Single Dev Environment and Code Line for 6 and CC?

Hi All,
Up until now, we were developing for customers who only used InDesign CS5.5 and CS6 - using Extension Builder 2.1.
The problem is that now a new customer only has CC 2014.1 (they just purchased it today). I found one hack how to create an Extension using 2.1 for CC 2014/2014.1. However, this hack doesn't support HostAdapters, which we require as we want to control the fly panel of the panel menu.
Also, I think CC 2014.1 supports only HTML5 panels. Does that mean a total re-write of all our code? And since CS6 does not support HTML5 panels - do we now have to maintain 2 parallel code lines until the last of our customers migrates to CC???
I'd appreciate any advice.
Regards,
mlavie

Hi mlavie,
You're no need to rewrite tens of thousands code.
You are free to use any UI framework that suits your needs.
As I understood, Adobe supporting only Photoshop HostAdapter in Extension builder 3 for now, so in any case, in my opinion, only HTML will not give a solution to your problem.
Instead you can write your own "HostAdapter" using Adobe Illustrator CC 2014 SDK, and connect it with your (Flash/Flex)extension. (check samples with Notifiers, it will help)
According to InDesign, It's strange, because everything works smoothly for me. Can you write more detailed about that?
ps, sorry for bad English.
Best Regards,
Gegham

Similar Messages

Facelets and code insight for XHTML

Hi,
what about support for facelets and code insight for xhtml?
Thanks,
Uros.

Hi,
actually the templating mechanism is deployable in shared libraries, which means you should be able to reuse this outside of JDeveloper with the right libraries in place. The issue we found with Facelets is with the required binding references that we need for ADF to work in templates (though this is an Oracle specific problem for as long as JSR 227 isn't turned into a J2EE standard) .
Also, templates in JDeveloper 11 are referenced at runtime, which means they can be changed on the fly even after deployment and all pages will reflect them. Plus, you don't need to configure a new extension and filter to your JSF files/configuration making it more straight forward.
And yes, it can be deployed to other J2EE containers than Oracle- Not sure what the open source plans are, but I'll point someone from our Trinidad supporters to this thread to shed some light on what the Trinidad community has in the plans.
Your point for a common templating support is well taken (though I wished there would be something better than Facelets ;-) )
Frank

Is there a way to create a heading with shading behind the text and thin lines above and below?

I'm working with InDesign CS6, Windows 7.
Is there a way, using paragraph rules, to create a heading with shading behind the text and thin lines above and below the text?
I'd like to create headings that look like these:
Thank you!

I have a document where I almost do such, but without the fill. I use a Head Style which Spans Columns for this instance; it allows the haeds to flow and fill the width.
Paragraph Rules above and below are turned on with plenty of offset.
I tweaked my setting to accomodate your need - It required only one instance, not above and below, and changing the stroke to a double stroke.
It may be necessary to create a custom stroke to modify the proportion of stroke vs fill. There is a difference of thin-thin and thick-thick, neither of which seemed perfect but might be dependent on the Character height.
Creating custom strokes is accomplished via the Strokes Panel.

When printing from Preview, the document prints with large print and many lines added and pages added

When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
Thanks again for helping me resolve this problem.

Black and white lines up and down screen

When I start up my macbook pro white and black lines appear for the startup screen in bunches. After that the screen is black but the keyboard is lit up and you can still hear the sounds of turning up the volume and music can still play.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Refresh Report and At Line-Selection and At User-Command

Hi All
I have 2 querries
1) I want to use At Line-selection and At user-command in the same report. But At line-selection is not getting triggered why? When I remove Set pf-status 'xxx' and at user command , then at line selection works . I want to user both at a time.
2) I am giving user ability to edit the report shown and when he comes back by exiting the editing I want to refresh the report which is shown already to him to give effect of his editing.
Thanks in anticipation
pM.

i just tried, and no problem at all.
In the <b>Recommended Function Key Settings</b> for F2 key add command "PICK"
Regards
Raja
since you are new to the forum, have a look at this weblog.
/people/mark.finnern/blog/2004/08/10/spread-the-love

