Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the "determining apps to sync" stage of the process. If I am attempting to download app updates before attempting to
Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the “determining apps to sync” stage of the process. If I am attempting to download app updates before attempting to sync, the problem normally occurs at the first “installing app x” stage. In addition, the whole iTunes experience is extremely sluggish and will even freeze while searching for a track. Everything worked fine on Windows 7. So far, I have repaired the program several times and have checked for compatibility issues, but there is no Windows 8 option in the combo box, obtained after right-clicking the icon and selecting Properties/Compatibility. As a result, I am unable to sync my devices. If I uninstall iTunes before re-installing, will this affect my iTunes libraries? Does anyone have any suggestions?
After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.
Similar Messages
-
I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices. I assume that I have to reconfigure them to the the new wireless but how do I do this frmo my PC? Thanks
I would recommend that you start by performing a "factory default" reset on each of your AirPort Express base stations. Once completed, you can use the following Apple Support article to configure each base station for streaming.
-
Just attempted to download current update of Itunes into my HP computer with Windows 7. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99714) -
Upgrade + migration from nw04 on windows 2000 to nw04s on windows 2008
Dear all,
I need to upgrade and migrate my nw04 java system from windows 2000 to nw04s on windows 2008.
From the PAM I can see that NW04 is not supported on windows 2008 and that nw04s (7.0) is not supported on windows 2000.
So, which is the correct upgrade path? Do I need an intermediate win 2003 server which is supported from both the releases?
Thanks and regards in advance
FedericoHello my friend
This will be a very interesting project for sure. As you know, kernel 640 is not supported on win2008 and 700 is not supported on win2000, so here there must be a win2003 as a transition platform for this upgrade+ migration, not to mention migration from 32bit to x64 is also involved. You didn't mention the DB versions in source and target systems, as well as the SAP product you're trying to go with. Here's a brief checklist right now for what I can think of, once you're back with more details then let's make it intact:
I assume your source OS/DB is win2000SQL2000 32bit, target one is win2008SQL2008 x64.
1. Install a win2003 x64 server and SQL2000 32bit;
2. Install a new SAP instance same as your source system release in 32bit compatible mode;
note: if the system being migrated is BW, then be aware of that you might want to bring new features in SQL2008 of row compression and table partitions.
3. Detach the source DB from old SQL2000, and attach it to new SQL2000; some post configuration for DB copy will be required (STM tool). Now you've finish a migration from win2000 to win2003 32bit;
4. Start upgrading NW04 to 7.0, 640 to 700, find details in upgrade guide; Now you have your 700 instance on win2003 x64+SQL2000 32bit;
note: since release 701(700 EHP1) is available now, which you might want to upgrade instead of 700.
5. Change the collation 850BIN2 for SQL2000 32bit, detach DB;
6. Since migration from 32bit to x64 cannot be done smoothly, now you have to uninstall everything and reinstall win2003 and SQL2008 x64, followed by a new 700 or 701 instance;
7. Attach the source DB, post configuration for DB copy will be required (STM tool); Now you have your 700 or 701 instance on win2003 x64+SQL2008 x64;
8. Detach the SQL2008 DB;
9. Now go to your target win2008 OS, install SQL 2008 x64 and new 700 or 701 instance;
note: there might be some restrictions for NW 7.0 on win2008, go with the latest release (SR3 or newer).
10. Attach DB to this final OS/DB version: win2008 x64+SQL2008 x64, post configuration for DB copy will be required (STM tool).
Helpful?
Regards,
Effan -
Migration from PE 8 (Windows) to PE 11 - What steps?? (MAC)
I am planning to migrate from PE 8 (Windows) to PE 11 (Mac). I will continue to use the PE catalog in PE 11 to organize my library of 16,000+ photos. Although I had considered moving to Aperture for my Digital Asset Manager (in order to more seamlessly work in an Apple environment), I have instead decided to stay with PE since I am familiar with it and happy with its functionality.
