Signature not available in 10.1.3 MUI "non-english interface"

Hi,
I'm deploying Adode 10.1.3, but it seems to be impossible to have "Sign" option in French and Japanese interface ? Is there any way to show/activate this button in all languages ?
Thanks.

Hmmm, all websites announced this new functionnality, so that doesn't help me / it's not a good news.
Only 3/4 buttons to translate, I hope Adobe will have time to include it in 10.1.4...

Similar Messages

  • Sha256withrsa signature not available, what is wrong?

    Hi.
    I made a simple class and use the loadjava command to import it inside oracle database, then I compiled and create the function for the method in the class.
    All is fine at this point, but when I execute the function (SELECT sign('Hello') from dual) the function return "sha256withrsa signature not available" the JVM version in my oracle database is 1.5.0_10
    I downloaded that version and tested in netbeans and all works fine.
    what is wrong? I need to configure something else?
    I hope somene can help me.
    Best regards.

    Hi.
    I made a simple class and use the loadjava command to import it inside oracle database, then I compiled and create the function for the method in the class.
    All is fine at this point, but when I execute the function (SELECT sign('Hello') from dual) the function return "sha256withrsa signature not available" the JVM version in my oracle database is 1.5.0_10
    I downloaded that version and tested in netbeans and all works fine.
    what is wrong? I need to configure something else?
    I hope somene can help me.
    Best regards.

  • Signatures not available after 10.4.7

    It seems my Mail.app and 10.4.7 problem is more trivial than some of the disasters I see on this forum but it is annoying nonetheless.
    Firstly let me explain that Mail on my PowerBook would not show the new messages. I knew I had them because I could see them via webmail, and Growl acknowledged them as they arrived, but Mail would not admit to having them. I finally deleted my .Mac account and created it again and now that problem seem to be fixed.
    However, Mail on both my Macs refuses to let me use any of the seven signatures that I was using regularly. They are still there but when I select an account in the first column, the "Choose Signature" pull down remains greyed out. This is frustrating as I need them for work and have to copy and paste them each time.
    Anyone else found this?
    Michael
    G5 and Ti PowerBook    

    I´ve had the same problem but solved it with a little workaround:
    Assign signatures to Your accounts as usual, then change another information (e.g. account information - server name). This forces mail to save changes and - wow, You´ve got Your signatures back again.

  • Third generation ipod shows incorrect language and settings menu not avail.

    My thirty gig., third generation, Ipod shows the German language and the "settings" menu is not available to change the language back to English.Any help you can provide will be greatly appreciated. Thanks.

    I finally found that "settings" menu by trial and error and I was able to change the language back to english. It was a royal pita lol.

  • Nested virtualization not available in Solaris 11.2

    Hello!
    Anybody know why virtual hardware virtualization is not available for my Solaris 11.2 guest?
    I want to be able to use Solaris kernel zones.
    Host environment:
       SuperMicro A1SRM-2758F, 32GB RAM
       ESXi-5.5 (build 2302651)
    I know the CPU (Atom C2758) supports both VT-x and EPT that is required for 64bit virtualization nesting
    And browsing to:
       https://myip/mob/?moid=ha-host&doPath=capability
    Shows me that the (unsupported) feature is available:
       nestedHVSupported
    boolean
    true
    I have created a VM with vHardware vmx-10, selected 'Expose hardware assisted virtualization to the guest OS' and installed Solaris-11.2 as a guest.
    I have also checked that 'vhv.enable = "TRUE" ' is to be found in the vmx file.
    But from the Solaris guest Kernel zone are not available:
    # virtinfo
    NAME            CLASS
    vmware          current
    non-global-zone supported
    # uname -a
    SunOS global1 5.11 11.2 i86pc i386 i86pc
    Anybody have any ideas why this is not available. Worked fine in VMware Fusion.
    Best regards,
    - Morten Green Hermansen, Fanitas

    Hello jmattson!
    I tried to add:
      vvt.etmt.uc = "TRUE"
    to the vmx file and according to the log it got picked up:
    2015-03-31T20:03:40.790Z| vmx| I120: DICT
    featMask.vm.hv.capable = Min:1
    2015-03-31T20:03:40.790Z| vmx| I120: DICT           
    vhv.enable = TRUE
    2015-03-31T20:03:40.790Z| vmx| I120: DICT          
    vvt.etmt.uc = TRUE
    2015-03-31T20:03:40.790Z| vmx| I120: DICT sched.scsi0:4.throughputCap = off
    2015-03-31T20:03:40.790Z| vmx| I120: DICT sched.scsi1:3.throughputCap = off
    But Solaris will still not support kernel zones:
    # virtinfo
    NAME            CLASS
    vmware          current
    non-global-zone supported
    Will I then need to upgrade to ESXi-6 - and downgrade to the Web Client :'( for this to work?
    Best regards and thank you SO much for your help!
    - Morten Green Hermansen, Fanitas

  • Unable to calculate a request signature: Algorithm HmacSHA1 not available

    I develop one javaFx application.
    which upload the files on amazon s3 server.
    The application work fine when the executable jar of the application is made.
    But when the native packaging of the application is done. The .msi file is created and after installing this .msi the application started correctly but at the time of uploading file on s3 the "Unable to calculate a request signature: Algorithm HmacSHA1 not available" error occur in log file and files are not uploaded.
    The creation of the jar and native application is done by the com.zenjava maven plugin.

    Got the solution.After creating native bundle the bundle have its own private copy of jre this private jre does not contain "ext" folder which is present in regular jre.
    This causes the problem of cryptography which is the reason for above problem.

  • Just upgraded to Yosemite trying to add signature in Safari mail photo testing Annotations and trackpad is not available (greyed out) only camera is anyone have suggestions

    Just upgraded to Yosemite trying to add signature in Safari mail photo testing Annotations and trackpad is not available (greyed out) only camera is anyone have suggestions?

        I certainly understand the need to have an operable device!  Please DM me your name and mobile number, so I may further assist you.  Thank you!
    TominqueB_VZW
    Please follow us on Twitter @VZWSupport

  • LVM Volumes not available after update

    Hi All!
    I haven't updated my system for about two months and today I updated it. Now I have the problem that I cannot boot properly. I have my root partition in an LVM volume and on boot I get the message
    ERROR: device 'UUID=xxx' not found. Skipping fs
    ERROR: Unable to find root device 'UUID=xxx'
    After that I land in the recovery shell. After some research I found, that "lvm lvdisplay" showed that my volumes where not available and I had to reenable them with "lvm vgchange -a y".
    Issuing any lvm command also produced the following warning:
    WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
    Anyway, after issuing the commands and exiting the recovery shell, the system booted again. However, I would prefer being able to boot without manual actions.
    Thanks in advance!
    Further information:
    vgdisplay
    --- Volume group ---
    VG Name ArchLVM
    System ID
    Format lvm2
    Metadata Areas 1
    Metadata Sequence No 3
    VG Access read/write
    VG Status resizable
    MAX LV 0
    Cur LV 2
    Open LV 1
    Max PV 0
    Cur PV 1
    Act PV 1
    VG Size 232.69 GiB
    PE Size 4.00 MiB
    Total PE 59568
    Alloc PE / Size 59568 / 232.69 GiB
    Free PE / Size 0 / 0
    VG UUID SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5
    lvdisplay (LV Status was 'not available' right after booting)
    --- Logical volume ---
    LV Path /dev/ArchLVM/Swap
    LV Name Swap
    VG Name ArchLVM
    LV UUID XRYBrz-LojR-k6SD-XIxV-wHnY-f3VG-giKL6V
    LV Write Access read/write
    LV Creation host, time archiso, 2014-05-16 14:43:06 +0200
    LV Status available
    # open 0
    LV Size 8.00 GiB
    Current LE 2048
    Segments 1
    Allocation inherit
    Read ahead sectors auto
    - currently set to 256
    Block device 254:0
    --- Logical volume ---
    LV Path /dev/ArchLVM/Root
    LV Name Root
    VG Name ArchLVM
    LV UUID lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv
    LV Write Access read/write
    LV Creation host, time archiso, 2014-05-16 14:43:27 +0200
    LV Status available
    # open 1
    LV Size 224.69 GiB
    Current LE 57520
    Segments 1
    Allocation inherit
    Read ahead sectors auto
    - currently set to 256
    Block device 254:1
    /etc/fstab
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/mapper/ArchLVM-Root
    UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 / ext4 rw,relatime,data=ordered 0 1
    #/dev/mapper/ArchLVM-Root / ext4 rw,relatime,data=ordered 0 1
    # /dev/sda1
    UUID=72691888-a781-4cdd-a98e-2613d87925d0 /boot ext2 rw,relatime 0 2
    /etc/mkinitcpio.conf
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES=""
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run last, so it may be used to
    # override the actual binaries included by a given hook
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect block filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev block filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev block mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev block lvm2 filesystems"
    ## NOTE: If you have /usr on a separate partition, you MUST include the
    # usr, fsck and shutdown hooks.
    HOOKS="base udev autodetect modconf block lvm2 filesystems keyboard fsck"
    # COMPRESSION
    # Use this to compress the initramfs image. By default, gzip compression
    # is used. Use 'cat' to create an uncompressed image.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    #COMPRESSION="lz4"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    /boot/grub/grub.cfg
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="0"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod lvm
    insmod ext2
    set root='lvmid/SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5/lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint='lvmid/SoB3M1-v1fD-1abI-PNJ3-6IOn-FfdI-0RoLK5/lpjDl4-Jqzu-ZWkq-Uphc-IaOo-6Rzd-cIh5yv' 2db82d1a-47a4-4e30-a819-143e8fb75199
    else
    search --no-floppy --fs-uuid --set=root 2db82d1a-47a4-4e30-a819-143e8fb75199
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    fi
    terminal_input console
    terminal_output gfxterm
    if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
    # Fallback normal timeout code in case the timeout_style feature is
    # unavailable.
    else
    set timeout=5
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-2db82d1a-47a4-4e30-a819-143e8fb75199' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
    else
    search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
    fi
    echo 'Loading Linux linux ...'
    linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux.img
    submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-2db82d1a-47a4-4e30-a819-143e8fb75199' {
    menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-2db82d1a-47a4-4e30-a819-143e8fb75199' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
    else
    search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
    fi
    echo 'Loading Linux linux ...'
    linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux.img
    menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-2db82d1a-47a4-4e30-a819-143e8fb75199' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 72691888-a781-4cdd-a98e-2613d87925d0
    else
    search --no-floppy --fs-uuid --set=root 72691888-a781-4cdd-a98e-2613d87925d0
    fi
    echo 'Loading Linux linux ...'
    linux /vmlinuz-linux root=UUID=2db82d1a-47a4-4e30-a819-143e8fb75199 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    ### BEGIN /etc/grub.d/60_memtest86+ ###
    ### END /etc/grub.d/60_memtest86+ ###
    Last edited by Kirodema (2014-07-16 07:31:34)