C309A keeps going off- and on-line over and over again

I have a new C309A configured to print wirelessly. Everything installed correctly during setup and all network tests are successful. It worked for a few days but now I can't print since the printer looks to be going offline and then on again constantly (I can actually watch it change status over and over again if the printers folder...). If I manage to catch it when the printer is showing online I can print, so I know that my computer will talk with the printer. And I have another computer that prints wirelessly just fine.
I've tried tech support via chat and phone - big waste of time since they obviously have no technical knowledge and are just reading scripts.
I was told by one support contact that there is a fixpack, but it was for another model (4580 I believe). He indicated it would work on the C309A as well. HOWEVER when I downloaded it it of course would not install since I don't have that printer. I tried all product matches for 4580 (he said he picked the wrong one the first time so I tried again and again. Each time was just picking the wrong one apparently. Or could it be that he had no idea what he was talking about?) and none of them would work. There are no fixpacks for the C309A.
I've seen in other threads that this could be a firewall issue but I'm not so sure. I've tried disabling mine and still had the issue.
I'm running windows XP professional. my firewall is symantec. and my printer is currently a very large and expensive paperweight.
Anyone have any ideas????????
This question was solved.
View Solution.

When the printer goes offline, see if you can open the printer's internal web page by browsing to its IP address.
If you can, then we know communications between the PC and printer are working and that the offline messages are false positive indicators.
Next, I'd like to try a manual installation of the printer queue. Here's the sequence for Vista:
Click >> Start >> Control panel >> Printer.
Click the 'Add Printer' icon. The 'Add Printer' dialog box opens.
Click 'Next' button on the 'Welcome to the Add Printer' Wizard dialog box.
Select 'Local printer' in the Local or Network Printer dialog box.
Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on. Click "Next" button.
Under "Add Standard TCP/IP Printer Port" enter the printer's host name that is printed from the printer's netwotrk configuration page.
Now, select HP (not Hewlett-Packard) from the list of manufacturers, select Photosmart C309 from the list of Printer models and click 'Next' button.
The Printer name will be highlighted on the next window. Click 'Next' button.
It will ask for the Printer name -- leave the default value.
Click 'Yes' for making the printer default. Click 'Next' button.
The Print Test Page box appears.
Select 'Yes' to print a test page.
Click 'Finish' button to complete the installation.
It should print a test page.
BTW -- what kind of wireless-router do you have? Also, press and release the <setup> and <#> keys. This will print an internal connectivity diagnostic report. Scan and email me the report to my work email: wireless at hp dot com.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Please help me get rid of that stupid Navigator and that annoying voice and blue line once and for all!!!!

Hello,
I followed directions left by others and in Windows 8 there is no Explore All Settings but found Use computer without a display. The narrator box was unchecked to begin with and I cannot get rid of the sound and that stupid blue line all over my screen.
Any ideas?
Thanks.

Hi,
Based on your description, I understand that you want to disable Narrator in the Windows 8.
Did you mean that had un-checked
Turn on Narrator in Use the computer without a display panel (the path: Control Panel-> Ease of Access-> Ease of Access Center->
Use the computer without a display)? Please also click Make the computer easier to see in
Ease of Access Center, there also has a Turn on Narrator option. Please check if also un-check it.
Please also refer to following article and check if can help you.
Disable
Narrator on Windows 8/8.1 Computer | Steps and Pictures
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
In addition, I also suggest that you should post the question in
Windows 8.1 forum. I believe we will get a better assistance there.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can I setup my Browser to use my DSL line for downloads and T1 line for uploading

Hi,
i would like to setup my browser to use my DSL internet connection to open my emails from google and when i am sending it to use my T1 line. Please let me know if its even possible in a browser.
Thanks

The Operating System is what controls the incoming and outgoing connections, so that is really a Windows support issue.
The only thing that I can think of is to ask in one of the Satellite forums over here, for some ideas on how you might accomplish that:
http://www.dslreports.com/forum/
Satellite internet works similar to that, the download comes by Satellite, and the upload goes out by dial-up or other land connection.

How to implement this C code line: for ( int i = 0; i G_ReadLen; i = i + 2 )

I want to implement the following C++ code in labview but i cannot make or loop to increase by two
int j = 0; for ( int i = 0; i < G_ReadLen; i = i + 2 ) {
BYTE AD_H = ByteArray.GetAt(i);
BYTE AD_L = ByteArray.GetAt(i + 1);
ValueArray[j] = AD_H << 8;
ValueArray[j] = ValueArray[j] + AD_L;unsigned long Temp = ValueArray[j] >> 12; Volts[j] = ((float)ValueArray[j]) * 0.0048875;Message.Format("%X , %X - %X, -- %d, +%.3f Volts", AD_H, AD_L, ValueArray[j], ValueArray[j], Volts[j]); m_output_ep1i.InsertString(0,Message);
j = j + 1;
Thanks
Solved!
Go to Solution.

