Since I have loaded the iOS 8.1.2 the icons on the desk are continuously flickering. I have reboot the device several time. No change.

Bug iOS 8.1.2: icons are flickering permanently (reboot = no change)

Reboot = what? Restarting and resetting are two different things.
Are you holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple Logo appears on the screen? Don't just power the iPad off and then turn it on again.

Similar Messages

  • While updating my apps, I lost my wi-fi connection.  I have since tried to update the apps several times...but none of them are updating.  Each time I try to update the apps, I enter my password, but then nothing happens.  Thank you - Chris

    While updating my apps, I lost my wi-fi connection.  I have since tried to update the apps several times...but none of them are updating.  Each time I try to update the apps, I enter my password, but then nothing happens.  Thank you - Chris

    Hold the power button and the home button down until the screen goes black and the apple logo appears. This will do a reset and you should be able to update your apps then.

  • Itunes is not responding on my pc so I cannot sync my iphone 4.  I  have rebooted teh pc several times

    When I plug my iphone in, iTunes launches as it always has  - the screen offering to update my phone comes and then everything freezes, I cannot tell it to update or to sync..  I do not  want to update without syncing because it has been several days since I have been able to  sync and I do not want to lose my data on my phone.  Any ideas?

    You must mean backup because syncing adds content from your iTunes to your device. Judging from your post, you must not have iCloud activated on your phone in order to backup via WiFi.
    As for the update, if iTunes freezes after you inform the program that you would not like to update, then you might have to forsake the backup, which is only a few days old, and place the device into Recovery Mode as described in http://support.apple.com/kb/ht1808.

  • Why are there problems getting notification alerts and sounds in ipadv3.  My settings are set exactly like my iPad 1 and all alerts and sounds appear but not on new iPad.  Very frustrating.  I have rebooted and reset several times.  Hate to have to make A

    Apple Support Communities
    Welcome, Uwdawgfan(Sign out)
    NewYour StuffHistoryBrowse
    Search for:  Search
    Apple Support Communities > People
    Profile
    Your Stuff
    Notifications
    Uwdawgfan
    Level 1 (0 points)
    [email protected]
    Member Since:May 26, 2012Last Logged In:Jun 26, 2012 6:10 PM
    My Products
    iPad, iOS 5.1.1, Epson stylus NX 430     Delete
    Add a product
    Recent Activity
    Uwdawgfan asked
    Notification settings on iPad 3 are set properly but my new IPad does not get alert badges or rounds on apps with all notifications selected and in notifications center.  Why?  Others are reporting same problem.
    "i just bought the new iPad and even though notifications are set exactly the same for mail and my app is turned on and in the Notifications"
    in Using iPad • 0 bookmarks
    Less than a minute ago
    Actions
    Change photo & avatar
    Edit profile & privacy
    Edit preferences
    Manage email notifications

    Do you have system sounds muted?  Check the button above your volume control on the right hand side of the iPad.  If, when you change the button you see mute on your screen, you'll restore system sounds.  If you see lock orientation, you can restore system sounds by double tapping your home button to bring up the task bar (most recently used apps).  With your finger swipe those apps all the way to the right to reveal a mute icon on the left.  Touch that icon and you'll restore system sounds. 
    Let us know if that was the issue.

  • HT1766 I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be comp

    I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be compctable with new soft ware. I do bnot agree with their finding because i have I phone with ISO 7 updated soft ware and same files run on my I phone but not on I Pad. This was working fine before updating new software. This device is useless for me if i can not watch the program that i bought this for. I want device to replaced or taken back by the company. Thank you

    Here are the iPad Mini specifications:
    iPad mini - Technical SpecificationsNov 1, 2012
    The specifications explain exactly what types of files are supported under "TV and Video".

  • Ever since we down loaded the new IOS , my I Pad 3 has been crashing, shutting down by itself. Can u tell what's going on?

    Ever since we down loaded the new iOS , my I pad has been crashing, shutting down & freezing ? Can u tell me what's going on.

    You may want to try this:
    1. Backup iPad
    2. Setup iPad as new. Settings>General>Reset>Erase all content and settings
    3. Test iPad thoroughly
    4. If everything is fine, restore backup to iPad

  • HT6114 Since I have updated to Maverick, every time I download anything, it automatically saves the file on my desktop.  I do not want it saved on the desktop

    Since I have updated to Maverick, every time I download anything, it automatically saves the file on my desktop.  I do not want it saved on the desktop.

