Simple Connect access other Components

Hi !!
I'm using FMS components, in that I'm not able to connect the
simple connect component with other components which were in other
frame.
Can any one please help in solving this issue.
Thanks in advance
Anil Golla :

Hi anil!
well it was not the problem with the instance name! well i
even i am not quiet sure what is the problem or now can say what
was the problem!
one fine day it started working automatically, with out me
doing any changes!!!
Unusual right?

Similar Messages

  • Connections between decentral adapter engine and other components

    Hi,
    is there any documentation of what connections are needed between decentral adatper engine (DAE) and PI, SLD or other
    components for configuration/monitoring&alerting and at runtime?
    I need this information because our client has a very strict firewall policy and we are not shure
    if we can place an DAE in a given zone of his network. It is very important which protokoll is used and in which
    direction the connection is initiated (from PI/SLD/... to DAE or vice versa).
    Best regards and thank you very much!
    Stefan

    Hi
    Refer these links .
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/327dc490-0201-0010-d49e-e10f3e6cd3d8
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/configuring%20a%20local%20adapter%20engine%20to%20work%20with%20a%20central%20instance%20-%20webinar%20powerpoint.pdf
    Regards,
    Surya

  • Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

    Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

    Download iOS 5.1
    iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
    iPad 1
    iPad 2 Wi-Fi
    iPad 2 GSM (AT&T)
    iPad 2 CDMA (Verizon)
    iPad 2,4
    iPhone 3GS
    iPhone 4 GSM (AT&T)
    iPhone 4 CDMA (Verizon)
    iPhone 4S
    iPod touch 3G
    iPod touch 4G
    iPad 3 Wi-Fi
    iPad 3 GSM
    iPad 3 CDMA
    Apple TV 2 (9B179b1)
    Apple TV 3 (9B179b1)
    Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

  • Access other schema object from connection

    Hi;
    from the dbconnection, how can I access other schema object?
    Thanks

    Hi,
    I don't know if I understand correctly but if you mean the scenario you connect to the database as SCOTT and you want to map table EMPLOYEES from HR schema, you can do it within wizard and in read only view object you
    use schema name as prefix like select * from HR.EMPLOYEES. If you mean something else please describe it more.
    regards,
    Branislav

  • How to access the jpanel and other components on click of a button

    hi ,
    need help,how to access the components of a frame onclick of a button ,if the actionPerformed() is written in a seperate class.
    in my code
    button.addActionListener(new Xyz());
    Xyz is implementing the ActionListener.
    in actionPerformed() i want to access the components in the frame.
    thanks.

    public class Xyz implements ActionListener{
      JFrame frame;
      Component[] comps;
      public Xyz(JFrame f){
        frame = f;
        comps = frame.getContentPane().getComponents();
      public void actionPerformed(ActionEvent e){
        // access elements in comps array
    button.addActionListener(new Xyz(this)); // if 'this' is a JFrame in question

  • How to access time capsulewhen connected to other networks using back to my mac and iclous

    so i need help on using the back to my mac through iCloud to connect to my time capsule so i can access my time capsule when im connected to other networks like at work, firends house, school so i can get my files and use the timemachine

    Is the TC the main router in the network.. if not it doesn't work??
    Did you read the instructions Apple give for connection via BTMM?
    Most important.. you must have full access to icloud from behind whatever firewall your workplace, school etc has otherwise it won't work.
    Finally, don't use TM over BTMM.. it is far too slow and is going to corrupt the backup.. there is a huge amount of checking going back and forth.. the general internet upload speed is not good enough. Just use cloud for backup on the move.. forget try to connect to TM. Or carry a 2.5" drive which are light and portable.

  • Unable to Connect to Other Computers on Network

    We have a small network of 4 Macs and suddenly one of our computers cannot connect to other computers on the network. We have file sharing turned on all the Macs, and the other computers can connect to this G4 733 DA, but the G4 DA can "see" the other computers, but when I try to connect I get the message that the connection failed.
    Is there any solution other than reloading Tiger? In system 9 it was simple to just reload the networking extension if it was damaged, but I am not sure for what to search to fix this problem.
    G4/1GHz, 7600 w/G3/500 MHz , G4/733 MHz Server   Mac OS X (10.4.4)  

    Since all the computers are "seeing" each other, I would try to do a "Repair Permissions" from the Disk Utility on the G4 DA...and, if that doesn't help, try the "Repair Disk" option before reloading Tiger. Sometimes, when OS X can't access system files properly, you see "strange" errors like these.