Your code will not work.
You are replacing elements of an empty array. A no-op in LabVIEW.
Besides there is a lot easier way to do this:
I just hope this is not a homework assignment.
And for completeness sake here is Mikes solution (seen below):
Ton
Message Edited by TonP on 11-14-2008 12:55 PM
Message Edited by TonP on 11-14-2008 01:03 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Read as U16.png ‏2 KB

SSAS2008 r2 and Excel Line Chart and Date Axis

Hi
Excel 2010. SSAS 2008 R2
I have a excel line chart made out from SSAS pivot table with a date dimension (date) and No of licences.
Currently, it displays 1/Jun/2014 to 30/Jun/2015 (FY2015) and this looks really ugly.
While keeping the details, I'd like to display by Month-Year.
However, while I can do this with other normal excel data, I just can not do it with SSAS Pivot table.
Under Axis options, I ticked 'Date axis' but it won't bring up date options.
I think I tried everything but just can not figure it out. I wonder if it is even possible.
Th date dimension is recognised as date because I can apply date filter. I want to make it neat. Can anyone help me with this please?
It must be 'Date' Level.
Kind regards

Hi SQLMa,
Could you please elaborate more detail regarding the "Date" dimension structure? In order to display the date format with Month-Year, we should build a hierarchy to organize the granularity of date dimension at SSAS level. Please
refer to the documents below:
Create a Date type Dimension:
http://msdn.microsoft.com/en-us/library/ms174884.aspx
Modifying the Date Dimension:
http://msdn.microsoft.com/en-us/library/ms166578.aspx
Regards,
Elvis Long
TechNet Community Support

This is regarding printing vertical lines for each and every field

Hi to all.....
1....Hi
here is a requirement
i want to print vertical lines and horizontal lines for each and every field in the output of a report.Here i want to see the output just like table i.e i want to draw line after each field.
                         suppose if the output list contains just 10 records, then the vertical line must end for 10 records.how to draw vertical lines for this requirement.
thanks and regards,
k.swaminath