I am hoping that this forum can help me: I need to know what steps to follow to perform this migration. (I am a non-technical user. All I know thus far is that I need buy a boxed version or PE11 - NOT download it from the Apple app site - in order to get the cataloging function.) I would like the process to enable me to port both my photos AND my hierarchical keyword tagging structure.
(Some background on why I am asking this question proactively: I was severely burned in a previous upgrade from PE 5 to PE 8 (Windows XP to Windows 7) where ALL of my tagging got lost in the move. This, despite hours of work with the Adobe support team who had me write the keywords into metadata and re-backup, re-port, etc, etc. It was a nightmare of many hours spent. All unsuccessful. I ended up manually re-tagging each of my photos. Needless to say, I do not want to go through that again,)
Thanks in advance for your help. AmyElements Downloader doesn't auto run on a mac. It's set up so that you always have to launch it from organizer.
If you know you won't use iphoto, then it's a good idea to go to the iphoto preferences>General>When a camera is connected, and choose No Application, in which case the card will mount like a drive on your desktop and you can drag the photos from it or launch PSE Downloader, or choose Image Capture, in which case apple's own OS X downloader/scanner utility launches and you can use that, then File>Get Photos>From Files and Folders to bring them into Organizer.
For moving the catalog, the most important thing is to be sure the catalog is okay in windows first, so do go to manage catalogs>repair, and then optimize before backing up. The transfer is very easy when it works. -
Hi all,
We are considering in a SAP R/3 4.6c to ECC6 Upgrade, the option to migrate from AIX to Windows OS.
We heard that this option is not so usual.
- Could you tell us some feedback and recommendation about it?
- What kind of issues will we face?
Thanks for your help,
Chris> We are considering in a SAP R/3 4.6c to ECC6 Upgrade, the option to migrate from AIX to Windows OS.
>
> We heard that this option is not so usual.
Usual? What is "usual"?
> - Could you tell us some feedback and recommendation about it?
> - What kind of issues will we face?
This depends heavily (if not only) on your environment. Some thoughts:
- Windows is little endian whereas AIX is big endian; this may affect connected software (non-SAP software, filesystem transfers etc.)
- additional software plus licenses may become necessary (cluster, backup...)
- do you have enough knowledge about Windows (+ its internals) as you have on AIX? Windows is not "easier" by default just because you have a mouse to click... (even if everyone thinks it is). Windows administration is totally different to any *nix (you may need to change scripts, consider updating regularly, think about problems you didn't have before (Virus, Worms) etc.)
- Hardware for Windows is usually cheaper than Power based hardware for AIX
- Windows licenses (+ CALs) must be bought
Just as another thought: Did you consider running Linux instead? You will use the same (cheaper) hardware with a more common environment (if you come from AIX)?
Markus -
I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error: Quicken could not connect to the server. Please try again later. [OL-290] I understand this is because of a mismatch between SSL certificates at the financial institutions and Apple's SSL certificate included with OS 10.10 Yosemite. Any fixes to this issue?
I have the same problem but Q for Mac 2015 does not meet my needs. Is there a fix for this problem?
-
When I attempt to download apps, a message pops up saying that I cannot download from the UK store but must do so from the Batbadian store. I am in Barbados and thought that my downloads would be from the US. Cannot find anything in settings to resolve this issue. Any help? Thanks.
Change your country on iPhone, iPad, or iPod touch
Tap iTunes Store, App Store, or iBooks Store.
At the bottom of the Featured page, tap Sign In.
If you're already signed in, skip to step 5.
Tap Use Existing Apple ID.
Enter your Apple ID and password and tap OK.
Tap your Apple ID.
Tap View Apple ID or View Account.
Tap Country/Region.
Tap Change Country or Region.
Tap the Store menu and tap your country.
Tap Next.
Review the Terms and Conditions and Apple Privacy Policy.
Tap Agree if you agree to the terms and conditions.
In the prompt that appears, tap Agree.
Select a payment method and enter your payment information.
Enter your billing address and tap Next. -
Hi, im currently using an windows 8 computer and have installed itunes 11.5. My problem is i'm trying to transfer one song from my computer to my iphone. But some how i cannot drag and drop like last time itunes 10.x. I do not wish to sync as it means of deleting my entire song list from my phone just to transfer 1.
