Significant digits not obeyed when value set through property nodes
Hi, I have a front panel with a large number of indicators on it. As updating each one is a very straight forward task, I am using the This.Panel.Controls array to step through and update each indicator appropriatly. The problem is, that because I have so many indicators, and the actual numbers aren't that important (they are also being logged elsewhere) I only wish to have 4 significant digits displayed so that the value fits into the size of the indicator. I set each indicator to have a display format of %_4f, but when I run it this is not obeyed and 7+ digits are displayed. I'm guessing this has something to do with updating the controls via the property node, but I'm not sure why that should cause an issue. Any ideas?
Nope, I double checked the format string. I do mean significant digits by the way. My imput values are expected to be in the range 0-100 but I've sized my indicators to fit only 4 digits, which will give me at worst a 0.1% error over the full range, which is good enough. Right now the channels from which I am grabbing data are all disconnected, so I am just getting noise. I've attached images of both the format string I'm using, the relavent part of my code where I update values, and an example of the output I get. Thanks,
Jon
Attachments:
FormatString.PNG 32 KB
ouput.PNG 2 KB
ValueUpdating.PNG 25 KB
Similar Messages
-
Check boxes not checked when value passed through a request
I've a URL which sets default-check box values -
f?p=121:41:&SESSION.::YES::P41_OWNER,P41_AI_TYPE:&BUGDB_USER.,\5,6,7\
where "\5,6,7\" is the value of check-boxes.
On Page 41, I compute P41_AI_TYPE as follows (as a Process - On Load Before Regions) -
begin
if (:P41_AI_TYPE = '5,6,7') then
*:P41_AI_TYPE := '6:7:5';*
end if;
end;
There are 3 conditional reports that are generated on the page 41 based on these values. i.e. 5,6,7. All the three reports are displayed indicating that the reports do indeed see the P41_AI_TYPE variable.
The "Debug" shows
0.03: ...Session State: Saved Item "P41_AI_TYPE" New Value="6:7:5"
prior to displaying the checkbox
The "Session" also shows -
121 41 P41_AI_TYPE Checkbox 6:7:5 U
However none of the check-boxes are checked.
What could be the issue ?
Edited by: ygore on Aug 26, 2009 10:41 AM0.01:
0.02: S H O W: application="121" page="41" workspace="" request="" session="692841112185158"
0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.02: alter session set nls_language="AMERICAN"
0.02: alter session set nls_territory="AMERICA"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to dbtimezone
0.02: NLS: Language=en-us
0.02: Application 121, Authentication: CUSTOM2, Page Template: 5653628457062181
0.02: ...Session ID 692841112185158 can be used
0.02: ...Application session: 692841112185158, [email protected]
0.03: ...Determine if user "YPGORE" workspace "943324391470666" can develop application "121" in workspace "943324391470666"
0.03: Session: Fetch session header information
0.03: Saving g_arg_names=P41_OWNER and g_arg_values=YGORE
0.03: ...Session State: Saved Item "P41_OWNER" New Value="YGORE"
0.03: Saving g_arg_names=P41_AI_TYPE and g_arg_values=5,6,7
0.03: ...Session State: Saved Item "P41_AI_TYPE" New Value="5,6,7"
0.03: ...Metadata: Fetch page attributes for application 121, page 41
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: Processing point: BEFORE_HEADER
0.04: Show page template header
0.04: Computation point: AFTER_HEADER
0.04: Processing point: AFTER_HEADER
Root Cause Analysis
([email protected]) | Logout
Reports
Edit
Classify
Edit
Administration
Edit
EditEditEdit
Summary Report Area Report Custom Reports
0.05: Region: Action Items Report
Action Items Report
0.05: Computation point: BEFORE_BOX_BODY
0.05: ...Evaluate condition "NEVER" for computation of item: P41_AI_TYPE
0.05: Processing point: BEFORE_BOX_BODY
