HT4587 How do you read the Serial Number on the back of the Airport Express? It is sop small and silver writing on hite background?

How do you read the Serial Number on the back of the Airport Express? It is sop small and silver writing on white background?

http://support.apple.com/kb/ht3546

Similar Messages

  • Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

    Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
    I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

    I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
    I want to simultaniously provide a Wifi connection and a LAN connection at the same time
    Thanks,
    BRad

  • CS6 has two options when installing, try or enter serial number. How do you buy a serial number?

    CS6 has two options when installing, try or enter serial number.
    How do you buy a serial number?
    I would like to keep it going a little longer after the beta expires and convert it to a full retail version.
    thanks

    We are thrilled that you like the CS6 beta and are ready to buy. Unfortunately it has not been released yet. If you would like to be notified when it is available, go to this link and enter your information:
    Pattie
    Sign up to be notified when Photoshop CS6 is available for purchase

  • How do you read the camera position in the 3d picture control?

    Hello,
    There is a method to setup the camera position, but how do you read the current camera position?  e.g. the user uses the mouse, ctrl, and shift, to change the camera position.  How do you read this new camera position?  There don't seem to be any properties to do this.
    I've read this thread:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=214629&requireLogin=False
    but the question was never answered....
    From the comments in that thread, even if you had the proper documentation for the "Model Matrix" property, you couldn't get the information necessary to calculation the camera position.

    Lorielle,
    Thanks for the VI.
    Could you point me towards a more detailed description of the "Modelview Matrix" property?  I've attached a screenshot from the online help.  It is not very helpful.
    Attachments:
    Modelview Matrix.jpg ‏71 KB
    Modelview Matrix1.jpg ‏71 KB

  • HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

    how do you set the airport time capsule as the primary base station rather than as a network client?

    The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
    So, the first logical question here would be......
    What is the make and model number of the device that you call your "modem"?

  • I just synced my iPhone and lost all the info in notes from my phone. It was replaced with whT was on my iMac how do you make the sync go from phone to desktop and not the other way around

    I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that info from desktop to ipad thanks

    It does make sense.  The iPhone is a one-person device and just syncs to one computer.
    The way it should work is as follows:
    Old computer content ---> New computer
    New computer <---> syncs to iPhone
    But the way you are trying to operate sounds like:
    Old computer content ---> iPhone
    ... and ...
    New computer content <---> iPhone
    So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine.

  • How do you remove the SIM card from one iPhone 5 and place it in another?

    how do you remove the SIM card from one iPhone 5 and place it in another?

    With a paper clip?  Refer to the User Guide.

  • How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

    Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

    Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Can't read the airport express configuration

    hi there,
    i've got an AIPORT EXPRESS (b/g) V 6.3, which has been working marvellously for 4 year, with 3 different laptop ( powerbook, macbook pro and PC).
    since last week end, my connection on internet was really slow (with the ethernet cable the connection is really fast as usual).
    So I've reseted it. then reconfigure it. no problem.
    then this saturday my girl friend couldn't see the network on her PC.
    so I've resetted it again!
    since then my macbook pro see it, also my airport utility, but it can't connect to it....
    airport utility says :reading the airport express configuration... and nothing !!!!
    EDIT: also iTunes can't see the AE anymore...
    i just don't know what to do.
    thank you for your solution
    (hope my english not to bad)
    Message was edited by: Relaxxx
    Message was edited by: Relaxxx

    Hello Relaxxx. Welcome to the Apple Discussions!
    Although I know you have tried several resets, please try another "factory default" reset to get the AirPort Express Base Station (AX) back to its original factory configuration so that we can administer it.
    After resetting it, connect your MacBook Pro directly, using an Ethernet cable, to the Ethernet port of the AX, and then, run the AirPort Utility to configure it. Where you able to access it now?
    Once configured, you can disconnect the Ethernet cable. Using the AirPort Status icon in the menu bar, verify that you are connected to the AX's wireless network. Are you now able to both find it and connect from the icon?
    Once you verified that you can access the AX, both via wire and wirelessly from the Mac, try the PC.