  • Crystal Reports and Universe Connection (Access DB)

    Hi,
    I am trying to use a universe as a data source for Crystal Reports 2008. The universe is defined on a simple relational Access DB table (.mdb file which resides on the server). After selecting the universe as data source, I can select measures and attributes from it, but after clicking "ok" I am getting the error "Fehler bei Anmeldung." ("Logon failed.").
    Please note that although I am connecting to a relational (not OLAP!) DB, SAP-Note
    " 1363326 - Error: Logon failed on Crystal Report conecting to OLAP Universe."
    describes exactly the error I am facing (except that this note is for OLAP universes).
    The universe works fine if I use it in WebI as data soruce.
    Which universes can Crystal Reports 2008 actually use in general?
    Are there any special restrictions for the data model?
    Thanks for your help!

    Make sure that the Access DB is accessible also from the local workstation the CR Designer is installed on.
    In fact I would recommend to setup your universe connection to you the generic ODBC driver and setup a system DSN for accessing the DB once on your BO server and once on your client. Make sure to use the same DSN name in both cases.
    Regards,
    Stratos

  • Simple Connect Problem

    Hello,
    I have created a chat application using the communication
    components using this tutorial
    http://www.adobe.com/devnet/flashcom/articles/first_comm_app.html
    I have people list component , chat component and the simple
    connect component in the stage.In simple connect I have given the
    localhost path and instance name of other components.
    When I run the application the connection light TURNS GREEN
    indicating the connection has been established. I even have
    server-side script main.asc which loads the component.( load(
    "components.asc" );)
    But, my problem is what to do after that..?
    Because when I press on the login button of simple connect
    nothing happens!
    And also, when I type something on the chat and enter nothing
    is displayed in the chat area.
    What may be the problem?? Any ideas…??

    Hi anil!
    well it was not the problem with the instance name! well i
    even i am not quiet sure what is the problem or now can say what
    was the problem!
    one fine day it started working automatically, with out me
    doing any changes!!!
    Unusual right?

  • Difference between connection pooling and simple connection

    Anybody please tell me what is the Difference between connection pooling and simple connection and also where we define connection pooling and how.
    Thanks
    Please reply soon
    amitindia

    Creating and closing connection to the database is a relatively slow process. Equally connections use database resources so you can't just open as many as you want.
    A connection pool maintains a number of open connections throughout the lifetime of the application. Instead of opening and closing the connections your application just "borrows" them from the pool when they're needed.
    If the pool runs out of connections it will usually create new ones as needed until you reach some predefined upper limit.
    A good connection pool will also manage connections which have failed for any reason, and report code which fails to return connections to the pool (ie connection leaks).
    The number of connections created at startup is referred to as the "low water mark" and the maximum number that the pool will allow to be opened at any given time is the "high water mark". If no connections are available client code will generally block until one is released.
    If by "defined" you mean where can you get a working implementation then your database or application server vendor is likely to provide one. Also the Apache Jakarta Commons includes [url http://jakarta.apache.org/commons/dbcp/]an implementation which you can use with any JDBC driver.
    Dave.

  • I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

    I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • I am able to connect to my wifi network but am not able to connect to other computers on my network

    I am able to connect to my wifi network but am not able to connect to other computers on my network. I have installed windows 7 on parallels desktop, from windows i am able to access my network computers. But from Mac i can only access internet but not network computers Please help

    Ok, well if you're sure that there are shared folders on your PC's, then try this:
    Click somewhere on desktop, so you're in finder > Go > Connect to Server (shortcut to all of this is Command + K) then type in: smb://ipaddresshere
    eg:
    smb://192.168.1.7
    Then either connect as guest, or login with the PC's (not your mac's) username & password.

  • Can't Connect to Other Computers on My Network

    I am unable to connect to other computers on my network. When I go to Finder/GO/Network the next window which should display the servers on the network, opens momentarily and then closes. After that, nothing happens when I repeat the sequence. I am able to get out on the internet but am unable to connect to the other computers on the network, so I think my Linksys Wireless-G Cable Gateway is working. The computer is an intel Mac Pro running OS 10.4.11. My wife is able to connect to other computers on the network with her iMac running OS 10.3.9. Any suggestions for remedying this would be greatly appreciated.