Hi
In report you can use
sy-uline for horizontal line
sy-vline for vertical lines.
Check this sample report
DATA: BEGIN OF USR_TABL OCCURS 0.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
DATA: L_LENGTH TYPE I,
T_ABAPLIST LIKE ABAPLIST OCCURS 0 WITH HEADER LINE, BEGIN OF T_USER OCCURS 0, COUNTER TYPE I, SELECTION TYPE C, MANDT LIKE SY-MANDT, BNAME LIKE SY-UNAME, NAME_FIRST LIKE V_ADRP_CP-NAME_FIRST, NAME_LAST LIKE V_ADRP_CP-NAME_LAST, DEPARTMENT LIKE V_ADRP_CP-DEPARTMENT, TEL_NUMBER LIKE V_ADRP_CP-TEL_NUMBER, END OF T_USER, L_CLIENT LIKE SY-MANDT, L_USERID LIKE UINFO-BNAME, L_OPCODE TYPE X, L_FUNCT_CODE(1) TYPE C, L_TEST(200) TYPE C.
L_OPCODE = 2.
CALL ThUsrInfo ID OPCODE FIELD L_OPCODE
ID TAB FIELD USR_TABL-*SYS*.
CLEAR T_USER. REFRESH T_USER.
LOOP AT USR_TABL.
T_USER-MANDT = USR_TABL-MANDT. T_USER-BNAME = USR_TABL-BNAME. APPEND T_USER.
ENDLOOP.
SORT T_USER.
DELETE ADJACENT DUPLICATES FROM T_USER.
LOOP AT T_USER.
T_USER-COUNTER = SY-TABIX. SELECT V~NAME_FIRST V~NAME_LAST V~DEPARTMENT V~TEL_NUMBER INTO (T_USER-NAME_FIRST, T_USER-NAME_LAST, T_USER-DEPARTMENT, T_USER-TEL_NUMBER) FROM USR21 AS U JOIN V_ADRP_CP AS V ON U~PERSNUMBER = V~PERSNUMBER AND U~ADDRNUMBER = V~ADDRNUMBER WHERE U~BNAME = T_USER-BNAME. ENDSELECT. MODIFY T_USER.
ENDLOOP.
SORT T_USER BY NAME_LAST NAME_FIRST.
PERFORM DISPLAY_LIST.
TOP-OF-PAGE.
PERFORM DISPLAY_MENU.
    * End of top-of-page
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM DISPLAY_MENU.
    * End of top-of-page during line-selection
AT LINE-SELECTION.
IF SY-CUROW = 2. IF SY-CUCOL < 19. T_USER-SELECTION = X. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = . PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 36. CLEAR T_USER-SELECTION. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = X. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 50. PERFORM TRANSFER_SELECTION. PERFORM POPUP_MSG. ELSEIF SY-CUCOL < 67. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_LAST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 81. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_FIRST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 93. PERFORM TRANSFER_SELECTION. SORT T_USER BY MANDT. PERFORM DISPLAY_LIST. ENDIF. ENDIF.
    * End of line-selection
*& Form DISPLAY_LIST
FORM DISPLAY_LIST.
SY-LSIND = 0.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
LOOP AT T_USER.
WRITE: / SY-VLINE, T_USER-SELECTION AS CHECKBOX, SY-VLINE, T_USER-MANDT, SY-VLINE, T_USER-BNAME, SY-VLINE, T_USER-NAME_FIRST(15), SY-VLINE, T_USER-NAME_LAST(15), SY-VLINE, T_USER-DEPARTMENT, SY-VLINE, T_USER-TEL_NUMBER(20), SY-VLINE. HIDE: T_USER-COUNTER, T_USER-SELECTION.
ENDLOOP.
FORMAT COLOR OFF.
WRITE: /(108) SY-ULINE.
ENDFORM. DISPLAY_LIST
*& Form DISPLAY_MENU
FORM DISPLAY_MENU.
FORMAT COLOR COL_HEADING HOTSPOT. WRITE: (91) SY-ULINE, / SY-VLINE NO-GAP, (4) ICON_SELECT_ALL NO-GAP, Select All, SY-VLINE NO-GAP, (4) ICON_DESELECT_ALL NO-GAP, Deselect All, SY-VLINE NO-GAP, (4) ICON_SHORT_MESSAGE NO-GAP, Send Popup, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Last Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, First Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Client NO-GAP, SY-VLINE, /(91) SY-ULINE, /(108) SY-ULINE. FORMAT HOTSPOT OFF. WRITE: / SY-VLINE, , SY-VLINE, Cli, SY-VLINE, User , SY-VLINE, First Name , SY-VLINE, Last Name , SY-VLINE, Department , SY-VLINE, Telephone , SY-VLINE, /(108) SY-ULINE. FORMAT COLOR OFF.
ENDFORM. DISPLAY_MENU
*& Form TRANSFER_SELECTION
FORM TRANSFER_SELECTION.
DO. READ LINE SY-INDEX FIELD VALUE T_USER-SELECTION. IF SY-SUBRC <> 0. EXIT. ENDIF. MODIFY T_USER TRANSPORTING SELECTION WHERE COUNTER = T_USER-COUNTER. ENDDO. CLEAR T_USER.
ENDFORM. TRANSFER_SELECTION
*& Form POPUP_MSG
FORM POPUP_MSG.
DATA: L_MSG LIKE SM04DIC-POPUPMSG VALUE Experimental Message, L_LEN TYPE I, L_RET TYPE C. LOOP AT T_USER WHERE SELECTION = X. PERFORM GET_MESSAGE CHANGING L_MSG L_RET. EXIT. ENDLOOP. IF L_RET = A. User cancelled the message EXIT. ENDIF.
    * Get the message text
L_LEN = STRLEN. LOOP AT T_USER WHERE SELECTION = X. CALL FUNCTION TH_POPUP EXPORTING CLIENT = T_USER-MANDT USER = T_USER-BNAME MESSAGE = L_MSG MESSAGE_LEN = L_LENGTH
    * CUT_BLANKS =
EXCEPTIONS USER_NOT_FOUND = 1 OTHERS = 2. IF SY-SUBRC <> 0. WRITE: User , T_USER-BNAME, not found.. ENDIF. ENDLOOP. IF SY-SUBRC <> 0.
    * Big error! No user has been selected.
MESSAGE ID AT TYPE E NUMBER 315 WITH No user selected!. EXIT. ENDIF.
ENDFORM. POPUP_MSG
*& Form GET_MESSAGE
FORM GET_MESSAGE CHANGING P_L_MSG LIKE SM04DIC-POPUPMSG
P_RETURNCODE TYPE C.
DATA: BEGIN OF FIELDS OCCURS 1. INCLUDE STRUCTURE SVAL.
DATA: END OF FIELDS, RETURNCODE TYPE C.
FIELDS-TABNAME = SM04DIC.
FIELDS-FIELDNAME = POPUPMSG.
FIELDS-FIELDTEXT = Message :. CONCATENATE Msg from SY-UNAME . INTO FIELDS-VALUE SEPARATED BY . APPEND FIELDS.
CALL FUNCTION POPUP_GET_VALUES
EXPORTING POPUP_TITLE = Supply the popup message
IMPORTING RETURNCODE = P_RETURNCODE
TABLES FIELDS = FIELDS.
IF P_RETURNCODE = A.
EXIT.
ELSE.
READ TABLE FIELDS INDEX 1.
P_L_MSG = FIELDS-VALUE.
ENDIF.
ENDFORM. GET_MESSAGE
*End of Program
Regards
Pavan