    Download how?  If you are downloading via Safari, see Safari Preferences, General.

  • IPhone 3GS iOS 6.1.3 -  camera doesn't work. Shutter won't open & camera button becomes disabled. Pls advise what to do? I have already tried resetting the phone several times.

    iPhone 3GS iOS 6.1.3 -  camera doesn't work. Shutter won't open & camera button becomes disabled. Pls advise what to do? I have already tried resetting the phone several times.

    Hello Kunmon,
    The following article provides some useful troubleshooting that can help get your iPhone's camera working correctly.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • My computer will not load the device drive for my ipone 5. I have uninstalled, reinstalled itunes

    my computer will not load the device driver for my ipone 5. I have uninstalled, reinstalled itunes; i have restarted phone; disabled startup devices for windows 7; restarted my computer; Please help- very frustrated

    Device not recognized
    http://support.apple.com/kb/TS1538
    Note: You should only sync to one computer

  • HT201412 After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several time, but the problem still exists

    After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several times, but the problem still exists

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Contact the developer/go to there support site
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • System Error 998 While loading the Labview Run-Time Engine

    Hello.
    I have a DLL made with LV 7.1 I run the dll using a C compiler and works great in WINXP, but cannot run in Win2K. Error is:
    "System error 998 while loading the Labview Run-Time Engin(c:\program
    files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
    READVOLTAGE requires a version 7.1 (or compatible) Labview Runtime
    Engine. Please contact the vendor of READVOLTAGE to correct this
    problem"
    READVOLTAGE is my function inside the dll. The runtime is already
    installed. I tried it in another WINXP running machine and works fine.

    This is actually a Microsoft bug with statically loaded DLLs. There are a couple of workarounds for it, and I have included two links below to posts that address this issue:
    Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC
    I get error 998 when calling a LabVIEW buildt DLL from MSVC++
    Kind Regards,
    E. Sulzer
    Applications Engineer
    National Instruments

  • Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

    I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
    - Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
      this, after normal behavior for more than a year since purchase of the iPod.
    - Different podcasts have been affected at different times, after changes in the state of the iPod.
    - Only podcasts are affected.
    - This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
    - The only change to iTunes, the Mac, or the iPod is that just before this condition began
      I’d begun syncing an iPhone via iTunes.
    I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
    I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
    So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
    By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
    As I said,  this involves only podcasts. All other content on the iPod does appear in iTunes.

    I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
    Need Help!!!

  • My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • System error 988 whlie loading the LabView eun-time engine (C:\Program file\....\\lvrt.dll)

    I am trying to use NI devices with Lazarus (there is no pascal section, so I post here).
    When I try to run my application:
    DAQmxBaseCreateTask('TaskHandle', TaskHandle);
    DAQmxBaseCreateAIVoltageChan(taskHandle,'Dev1/ai0','',DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,'');
    I get the following error message:
    „System error 988 while loading the LabView eun-time engine (C:\Program file\....\\lvrt.dll)
    nidaqmxbaselv requires a version 2010 (or compatible) LabView run-time engine. Please contact the vendor of nidaqmxbaselv to correct this problem.“
    I installed LabView run-time engine 2012, but I still get the same error.
    Then I tried to install LabView run-time engine 2010- the same result.
    I removed LabView run-time engine 2012- same result.
    I tried to install LabView run-time engine 2010 again (since I did not see it in the add/remove list)- then I noticed, that the installer shows „A newer version is already installed".
    What shall I do?

    Hi,
       Can I ask the same question too?
       I am using
       Windows 7 sp1 x64
       Visual Studio 2010 pro 
       NI USB-6009  
       ni-daqmx base 3.4.5 
       I created a empty win-32 console project and putted the ANSI C Example program: acquireNScans.c with the include file and lib file of nidaqmxbase in the same folder. I added this line on the top of the source code #pragma comment(lib,"nidaqmxbase.lib"), built without any error. When I tried to run it, I got this same message.
      I tried changing to shared dll mfc and delaying linking lvrt.dll, but did not work.
      Looking forward to your reply.
    all the best.

  • Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

    I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver  I have the message that it is already up to date.
    I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

    Hi juigarashi,
    Microsofts automated troubleshooting service on the link below may help
    CD/DVD Repair
    Hope it works for you.
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for