a handler cannot be instatiated then it really may be missing. Have a look at defaultTrace.trc. Maybe you will find more suitable information about the root cause of your problem. Also have a look at NWA under software components and/or application modules if you can find/see your modules.
But there is a general issue when trying to catch PI fault messages. If e.g. the requestor tries to login with wrong userid/pasword, then you will have no chance to catch this kind of error - at least as far as I know. Because in this very early stage of PI message processing no module is called.
One last question: Did you develop your own Adapter or just an adapter module? In the first case: Is your adapter started and healthy? Have a look at RWB -> communication channel monitoring.
Regards,
Volker

SOAP : response message contains an error Application/UNKNOWN/APPLICATION_E

Hi All,
I am working in a Proxy to SOAP synchronous scenario. Message is processing successfully through IE but i am getting the below error in receiver (SOAP) communication channel.
SOAP : response message contains an error Application/UNKNOWN/APPLICATION_ERROR.
Please suggest what will be possible way out to resolve this issue.
Thanks,
Priya Ranjan

Dear Priya
Have you configured Fault Message for this scenario.
This kind of error is generally thrown by the end target system where the message is not processed succesfully due to some error in there system.
Sourabh

Siebel SOAP blank Message

Similar Messages

Maybe you are looking for