Since my school upgraded the Windows server and various bits of software with it, our department has been unable to contact MobileMe, publish iWeb, or contact various other IP's. This seems like a firewall. We have Xserve to Windows server to internet.

Our technicians can't resolove this problem, and our iWeb sites are teacing sites - causing us huge problems because we cannot publish conventionally.
The routeing is laptop/wireless/Xserve/Apache/internet.
Any advice gratefully received.
Hugh Morrson

If anyone is following this and not become bored, and if anyone else has the same problem -
What I have done is as follows: 1. Signed out of my account. 2. Deleted the cache.db from iWeb Cache (don't delete the folder) 3. Deleted the iWeb.plist 4. Cleared the trash and rebooted the machine 5. Signed into the account. 6. Booted the Domain.sites2 file.
Twice this worked and I made a connection and published. But once I closed iWeb, it refused connection again, and got into a loop as follows - boot Domain.sites2, go to Publish site changes, and it asks me to log in. Once logged in, it (iWeb) continues to ask to be logged in.
Next I removed the current Domain.sites2 files, cleared the trash, and reset as above. Then I booted iWeb and it came up with a clean start. Now it would publish without a problem.
I took the old domain to another machine on the same network and tried it, but it had the same problems as before.
I have brought the old domain home and it has published from my machine here without any problem at all. It just did it.
I think that I have shown that the fault is not in iWeb (tried different machines), not in cache or preferences (constantly cleared them out), not in the domain (works perfectly elsewhere).
Our technicians have suggested that it is that the new network system is incompatible with 10.5, and will work with 10.6 as they have tried it on one of their machines and it works. I have tried it on 10.6 on the same network and it doesn't work, so that is nonsense.
You may be able to sense some despair that we have technicians who blame operating systems and who are quite certain that Mac can't network properly. I used to have to work hard to get OS9 to network, but it did.
Any further support or answers gratefully received.
Hugh M

Similar Messages

Hi. I have downloaded iOS7.1.2 but for installation, it requires power suply. I connected to power suply, but before completion of update installation, I switched off the power plug, and go out of wifi area. Now it has been stoped. My Iphone4 is hang

Hi. I have downloaded iOS7.1.2 but for installation, it requires power suply. I connected to power suply, but before completion of update installation, I switched off the power plug, and go out of wifi area. Now it has been stoped. My Iphone4 is hanged. Help me

Plug it into your computer and restore it using iTunes.

I called the apple support and did reset my password still my apple if has been disabled on my phone.

Help me I have called the apple support and they told me to reset my password which I did and when I go to my iPhone i try to update some of my apps and it says my apple id has been disabled.

See your other post...
https://discussions.apple.com/message/19943002#19943002

I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture. I cannot get it to project my school work that I need to teach my students.

I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture. I cannot get it to project my school work that I need to teach my students. Help!

Hi Becki514,
Welcome to the Support Communities!
The following articles may help you with your projector issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
I hope this information helps ....
Have a great day!
- Judy

I'm on Mac OS lion and since your new upgrade, the page loads of center, with no scroll bar. On every computer I run I have to resize the page for the page to load correctly. How can I fix this?

I'm on Mac OS lion and since your new upgrade, the page loads off center, with no scroll bar, this happens on every computer I run.
In order to have the page load correctly, have to manually resize the page.
How can I fix this?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.

Upgrade the IPCC xpress and IP IVR to 7.0.1.

HI,
We are upgrading Our existing IPT & IPCC clusters.
Last weekend we have upgarde the CUCM from 5.1 to 7.1.6 sucessfully.
This weekend we are planning to upgrade the IPCC xpress and IP IVR to 7.0.1.
I would like to know Upgrade path, strategy, Planning and also the recomended Software report for the upgrade.
Do let me know if you require any more information as we are planning the upgarde this weekend.
Thanks & Regards,
JF

Your post does not mention what version of CCX you are on currently: 4.5(x) or 5.0(x). That makes a big difference.
I'm going to hope you're on 5.0(x) since you'll already be on Windows 2003 then and won't have to reformat the server. After performing a backup of your old version, confirming you have a copy of all your LIC files and the PAK from your PUT order, the installation guide will walk you through the actual upgrade process; it has chapters specifically for upgrading from each version.
Also, be aware that none of the CCX versions that were supported with UCM 5.x are supported with UCM 7.x. You are in an unsupported state and I frankly expect that you will have JTAPI-related call problems until you upgrade. You may want to consider hastening your plan to upgrade CCX.

