Signing problems for publishing an update

Hi All,
A friend of mine helped me with creating an application for the iPhone; a simple layer app around my website. This friend is not available anymore to help me.
Today, I want to update this application. I have made some changes to the code which should solve some problems.
Just like a lot of users, I had problems when signing. I tried A LOT. At a certain point I was so desperate that I even followed a "tutorial" which let me delete all my provisioning profiles and some other data in the iPhone Provisioning Portal. It's a mess.
Now I am really desperate. Could you please help me?
This is my situation;
When we created this app, we used my dad's computer, because I did not own a apple yet. Today I do.
There where two certificates in the key chain:
- iPhone Developer: My Name (xxxxx)
- iPhone Distribution: My Name (xxx)
I have copied these two to my new computer (p12 files). So far, so good.
The I have a bunch of *.mobileprovision files and I have a few *.cer files. Also, I have the original zip file which was submitted before.
My question is now, what can I do to sign my application so that accepted as an upgrade? I spent hours reading on forums and manuals, but I am really lost.
Can I still update the application? What are the minimum required files? And what can I recreate? Please help me.
Thanks in advance.

Hi Beginner, and welcome to the Dev Forum!
beginner0013 wrote:
I spent hours reading on forums and manuals, but I am really lost.
The only authoritative, up-to-date instructions are in the Portal. I would recommend reading every word you can find in the Portal before continuing. Read everything at each of the sections listed in the left panel of the Portal Home page. Also check out the Portal Resources in the right panel. Download and read the +Program User Guide+, and take advantage of the 4 video tutorials as needed.
When you find something in the Portal you don't understand, post the exact text of that instruction here, and we'll try to clarify it for you. Follow advice from other sources with great caution, since it may be inaccurate, out-of-date, or both.
Also be aware that all new apps and upgrades submitted to the store must now support iOS 4 and be built with iPhone SDK 4. Everything in the iPhone Dev Center, including the Portal now assumes you're using SDK 4, so you need to install and rebuild your app with the new SDK if you haven't done so already.
There where two certificates in the key chain:
- iPhone Developer: My Name (xxxxx)
- iPhone Distribution: My Name (xxx)
I have copied these two to my new computer (p12 files). So far, so good.
If you did this correctly, you should now be able to test your app on your iPod Touch, iPhone or iPad. Is that the case?
When we created this app, we used my dad's computer, because I did not own a apple yet. Today I do.
If you can't test your app on the device when building on your new Mac, can you still do so on your Dad's computer?
Can I still update the application?
Yes. However, as discussed above, this must now be done with SDK 4.
What are the minimum required files? And what can I recreate?
Everything you need can be recreated by following the instructions in the Portal. If the history of your project has hopelessly complicated things, start from scratch (e.g., with the Certificates link in the left panel of the Portal Home page) as if you were submitting a new app. The app will still be considered an update if: (1) The "App ID" remains the same; (2) The "Bundle Identifier" (based by default on the project name) remains the same; (3) The Bundle Version number is higher than the previous number (e.g. 1.0 -> 1.1).
Please help me.
Any of the experienced developers here will be more than able and willing to help as soon as you have a specific question based on your attempt to follow one of the steps in the Portal. Prior to that it's unlikely anyone will be able to guess how much or how little you understand about the process.
\- Ray

Similar Messages

  • Line-height problem in publishing after update!

    This was how it looked before the update.
    This is how it look now.
    same line-height value. but it only happens when i publish it when i view it locally there's no problem.

    Fisrt, this problem only happens in the published content which has edge runtime js file in minified form.
    There is one issue with the minification due to which this issue happens.
    1. What´s the difference between the code you gave me and the "textShadow" with ts:"textStyle" you gave that other guy?
         Since your edge runtime code is hosted in CDN which we don't have acces to modify, that's why you need to add one line extra code. If edge runtime is hosted in your server itself then you can modify it as I suggested earlier. But I would recommend to add extra one line code, which will be cleaner way to do it.
    2. Should I always insert the code you gave me before starting a new project? So this problem doesn´t happen along the way?
         You can add this one line to every new project if it's using line-height. One we fix the issue in the next release, you no longer need to do that then. But till then, use it.
    -Vivekuma

  • Problem for Restoring after Updating to iOS5

    I saw on the phone, it stated updated completed for iOS5 BUT on the iTunes still updating.. so i pluck out and see but the phone installed back ALL my unwanted apps again and therefore I plug in to iTunes again thinking that i can sync to my previous setting...  the sync process got hang and so I clicked on the restore button and NOW... all my SMS text messages and other bookmarks all gone... managed to sync back contacts...
    Anyonne can help??