" I ordered the Snow Leopard software and tried installing it, but it stopped and said to clean the disk."
First off, your installation disc is in all likelihood faulty.
This has been a known issue in the past:
Faulty Snow Leopard install discs - Apple has no timeline on ...
http://store.apple.com/us/help/returns_refund#policy:
*You can return software, provided that it has not been installed on any computer. Software that contains a printed software license may not be returned if the seal or sticker on the software media packaging is broken. -
I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?
i had the same problem before using a fresh install of Windows 8.1. I have resolved this issue by running the program compatibility wizard. This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter. When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
After that, it tired to resolve the issue, and provided the necessary settings to run iTunes. Now it's running flawlessly. I have Avast anti-virus installed though.
HTH! -
Got new computer with windows 8.1 and installed latest itunes, went to update music library on my nano 5th gen and plugged in recognized in my library but when it synced , it said sync was complete but did not update at all, then reset the ipod to factory , BIG MISTAKE plugged in again and it did the same thing except now I have no music on at all it syncs but will not put any music on , previous computer had xp on it, what would the problem be and what would solution be????
Thanksc) unistalled and reinstalled iTunes
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
I have attempted to update a few apps and the install has frozen on 'waiting' not allowing me to either access the app or delete it, any idea why this has happened and how do I get around it?
See if either of these things works for you. In the future ... Only update one app at a time. Forget that the Update All button even exists. It causes more problems than it does good - IMO.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream. -
I update my iTunes in my PC running window 7 today and immediately afterthat iTunes programme hauled. What shall I do??? Can somebody help me??
Hey yeow28,
Thanks for the question. I understand that you are experiencing issues after updating iTunes for Windows. The following article may provide a solution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the install fails reporting "insufficient memory".
I assume the installation requires more memory than the OS actually needs to be able to run.
I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
You need much more RAM than that.
Leopard system requirements:
http://support.apple.com/kb/SP517 -
I am using Iphone 5. SInce the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal or the other way is to turn the device off and then turn it on. the phones also running slow and therefore at times becomes very cumbersome. a few of my friends have also been having the same problems.
I have taken the phone to the service outles but the best they did was to reboot the phone it works fine for a day or two but again the same issue.
Can anyone share any info on it?I'm glad to hear that they replaced your phone. Any experience I have had with Apple customer service and/or Genius bar has been extremely positive. While I have had positive outcomes from trouble with other phones in the past, they are not as quick and friendly. I had a Motorola phone and a Samsung phone go bad several years ago and warranty work through AT&T required that I wait for a replacement unit and then mail back the original unit to keep from being charged for the device. This usually meant almost a week without a phone. Nice to walk into Apple and walk out with a replacement device. Enjoy your phone.
Maybe you are looking for
-
on a non wired desktop pc, windows xp. sp2, I want to clean out the system tray of unneeded icon(programs)running there. I have: Linksys Router BEFW1154 adapter WUSB11Ver2.6 cable modem BEFCMU10 v.3 In the non wired computers system tray there are 2
-
I am wondering if this can be done.. To create a PDF with small images on it, when a user clicks on the image a larger image appears. I don't want it to be a hyperlink going to a new page, just for a larger image such as an overlay will appear. Is
-
Database View ---- Execution Time
Dear experts, I hv to improve the performance of a report in which a view has been used. I hv debugged the program, when control goes to query that is fetching data from view, taking very long time. Can anything be done to improve the performance of
-
Hi Is there any way to modify the number of PR0X processes? There are currently 5 such processes running, is there a way to configure this value? I am currently using Oracle 11.2.2 with Active Data guard on HP UX system. Thanks
-
MIRO (About Subcontract PO return)
Hi, I've got a problem about subcontract PO return, the scenario is as follows... We received 100PCS products for a subcontract PO in May, and till someday next month, we returned 10 PCS with MT122. (Although we provided material and the supplier jus