0.05: ...Process "Compute AI Type": PLSQL (BEFORE_BOX_BODY) begin if (:P41_AI_TYPE = '5,6,7') then :P41_AI_TYPE := '6:7:5'; :P41_AI_TYPE_COMMA := '5,6,7'; end if; end;
*0.05: ...Session State: Saved Item "P41_AI_TYPE" New Value="6:7:5"*
0.05: ...Session State: Saved Item "P41_AI_TYPE_COMMA" New Value="5,6,7"
0.05: Region: Enter Bug User Id
0.06: Item: P41_AREA TEXT
Area : Edit
0.06: Item: P41_OWNER TEXT
AI Owner : Edit
0.06: Item: P41_AI_PERCENT_LOW_MARK TEXT
AI %age comp. range Edit
0.06: Item: P41_AI_PERCENT_HI_MARK TEXT
And Edit
0.06: Item: P41_AI_TYPE CHECKBOX
AI Type :
Test-Generic TestCase Development
Edit
0.06: Item: P41_AI_ID TEXT_WITH_ENTER_SUBMIT
AI Id : Edit
0.06: Item: P41_GO BUTTON
Go
Edit
0.06: Item: P41_AI_TYPE_COMMA HIDDEN
Edit
0.06: Region: Test-Generic Action Items Report
Test-Generic Action Items ReportEdit
0.06: show report
0.07: determine column headings
0.07: activate sort
0.07: parse query as: RMTOOLS_QAINIT
0.07: binding: ":P41_AREA"="P41_AREA" value="%"
0.07: binding: ":P41_OWNER"="P41_OWNER" value="YGORE"
0.07: binding: ":P41_AI_PERCENT_LOW_MARK"="P41_AI_PERCENT_LOW_MARK" value="0"
0.07: binding: ":P41_AI_PERCENT_HI_MARK"="P41_AI_PERCENT_HI_MARK" value="100"
0.07: binding: ":P41_AI_ID"="P41_AI_ID" value="%"
0.08: print column headings
0.08: rows loop: 15 row(s)
No action items in this category.
0.08: Region: TestCase Action Items Report
TestCase Action Items ReportEdit
0.08: show report
0.08: determine column headings
0.08: activate sort
0.09: parse query as: RMTOOLS_QAINIT
0.09: binding: ":P41_AREA"="P41_AREA" value="%"
0.09: binding: ":P41_OWNER"="P41_OWNER" value="YGORE"
0.09: binding: ":P41_AI_PERCENT_LOW_MARK"="P41_AI_PERCENT_LOW_MARK" value="0"
0.09: binding: ":P41_AI_PERCENT_HI_MARK"="P41_AI_PERCENT_HI_MARK" value="100"
0.09: binding: ":P41_AI_ID"="P41_AI_ID" value="%"
0.09: print column headings
0.09: rows loop: 15 row(s)
No action items in this category.
0.09: Region: Development Action Items Report
Development Action Items ReportEdit
0.10: show report
0.10: determine column headings
0.10: activate sort
0.10: parse query as: RMTOOLS_QAINIT
0.10: binding: ":P41_AREA"="P41_AREA" value="%"
0.10: binding: ":P41_OWNER"="P41_OWNER" value="YGORE"
0.10: binding: ":P41_AI_PERCENT_LOW_MARK"="P41_AI_PERCENT_LOW_MARK" value="0"
0.10: binding: ":P41_AI_PERCENT_HI_MARK"="P41_AI_PERCENT_HI_MARK" value="100"
0.10: binding: ":P41_AI_ID"="P41_AI_ID" value="%"
0.11: print column headings
0.11: rows loop: 15 row(s)
No action items in this category.
0.11: Region: Print Region
Print Report
Edit
0.11: Computation point: AFTER_BOX_BODY
0.11: Processing point: AFTER_BOX_BODY
0.11: Computation point: BEFORE_FOOTER
0.11: Processing point: BEFORE_FOOTER
0.11: Show page tempate footer
Home Application 121 Edit Page 41 Create Session Activity No Debug Hide Edit Links Show Edit Links
0.11: Computation point: AFTER_FOOTER
0.11: Processing point: AFTER_FOOTER
0.11: Log Activity:
0.11: End Show: -
CR XI R2 Viewer not obeying printer collation setting?
Just noticed this. Steps to duplicate: Print a printjob to the viewer. Hit print button in Viewer. Change to 2 copies, change collation, print.
Result is the same whether you select a collation of 111 222 333 or 123 123 123. Printout is printed as 11 22 33.
Seems like the viewer is not obeying the collation setting of the print dialogue.
Can this be fixed?Hi Anders,
I found this forum thread - [Collate Copies bugs|Collate Copies bugs; - that discusses this issue. According to one of Ludek's replies he tested printer collating with both CR XI R2 and CR2008 and it worked correctly for him, though that might have been in the designer directly.
Unfortunately CR XI R2 is anything but cutting edge at this point. As noted previously CR XI R2 won't be receiving any further updates. Earlier updates are no longer available, so if you don't have earlier Service Packs there's no way to "go back" to an earlier file version for testing.
Hopefully some else has some additional thoughts.