    Just throwing in my 2¢, I'm having the same problem. For what it's worth, I noticed previously that even when the iPad said 'Not Charging' (while it was plugged in to my PC, for example) it WAS charging, albeit slowly. This was prior to OS5. Now I'm noticing it in places I wasn't seeing it before the recent OS update, like at virtually all of the charging 'stations' scattered around our house (we're a multi-I device family!)   Before the update, I could plug the iPad in and recharge it from about 20% or slightly less all the way to 100% in about 6 hours overnight. After the update, 5.5 hours took me from 14% to 54%.
    Apple, your "solution" is only a different flavor of problem. You need to do better than this.

  • Problems with publishing after updating to iWeb 1.1.2

    I get the following message after updating to iWeb 1.1.2:
    Can't create the file “shapeimage1_link0.png.” The disk may be damaged, full, or you may not have sufficient access privileges.
    I guess my disk could be damaged, but it seems odd that it worked yesterday before the update and not today (I have the same access priveledges as before). Is there anyway I can get around this problem? I also have the newest Apple updates (10.4.8).
    I get the same message if I try to publish to a folder or try to publish to .mac.
      Mac OS X (10.4.8)  

    I am still having the problem after uninstalling 1.1.2 and resinstalling iWeb and then upgrading to 1.1.1. I followed the directions. I still find it strange that it worked prior to the upgrade but not after. However, reverting to the old version has not fixed the problem.
    Could it be something with OS X 10.4.8? That was also upgraded at the same time.
    I even deleted my blog entry (the only thing that changed since my last time publishing) and that did not fix the problem. Thus, I cannot publish the same web page in 1.1.1 that I could last week. I have run the disk utility and repaired permissions. I am not sure what to try.
    Has anyone used other software in which I could take all the pages I have created and modify them in another program? I don't mind learning a new program, but I don't want to lose everything I have. I figure it will be easier to figure out a new program if I am tweaking already existing html files.
    Adobe GOlive? A macromedia program?

  • Partial redeployment problem for J2EE module update

    hi, all
    I have one application file (.ear) composed of three EJB modules. I tried to paritally redeploy one of them, but it didn't work.
    Here is the command-line for partial redeployment: java weblogic.Deployer -adminurl t3://XX.XX.XX.XX:XXXX -username XXXX -password XXXX -name XA_MOrderEAR -source XAMOrderEAR -targets MOrderBM.jar@SquadA_N1 -redeploy, where XAMOrderEAR is the name of the exploded archive, MOrderBM.jar is the EJB module to be partially redeployed, SquadA_N1 is a cluster.
    Here is the result:
    <2010/2/22 下午02時10分06秒 GMT+08:00> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating redeploy operation for appl
    ication, XA_MOrderEAR [archive: null], to SquadA_N1 .>
    Task 29 initiated: [Deployer:149026]redeploy application XA_MOrderEAR on SquadA_N1.
    Task 29 failed: [Deployer:149026]redeploy application XA_MOrderEAR on SquadA_N1.
    Target state: redeploy failed on Cluster SquadA_N1
    weblogic.application.CannotRedeployException: Module 'MOrderBM.jar' has the same ClassLoader as the Application 'XA_MOrd
    erEAR'. Consider redeploying the entire application.
    Please tell me how to solve the problem. I tried to set enable-bean-class-redeploy to true in weblogic-ejb-jar.xml. It didn't work too.
    thanks
    Blithe Meng

    Hiya
    You can debug this quite easily yourself.
    Enable the SQL Trace for that session and see the Last SQL in the raw trace file.
    You can also run the trace with the option to view bind variables.
    This way you can find out why the SQL is returning no_data_found
    thanks
    anil passi

  • HT1918 My husband's iPhone4 uses one apple id for purchases and updates, but another is listed in the App Store. How do I reconfigure his phone to only use the apple I'd and password that is used in the the "featured" section of the App Store?

