Since Upgrading to Ios5 i cannot open my contacts! i have tried to disable the Icloud and still they do not open! anyone have any further ideas for me to try?

Since i updated my Iphone 4S to IoS5 i cannot open my contacts! i have tried to disable the Icloud and still they do not open! anyone have any further ideas for me to try?

Check the age of the files you wish to open.
Keynote 6 (the latest you downloaded) will opne Keynote 5 (KN09) files but nothing earlier. For that KN5 will act as an intermediate format (you save KN4 and earlier as KN5), then KN6 can open the resultanr files.
Make sure you have a backup of your original files, in case KN6 cannot replicate some of your earlier builds and transitions.
Les

Similar Messages

Since upgrading to OSX Yosemite cannot open word files downloaded from email.

I have recently installed OSX Yosemite on my late 2010 macbook air. Since upgrading I have been unable to open files in Word that I have downloaded from my email. Old word files seem to work fine. My university has given faculty access to "Office 365" and that is what I use for my email. However whenever I try and download a word file from my email the computer opens word for a second - I can see the first page of the document - and then immediately closes. This happens regardless of whether or not I open the file from my computer in my desktop or in my downloads folder, or just download another copy from my email. The word file works fine on another windows computer, it's only on this mac that Office 2011 crashes every time I try and open this new file. Please advise?

A web site for the community I live in. I can get into the site but when I try to open a PDF file all I get is a grey screen. I can open PDF files from mail, and other sites.

When receiving an appointment from Microsoft outlook And since upgrading to ios7 I cannot open the appointment and Add it into the iphone calendar?

Since upgrading to ios7 I can no longer accept email appointments from outlook, open them and then add the appointment into my iphone calendar!

Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

Since upgrading to Yosemite, I can no longer print to my Kodak AiO. The fix on Kodak site does not work.

Since upgrading my Macbook to Yosemite 10, I can no longer print to my Kodak AiO 5250. The fix on Kodak site with Terminal does not prompt to password like it says it will. Macbook has all available upgrades completed. Printer works with a PC.

This is where I found the Kodak fix: http://support.en.kodak.com/app/answers/detail/a_id/49247/selected/true
I'm not really comfortable in 'Terminal' but tried it. Nothing happened after pasting in the first command. The fix says it will ask for password.
I see now this seems to be a pretty common problem, I would have thought Apple would fix it with an update for the number of complaints I've found. Since Kodak is in receivership or bankruptcy, I would think it's unlikely they will have any more solutions. I feel like Yosemite stole my printer.

I just upgraded to FIrefox 8 and after that pops are no longer popping up. I need this to work. I tried to disable popup blocker and still nothing works.

I just upgraded to the new firefox 8 and after installing my popups are no longer working. It use to work with version 6. I cant do my work because of this. Now i will need to downgrade again to version 6.

I had the same problem - I think it depends on your OS - pity that Mozilla didnt mention this on the front page before people download it! The best solution is to reinstall 3.6 from this page - there are options for PC, Mac and Linux
http://www.mozilla.com/en-US/firefox/all-older.html
I hope this helps!!!!

TS3406 I cannot hear other people when I use my phone. The only way to make a phone call is to use the speaker phone. I have rebooted and restored the phone and still it will not work properly. What is the solution?

I can only use my phone by using the speakerphone. I have rebooted and restored. What is the solution

No case. The issue seemingly went away overnight. I don't know what caused it to occur or what happened to make it go away.

Since upgrading to Yosemite I cannot get directly to Netflix. I get a message about having to download Microsoft Silverlight. I can't get that to work and don't want it anyway. I just want to open Netflix and play the movies. What should I do?

Since upgrading to Yosemite I cannot get directly to Netflix. I get a to Netflix and there is a big message about having to download/install Microsoft Silverlight. I can't get that to work and don't want it anyway. I just want to open Netflix and play the movies. What should I do?

I can't get that to work and don't want it anyway.
You need Silverlight. That is the application that plays the Netflix movies.
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx

APP store locked up since upgrading to IOS5

Anyone else having problems with the App Store being locked up since upgrading to IOS5?///

I have found that whenever I want to get into the featured section of the app store, it tells me that my request cannot be completed. I've tried resetting my phone and resetting the app, don't know what else I can do.

Since upgrading to Leopard I cannot iSync to my Nokia 6233

Since upgrading to Leopard I cannot iSync to my Nokia 6233 via bluetooth (I never did it by USB). The devices are paired and I can transfer files via Bluetooth so the basic setup is there. I have installed the Nova Media phone plugins for isync and my 6233 appears on my isynch bar and allows me to chose what to sync but when I click sync it cannot connect. (I have also been unable to use launchtonet from Nova Media since the upgrade. When I try to use it I get a message that no devices were found within reach.) Something is out of kilter - anyone got a suggestion? thanks a lot, JJ