    Hopefully Apple will come to your aid
    • Make sure all the computers on your LAN are on AppleTalk w/ File Sharing: On
    • Check the Firewall settings of all workstations
    • Confirm that your User or Admin account has sufficient Privileges to access sharepoints
    • Reboot all machines to flush their DHCP lease or IP bottleneck
    P.S. there are known issues currently with Leopard File Sharing to-and-from pre-Leopard OS X's. I do not know why your window magically closes itself. Last, run Software Update. Good luck.

  • Cannot Connect to other computers on my router

    I have a u.s.robotics sureconnect 9106 (adsl modem and router - the same as
    9105) and wanted to hang another pc with xp pro to my xp pro machine. So
    i connect the two via ethernet cable to the router, but i am able
    to ping the other machine and to use ftp but neither of the two can see
    the other in windows xp pro
    the same with a osx machine witch i connect for checking itunes or sharefolders
    I also try my xbox with xbmc for sharing and streaming my itunes songs
    but it doesn't work at all, even after i open the two ports asked by
    itunes - i also deactivated outpost but that neither helped - the
    strange thing is that in the outpost/system/lan-settings outpost can't
    even see the other machine
    I can also ping it and ftp, but nothing more
    when i try to connect then outpost ask me if i want to allow it and
    afterwards when i try to close itunes then it says that another user
    is in my library but the xbmc says that it couldn't connect...
    what have i forgotten?
    I not read here that the port 5353 should be udp and i have only give the tcp port free but after changing to udp itunes not even told me on the exit that another user has access to my database
    ah well i have on my router a virtual server with the same ip as my
    computer (192.168.1 ist the modem 2 ist my computer and the virtual
    server and 3 is the other computer) and there i set the port holes for
    the nat service (itunes etc) BUT i think because of that i have
    in the network connections not even a internet-gateway but only
    the ethernet connection
    I installed xp pro new, but then the gateway only appears for some
    seconds and then disappear. But lately for a while it appears but after
    some time it disappears - maybe its because i try this time not to give
    my machine a fix ip and then its possible that the gateway appears when
    I have another ip than the virtual server on my router, and that then
    outpost also recognize the other computer?
    any idea what i did wrong, or i have forgotten, i really haven't a clue
    what to to and i never haven't heard that when you have a virtual
    server (nat) then its not possible not to connect to others
    computers...
    thanks for your patience
    adrian

    Bought my iMac in February and worked fine up until about a month ago. I have assigned a manual IP address outside the range of other devices in my network (e.g. 192.168.0.10) and this seems to do the trick (most of the time). The problem I had was the self assigned IP address wasn't in the usual range for my router so while I was connected to Airport and the internet I couldn't view any webpages. Had to do the same thing to my Macbook which I purchased about a month ago.
    The strange and very frustrating thing is sometimes it doesn't recognise my preferred network but then when it asks me to join a network, my network appears! When I try to connect and confirm password, connection times out. Whats that all about?
    The bottom line is the assigned IP solution doesn't always work but it seems a combination of issues rather than one. None of the other devices on my network (ReadyNas Duo, Xbox 360, PS3, Wii etc) have issue connecting to the router using DHCP but for some reason Airport has trouble dealing with this and assigning a correct IP or can't find the network all together.
    Only thing I can think is its some Airport update that has caused these intermittent issues and realy hope they fix it soon.
    So no update but just wanted to share my experiences in what seems a very wide scale issue...

  • Cannot connect to other pc on network

    Hi.
    I have a laptop and so does my girlfrind. When we are connected to the network, it's not possible to access the other laptop. We can see the other laptop under "my computer", but when clicking at the icon, nothing happens
    We are using a WRVS4400N. How de we connect each others laptop? Are there any setings we should use?
    I also has a wired desktop connected. It's not possible to connect to that one either, even it shows under "my computer"
    Windows Vista is used on all machines.
    'cmnielsen

    Hi.
    I
    have a laptop and so does my girlfrind. When we are connected to the
    network, it's not possible to access the other laptop. We can see the
    other laptop under "my computer", but when clicking at the icon,
    nothing happens
    We are using a WRVS4400N. How de we connect each others laptop? Are there any setings we should use?
    I also has a wired desktop connected. It's not possible to connect to that one either, even it shows under "my computer"
    Windows Vista is used on all machines.
    'cmnielsen
    Hi,
    How are you connecting other laptop are u try to share some folders from other laptop or tranfering some files.
    Hope to Help !!
    Ganesh.H

Maybe you are looking for