Sincerely,
Dan Kelleher -
Error -200077 occurred at Property Node DAQmx Timing (arg 3) in DAQmx Timing (Sample Clock).vi:1->PID Control-Single Channel.vi
Requested value is not a supported value for this property.
Property: SampQuant.SampMode
You Have Requested: Hardware Timed Single Point
You Can Select: Finite Samples, Continuous Samples
Author: Pcorcs
Attachments:
PID Control-Single Channel.vi 53 KBActually I have already tried a few things you suggested and got as far as the DAQmx Write vi. The error at the DAQmx was a buffer error indicating i needed to set it to 2 instead of the default of 1. Tried using the DAQmx Input and Output Buffer vi to change buffer, with no luck.
Attachments:
PID Control-Single Channel.vi 53 KB -
Hi,
I am getting this error from visual studio 2012 whenever i try to create the following project types:
- Workflow Custom activity
- Web parts
The error is as mentioned below
"The partial project item type does not have a value for this property"
Due to this the when I add above type of items in my project, they show a red cross icon against them.
Please let me know If have you any solution?Hi
I had same issue. Below is the solution
Installing
"Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
"http://www.microsoft.com/en-in/download/details.aspx?id=39305")
Hansraj Rathva -
As the topic states, I'm pondering if there is a performance hit (or gain?) by making class accessor available through property node?
Specifically, I wonder if the 'class accessor property node' is somehow different than 'normal' property nodes, which I tend to avoid as best I can due to how they often involve the GUI thread and are often detrimental to performance.
And since the follow up question to any answer would be to ask if including error handling terminals changes the answer?
-People who write LVOOP on a semi-regular basis or more, is there a concensus on when/if you use the property node option? Is it preferred as a default almost? Is it affected by whether the accessor is dynamic or static?
Thanks!
QFang
QFang
CLD LabVIEW 7.1 to 2013As far as I know, there is no difference between a subVI call and a property call and they should behave identically behind the scenes. There shouldn't be a forced call in the UI thread, because these don't deal with UI elements. It's simply a different syntax, so it should be the same for DD. I have seen some complaints about performance issues and/or bugs in earlier versions, but I don't remember if there was anything concrete. You can search on LAVA.
Likewise, I don't think the error I/O itself causes delays, but both the serialization of the calls and having case structures acting on those errors can. AQ had some posts on that and he dislikes both. Personally, I tend to like the readability, particularly for serialized calls. Note that some people don't like accessors (at least public ones) as a concept, suggesting that having writers for individual fields leads to all kinds of troubles, and that it's generally better to have specific functions with the relevant inputs.
Try to take over the world! -
ValueChangeListener not firing when iterator set to refresh=never
I have an iterator that I have recently added a child node to. This child node is tied to a view object without a backing entity. The fields in that view can contain user supplied data that I persist through a stored procedure. This mechanism works great accept when the page is refreshed. When that happens the fields in the child node are lost due to the view being reexecuted.
To fix this problem, I thought I could set the iterator to refresh=”never” and then programmatically refresh it when I need to. This solution appears to work but with one small problem, a valueChangeListener in one of the parent iterator fields fails to execute when it is supposed to.
It is very weird. I can remove the refresh=”never” from the iterator and the valueChangeListener functions properly, but if I add it back, it fails to get called. I have compared the html source on the browser and the element is generated the same in both instances, so it is definitely some issue on the server side.
Anyone ever run into a similar problem?
<af:table rows="#{bindings.ItemCountrySystemsVO.rangeSize}"
emptyText="#{bindings.ItemCountrySystemsVO.viewable ? \'No rows yet.\' : \'Access Denied.\'}"
var="row"
value="#{bindings.ItemCountrySystemsVO.treeModel}">
<af:selectBooleanCheckbox id="selectDesc"
value="#{row.CheckBox}"
autoSubmit="true"
immediate="true"
valueChangeListener="#{itemItemCountryDataActionBean.onChangeSystemDescCheckBox}" />
<iterator id="ItemCountrySystemsVOIterator" RangeSize="10"
Binds="ItemCountrySystemsVO" DataControl="RMSItemAMDataControl" Refresh="never"/>
<tree id="ItemCountrySystemsVO" IterBinding="ItemCountrySystemsVOIterator">
<AttrNames>
<Item Value="Item"/>
<Item Value="CountryId"/>
<Item Value="SystemCd"/>
<Item Value="Status"/>
<Item Value="StatusDate"/>
<Item Value="PrimarySupp"/>
<Item Value="CheckBox"/>
</AttrNames>
<nodeDefinition DefName="od.adf.mp.datamodel.views.item.ItemCountrySystemsVO"
id="ItemCountrySystemsVONode">
<AttrNames>
<Item Value="Item"/>
<Item Value="CountryId"/>
<Item Value="SystemCd"/>
<Item Value="Status"/>
<Item Value="StatusDate"/>
<Item Value="PrimarySupp"/>
<Item Value="CheckBox"/>
</AttrNames>
<Accessors>
<Item Value="ItemCountrySystemsLangVO"/>
</Accessors>
</nodeDefinition>
<nodeDefinition DefName="od.adf.mp.datamodel.views.item.ItemCountrySystemsLangVO"
id="ItemCountrySystemsLangVONode">
<AttrNames>
<Item Value="Item"/>
<Item Value="System"/>
<Item Value="Lang"/>
<Item Value="LangDescription"/>
<Item Value="CountryId"/>
<Item Value="ItemDescription"/>
<Item Value="OrigItemDescription"/>
</AttrNames>
</nodeDefinition>
</tree>Using the refresh condition was definitely the better approach and it worked great. Unfortunately not refreshing the parent iterator did not prevent the reexecuting of the child node. I am at a loss on how to prevent this from happening. I am at a loss to explain why the reexecuting of the child view object happens at all when the parent hasn't changed.