    use_lvmetad = 0
    lvm2-lvmetad is not enabled or running on my system. Shall I activate it?
    # This is an example configuration file for the LVM2 system.
    # It contains the default settings that would be used if there was no
    # /etc/lvm/lvm.conf file.
    # Refer to 'man lvm.conf' for further information including the file layout.
    # To put this file in a different directory and override /etc/lvm set
    # the environment variable LVM_SYSTEM_DIR before running the tools.
    # N.B. Take care that each setting only appears once if uncommenting
    # example settings in this file.
    # This section allows you to set the way the configuration settings are handled.
    config {
    # If enabled, any LVM2 configuration mismatch is reported.
    # This implies checking that the configuration key is understood
    # by LVM2 and that the value of the key is of a proper type.
    # If disabled, any configuration mismatch is ignored and default
    # value is used instead without any warning (a message about the
    # configuration key not being found is issued in verbose mode only).
    checks = 1
    # If enabled, any configuration mismatch aborts the LVM2 process.
    abort_on_errors = 0
    # Directory where LVM looks for configuration profiles.
    profile_dir = "/etc/lvm/profile"
    # This section allows you to configure which block devices should
    # be used by the LVM system.
    devices {
    # Where do you want your volume groups to appear ?
    dir = "/dev"
    # An array of directories that contain the device nodes you wish
    # to use with LVM2.
    scan = [ "/dev" ]
    # If set, the cache of block device nodes with all associated symlinks
    # will be constructed out of the existing udev database content.
    # This avoids using and opening any inapplicable non-block devices or
    # subdirectories found in the device directory. This setting is applied
    # to udev-managed device directory only, other directories will be scanned
    # fully. LVM2 needs to be compiled with udev support for this setting to
    # take effect. N.B. Any device node or symlink not managed by udev in
    # udev directory will be ignored with this setting on.
    obtain_device_list_from_udev = 1
    # If several entries in the scanned directories correspond to the
    # same block device and the tools need to display a name for device,
    # all the pathnames are matched against each item in the following
    # list of regular expressions in turn and the first match is used.
    preferred_names = [ ]
    # Try to avoid using undescriptive /dev/dm-N names, if present.
    # preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
    # A filter that tells LVM2 to only use a restricted set of devices.
    # The filter consists of an array of regular expressions. These
    # expressions can be delimited by a character of your choice, and
    # prefixed with either an 'a' (for accept) or 'r' (for reject).
    # The first expression found to match a device name determines if
    # the device will be accepted or rejected (ignored). Devices that
    # don't match any patterns are accepted.
    # Be careful if there there are symbolic links or multiple filesystem
    # entries for the same device as each name is checked separately against
    # the list of patterns. The effect is that if the first pattern in the
    # list to match a name is an 'a' pattern for any of the names, the device
    # is accepted; otherwise if the first pattern in the list to match a name
    # is an 'r' pattern for any of the names it is rejected; otherwise it is
    # accepted.
    # Don't have more than one filter line active at once: only one gets used.
    # Run vgscan after you change this parameter to ensure that
    # the cache file gets regenerated (see below).
    # If it doesn't do what you expect, check the output of 'vgscan -vvvv'.
    # If lvmetad is used, then see "A note about device filtering while
    # lvmetad is used" comment that is attached to global/use_lvmetad setting.
    # By default we accept every block device:
    filter = [ "a/.*/" ]
    # Exclude the cdrom drive
    # filter = [ "r|/dev/cdrom|" ]
    # When testing I like to work with just loopback devices:
    # filter = [ "a/loop/", "r/.*/" ]
    # Or maybe all loops and ide drives except hdc:
    # filter =[ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
    # Use anchors if you want to be really specific
    # filter = [ "a|^/dev/hda8$|", "r/.*/" ]
    # Since "filter" is often overridden from command line, it is not suitable
    # for system-wide device filtering (udev rules, lvmetad). To hide devices
    # from LVM-specific udev processing and/or from lvmetad, you need to set
    # global_filter. The syntax is the same as for normal "filter"
    # above. Devices that fail the global_filter are not even opened by LVM.
    # global_filter = []
    # The results of the filtering are cached on disk to avoid
    # rescanning dud devices (which can take a very long time).
    # By default this cache is stored in the /etc/lvm/cache directory
    # in a file called '.cache'.
    # It is safe to delete the contents: the tools regenerate it.
    # (The old setting 'cache' is still respected if neither of
    # these new ones is present.)
    # N.B. If obtain_device_list_from_udev is set to 1 the list of
    # devices is instead obtained from udev and any existing .cache
    # file is removed.
    cache_dir = "/etc/lvm/cache"
    cache_file_prefix = ""
    # You can turn off writing this cache file by setting this to 0.
    write_cache_state = 1
    # Advanced settings.
    # List of pairs of additional acceptable block device types found
    # in /proc/devices with maximum (non-zero) number of partitions.
    # types = [ "fd", 16 ]
    # If sysfs is mounted (2.6 kernels) restrict device scanning to
    # the block devices it believes are valid.
    # 1 enables; 0 disables.
    sysfs_scan = 1
    # By default, LVM2 will ignore devices used as component paths
    # of device-mapper multipath devices.
    # 1 enables; 0 disables.
    multipath_component_detection = 1
    # By default, LVM2 will ignore devices used as components of
    # software RAID (md) devices by looking for md superblocks.
    # 1 enables; 0 disables.
    md_component_detection = 1
    # By default, if a PV is placed directly upon an md device, LVM2
    # will align its data blocks with the md device's stripe-width.
    # 1 enables; 0 disables.
    md_chunk_alignment = 1
    # Default alignment of the start of a data area in MB. If set to 0,
    # a value of 64KB will be used. Set to 1 for 1MiB, 2 for 2MiB, etc.
    # default_data_alignment = 1
    # By default, the start of a PV's data area will be a multiple of
    # the 'minimum_io_size' or 'optimal_io_size' exposed in sysfs.
    # - minimum_io_size - the smallest request the device can perform
    # w/o incurring a read-modify-write penalty (e.g. MD's chunk size)
    # - optimal_io_size - the device's preferred unit of receiving I/O
    # (e.g. MD's stripe width)
    # minimum_io_size is used if optimal_io_size is undefined (0).
    # If md_chunk_alignment is enabled, that detects the optimal_io_size.
    # This setting takes precedence over md_chunk_alignment.
    # 1 enables; 0 disables.
    data_alignment_detection = 1
    # Alignment (in KB) of start of data area when creating a new PV.
    # md_chunk_alignment and data_alignment_detection are disabled if set.
    # Set to 0 for the default alignment (see: data_alignment_default)
    # or page size, if larger.
    data_alignment = 0
    # By default, the start of the PV's aligned data area will be shifted by
    # the 'alignment_offset' exposed in sysfs. This offset is often 0 but
    # may be non-zero; e.g.: certain 4KB sector drives that compensate for
    # windows partitioning will have an alignment_offset of 3584 bytes
    # (sector 7 is the lowest aligned logical block, the 4KB sectors start
    # at LBA -1, and consequently sector 63 is aligned on a 4KB boundary).
    # But note that pvcreate --dataalignmentoffset will skip this detection.
    # 1 enables; 0 disables.
    data_alignment_offset_detection = 1
    # If, while scanning the system for PVs, LVM2 encounters a device-mapper
    # device that has its I/O suspended, it waits for it to become accessible.
    # Set this to 1 to skip such devices. This should only be needed
    # in recovery situations.
    ignore_suspended_devices = 0
    # ignore_lvm_mirrors: Introduced in version 2.02.104
    # This setting determines whether logical volumes of "mirror" segment
    # type are scanned for LVM labels. This affects the ability of
    # mirrors to be used as physical volumes. If 'ignore_lvm_mirrors'
    # is set to '1', it becomes impossible to create volume groups on top
    # of mirror logical volumes - i.e. to stack volume groups on mirrors.
    # Allowing mirror logical volumes to be scanned (setting the value to '0')
    # can potentially cause LVM processes and I/O to the mirror to become
    # blocked. This is due to the way that the "mirror" segment type handles
    # failures. In order for the hang to manifest itself, an LVM command must
    # be run just after a failure and before the automatic LVM repair process
    # takes place OR there must be failures in multiple mirrors in the same
    # volume group at the same time with write failures occurring moments
    # before a scan of the mirror's labels.
    # Note that these scanning limitations do not apply to the LVM RAID
    # types, like "raid1". The RAID segment types handle failures in a
    # different way and are not subject to possible process or I/O blocking.
    # It is encouraged that users set 'ignore_lvm_mirrors' to 1 if they
    # are using the "mirror" segment type. Users that require volume group
    # stacking on mirrored logical volumes should consider using the "raid1"
    # segment type. The "raid1" segment type is not available for
    # active/active clustered volume groups.
    # Set to 1 to disallow stacking and thereby avoid a possible deadlock.
    ignore_lvm_mirrors = 1
    # During each LVM operation errors received from each device are counted.
    # If the counter of a particular device exceeds the limit set here, no
    # further I/O is sent to that device for the remainder of the respective
    # operation. Setting the parameter to 0 disables the counters altogether.
    disable_after_error_count = 0
    # Allow use of pvcreate --uuid without requiring --restorefile.
    require_restorefile_with_uuid = 1
    # Minimum size (in KB) of block devices which can be used as PVs.
    # In a clustered environment all nodes must use the same value.
    # Any value smaller than 512KB is ignored.
    # Ignore devices smaller than 2MB such as floppy drives.
    pv_min_size = 2048
    # The original built-in setting was 512 up to and including version 2.02.84.
    # pv_min_size = 512
    # Issue discards to a logical volumes's underlying physical volume(s) when
    # the logical volume is no longer using the physical volumes' space (e.g.
    # lvremove, lvreduce, etc). Discards inform the storage that a region is
    # no longer in use. Storage that supports discards advertise the protocol
    # specific way discards should be issued by the kernel (TRIM, UNMAP, or
    # WRITE SAME with UNMAP bit set). Not all storage will support or benefit
    # from discards but SSDs and thinly provisioned LUNs generally do. If set
    # to 1, discards will only be issued if both the storage and kernel provide
    # support.
    # 1 enables; 0 disables.
    issue_discards = 0
    # This section allows you to configure the way in which LVM selects
    # free space for its Logical Volumes.
    allocation {
    # When searching for free space to extend an LV, the "cling"
    # allocation policy will choose space on the same PVs as the last
    # segment of the existing LV. If there is insufficient space and a
    # list of tags is defined here, it will check whether any of them are
    # attached to the PVs concerned and then seek to match those PV tags
    # between existing extents and new extents.
    # Use the special tag "@*" as a wildcard to match any PV tag.
    # Example: LVs are mirrored between two sites within a single VG.
    # PVs are tagged with either @site1 or @site2 to indicate where
    # they are situated.
    # cling_tag_list = [ "@site1", "@site2" ]
    # cling_tag_list = [ "@*" ]
    # Changes made in version 2.02.85 extended the reach of the 'cling'
    # policies to detect more situations where data can be grouped
    # onto the same disks. Set this to 0 to revert to the previous
    # algorithm.
    maximise_cling = 1
    # Whether to use blkid library instead of native LVM2 code to detect
    # any existing signatures while creating new Physical Volumes and
    # Logical Volumes. LVM2 needs to be compiled with blkid wiping support
    # for this setting to take effect.
    # LVM2 native detection code is currently able to recognize these signatures:
    # - MD device signature
    # - swap signature
    # - LUKS signature
    # To see the list of signatures recognized by blkid, check the output
