Since upgrading to Mavericks I can only print one page of a multipage document.

Ever since I upgraded to Mavericks my HP Deskjet 6840 color printer will only print 1 page from a multipage document at a time no matter how I set the job. And sometimes it prints the same page even thought I set the parameters for a different page. I have the latest driver. I can't find any solution on the HP site or elsewhere on the internet.

The driver should be part of OS X, not something you download.
This link shows supported HP printers (6800 but no 6840).
http://support.apple.com/kb/HT3669#HP
I suggest you delete the printer, turn it off, restart your system, and turn the printer on and add it back in.
Barry

Similar Messages

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

Can only print one page to the Adobe PDF printer "device".

When I print to the Adobe PDF printer device I can only print one document. When I print a second document I get the message "Adobe PDF Creation cannot continue because Acrobat is not activated." However, if I reboot, I can again print a single document.
I'm running Windows 7 pro-64 bit. I have Adobe Acrobat X pro, version 10.1.7 installed AND ACTIVATED.
Any suggestions for solving this damn headache would be much appreciated. I'm sure tired of rebooting to print PDFs.
George Sundell

OK, here are a couple of ideas to try....
Go to Help and try Detect and Repair.
If you have Acrobat, you can try to distill the document or try a Save As
[signature deleted]

Can only print one page at a time

Using Adobe Reader 9.4.2
Operating system Arch Linux
Printer Brother DCP-115C
When trying to print more than one page at a time in a PDF document,
Adobe Reader appears to create the print
the print job appears in my print queue
the printer says 'Receiving Data', but only momentarily
the printer resumes 'normal' status
the printer does not print anything
It is as if there is very little data actually sent to the printer, even though the print job appears to be 254k in size
When I try to print one page at a time from a PDF document
Adobe Reader appears to create the print
the print job appears in my print queue
the printer says 'Receiving Data' for several seconds
the printer prints the page
no problem
It seems to me that Adobe is creating a print job (for multiple pages) that the printer either does not understand, or the printer believes that there is nothing to print.
I am able to print everything that I need to, but only one page at a time!
Does anyone else experience this problem? Do you know how to overcome this?

You can use printPages(1, 5), however I need to know how you print current page.

Can only print one page

Hi,
I can only print the first page of my pdf files, i have tried from other workstations (there are about 15 on a domain) and they don't have an issue and i have also tried different printers.
I get the first page ok then the second page is blank and the third page has the following:
ERROR: undefined
OFFENDING COMMAND: TKPSVK+ArialMT
OPERAND STACK:
false
I have tried uninstalling and restarting then reinstalling but i still have the same problem.
Any help would be greatly appreciated.
Pablo.

OK, here are a couple of ideas to try....
Go to Help and try Detect and Repair.
If you have Acrobat, you can try to distill the document or try a Save As
[signature deleted]

Can only print one item at a time

Hey everyone,
Bit of a Photoshop novice here, use it for DVD covers and labels. I have been using CS3 previously but upgraded to CS5.5 last year. The thing is on CS5.5 I can only print one page at a time even when I input say 20 copies to be printed, only one will print. That goes for the regular printer for printing covers and the disc printer.
I can open CS3 up and right away it will print however many I ask it to.
Is there something I am missing? Something so painfully obvious that it is staring me in the face but I am just not seeing it?
Thanks in advance!

It isn't a printer setting. I have 3 different printers connected to my system and all of them worked with CS3 fine. And when I delete the preferences folder for CS5.1 it works as it should but only once, then afterwards it only prints one copy, no matter how many I ask it to print!
So if it works when the preferences have been removed, then fails to work afterwards, how can that be a printer setting?
I have read elsewhere that others have had similar issues with CS5 and Windows 7.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Can only print ONE document then have to reset Airport Express to print aga

The title says it all.
Everything used to work fine until I installed Leopard. Now I can only print one document; subsequent documents will hang at 16% or 28%, etc.
Anyone else had this problem?
Thanks,
Mark