HT1203 I moved my Itunes media folder to my public folder in my home folder so that my wife can share my music when she logs on to my computer. Since then aperture has been unable to locate the music files and I cannot add any of my itunes files to a slid

I moved my itunes media folder to my public folder in my home folder so that my wife can share my music when she logs on as a user. Since doing this Aperture cannot locate any itunes music files and so I cannot add any music to a slideshow. All of my existing slideshows no longer play music. Can anyone help?
Thanks

Thank you for your prompt response - I did as you said and did a drag and drop into the iTunes window - it imported and got my album art from the net. When I started Itunes with the shift key down I was prompted to choose a library but since I copied over the media folder and not the library folder I was unable to select that so I guess I will have to create a new library and add in all the music, videos, etc. unless I wait for my laptop and export the library or at least that seems to be the case? In short, all my data (iTunes media folder) is on my external drive and can be added to the blank iTunes screen but I can not choose a library folder. Is there anyway around completely making all those playlists again? I am not sure my laptop will survive the shop with data intact and really hate to start over on those.
In an unrelated question - I collect old TV shows from the 1950's. Can I make playlists within the home video folder somehow? In other words like one for Quiz shows, one for comedies, one for police and detective shows, etc. while I am remaking all my playlists for my music if I end up having to go that route?
Once again thank you for helping me out. I am not too Itunes savvy and really appreciate you taking the time to answer.

I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

HT1688 Since I've upgraded the IOS to 7.0.2 on my iPhone 5, my phone will randomly restart itself. Is there a fix for this?

Since I've upgraded the IOS to 7.0.2 on my iPhone 5, my phone will randomly restart itself. Is there a fix for this?

Howdy there Tuna241,
Thank you for using Apple Support Communities.
It sounds like your iPhone is restarting unexpectedly after the update to iOS 7.0.2.
I recommend the steps outlined in the article named:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Sterling

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

I updated the software on my 2009 MBP to Mountain Lion. Since then, my iPhoto has been unable to open my photo library. I have updated iPhoto, and still no luck. Any ideas for fixing this problem?

I updated the software on my 2009 MBP to Mountain Lion. Since then, my iPhoto has been unable to open my photo library. I have updated iPhoto, and still no luck. Any ideas for fixing this problem?

Welcome to the Apple Support Communities
Do you see any message when you open iPhoto? Try to open iPhoto holding Option key and select the library

After upgrading my 3gs to ios5, I get 2 copies of pictures synced from my computer, 1 in the Photo Library and another in a library with the same name as the folder I put the pictures in to put on the phone. Any ideas why?

When syncing pictures from my computer to my I-Phone I get 2 copies of the pictures, 1 in the Photo Library and another in a library with the same name as the folder I put pictures in to put on the phone. This started after I upgraded to ios5. I have tried re-installing I-Tunes. I have not reset the phone. My main concern is the amount of memory pictures take up on the phone. It's not a problem now but could be in the future. Any Ideas on why this happening?

It has always been this way. it was never different. This is how the iphone handles photos - always has.
There are NOT two copies, There are simply two ways to access the very same photos. All synced photos will ALWAYS be under Photo Library ( you can look at all photos at once this way or do a slideshow of all photos). Those very same photos can also be accessed from the individual folders so you can show or slideshow just that folder.
Just as a book can be in the library and in the fiction section, there is only one book/photo.

Since my school upgraded the Windows server and various bits of software with it, our department has been unable to contact MobileMe, publish iWeb, or contact various other IP's. This seems like a firewall. We have Xserve to Windows server to internet.

Similar Messages

Maybe you are looking for