    # of 'blkid -k' command. The blkid can recognize more signatures than
    # LVM2 native detection code, but due to this higher number of signatures
    # to be recognized, it can take more time to complete the signature scan.
    use_blkid_wiping = 1
    # Set to 1 to wipe any signatures found on newly-created Logical Volumes
    # automatically in addition to zeroing of the first KB on the LV
    # (controlled by the -Z/--zero y option).
    # The command line option -W/--wipesignatures takes precedence over this
    # setting.
    # The default is to wipe signatures when zeroing.
    wipe_signatures_when_zeroing_new_lvs = 1
    # Set to 1 to guarantee that mirror logs will always be placed on
    # different PVs from the mirror images. This was the default
    # until version 2.02.85.
    mirror_logs_require_separate_pvs = 0
    # Set to 1 to guarantee that cache_pool metadata will always be
    # placed on different PVs from the cache_pool data.
    cache_pool_metadata_require_separate_pvs = 0
    # Specify the minimal chunk size (in kiB) for cache pool volumes.
    # Using a chunk_size that is too large can result in wasteful use of
    # the cache, where small reads and writes can cause large sections of
    # an LV to be mapped into the cache. However, choosing a chunk_size
    # that is too small can result in more overhead trying to manage the
    # numerous chunks that become mapped into the cache. The former is
    # more of a problem than the latter in most cases, so we default to
    # a value that is on the smaller end of the spectrum. Supported values
    # range from 32(kiB) to 1048576 in multiples of 32.
    # cache_pool_chunk_size = 64
    # Set to 1 to guarantee that thin pool metadata will always
    # be placed on different PVs from the pool data.
    thin_pool_metadata_require_separate_pvs = 0
    # Specify chunk size calculation policy for thin pool volumes.
    # Possible options are:
    # "generic" - if thin_pool_chunk_size is defined, use it.
    # Otherwise, calculate the chunk size based on
    # estimation and device hints exposed in sysfs:
    # the minimum_io_size. The chunk size is always
    # at least 64KiB.
    # "performance" - if thin_pool_chunk_size is defined, use it.
    # Otherwise, calculate the chunk size for
    # performance based on device hints exposed in
    # sysfs: the optimal_io_size. The chunk size is
    # always at least 512KiB.
    # thin_pool_chunk_size_policy = "generic"
    # Specify the minimal chunk size (in KB) for thin pool volumes.
    # Use of the larger chunk size may improve performance for plain
    # thin volumes, however using them for snapshot volumes is less efficient,
    # as it consumes more space and takes extra time for copying.
    # When unset, lvm tries to estimate chunk size starting from 64KB
    # Supported values are in range from 64 to 1048576.
    # thin_pool_chunk_size = 64
    # Specify discards behaviour of the thin pool volume.
    # Select one of "ignore", "nopassdown", "passdown"
    # thin_pool_discards = "passdown"
    # Set to 0, to disable zeroing of thin pool data chunks before their
    # first use.
    # N.B. zeroing larger thin pool chunk size degrades performance.
    # thin_pool_zero = 1
    # This section that allows you to configure the nature of the
    # information that LVM2 reports.
    log {
    # Controls the messages sent to stdout or stderr.
    # There are three levels of verbosity, 3 being the most verbose.
    verbose = 0
    # Set to 1 to suppress all non-essential messages from stdout.
    # This has the same effect as -qq.
    # When this is set, the following commands still produce output:
    # dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
    # pvs, version, vgcfgrestore -l, vgdisplay, vgs.
    # Non-essential messages are shifted from log level 4 to log level 5
    # for syslog and lvm2_log_fn purposes.
    # Any 'yes' or 'no' questions not overridden by other arguments
    # are suppressed and default to 'no'.
    silent = 0
    # Should we send log messages through syslog?
    # 1 is yes; 0 is no.
    syslog = 1
    # Should we log error and debug messages to a file?
    # By default there is no log file.
    #file = "/var/log/lvm2.log"
    # Should we overwrite the log file each time the program is run?
    # By default we append.
    overwrite = 0
    # What level of log messages should we send to the log file and/or syslog?
    # There are 6 syslog-like log levels currently in use - 2 to 7 inclusive.
    # 7 is the most verbose (LOG_DEBUG).
    level = 0
    # Format of output messages
    # Whether or not (1 or 0) to indent messages according to their severity
    indent = 1
    # Whether or not (1 or 0) to display the command name on each line output
    command_names = 0
    # A prefix to use before the message text (but after the command name,
    # if selected). Default is two spaces, so you can see/grep the severity
    # of each message.
    prefix = " "
    # To make the messages look similar to the original LVM tools use:
    # indent = 0
    # command_names = 1
    # prefix = " -- "
    # Set this if you want log messages during activation.
    # Don't use this in low memory situations (can deadlock).
    # activation = 0
    # Some debugging messages are assigned to a class and only appear
    # in debug output if the class is listed here.
    # Classes currently available:
    # memory, devices, activation, allocation, lvmetad, metadata, cache,
    # locking
    # Use "all" to see everything.
    debug_classes = [ "memory", "devices", "activation", "allocation",
    "lvmetad", "metadata", "cache", "locking" ]
    # Configuration of metadata backups and archiving. In LVM2 when we
    # talk about a 'backup' we mean making a copy of the metadata for the
    # *current* system. The 'archive' contains old metadata configurations.
    # Backups are stored in a human readable text format.
    backup {
    # Should we maintain a backup of the current metadata configuration ?
    # Use 1 for Yes; 0 for No.
    # Think very hard before turning this off!
    backup = 1
    # Where shall we keep it ?
    # Remember to back up this directory regularly!
    backup_dir = "/etc/lvm/backup"
    # Should we maintain an archive of old metadata configurations.
    # Use 1 for Yes; 0 for No.
    # On by default. Think very hard before turning this off.
    archive = 1
    # Where should archived files go ?
    # Remember to back up this directory regularly!
    archive_dir = "/etc/lvm/archive"
    # What is the minimum number of archive files you wish to keep ?
    retain_min = 10
    # What is the minimum time you wish to keep an archive file for ?
    retain_days = 30
    # Settings for the running LVM2 in shell (readline) mode.
    shell {
    # Number of lines of history to store in ~/.lvm_history
    history_size = 100
    # Miscellaneous global LVM2 settings
    global {
    # The file creation mask for any files and directories created.
    # Interpreted as octal if the first digit is zero.
    umask = 077
    # Allow other users to read the files
    #umask = 022
    # Enabling test mode means that no changes to the on disk metadata
    # will be made. Equivalent to having the -t option on every
    # command. Defaults to off.
    test = 0
    # Default value for --units argument
    units = "h"
    # Since version 2.02.54, the tools distinguish between powers of
    # 1024 bytes (e.g. KiB, MiB, GiB) and powers of 1000 bytes (e.g.
    # KB, MB, GB).
    # If you have scripts that depend on the old behaviour, set this to 0
    # temporarily until you update them.
    si_unit_consistency = 1
    # Whether or not to display unit suffix for sizes. This setting has
    # no effect if the units are in human-readable form (global/units="h")
    # in which case the suffix is always displayed.
    suffix = 1
    # Whether or not to communicate with the kernel device-mapper.
    # Set to 0 if you want to use the tools to manipulate LVM metadata
    # without activating any logical volumes.
    # If the device-mapper kernel driver is not present in your kernel
    # setting this to 0 should suppress the error messages.
    activation = 1
    # If we can't communicate with device-mapper, should we try running
    # the LVM1 tools?
    # This option only applies to 2.4 kernels and is provided to help you
    # switch between device-mapper kernels and LVM1 kernels.
    # The LVM1 tools need to be installed with .lvm1 suffices
    # e.g. vgscan.lvm1 and they will stop working after you start using
    # the new lvm2 on-disk metadata format.
    # The default value is set when the tools are built.
    # fallback_to_lvm1 = 0
    # The default metadata format that commands should use - "lvm1" or "lvm2".
    # The command line override is -M1 or -M2.
    # Defaults to "lvm2".
    # format = "lvm2"
    # Location of proc filesystem
    proc = "/proc"
    # Type of locking to use. Defaults to local file-based locking (1).
    # Turn locking off by setting to 0 (dangerous: risks metadata corruption
    # if LVM2 commands get run concurrently).
    # Type 2 uses the external shared library locking_library.
    # Type 3 uses built-in clustered locking.
    # Type 4 uses read-only locking which forbids any operations that might
    # change metadata.
    # N.B. Don't use lvmetad with locking type 3 as lvmetad is not yet
    # supported in clustered environment. If use_lvmetad=1 and locking_type=3
    # is set at the same time, LVM always issues a warning message about this
    # and then it automatically disables lvmetad use.
    locking_type = 1
    # Set to 0 to fail when a lock request cannot be satisfied immediately.
    wait_for_locks = 1
    # If using external locking (type 2) and initialisation fails,
    # with this set to 1 an attempt will be made to use the built-in
    # clustered locking.
    # If you are using a customised locking_library you should set this to 0.
    fallback_to_clustered_locking = 1
    # If an attempt to initialise type 2 or type 3 locking failed, perhaps
    # because cluster components such as clvmd are not running, with this set
    # to 1 an attempt will be made to use local file-based locking (type 1).
    # If this succeeds, only commands against local volume groups will proceed.
    # Volume Groups marked as clustered will be ignored.
    fallback_to_local_locking = 1
    # Local non-LV directory that holds file-based locks while commands are
    # in progress. A directory like /tmp that may get wiped on reboot is OK.
    locking_dir = "/run/lock/lvm"
    # Whenever there are competing read-only and read-write access requests for
    # a volume group's metadata, instead of always granting the read-only
    # requests immediately, delay them to allow the read-write requests to be
    # serviced. Without this setting, write access may be stalled by a high
    # volume of read-only requests.
    # NB. This option only affects locking_type = 1 viz. local file-based
    # locking.
    prioritise_write_locks = 1
    # Other entries can go here to allow you to load shared libraries
    # e.g. if support for LVM1 metadata was compiled as a shared library use
    # format_libraries = "liblvm2format1.so"
    # Full pathnames can be given.
    # Search this directory first for shared libraries.
    # library_dir = "/lib"
    # The external locking library to load if locking_type is set to 2.
    # locking_library = "liblvm2clusterlock.so"
    # Treat any internal errors as fatal errors, aborting the process that
    # encountered the internal error. Please only enable for debugging.
    abort_on_internal_errors = 0
    # Check whether CRC is matching when parsed VG is used multiple times.
    # This is useful to catch unexpected internal cached volume group
    # structure modification. Please only enable for debugging.
    detect_internal_vg_cache_corruption = 0
    # If set to 1, no operations that change on-disk metadata will be permitted.
    # Additionally, read-only commands that encounter metadata in need of repair
    # will still be allowed to proceed exactly as if the repair had been
    # performed (except for the unchanged vg_seqno).
    # Inappropriate use could mess up your system, so seek advice first!
    metadata_read_only = 0
    # 'mirror_segtype_default' defines which segtype will be used when the
    # shorthand '-m' option is used for mirroring. The possible options are:
    # "mirror" - The original RAID1 implementation provided by LVM2/DM. It is
    # characterized by a flexible log solution (core, disk, mirrored)
    # and by the necessity to block I/O while reconfiguring in the
    # event of a failure.
    # There is an inherent race in the dmeventd failure handling
    # logic with snapshots of devices using this type of RAID1 that
    # in the worst case could cause a deadlock.
    # Ref: https://bugzilla.redhat.com/show_bug.cgi?id=817130#c10
    # "raid1" - This implementation leverages MD's RAID1 personality through
    # device-mapper. It is characterized by a lack of log options.
    # (A log is always allocated for every device and they are placed
    # on the same device as the image - no separate devices are