Any help is appreciated. -
LOV in Picklist is not reflected with Value Set maintained.
Value set A is contained the latest/updated list of Responsibility Center. Wheres one of the Picklist in Employee Self Service(OTL) which showing the lists of Responsiblity Center which query/calling the values maintained in Value Set A. However, the list of values does not contain the latest information which being maintained in Value Set A. On the other hand, when query from backend table for the Picklist function, the updated value in Value Set A is there.
Additional Infomation: Apache and application was bounced but the result still the same.
Please advice. Thanks.Hi Hussien,
For your information, it is Release 12.1.1, db version is 10.2.0.4 and platform version is Oracle Solaris on SPARC (32-bit).
The article that you have provided does not applicable. This is only happen to the Cost Center LOV in the picklist which does not reflected even there is no end date in Value Set maintained.
Please advice. Thanks.
Regards,
CF -
Cwb error when value set is 'special'
We have setup a DFF segment where the value set has a validation type of 'Special'. When entering transactions in CWB, it gives us an error
'The data that defines the flexfield on this field may be inconsistent. Please inform your system administrator that the value set XX_VALUSET has an incorrect validation type (U). '
I know that there is a restricition in displaying a DFF in OAF if the valueset has a validation type of 'Special'. We are not required to enter value in this segment so is there any workaround for this error not appear?
Thanks in advance.Hi Eddy,
The short text shown in St22 is "Templateinterpretation abgebrochen, Template nicht vorhanden."
Error analysis as shown in St22
"Sie können testweise den Service Parameter ~generateDynpro = 1 setzen,
dann wird für diesen Service die HTML-Seite ohne Template generiert und
Sie können zumindest sehen welches Dynpro vom Web AS gesendet wurde.
Bitte vergessen Sie nicht, den Parameter wieder zurück zu setzen." -
I Can't get music from iTunes it keeps asking for a secruity questions I was not asked for when I set up my itunes
If you log into your account via the 'manage your apple id' button on http://appleid.apple.com and select the Password And Security section of your account are you able to set the questions ? If not then is there a reset link beneath the questions on that screen (the link will only show if you have a rescue email address, which is not the same thing as an alternate email address, on your account) ?
If you can't set them or reset them yourself then you will have to contact Support in your country to get the questions reset.
Contacting Apple about account security : Contact Apple for help with Apple ID account security.
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset, and if you don't already have a rescue email address, you can then add one for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID -
Precalculated value set through broad casting
Hi
If i schedule precalculated value set option in broad casting, if i schedule broad casting. wher can i cross check, its compelted and values are ready?Hi
iam not sure where we can check whether in the tables or in the Process chain itself.
But I have got some info on Broad Casting
Please find the Links below
/people/sap.user72/blog/2005/12/23/summary-of-new-features-for-information-broadcasting-in-sap-netweaver-2004s
/people/community.user/blog/2006/12/28/exception-broadcasting-in-sap-netweaver-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/296edc90-0201-0010-7982-c6dc0b288296
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d91245-1f5d-2a10-c795-8394960f56cc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b485d390-0201-0010-8189-91444c74c69f
Hope this will help you
Many thanks
Kiran -
Is it possible to add text when using flashing button property node?
I am trying to get a text button that displays TEST to show "running"
when it flashes. I am using a property node for flashing.