Hello,
I have the same Nokia 6233 and the following way solved the problem.
1. Go to /Applications -> iSync.app -> Contents -> PlugIns -> ApplePhoneConduit.syncdevice -> Contents -> PlugIns -> PhoneModelsSync.phoneplugin -> Contents -> Resources. (From Finder, use Shift-Command-G, for Go to Folder; or Control-click iSync in Applications.)
2. Open MetaClasses.plist in a text editor.
3. Search for <key>com.nokia.6230</key>. Then find the end of the script for the 6230 phone - the </dict> tag just before the next phone's <key> tag.
4. Copy the following script and paste it between the </dict> tag for the 6230 and the next phone's <key> tag:
<key>com.nokia.6234</key>
<dict>
<key>Identification</key>
<dict>
<key>com.apple.cgmi+cgmm</key>
<string>Nokia+Nokia 6234</string>
</dict>
<key>InheritsFrom</key>
<array>
<string>family.com.nokia.series40.3rdEd.bus.bt</string>
</array>
<key>Services</key>
<array>
<dict>
<key>ServiceName</key>
<string>com.apple.model</string>
<key>ServiceProperties</key>
<dict>
<key>ModelIcon</key>
<string>NOK6234.tiff</string>
<key>ModelName</key>
<string>6234</string>
</dict>
</dict>
</array>
</dict>
5. If you have a Nokia 6233, change all the references to 6233 to 6234.
6. Save and close the MetaClasses.plist file.
7. In the same folder, duplicate the file NOK6230.tiff. Change the filename to NOK6234.tiff (or NOK6233.tiff if that is your phone). This file is the image of your phone which appears in iSync - if you want an accurate pic of the 6233/6234, find one and save it as a 60x60 transparent .tiff file).
8. Open Bluetooth Preferences. Delete any existing pairing for your Nokia 6233 or 6234 phone.
9. Create a new pairing for your phone.
10. Open iSync and you should now be able to sync your phone:)
If it works just copy the MetaClasses.plist file and save it anywhere. For the next updates You just have to copy it into the folder in iSync. This helps You saving time.
If You want to use my MetaClasses.plist, You may send me Your Email-adress. Then I will send it to You.
Good luck

Nike+ ipod not working since upgrading to ios5

I used to link my phone to the Matrix machines which are Nike+ iPod compliant. It used to be fine, I used to run, the runs were never displayed as historic data on the phone but when I synced my phone with iTunes it used to update the website. This worked wheter I used the treadmill/ cycling machine etc.
Since upgrading to iOS5, nothing has synced with the Nike website. After my run a message comes up saying "Workout Completed. You can send your workouts to the Nke+ website in Settings". Am not sure why or how to get this working again.
Any help would be appriciated.

Sorry ignore this. I just went into Settings, went to the Nike+iPod section then at the botom there was an option to send workouts. I had pressed this before but it didn't work. It did today.
Difference today is that I'm trying from home with WiFi. Who knows, just glad its working!

Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows. The only music that works is the Sample and Theme music that comes with iPhoto. Any idea of what to do about this problem?

Since upgrading to OSx 10.9, I cannot place my music for iPhoto slideshows. The only music that works is the Sample and Theme music that comes with iPhoto. Any idea of what to do about this problem?

In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Credit to user keysandfood who figured that one out.

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.

I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R

Since upgrading to Lion I cannot connect to my Buffalo Terastation

Since upgrading to Lion I cannot connect to my Buffalo Terastation and get the following message. "The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem". I have updated the firmware on the Terastation but still can’t connect to it. I have also posted this message on the Buffalo forum. Any suggestions?

Lion changed the rules for NAS communication. See this Web page. As that page dates from last July, I'd hope that NAS vendors would have fixed things by now. I'd ask Buffalo directly whether that product supports the protocol(s) described in that article.

HT4623 Hi i am using iphone 3G older version and i cannot upgrade to IOS5 software because when i go to Settings General ...there is no words like Software Update....any help pls -thnx

Hi i am using iphone 3G older version and i cannot upgrade to IOS5 software because when i go to Settings > General ...there is no words like Software Update....any help pls -thnx

Thanks Niel
My current version says it is 4.2.1 (BC148)
I wanted to install Skpe and update new version of Whats App , but it prompts up ....Upgrade to IOS 5 , so if i go to iTunes , could you tell me step by step , how i should do that..
Thanks in advance

I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

The way I resolved this issue was to create a dual boot Mac, so that I am able to boot from either Mountain Lion or Mavericks. Running Vectorworks in a virtual machine just didn’t cut it.
I had already upgraded to Mavericks, which meant that trying to install OS 10.8.5 as a second operating system produced the error message saying it cannot be installed on this computer.
First, if you need a copy of Mountain Lion installer and you has previously purchased it, open the App Store app, press the option key and then click on the purchases tab. You will see a list of all downloaded software from Apple and you can download OS 10.8.5 again without paying for it a second time. If you had previously created a boot disk of Mountain Lion, which I had not, you can obviously skip this step and the next.
You will need a boot disk for Mountain Lion. After downloading the Mountain Lion installer, the easiest way to create a boot disk is to use a slick little app called DiskMaker X, which you can get here: http://liondiskmaker.com Next you will need a USB flash drive of at least 8GB in size. Install and run DiskMaker X, plug in your flash drive, and follow the prompts. In just a few clicks, your boot drive will be easily created.
Next, you will need to add a partition on your startup drive on which you will install Mountain Lion. Here is the procedure for creating the new partition: http://macs.about.com/od/applications/ss/diskutilitysize.htm You can find this at Apple support, but this site gives you additional procedures that may be helpful. I set my new partition at 50 GB, but you can do with less is you don’t have the space.
With those two operations done, and your OS 10.8.5 boot drive plugged in, restart you Mac and press the option key after you hear the chime. You will be asked which drive you wish to start from- select the boot drive. After your Mac boots up, you will see several options- choose install Mountain Lion (actually I think the option is reinstall Mountain Lion).
After completing the OS install, install your copy of Vectorworks, copy and move whatever files you need to from Mavericks, and you are in business. To boot from either OS, simply press the option key and select OS 10.8.5 when you need to work in Vectorkorks, or OS 10.9 for all your other tasks. Switching back and forth isn’t as advantageous as otherwise, but it is the best way to run Vectorworks without upgrading for the $1,500 or so that would be required otherwise.

Since Upgrading to Ios5 i cannot open my contacts! i have tried to disable the Icloud and still they do not open! anyone have any further ideas for me to try?

Similar Messages

Maybe you are looking for