    # required.) This mirror implementation does not require I/O
    # to be blocked in the kernel in the event of a failure.
    # This mirror implementation is not cluster-aware and cannot be
    # used in a shared (active/active) fashion in a cluster.
    # Specify the '--type <mirror|raid1>' option to override this default
    # setting.
    mirror_segtype_default = "raid1"
    # 'raid10_segtype_default' determines the segment types used by default
    # when the '--stripes/-i' and '--mirrors/-m' arguments are both specified
    # during the creation of a logical volume.
    # Possible settings include:
    # "raid10" - This implementation leverages MD's RAID10 personality through
    # device-mapper.
    # "mirror" - LVM will layer the 'mirror' and 'stripe' segment types. It
    # will do this by creating a mirror on top of striped sub-LVs;
    # effectively creating a RAID 0+1 array. This is suboptimal
    # in terms of providing redundancy and performance. Changing to
    # this setting is not advised.
    # Specify the '--type <raid10|mirror>' option to override this default
    # setting.
    raid10_segtype_default = "raid10"
    # The default format for displaying LV names in lvdisplay was changed
    # in version 2.02.89 to show the LV name and path separately.
    # Previously this was always shown as /dev/vgname/lvname even when that
    # was never a valid path in the /dev filesystem.
    # Set to 1 to reinstate the previous format.
    # lvdisplay_shows_full_device_path = 0
    # Whether to use (trust) a running instance of lvmetad. If this is set to
    # 0, all commands fall back to the usual scanning mechanisms. When set to 1
    # *and* when lvmetad is running (automatically instantiated by making use of
    # systemd's socket-based service activation or run as an initscripts service
    # or run manually), the volume group metadata and PV state flags are obtained
    # from the lvmetad instance and no scanning is done by the individual
    # commands. In a setup with lvmetad, lvmetad udev rules *must* be set up for
    # LVM to work correctly. Without proper udev rules, all changes in block
    # device configuration will be *ignored* until a manual 'pvscan --cache'
    # is performed. These rules are installed by default.
    # If lvmetad has been running while use_lvmetad was 0, it MUST be stopped
    # before changing use_lvmetad to 1 and started again afterwards.
    # If using lvmetad, the volume activation is also switched to automatic
    # event-based mode. In this mode, the volumes are activated based on
    # incoming udev events that automatically inform lvmetad about new PVs
    # that appear in the system. Once the VG is complete (all the PVs are
    # present), it is auto-activated. The activation/auto_activation_volume_list
    # setting controls which volumes are auto-activated (all by default).
    # A note about device filtering while lvmetad is used:
    # When lvmetad is updated (either automatically based on udev events
    # or directly by pvscan --cache <device> call), the devices/filter
    # is ignored and all devices are scanned by default. The lvmetad always
    # keeps unfiltered information which is then provided to LVM commands
    # and then each LVM command does the filtering based on devices/filter
    # setting itself.
    # To prevent scanning devices completely, even when using lvmetad,
    # the devices/global_filter must be used.
    # N.B. Don't use lvmetad with locking type 3 as lvmetad is not yet
    # supported in clustered environment. If use_lvmetad=1 and locking_type=3
    # is set at the same time, LVM always issues a warning message about this
    # and then it automatically disables lvmetad use.
    use_lvmetad = 0
    # Full path of the utility called to check that a thin metadata device
    # is in a state that allows it to be used.
    # Each time a thin pool needs to be activated or after it is deactivated
    # this utility is executed. The activation will only proceed if the utility
    # has an exit status of 0.
    # Set to "" to skip this check. (Not recommended.)
    # The thin tools are available as part of the device-mapper-persistent-data
    # package from https://github.com/jthornber/thin-provisioning-tools.
    # thin_check_executable = "/usr/bin/thin_check"
    # Array of string options passed with thin_check command. By default,
    # option "-q" is for quiet output.
    # With thin_check version 2.1 or newer you can add "--ignore-non-fatal-errors"
    # to let it pass through ignorable errors and fix them later.
    # thin_check_options = [ "-q" ]
    # Full path of the utility called to repair a thin metadata device
    # is in a state that allows it to be used.
    # Each time a thin pool needs repair this utility is executed.
    # See thin_check_executable how to obtain binaries.
    # thin_repair_executable = "/usr/bin/thin_repair"
    # Array of extra string options passed with thin_repair command.
    # thin_repair_options = [ "" ]
    # Full path of the utility called to dump thin metadata content.
    # See thin_check_executable how to obtain binaries.
    # thin_dump_executable = "/usr/bin/thin_dump"
    # If set, given features are not used by thin driver.
    # This can be helpful not just for testing, but i.e. allows to avoid
    # using problematic implementation of some thin feature.
    # Features:
    # block_size
    # discards
    # discards_non_power_2
    # external_origin
    # metadata_resize
    # external_origin_extend
    # thin_disabled_features = [ "discards", "block_size" ]
    activation {
    # Set to 1 to perform internal checks on the operations issued to
    # libdevmapper. Useful for debugging problems with activation.
    # Some of the checks may be expensive, so it's best to use this
    # only when there seems to be a problem.
    checks = 0
    # Set to 0 to disable udev synchronisation (if compiled into the binaries).
    # Processes will not wait for notification from udev.
    # They will continue irrespective of any possible udev processing
    # in the background. You should only use this if udev is not running
    # or has rules that ignore the devices LVM2 creates.
    # The command line argument --nodevsync takes precedence over this setting.
    # If set to 1 when udev is not running, and there are LVM2 processes
    # waiting for udev, run 'dmsetup udevcomplete_all' manually to wake them up.
    udev_sync = 1
    # Set to 0 to disable the udev rules installed by LVM2 (if built with
    # --enable-udev_rules). LVM2 will then manage the /dev nodes and symlinks
    # for active logical volumes directly itself.
    # N.B. Manual intervention may be required if this setting is changed
    # while any logical volumes are active.
    udev_rules = 1
    # Set to 1 for LVM2 to verify operations performed by udev. This turns on
    # additional checks (and if necessary, repairs) on entries in the device
    # directory after udev has completed processing its events.
    # Useful for diagnosing problems with LVM2/udev interactions.
    verify_udev_operations = 0
    # If set to 1 and if deactivation of an LV fails, perhaps because
    # a process run from a quick udev rule temporarily opened the device,
    # retry the operation for a few seconds before failing.
    retry_deactivation = 1
    # How to fill in missing stripes if activating an incomplete volume.
    # Using "error" will make inaccessible parts of the device return
    # I/O errors on access. You can instead use a device path, in which
    # case, that device will be used to in place of missing stripes.
    # But note that using anything other than "error" with mirrored
    # or snapshotted volumes is likely to result in data corruption.
    missing_stripe_filler = "error"
    # The linear target is an optimised version of the striped target
    # that only handles a single stripe. Set this to 0 to disable this
    # optimisation and always use the striped target.
    use_linear_target = 1
    # How much stack (in KB) to reserve for use while devices suspended
    # Prior to version 2.02.89 this used to be set to 256KB
    reserved_stack = 64
    # How much memory (in KB) to reserve for use while devices suspended
    reserved_memory = 8192
    # Nice value used while devices suspended
    process_priority = -18
    # If volume_list is defined, each LV is only activated if there is a
    # match against the list.
    # "vgname" and "vgname/lvname" are matched exactly.
    # "@tag" matches any tag set in the LV or VG.
    # "@*" matches if any tag defined on the host is also set in the LV or VG
    # If any host tags exist but volume_list is not defined, a default
    # single-entry list containing "@*" is assumed.
    # volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
    # If auto_activation_volume_list is defined, each LV that is to be
    # activated with the autoactivation option (--activate ay/-a ay) is
    # first checked against the list. There are two scenarios in which
    # the autoactivation option is used:
    # - automatic activation of volumes based on incoming PVs. If all the
    # PVs making up a VG are present in the system, the autoactivation
    # is triggered. This requires lvmetad (global/use_lvmetad=1) and udev
    # to be running. In this case, "pvscan --cache -aay" is called
    # automatically without any user intervention while processing
    # udev events. Please, make sure you define auto_activation_volume_list
    # properly so only the volumes you want and expect are autoactivated.
    # - direct activation on command line with the autoactivation option.
    # In this case, the user calls "vgchange --activate ay/-a ay" or
    # "lvchange --activate ay/-a ay" directly.
    # By default, the auto_activation_volume_list is not defined and all
    # volumes will be activated either automatically or by using --activate ay/-a ay.
    # N.B. The "activation/volume_list" is still honoured in all cases so even
    # if the VG/LV passes the auto_activation_volume_list, it still needs to
    # pass the volume_list for it to be activated in the end.
    # If auto_activation_volume_list is defined but empty, no volumes will be
    # activated automatically and --activate ay/-a ay will do nothing.
    # auto_activation_volume_list = []
    # If auto_activation_volume_list is defined and it's not empty, only matching
    # volumes will be activated either automatically or by using --activate ay/-a ay.
    # "vgname" and "vgname/lvname" are matched exactly.
    # "@tag" matches any tag set in the LV or VG.
    # "@*" matches if any tag defined on the host is also set in the LV or VG
    # auto_activation_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
    # If read_only_volume_list is defined, each LV that is to be activated
    # is checked against the list, and if it matches, it as activated
    # in read-only mode. (This overrides '--permission rw' stored in the
    # metadata.)
    # "vgname" and "vgname/lvname" are matched exactly.
    # "@tag" matches any tag set in the LV or VG.
    # "@*" matches if any tag defined on the host is also set in the LV or VG
    # read_only_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
    # Each LV can have an 'activation skip' flag stored persistently against it.
    # During activation, this flag is used to decide whether such an LV is skipped.
    # The 'activation skip' flag can be set during LV creation and by default it
    # is automatically set for thin snapshot LVs. The 'auto_set_activation_skip'
    # enables or disables this automatic setting of the flag while LVs are created.
    # auto_set_activation_skip = 1
    # For RAID or 'mirror' segment types, 'raid_region_size' is the
    # size (in KiB) of each:
    # - synchronization operation when initializing
    # - each copy operation when performing a 'pvmove' (using 'mirror' segtype)
    # This setting has replaced 'mirror_region_size' since version 2.02.99
    raid_region_size = 512
    # Setting to use when there is no readahead value stored in the metadata.
    # "none" - Disable readahead.
    # "auto" - Use default value chosen by kernel.
    readahead = "auto"
    # 'raid_fault_policy' defines how a device failure in a RAID logical
    # volume is handled. This includes logical volumes that have the following
    # segment types: raid1, raid4, raid5*, and raid6*.
    # In the event of a failure, the following policies will determine what
    # actions are performed during the automated response to failures (when
    # dmeventd is monitoring the RAID logical volume) and when 'lvconvert' is
    # called manually with the options '--repair' and '--use-policies'.
    # "warn" - Use the system log to warn the user that a device in the RAID
    # logical volume has failed. It is left to the user to run
    # 'lvconvert --repair' manually to remove or replace the failed
    # device. As long as the number of failed devices does not
    # exceed the redundancy of the logical volume (1 device for
    # raid4/5, 2 for raid6, etc) the logical volume will remain
    # usable.
    # "allocate" - Attempt to use any extra physical volumes in the volume