At present it cycles between TEST and default color which is set in
flashing clolor options.hi there,
use the "Strings[4]" property of the button. right click on the property node and see online doc for more information about the meanings of the 4 elements of strings[4].
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!" -
Need to input a value in a Property Node that doesn't have "Change All to Read" property.
Hi,
I am developing an remote panel application that have 3 vi's.
1 - Login vi => If username and password is OK, then the login vi add the Main vi to access list, and the user can access it.
2 - Main vi => Is the main code
3 - Supervisory Panel => Have a property node (RP.Conn.To.Clients), that searches (with a for loop, number of interations = number of online users), and compares the online users to a condition: if the user is controlling the Main.vi, if yes, I display the user information(IP, Status, Port) on the Supervisory Panel.
My issue is, I need to display also the username(inputed in Login.vi), togheter with IP, Status, Port, that are provided by Rp.Conn.To.Clients.
So i need to know if there's a way to attach the username string with the information provided by RP.Conn.To.Clients, in the same index, because my application will be accessed by many people, and I need to attach several usernames with the information that the property node provides, in the same index.
Any help will be appreciated, im stucked on this for almost a week!Not sure if this is what you meant, but you can change the read/write for each property on a property node individually.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
PIE Graph does not return when values = 0
I use this code to create a PIE Chart
select null LINK
,'E0' LABEL
,(select count(*)
from parts
where om_geometry like 'E0'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
union
select null LINK
,'E1' LABEL
,(select count(*)
from parts
where om_geometry like 'E1'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
union
select null LINK
,'E2' LABEL
,(select count(*)
from parts
where om_geometry like 'E2'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
union
select null LINK
,'E3' LABEL
,(select count(*)
from parts
where om_geometry like 'E3'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
union
select null LINK
,'E4' LABEL
,(select count(*)
from parts
where om_geometry like 'E4'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
It works beautifully, except when each of the values returned equate to zero.
When this is the case the svg chart is not returned. Any ideas?That will come in handy. I have some line graphs to do as well. I am using version 2.2 so i don't think they fixed it. However, i have some good news i have found a work around to my problem. With my set of data i am always going to be bringing back at max 5 values for the data, so i created an item type for each one and set a value in a temporary table. e.g.
declare
l_id number;
begin
delete from graph_temp where name like 'E0' and graph_name like 'P1_GEOM';
select count(*) into l_id
from parts
where om_geometry like 'E0'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid;
if l_id > 0 then
insert into graph_temp (name,value, graph_name) values ('E0',l_id,'P1_GEOM');
end if;
return l_id;
end;
As you can see the table only gets populated when the value is greater than zero. My graph then becomes a simple select from the graph_temp table. The only change i now need to make is to have a session id column in the graph_temp table so i only remove the correct session info each time. -
IRR dynamic action filter does not work when condition set.
Hi All
I've set up a filter on an Interactive report using a dynamic action. The fiilter is used to display records that expire within a term ( example 30,60,90 days.) The dynamic action is set to fire On Change. This all works fine as long as I do not set the report condition to only display when P1_DAYS is not null.
I am using a report template that includes #REGION_STATIC_ID# as referenced in this post -
http://anthonyrayner.blogspot.com/2010/07/report-filtering-with-apex-40-dynamic.html
I hoped not to display a blank report region .. wait until after the user selects the "term" before displaying the results. Any workaround suggestions would be appreciated.
Version -
Application Express 4.0.1.00.03
Thanks
MOKindly check the following link for reference.
sample configuration link
http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01110.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70intf.html
Trouble shooting link
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html
Maybe you are looking for
-
Filter view with session variable does not display value properly.
Hi All, I have a very unique issue and I am not sure if anyone ran into this before. I have a prompt in my dashboard and a link to a report. The session variable default the value to the current value (term) when I click the link to the report I get
-
i have iphone4 from Vodafone carrier when i was in spain, but now i'm in indonesia, i want to unlocking my iphone, where i have to go??? cos it's useless in indonesia... plizzz give me sollution!!!
-
Group Policy servers WARNING Event ID:4098
Hi All, On our Domain controller we get every 5minutes the following error: Event ID: 4098 User: NT AUTHORITY\SYSTEM Source: Group Policy Services Description: The computer 'Application Updater' preference item in the 'Default Domain Policy {31B2F340
-
When i charge my ipod it workd but as soon as i take it out the charger it doesnt work any suggestion on how to make it work?
-
Since downloading the latest scanner driver for the Epson Perfection V700 Photo scanner I cannot use the copy utility to print directly to my Epson stylus Photo R290. I can scan ok to file though.