  • How can I get the Airport Express to handle all the PPPoE stuff?

    Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
    We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
    What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
    I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
    How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
    Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

    Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
    Direct ethernet cable connection to my Macbook works fine.
    When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
    But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
    thanks
    Paul

  • My 3rd iphone. 3GS I did not buy from an apple store, how do I register this serial number with my apple account? it is already sync to it and will preform every function except email to my home computer. It says apple ID disabled

    My 3rd iphone is a 3GS. I did not buy this one from the apple store, how do I register this serial number with my apple account? it is already sync'd and it and will preform every function except email to my home computer. It says apple ID disabled, also will not update my apps, same promt apple id disabled.
    anyone know where I can go to register this phone? Thanks

    https://register.apple.com

  • How to set up the airport express with a linksys wireless-g broadband router

    I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

    If that is all that is done, the Express would not provide more wireless coverage.  Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area.  As per my above comment, one Express connects via Ethernet to the Linksys.  The second Express provides the extension.
    You must have misunderstood what I was saying.
    Linksys is providing a wireless network.
    The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
    The Express is located on the other side of the house, for example.
    The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
    The Express is configured in Bridge Mode
    This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
    Although this is an "extended" network, it is technically known as a "roaming" network.
    This is what I was suggesting as a possible alternative without having to buy more hardware.

  • Model or serial number ranges for buying a used Airport Express?

    Hi --
    I am interested in buying a few used Airport Expresses. Is there a way to determine which generation or version a given Airport Express belongs to, e.g. by serial number range or model number?
    Thanks,
    Ramon

    Basically there are only two versions of the AirPort Express: 802.11b/g (Model# A1084 / Part# M9470LL/A) & 802.11n (Model# A1264 / Part# MB321LL/A) Note: The Part#s provided are USA-specific.

  • How do I connect the airport express base station to the DSL modem? Can it be done wirelessly?

    Can the airport express base station be wirelessly connected to the DCL modem?

    Alan1111 wrote:
    Can the airport express base station be wirelessly connected to the DCL modem?
    Alan,
         Please provide more information.  (Make/model of the modem and airport express, Mac OS version, etc.)
    Most likely your modem is the source of your internet connect and you sound like you are trying to extend your network through the airport express (which is a router).
    I don't know what a "DCL modem" is.   Perhaps you meant "DSL".
    Most internet modems are either a "Cable Modem" or a "DSL Modem".
    Time Warner (TMC) and Comcast typically provide cable modems, which use a coaxial (round) cable.
    "DSL Modems" are used with AT&T and they are connected to your telephone wires.
    Both of these types of modems usually includes a router built-in, some include a wireless router, too.
    Either way, I don't know of any way to connect an Airport base station to a router wirelessly.
    That would be called a "bridge" in networking terms and while it may be possible, it is not common.
    Most routers use a direct ethernet cable connection, because the data flows much faster than wirelessly.
    Normally, one connects to their airport base station with an ethernet cable from the primary home/office computer.
    It can be accessed wirelessly, but only if you enable that option in the Airport utility (not the default).
    Again, connecting or bridging one router to another router is not a common method.

  • How can you brand a serial number onto the system board?

    I just replaced a system board and need to brand it with the appropriate serial number.  How do I accomplish that?  I have software to run when I do that with Dells or Lenovos.  How can I do it with an HP?

    Hi:
    You cannot tattoo a HP notebook. It has to be done by an authorized HP tech service center where they have a DMI tool for that which is not available to the public.
    You can tattoo some HP business desktops with this software, link below. It might work on HP consumer desktops but I don't know since I have never tried it on one.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...
    This program makes a bootable floppy disk, and cannot be installed via any other method than a FDD or USB FDD.
    It works on many other HP business desktops other than those listed. It has been used successfully in PC's up to a couple years old.
    Paul

Maybe you are looking for