    # group as spares and replace faulty devices.
    raid_fault_policy = "warn"
    # 'mirror_image_fault_policy' and 'mirror_log_fault_policy' define
    # how a device failure affecting a mirror (of "mirror" segment type) is
    # handled. A mirror is composed of mirror images (copies) and a log.
    # A disk log ensures that a mirror does not need to be re-synced
    # (all copies made the same) every time a machine reboots or crashes.
    # In the event of a failure, the specified policy will be used to determine
    # what happens. This applies to automatic repairs (when the mirror is being
    # monitored by dmeventd) and to manual lvconvert --repair when
    # --use-policies is given.
    # "remove" - Simply remove the faulty device and run without it. If
    # the log device fails, the mirror would convert to using
    # an in-memory log. This means the mirror will not
    # remember its sync status across crashes/reboots and
    # the entire mirror will be re-synced. If a
    # mirror image fails, the mirror will convert to a
    # non-mirrored device if there is only one remaining good
    # copy.
    # "allocate" - Remove the faulty device and try to allocate space on
    # a new device to be a replacement for the failed device.
    # Using this policy for the log is fast and maintains the
    # ability to remember sync state through crashes/reboots.
    # Using this policy for a mirror device is slow, as it
    # requires the mirror to resynchronize the devices, but it
    # will preserve the mirror characteristic of the device.
    # This policy acts like "remove" if no suitable device and
    # space can be allocated for the replacement.
    # "allocate_anywhere" - Not yet implemented. Useful to place the log device
    # temporarily on same physical volume as one of the mirror
    # images. This policy is not recommended for mirror devices
    # since it would break the redundant nature of the mirror. This
    # policy acts like "remove" if no suitable device and space can
    # be allocated for the replacement.
    mirror_log_fault_policy = "allocate"
    mirror_image_fault_policy = "remove"
    # 'snapshot_autoextend_threshold' and 'snapshot_autoextend_percent' define
    # how to handle automatic snapshot extension. The former defines when the
    # snapshot should be extended: when its space usage exceeds this many
    # percent. The latter defines how much extra space should be allocated for
    # the snapshot, in percent of its current size.
    # For example, if you set snapshot_autoextend_threshold to 70 and
    # snapshot_autoextend_percent to 20, whenever a snapshot exceeds 70% usage,
    # it will be extended by another 20%. For a 1G snapshot, using up 700M will
    # trigger a resize to 1.2G. When the usage exceeds 840M, the snapshot will
    # be extended to 1.44G, and so on.
    # Setting snapshot_autoextend_threshold to 100 disables automatic
    # extensions. The minimum value is 50 (A setting below 50 will be treated
    # as 50).
    snapshot_autoextend_threshold = 100
    snapshot_autoextend_percent = 20
    # 'thin_pool_autoextend_threshold' and 'thin_pool_autoextend_percent' define
    # how to handle automatic pool extension. The former defines when the
    # pool should be extended: when its space usage exceeds this many
    # percent. The latter defines how much extra space should be allocated for
    # the pool, in percent of its current size.
    # For example, if you set thin_pool_autoextend_threshold to 70 and
    # thin_pool_autoextend_percent to 20, whenever a pool exceeds 70% usage,
    # it will be extended by another 20%. For a 1G pool, using up 700M will
    # trigger a resize to 1.2G. When the usage exceeds 840M, the pool will
    # be extended to 1.44G, and so on.
    # Setting thin_pool_autoextend_threshold to 100 disables automatic
    # extensions. The minimum value is 50 (A setting below 50 will be treated
    # as 50).
    thin_pool_autoextend_threshold = 100
    thin_pool_autoextend_percent = 20
    # While activating devices, I/O to devices being (re)configured is
    # suspended, and as a precaution against deadlocks, LVM2 needs to pin
    # any memory it is using so it is not paged out. Groups of pages that
    # are known not to be accessed during activation need not be pinned
    # into memory. Each string listed in this setting is compared against
    # each line in /proc/self/maps, and the pages corresponding to any
    # lines that match are not pinned. On some systems locale-archive was
    # found to make up over 80% of the memory used by the process.
    # mlock_filter = [ "locale/locale-archive", "gconv/gconv-modules.cache" ]
    # Set to 1 to revert to the default behaviour prior to version 2.02.62
    # which used mlockall() to pin the whole process's memory while activating
    # devices.
    use_mlockall = 0
    # Monitoring is enabled by default when activating logical volumes.
    # Set to 0 to disable monitoring or use the --ignoremonitoring option.
    monitoring = 1
    # When pvmove or lvconvert must wait for the kernel to finish
    # synchronising or merging data, they check and report progress
    # at intervals of this number of seconds. The default is 15 seconds.
    # If this is set to 0 and there is only one thing to wait for, there
    # are no progress reports, but the process is awoken immediately the
    # operation is complete.
    polling_interval = 15
    # Report settings.
    # report {
    # Align columns on report output.
    # aligned=1
    # When buffered reporting is used, the report's content is appended
    # incrementally to include each object being reported until the report
    # is flushed to output which normally happens at the end of command
    # execution. Otherwise, if buffering is not used, each object is
    # reported as soon as its processing is finished.
    # buffered=1
    # Show headings for columns on report.
    # headings=1
    # A separator to use on report after each field.
    # separator=" "
    # Use a field name prefix for each field reported.
    # prefixes=0
    # Quote field values when using field name prefixes.
    # quoted=1
    # Output each column as a row. If set, this also implies report/prefixes=1.
    # colums_as_rows=0
    # Comma separated list of columns to sort by when reporting 'lvm devtypes' command.
    # See 'lvm devtypes -o help' for the list of possible fields.
    # devtypes_sort="devtype_name"
    # Comma separated list of columns to report for 'lvm devtypes' command.
    # See 'lvm devtypes -o help' for the list of possible fields.
    # devtypes_cols="devtype_name,devtype_max_partitions,devtype_description"
    # Comma separated list of columns to report for 'lvm devtypes' command in verbose mode.
    # See 'lvm devtypes -o help' for the list of possible fields.
    # devtypes_cols_verbose="devtype_name,devtype_max_partitions,devtype_description"
    # Comma separated list of columns to sort by when reporting 'lvs' command.
    # See 'lvs -o help' for the list of possible fields.
    # lvs_sort="vg_name,lv_name"
    # Comma separated list of columns to report for 'lvs' command.
    # See 'lvs -o help' for the list of possible fields.
    # lvs_cols="lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,move_pv,mirror_log,copy_percent,convert_lv"
    # Comma separated list of columns to report for 'lvs' command in verbose mode.
    # See 'lvs -o help' for the list of possible fields.
    # lvs_cols_verbose="lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert
    # Comma separated list of columns to sort by when reporting 'vgs' command.
    # See 'vgs -o help' for the list of possible fields.
    # vgs_sort="vg_name"
    # Comma separated list of columns to report for 'vgs' command.
    # See 'vgs -o help' for the list of possible fields.
    # vgs_cols="vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
    # Comma separated list of columns to report for 'vgs' command in verbose mode.
    # See 'vgs -o help' for the list of possible fields.
    # vgs_cols_verbose="vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile"
    # Comma separated list of columns to sort by when reporting 'pvs' command.
    # See 'pvs -o help' for the list of possible fields.
    # pvs_sort="pv_name"
    # Comma separated list of columns to report for 'pvs' command.
    # See 'pvs -o help' for the list of possible fields.
    # pvs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free"
    # Comma separated list of columns to report for 'pvs' command in verbose mode.
    # See 'pvs -o help' for the list of possible fields.
    # pvs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid"
    # Comma separated list of columns to sort by when reporting 'lvs --segments' command.
    # See 'lvs --segments -o help' for the list of possible fields.
    # segs_sort="vg_name,lv_name,seg_start"
    # Comma separated list of columns to report for 'lvs --segments' command.
    # See 'lvs --segments -o help' for the list of possible fields.
    # segs_cols="lv_name,vg_name,lv_attr,stripes,segtype,seg_size"
    # Comma separated list of columns to report for 'lvs --segments' command in verbose mode.
    # See 'lvs --segments -o help' for the list of possible fields.
    # segs_cols_verbose="lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize"
    # Comma separated list of columns to sort by when reporting 'pvs --segments' command.
    # See 'pvs --segments -o help' for the list of possible fields.
    # pvsegs_sort="pv_name,pvseg_start"
    # Comma separated list of columns to sort by when reporting 'pvs --segments' command.
    # See 'pvs --segments -o help' for the list of possible fields.
    # pvsegs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size"
    # Comma separated list of columns to sort by when reporting 'pvs --segments' command in verbose mode.
    # See 'pvs --segments -o help' for the list of possible fields.
    # pvsegs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges"
    # Advanced section #
    # Metadata settings
    # metadata {
    # Default number of copies of metadata to hold on each PV. 0, 1 or 2.
    # You might want to override it from the command line with 0
    # when running pvcreate on new PVs which are to be added to large VGs.
    # pvmetadatacopies = 1
    # Default number of copies of metadata to maintain for each VG.
    # If set to a non-zero value, LVM automatically chooses which of
    # the available metadata areas to use to achieve the requested
    # number of copies of the VG metadata. If you set a value larger
    # than the the total number of metadata areas available then
    # metadata is stored in them all.
    # The default value of 0 ("unmanaged") disables this automatic
    # management and allows you to control which metadata areas
    # are used at the individual PV level using 'pvchange
    # --metadataignore y/n'.
    # vgmetadatacopies = 0
    # Approximate default size of on-disk metadata areas in sectors.
    # You should increase this if you have large volume groups or
    # you want to retain a large on-disk history of your metadata changes.
    # pvmetadatasize = 255
    # List of directories holding live copies of text format metadata.
    # These directories must not be on logical volumes!
    # It's possible to use LVM2 with a couple of directories here,
    # preferably on different (non-LV) filesystems, and with no other
    # on-disk metadata (pvmetadatacopies = 0). Or this can be in
    # addition to on-disk metadata areas.
    # The feature was originally added to simplify testing and is not
    # supported under low memory situations - the machine could lock up.
    # Never edit any files in these directories by hand unless you
    # you are absolutely sure you know what you are doing! Use
    # the supplied toolset to make changes (e.g. vgcfgrestore).
    # dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
    # Event daemon
    dmeventd {
    # mirror_library is the library used when monitoring a mirror device.
    # "libdevmapper-event-lvm2mirror.so" attempts to recover from
    # failures. It removes failed devices from a volume group and
    # reconfigures a mirror as necessary. If no mirror library is
    # provided, mirrors are not monitored through dmeventd.
    mirror_library = "libdevmapper-event-lvm2mirror.so"
    # snapshot_library is the library used when monitoring a snapshot device.
    # "libdevmapper-event-lvm2snapshot.so" monitors the filling of
    # snapshots and emits a warning through syslog when the use of
    # the snapshot exceeds 80%. The warning is repeated when 85%, 90% and
    # 95% of the snapshot is filled.
    snapshot_library = "libdevmapper-event-lvm2snapshot.so"
    # thin_library is the library used when monitoring a thin device.
    # "libdevmapper-event-lvm2thin.so" monitors the filling of
    # pool and emits a warning through syslog when the use of
    # the pool exceeds 80%. The warning is repeated when 85%, 90% and
    # 95% of the pool is filled.
    thin_library = "libdevmapper-event-lvm2thin.so"
    # Full path of the dmeventd binary.
    # executable = "/usr/sbin/dmeventd"