    My husband's iphone4 seems to have 2 apple ids. The one listed in the featured section of the App Store is the correct one. The one that asks to be signed into for purchase and updates is also mine, and the incorrect one. Hence, our devices are linked. How can I remove my apple Id from his phone so that there is no connection between the two?

    I think it may be because he got his phone first and not seeing a future issue, I set his phone up to my already existing apple Id used for my iPod. If I connect his iPhone to our pc, can I create his own apple id account?

  • Why does (-50) come up as a problem for me when i try to publish?

    when i try to publish my iMovie to iTunes, it keeps coming up with...
    Unable to prepare project for publishing.
    this project could not be prepared for publishing because an error occured. (-50)
    does anyone know what that means, or what i can do to export it. i have made movies in the past, and they were about 1:30 to 2 minutes long before, and now suddenly it won't let me export it. i have music on it, and the movie is about 4:30 long. it has video and fast forward and slow motion and rewind. but that shouldn't be a problem because movies are not exactly the shortest things. if anyone knows about this or knows how to fix it, could you please tell me because it is so annoying watching that sign come up every time i try to export it. so thank you for your time.
    Millstruck

    It's the Apple ID that app was purchased with.

  • Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

    I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012.  Everything installs without error.  I have acquired a certificate for SCUP signing from the internal Enterprise CA.  I have
    verified the signing certificate has a 1024 bit key.  I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer.  When I attempt to publish a Flash update with Full content I receive the following
    error:
    2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
    I have redone the certificates three times with no luck.  I can import metadata, but any attempt to download content results in the verification error.
    TIA

    Hi Joyce,
    This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048.  Thank you for being my second set of eyes.
    I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
    and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
    2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
    Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect?  In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic." 
    No Flash updates in the ConfigMgr console are marked as downloaded.  I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works. 
    Comments and suggestions welcome.

  • Since last software update, pre-paid internet does not work anymore. Get "you have not signed up for a data plan" message. Pre-paid acct is in order! What's up???

    I have had  an iPad 3G for more than a year now. I did not get it with a SIM card, since I expected to use almost completely at home, where we have wireless internet. Eventually, I decided  it would be handy to be able to take it on the road, and signed up for pre-paid Internet with KPN (national Dutch telecommunications company). That worked fine, until the last big iPad software update. Since then, whenever I try to make a connection outside the house, I get the following message…
    Mobile Data Account
    You have not signed up for a data plan.
    Would you like to set up a new account?
    If you don’t, you can do it later in Settings.
    …with the options of ‘Later’ or ‘Now’ to press. If I press Now, I get a screen “Please wait while the page is loading – this should only take a few seconds to complete.” But it never does, the ball just keeps spinning and spinning and spinning….
    To my mind, with pre-paid internet I should not HAVE to set up a Mobile Data Account in the first place. I’ve checked with KPN, and my account is completely in order. I’ve checked with the local Apple store, and the geniuses say they’ve never seen this. Can anyone help me?

    I updated to 3.6.4 and when I went to NetFlix to watch the next show of a series, it said
    something like
    Installation complete, restart your browser.
    I restarted browser, same problem. Restarted comp. Same problem.
    I updated Adobe Flash 10.1, still same problem.
    But able to watch some vids on other sites, but full screen gave me the big blank white screen with audio only, had to click around in the dark ( so to speak) to find the minimize button.
    I did a System Restore to before the Firefox and Adobe updates.
    I then did not update Firefox as recommended and went to NetFlix and wellah, i can view the movies again.
    And Full Screen is fine.
    I then experimented and updated Firefox only, went to NetFlix and got same msg with no viewable shows.
    So did a System Restore once more.
    Staying at 3.6.3 for a while longer until I know I can watch my movies.
    I don't own a TV, so this is my only form of an occasional escape.
    I do hope this is figured out soon.
    With what I have done, it seems to be Firefox, Not Flash.
    Good Luck to us all.

  • Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

    Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

    Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

  • Hello, I am holding a Iphone 4. I have serious problems for the update of the IOS software 5. in fact this new software will not install. after several attempts, I have error messages 1602, 1604, 2009 ... Suddenly, the screen of my phone is stuck with the

    ****, I am holding a Iphone 4. I have serious problems for the update of the IOS 5 which will not install. atfer several attemps, ihave error messages 1602, 1604, 2009.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • Sign in to (null) to update applications for that account

    I recently had my HDD upgraded on my Macbook, after reinstalling all my apps with Time Machine everything works fine except the App Store, which seems to be not working as it was prior to my reinstalling on my new HDD. My App Store shows there's no updates available, yet when I click on purchases, the app LittleSnapper shows "UPDATE" but when i click on it I keep getting this message "Sign in to (null) to update applications for that account". Also sometimes when I click "purchases" the App Store gives a message that I haven't bought any apps even though I bought about 12 apps since launch. I have only one apple account and I have signed into this account during experiencing this problem. Does anyone having the same problem? and please share if anyone found solution for this problem. Much appreciated.

    Hi and welcome.......
    Install the v10.6.6 Combo Update available here.
    http://support.apple.com/kb/DL1349
    Restart your Mac. If you still see this message, "Sign in to (null) to update applications for that account", launch iTunes. From the iTunes menu bar click iTunes / Preferences then select the Advanced tab.
    Click: *Reset warnings* and *Reset cache* then click OK. From the iTunes menu bar click Store / View My Account then click: Sign Out.
    Launch the Mac App Store. See if that made a difference.
    Carolyn

  • Problem for sign in my Apple mini ipad

    I have problem of sign in for Skype in Apple iPad mini, if i go other device Skype is working properly ,please help me
    Sree

    Asked, answered and marked as "Solved" at: https://discussions.apple.com/message/23456497#23456497#23456497

  • Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

    Hello to the community, I have run into an annoying issue.
    I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
    But everytime I download it, as I click to install, it gives me the message:
    Alert
    This software is not supported on your system.
    But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
    http://support.apple.com/kb/DL1320
    But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
    So I'm completely stuck.
    *Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer.  I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
    I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
    Some help would be greatly appreciated!
    I'm running OS X Mavericks 10.9.2
    mid-2010 Mac Pro
    8 core processor (2 X 2.4gHz)

    According to this article, your EFI firmware is up to date:
    Computer
    Model identifier
    EFI Boot ROM version
    SMC version
    Mac Pro
    Mac Pro (Late 2013)
    MacPro6,1
    MP61.0116.B04 (EFI 2.0)
    2.20f18 (SMC 2.0)
    Mac Pro (Mid 2010)
    MacPro5,1
    MP51.007F.B03 (EFI 1.5)
    Mac Pro (Early 2009)
    MacPro4,1
    MP41.0081.B07 (EFI 1.4)
    Mac Pro (Early 2008)
    MacPro3,1
    MP31.006C.B05 (EFI 1.3)
    Mac Pro (8-core)
    MacPro2,1
    MP21.007F.B06 (EFI 1.2)
    1.15f3 (SMC 1.1)
    Mac Pro (Original)
    MacPro1,1
    MP11.005C.B08 (EFI 1.2)
    1.7f10 (SMC 1.1)
    EFI and SMC firmware updates for Intel-based Macs

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

Maybe you are looking for

  • Why do my bookmarks rearrange themselves every time I start Firefox 3.6?

    I recently installed Windows 7 on this computer and upgraded to Firefox 3.6. I used Fierfox Sync to import my old links, and right away I noticed that the order of my list of links changes every time I open Firefox. Thinking it had something to do wi

  • Right way to jump between pages?

    I am in trouble to find the correct way to jump between pages,I have a page alluser.jsp, in which all usergroups and users are displayed,corresponding to every user's item,I place a link to delete this user,as below: <a href="removeuser.jsp?userName=

  • Why is the screen of my iphone 4 has no light

    Hi There, I have and Iphone 4 and, I was finish a call when the screen become black like it showted down and sence then I can turn it on again and I know wverything is working well bit sence the screen is black I can't see anything! Please help me to

  • I forgot my security questions for iTunes... How can I make purchases on iTunes?

    I created my apple ID account about 5 years ago when I was in high school.  I just bought a new mac and iTunes won't allow me to make purchases without answering security questions.  Is there any way that I can get the answers to the security questio

  • Help needed! Since upgrading to ios 6 I can't access my contact group lists.

    I can still access the screen with the list of the names of my groups, but if I touch one, it deselects it (checkmark disappears) rather than sending me to this list.  This also means I cannot add a contact withing a group list. (When I can, this hel