No, you are not the only person with the problem. I have tried it with both a "g" and an "n" Express (I bought the "n" hoping it might work better; nope). I have a Samsung CLP-510 plugged in to it. It prints one document, then I have to reset the Express before it will print again. When it tries to print the next document, it flashes "Unable to open device (read failure)!" briefly, then pauses the printer.
It's been driving me crazy since I installed Leopard, so I basically gave up on the Express as a print server as there seems to be no cure, and Apple seems to have no interest in fixing it. (I have been through several firmware updates since the problem started, and none have made any difference).
+Oddly, though, just now after the seventh reset, it accepted 6 of the documents in my queue (I had 22 in the queue, and I've just been waiting for it to pause, then resetting the router for each document) before it failed.+
Message was edited by: The Technomancer

Since upgrading to Mavericks, what to do with existing Pages as opposed to new downloaded Pages?

Since upgrading to Mavericks, I can't use Pages in the dock. Have to go to utilities to use Pages. Do I remove the old Pages from the dock and then move new Pages to dock or what?

Calendar is a system app that lives in the Applications folder, as such it is the same app as the original Calendar.app. Pages is a new app & replaces the last version, however Apple think you may still need the old version so they moved it aside & created a new one inside the apps folder. It's unclear what is the right thing to do with the Dock icon in this case, because of the two copies.
Both should still work, the older one has some features that the new one doesn't, so keep both around if you have a lot of Pages files, you never know when it might be needed.

Power View can only print one sheet at a time with Power BI Mobile Apps

I have PowerView for Excel 2013 on Power BI Preview. I have 2 reports sheet and 2 hidden data sheets on Excel.
I'm getting error on Mobile Application in Windows 8 RT tablet.
I should see 4 reports in preview page, but I see 2 correct reports and 2 errors.
Power View can only print one sheet at a time. Please switch to the desired sheet and try again.
Why this occurs? What should done in Excel?
Kenny_I

Thank you for reporting this issue. This is a known issue that we had fixed last week. In a few days, the updated version of the app will be available in the Windows store. At that time, your app should automatically get updated to the newest version, if
you have not changed your default settings.
If you still experience issues next week this time, please post back and perhaps share your workbook, so we can do a thorough investigation.
Thank you.

I can only print 1 page can somebody help

I can only print 1 page can somebody help
sl

I have the same problem with my HP C6380 MY8CJ880F6. For me it is +80% of what I am printing I only get 1 page and has to print the rest 1 by 1. The problem is 6 month old and I have tried almost everything except the right solution ;-}
Setup Windows 7, 64 bit (Danish). Wireless communication.
I have tried reinstalling, use HP diagnostics and a lot of other things. Diagnostics says everything is fine. Microsoft Fix It diagnostics says the same about the Windows 7 printer support functions.
My other printer a HP Designjet 111 runs perfect. When I am out of office I use other printers no problems. But the HP C6380 will in most applications especially Acrobat Reader only print 1 page at a time.
I have tried to change the printer into factory settings that sometimes do the trick for the Microsoft Office 10 products installed but not for Acrobat. Most of my documents are PDF so either i get the fixed or I will have to invest in another printer.
Any body with a solution ?
BR Erik

Can only print current page of a downloaded pdf via adobe reader

I can only print current page of a downloaded pdf via adobe reader. Any ideas? I'd like to be able to print "All".

You can use printPages(1, 5), however I need to know how you print current page.

Can only print one copy

Ricoh Aficio MP C5502A
Indesign CD5
Can only print one copy at a tme. Have tried PS and PCL drivers. ANy ideas?
Thanks

Hi,
Even if you print 1-page document with a simple text Frame content?
Jarek

Laserjet 2100 will only print one page at a time.

I recently acquired a second hand Laserjet 2100 Series. Installation was fine but it will only print one page at a time, I have to keep pressing the 'Go' button, which is very frustrating. The manual tells me that it is in 'Manual' mode but not how to change it. Can anyone help, please? O/S Windows 7. Thank you.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Since upgrading to Mavericks I can only print one page of a multipage document.

Similar Messages

Maybe you are looking for