  • The pool managing the instance is not available or the location monitoring object cannot be found

    SCOM Environment
    Windows 2012
    SQL 2012
    Everything patched and to latest build
    I've installed SCOM using the MS SCOM guidelines.  When I attempt to discovery, I get the error in the topic.
    Here is the details of the error.
    Note:  The following information was gathered when the operation was attempted.  The information may appear cryptic but provides context for the error.  The application will continue to run.
    Microsoft.EnterpriseManagement.Common.LocationObjectNotFoundException: The pool managing the instance is not available or the location monitoring object cannot be found.
       at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
       at Microsoft.EnterpriseManagement.Common.Internal.AdministrationServiceProxy.LaunchDiscovery(Guid batchId, IList`1 jobDefinitions)
       at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
       at 
    Thank you in advance for your help

    Installed it manually, but it's not showing up as pending.
    I also set it to accept manual installs.
    Logs
    02/10/2014 10:52:20,spid60,Unknown,Failed to verify Authenticode signature on DLL 'E:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\msxmlsql.dll'.
    02/10/2014 00:00:19,spid10s,Unknown,This instance of SQL Server has been using a process ID of 2952 since 2/7/2014 4:15:57 PM (local) 2/7/2014 9:15:57 PM (UTC). This is an informational message only; no user action is required.
    02/09/2014 00:00:12,spid15s,Unknown,This instance of SQL Server has been using a process ID of 2952 since 2/7/2014 4:15:57 PM (local) 2/7/2014 9:15:57 PM (UTC). This is an informational message only; no user action is required.
    02/08/2014 00:00:59,spid15s,Unknown,This instance of SQL Server has been using a process ID of 2952 since 2/7/2014 4:15:57 PM (local) 2/7/2014 9:15:57 PM (UTC). This is an informational message only; no user action is required.
    Should I uninstall and install SQL 2008?

  • "HSM Support Not Available" Error

    Hi,
    I'm trying to configure an HSM credential under LiveCycle ES2.  I've done all the steps listed in the documentation (established a Network Trust Link, assigned the client to a partition, etc.).  I'm able to run the demo app provided by the HSM vendor and am able to talk to the HSM.  When I try and configure the credential from the LiveCycle adminui, the Test HSM Connectivity fails with the following error in the log:
    2010-01-25 16:06:50,561 INFO  [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
    2010-01-25 16:06:53,817 INFO  [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
    2010-01-25 16:07:08,508 INFO  [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
    2010-01-25 16:07:08,509 ERROR [com.adobe.livecycle.signatures.client.types.exceptions.SignaturesBaseRuntimeException] ALC-DSS-300-000 Generic SignaturesBaseException  HSM Support not available (in the operation : getCredential)
    2010-01-25 16:07:08,594 INFO  [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
    2010-01-25 16:07:17,329 INFO  [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
    2010-01-25 16:07:17,332 ERROR [com.adobe.livecycle.signatures.client.types.exceptions.SignaturesBaseRuntimeException] ALC-DSS-300-000 Generic SignaturesBaseException  HSM Support not available (in the operation : getCredential)
    2010-01-25 16:07:17,354 INFO  [com.adobe.truststore.crypto.CryptoUtil] encryptBytes: Building secret key for length: 16
    2010-01-25 16:07:17,362 ERROR [com.adobe.livecycle.signatures.client.types.exceptions.SignaturesBaseRuntimeException] ALC-DSS-300-000 Generic SignaturesBaseException  HSM Support not available (in the operation : getSlotsWithTokens)
    2010-01-25 16:07:17,363 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.doRequiresNe w(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.dsc.transaction.Transa ctionCallback) throws com.adobe.idp.dsc.DSCException:
    ALC-DSS-300-000 Generic SignaturesBaseException  HSM Support not available (in the operation : getSlotsWithTokens)
    com.adobe.livecycle.signatures.hsm.HSMProvider.getSlotsWithTokens(HSMProvider.java:202)
    com.adobe.truststore.dsc.HSMCredentialHelper.listSlots(HSMCredentialHelper.java:101)
    com.adobe.truststore.dsc.CredentialServiceImpl.listSlots(CredentialServiceImpl.java:482)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:597)
    com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
    com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
    com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
    com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
    com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
    sun.reflect.GeneratedMethodAccessor388.invoke(Unknown Source)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:597)
    org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
    org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
    org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 73)
    org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
    org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
    org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
    org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
    org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
    org.jboss.ejb.Container.invoke(Container.java:960)
    org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
    org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
    $Proxy177.doRequiresNew(Unknown Source)
    com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
    com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
    com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
    com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
    com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188)
    com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
    com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
    com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
    com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
    com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
    com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
    com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
    com.adobe.truststore.ui.impl.TrustStoreProxy.getSlots(TrustStoreProxy.java:903)
    com.adobe.truststore.ui.struts.actions.UpdateHSMCommonAction.execute(UpdateHSMCommonActio n.java:63)
    org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
    org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    com.adobe.framework.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:1 73)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    com.adobe.truststore.ui.TSAuthFilter.doFilter(TSAuthFilter.java:63)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
    org.apache.catalina.core.ApplicationFilterChain.doFilter
    Any idea on what the problem might be?  Has anyone seen this before?
    We've configured HSMs on previous versions of LiveCycle before however this is our first attempt under ES2.
    Regards,
    Rob

    Ouch!  That's exactly what the problem is.  I'm using a 64-bit OS and 64-bit JVM.
    Can you point me to where in the docs this is?  The docs for 9.0 are not organized by product so I'm having some trouble finding it.  I've checked the
    "Preparing to Install", the "Installing and Deploying on JBoss", the "Administration Help", and the "Release Notes".  None of these mention the issue.
    Thanks for the help.
    Regards,
    Rob

  • Problem Installing VM: "Database is not available"

    I'm trying to install VM Manager 2.2 but when I get to creating the database I get this message:
    Checking the availability of the database ...
    Database is not available
    Please check log from /var/log/ovm-manager/db.log
    This is my db.log file:
    2010-07-06-10-19-11-AM
    Prepare to install the Oracle XE database ...
    2010-07-06-10-25-34-AM
    Prepare to install the Oracle XE database ...
    2010-07-06-10-27-50-AM
    Prepare to install the Oracle XE database ...
    Installing the oracle-xe-univ package (rpm) now ...
    warning: source/oracle-xe-univ-10.2.0.1-1.0.i386.rpm: Header V3 DSA signature: NOKEY, key ID b38a8516
    Preparing... ##################################################
    oracle-xe-univ ##################################################
    Executing Post-install steps...
    You must run '/etc/init.d/oracle-xe configure' as the root user to
    configure the database.
    Done
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-JUL-2010 10:32:52
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
    Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    Listener failed to start. See the error message(s) above...
    ORACLE instance started.
    Total System Global Area 805306368 bytes
    Fixed Size 1261444 bytes
    Variable Size 209715324 bytes
    Database Buffers 591396864 bytes
    Redo Buffers 2932736 bytes
    TO_CHAR(SYSTIMEST
    20100706 10:32:53
    Allocating device....
    Specifying datafiles...
    Specifing datafiles...
    Restoring ...
    Restore done.
    PL/SQL procedure successfully completed.
    TO_CHAR(SYSTIMEST
    20100706 10:33:34
    Control file created.
    PL/SQL procedure successfully completed.
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    ORACLE instance started.
    Total System Global Area 805306368 bytes
    Fixed Size 1261444 bytes
    Variable Size 209715324 bytes
    Database Buffers 591396864 bytes
    Redo Buffers 2932736 bytes
    Control file created.
    System altered.
    Database altered.
    Database altered.
    System altered.
    System altered.
    Database altered.
    Tablespace altered.
    TABLESPACE_NAME
    USERS
    SID PROGRAM SERIAL#
    USERNAME
    35 [email protected] (QMNC) 1
    39 [email protected] (TNS V1-V3) 1
    SYS
    40 [email protected] (MMNL) 3
    SID PROGRAM SERIAL#
    USERNAME
    41 [email protected] (MMON) 3
    42 [email protected] (RECO) 1
    43 [email protected] (SMON) 1
    SID PROGRAM SERIAL#
    USERNAME
    44 [email protected] (CKPT) 1
    45 [email protected] (LGWR) 1
    46 [email protected] (DBW0) 1
    SID PROGRAM SERIAL#
    USERNAME
    47 [email protected] (MMAN) 1
    48 [email protected] (PSP0) 1
    49 [email protected] (PMON) 1
    12 rows selected.
    User altered.
    User altered.
    System altered.
    Library created.
    Directory created.
    Commit complete.
    PL/SQL procedure successfully completed.
    Commit complete.
    PL/SQL procedure successfully completed.
    File created.
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    ORACLE instance started.
    Total System Global Area 805306368 bytes
    Fixed Size 1261444 bytes
    Variable Size 209715324 bytes
    Database Buffers 591396864 bytes
    Redo Buffers 2932736 bytes
    Database mounted.
    Database opened.
    'UTL_RECOMP_BEGIN:'||TO_CH
    utl_recomp_begin: 10:34:05
    PL/SQL procedure successfully completed.
    'UTL_RECOMP_END:'||TO_CH
    utl_recomp_end: 10:34:05
    User altered.
    User altered.
    User altered.
    User altered.
    User altered.
    User altered.
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:34:05 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Enter user-name: Enter password:
    ERROR:
    ORA-01005: null password given; logon denied
    Enter user-name: 2010-07-06-10-38-31-AM
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:38:51 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Enter user-name: Enter password:
    ERROR:
    ORA-01005: null password given; logon denied
    Enter user-name: 2010-07-06-10-51-18-AM
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:52:09 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Enter user-name: Enter password:
    ERROR:
    ORA-01005: null password given; logon denied
    Enter user-name: 2010-07-06-10-55-43-AM
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:55:53 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12541: TNS:no listener
    Enter user-name: Enter password:
    ERROR:
    ORA-01005: null password given; logon denied
    Enter user-name:

    Hi,
    I think it is essential to set the official ip and the correct hostname in the /etc/hosts file.
    Per default there is the loopback IP bound to the hostname and localhost, you should change this to the desired IP.
    it should be something like this:
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    192.168.1.1 yourhost.yourdomain yourhost
    Otherwise you will face some other nasty side-effects, with nfs for example.
    Hope that helps
    Michael

  • VM Manager Installation: "Database is not available" problem

    I'm trying to install VM Manager 2.2 but when I get to creating the database I get this message:
    Checking the availability of the database ...
    Database is not available
    Please check log from /var/log/ovm-manager/db.log
    This is my db.log file:
    2010-07-06-10-19-11-AM
    Prepare to install the Oracle XE database ...
    2010-07-06-10-25-34-AM
    Prepare to install the Oracle XE database ...
    2010-07-06-10-27-50-AM
    Prepare to install the Oracle XE database ...
    Installing the oracle-xe-univ package (rpm) now ...
    warning: source/oracle-xe-univ-10.2.0.1-1.0.i386.rpm: Header V3 DSA signature: NOKEY, key ID b38a8516
    Preparing... ##################################################
    oracle-xe-univ ##################################################
    Executing Post-install steps...
    You must run '/etc/init.d/oracle-xe configure' as the root user to
    configure the database.
    Done
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-JUL-2010 10:32:52
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
    Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    Listener failed to start. See the error message(s) above...
    ORACLE instance started.
    Total System Global Area 805306368 bytes
    Fixed Size 1261444 bytes
    Variable Size 209715324 bytes
    Database Buffers 591396864 bytes
    Redo Buffers 2932736 bytes
    TO_CHAR(SYSTIMEST
    20100706 10:32:53
    Allocating device....
    Specifying datafiles...
    Specifing datafiles...
    Restoring ...
    Restore done.
    PL/SQL procedure successfully completed.
    TO_CHAR(SYSTIMEST
    20100706 10:33:34
    Control file created.
    PL/SQL procedure successfully completed.
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    ORACLE instance started.
    Total System Global Area 805306368 bytes
    Fixed Size 1261444 bytes
    Variable Size 209715324 bytes
    Database Buffers 591396864 bytes
    Redo Buffers 2932736 bytes
    Control file created.
    System altered.
    Database altered.
    Database altered.
    System altered.
    System altered.
    Database altered.
    Tablespace altered.
    TABLESPACE_NAME
    USERS
    SID PROGRAM SERIAL#
    USERNAME
    35 [email protected] (QMNC) 1
    39 [email protected] (TNS V1-V3) 1
    SYS
    40 [email protected] (MMNL) 3
    SID PROGRAM SERIAL#
    USERNAME
    41 [email protected] (MMON) 3
    42 [email protected] (RECO) 1
    43 [email protected] (SMON) 1
    SID PROGRAM SERIAL#
    USERNAME
    44 [email protected] (CKPT) 1
    45 [email protected] (LGWR) 1
    46 [email protected] (DBW0) 1
    SID PROGRAM SERIAL#
    USERNAME
    47 [email protected] (MMAN) 1
    48 [email protected] (PSP0) 1
    49 [email protected] (PMON) 1
    12 rows selected.
    User altered.
    User altered.
    System altered.
    Library created.
    Directory created.
    Commit complete.
    PL/SQL procedure successfully completed.
    Commit complete.
    PL/SQL procedure successfully completed.
    File created.
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    ORACLE instance started.
    Total System Global Area 805306368 bytes
    Fixed Size 1261444 bytes
    Variable Size 209715324 bytes
    Database Buffers 591396864 bytes
    Redo Buffers 2932736 bytes
    Database mounted.
    Database opened.
    'UTL_RECOMP_BEGIN:'||TO_CH
    utl_recomp_begin: 10:34:05
    PL/SQL procedure successfully completed.
    'UTL_RECOMP_END:'||TO_CH
    utl_recomp_end: 10:34:05
    User altered.
    User altered.
    User altered.
    User altered.
    User altered.
    User altered.
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:34:05 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Enter user-name: Enter password:
    ERROR:
    ORA-01005: null password given; logon denied
    Enter user-name: 2010-07-06-10-38-31-AM
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:38:51 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Enter user-name: Enter password:
    ERROR:
    ORA-01005: null password given; logon denied
    Enter user-name: 2010-07-06-10-51-18-AM
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:52:09 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Enter user-name: Enter password:
    ERROR:
    ORA-01005: null password given; logon denied
    Enter user-name: 2010-07-06-10-55-43-AM
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:55:53 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12541: TNS:no listener
    Enter user-name: Enter password:
    ERROR:
    ORA-01005: null password given; logon denied
    Enter user-name:

    Fixed. I think it was a problem related to the hostname.

  • NoSuchAlgorithmException : Algorithm DESede not available

    Hi,
    Could any one tell me why this error comes
    The particular method which throws the Exception is
    SecretKeyFactory keyFactory = SecretKeyFactory.getInstance("DESede");
    The Exception stackTrace is
    java.security.NoSuchAlgorithmException: Algorithm DESede not available
    at javax.crypto.SunJCE_b.a(DashoA6275)
    at javax.crypto.SecretKeyFactory.getInstance(DashoA6275)
    at com.orbitech.armor.syncd.server.ArmorKeyTabFile.ReadKeyTabFile(ArmorK
    eyTabFile.java:173)
    at com.orbitech.armor.syncd.server.OracleRegistryPlugin.init(OracleRegis
    tryPlugin.java:210)
    at ArmorSystemServlet.processPrnInfo(ArmorSystemServlet.java:194)
    at ArmorSystemServlet.doPost(ArmorSystemServlet.java:137)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
    at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRun
    ner.java:533)
    com.orbitech.armor.syncd.server.ArmorException: Error in Reading Keytab file
    at com.orbitech.armor.syncd.server.ArmorKeyTabFile.ReadKeyTabFile(ArmorK
    eyTabFile.java:212)
    at com.orbitech.armor.syncd.server.OracleRegistryPlugin.init(OracleRegis
    tryPlugin.java:210)
    at ArmorSystemServlet.processPrnInfo(ArmorSystemServlet.java:194)
    at ArmorSystemServlet.doPost(ArmorSystemServlet.java:137)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
    at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRun
    ner.java:533)
    Im trying to use JCE api's in a servlet running under a iplanet ssl server. Also my classpath setting contains the jce jars as well.
    I am able to see very well the SunJCE provider and the algorithm are installed. The code I used too see them is
    System.out.println("Cipher algorithms : ");
    Object[] o = Security.getAlgorithms("Cipher").toArray();
    for (int i=0; i<o.length; i++) {
    System.out.println((String) o[ i ]);
    Cipher algorithms :
    BLOWFISH
    DESEDE
    PBEWITHMD5ANDTRIPLEDES
    DES
    PBEWITHMD5ANDDES
    System.out.println("MessageDigest algorithms : ");
    o = Security.getAlgorithms("MessageDigest").toArray();
    for (int i=0; i<o.length; i++) {
    System.out.println((String) o[ i ]);
    MessageDigest algorithms :
    MD5
    SHA
    System.out.println("Signature algorithms : ");
    o = Security.getAlgorithms("Signature").toArray();
    for (int i=0; i<o.length; i++) {
    System.out.println((String) o[ i ]);
    Signature algorithms :
    MD2WITHRSA
    MD5WITHRSA
    SHA1WITHDSA
    SHA1WITHRSA
    System.out.println("Mac algorithms : ");
    o = Security.getAlgorithms("Mac").toArray();
    for (int i=0; i<o.length; i++) {
    System.out.println((String) o[ i ]);
    Mac algorithms :
    HMACSHA1
    HMACMD5
    System.out.println("Keystore algorithms : ");
    o = Security.getAlgorithms("Keystore").toArray();
    for (int i=0; i<o.length; i++) {
    System.out.println((String) o[ i ]);
    Keystore algorithms :
    PKCS12
    JCEKS
    JKS
    System.out.println("Providers : ");
    Provider p[] = Security.getProviders();
    for(int i = 0; i<p.length; i++) {
    System.out.println( p.getName());
    Providers :
    SUN
    SunJSSE
    SunRsaSign
    SunJCE
    SunJGSS
    Thanks in advance
    regds........jp

    try this...it worked for me......
    put all four JCE jar files in the ext folder buried deep inside ur program files ...I have it in >> "C:\Program Files\Java\j2re1.4.1_02\lib\ext" folder .Now edit the file "C:\Program Files\Java\j2re1.4.1_02\lib\security\java.security" and add register ur provider by adding the line>> security.provider.2=com.sun.crypto.provider.SunJCE
    save the file and rerun the program..the exception should vanish..
    Sanjit R
    US Software Pvt Ltd
    Technopark,
    Trivandrum
    Kerala
    India

  • EPM Add-in not available in RRMX

    Hello All,
    EPM Add-in is installed and can be accessed through MS Excel.
    In our scenario, BEx Analyzer is accessed through RRMX Txn however EPM add-in tab is not available in the Excel. Our customer needs both BEx Analyzer add-in and EPM add-in the same Excel which is opened through RRMX.
    Why is EPM Add-in not available through RRMX ? How can I get both BEx and EPM add-ins in the same Excel thru RRMX?
    Thank You!

    Hi Rahul
    1. Could you share the SAP BEX, EPM add-in & MS office Application version details? if possible attache the error screen shot
    2.  Could you refer the SAP Notes
    1755238 - ALL: Character encoding issue - Bex Analyzer and EPM add-in
    1713116 - EPM Add-In 10 : EPM tab disappears from Excel because there is no digital signature available
    1849958 - EPM Add-in: Error launching office client
    BR
    SS

  • Not available to search message in QBE

    Hi gang,
    I'm seeing:
    Column Type Column Condition Comments
    1. IMAGE_RECNBR None
    2. ADDR_WHO no image not available to search None
    3. ADDRTYPE_WHO no image not available to search None
    4. ADDRESS1 no image not available to search None
    5. ADDRESS2 no image not available to search None
    6. CITY no image not available to search None
    on the QBE page for most tables. I'm not able to find any reference to the "no image"-"not available to search" messages. The columns involved are simple CHAR data types. Anyone have any idea why HTMLDB wouldn't recognize that data type?

    Hello, Vishwanatha.
    You're actually expanding message area (do you see the blue line on your screenshot?)
    But it's overlapped by other views. You can drag the message icon a little bit and you'll see this:
    I had the same issue in IDES system.
    What can be done:
    1. Switch to Default skin from current one (I can guess it's a Signature Design right now).
    2. Or use old-style message area. For this set MESSAGE_AREA_TYPE parameter as INPLACEWINDOW in the parameter profile of your business role.
    Hope this will help you.

Maybe you are looking for