Implementation of Oracle Coding Standards and Code Quality Checks

I wanted to implement a list of coding standards and code quality checks for my oracle packages,functions,views,tableetc .
for example
All variables with number datatype should start with N_ and charcter type with C_ in all my tables & views definition.
This can be identified during peer review & can be corrected, but i think this is a repeated process which i don want to burden the developers rather i wanted a tool which does all these kind of checks which can be automated.
Is there any tool which does this operation or can someone give me a little idea how can i automate these stuffs bu creating a generic oracle procedure which can run through all the tables,views and generate a error report for those which are deviating from the standards.
Thus we can reduce the manual effort spent on peer review, please suggest.
thanks in advance

maru wrote:
I wanted to implement a list of coding standards and code quality checks for my oracle packages,functions,views,tableetc .
for example
All variables with number datatype should start with N_ and charcter type with C_ in all my tables & views definition.Hungarian notation is dead. It has no place in modern programming languages. Has no place in PL/SQL. Anit ain't just me saying that.
+"Encoding the type of a function into the name (so-called Hungarian notation) is brain damaged—the compiler knows the types anyway and can check those, and it only confuses the programmer."+
Linus Torvalds
+"No I don't recommend 'Hungarian'. I regard 'Hungarian' (embedding an abbreviated version of a type in a variable name) a technique that can be useful in untyped languages, but is completely unsuitable for a language that supports generic programming and object-oriented programming—both of which emphasize selection of operations based on the type an arguments (known to the language or to the run-time support). In this case, 'building the type of an object into names' simply complicates and minimizes abstraction."+
Bjarne Stroustrup
2) Conditional Statements
IF (x = 1) --> Wrong
IF ((x = 1) AND (y = 2)) --> wrong
IF x = 1 AND y = 2 --> RightIdiotic rules. The simple rule should be readability of code. Not how many brackets to use, and when not to use brackets. Minute standards like detracts from designing and writing proper code, fast and efficiently.
There are many more rules (which is specific to ur application) which can be incorporated in the tool, there by giving consistency ,readability and easy to maintain for the developers.Bull. The more rules there are, the more difficult it becomes for programmers to write code. As it is no longer about writing readable and flexible and performing code - it is about double checking every single statement line against a huge list of rules about do's and dont's. It is not about getting the programmer focusing on solving the problem - it is about distracting the programmer with a complex and large rule list of how the code should look like.
Sorry - but this rubs me the wrong way. In that environment, I would be the first to tell you to shove your "+many more rules+".
I've developed systems in over a dozen languages over the years. I've seen all kinds of standards. The standards that work are those that are short, simple and sensible. Hungarian notation is not sensible. Writing reserved words in uppercase is not sensible. Dictating how brackets should be used is not sensible.
What is sensible is using the de facto naming standards in use today - as per .Net Guidelines for Names (MSDN) and Code Conventions for the Java Programming Language.
What is sensible is providing guidelines like bulk collection needs to be justified (not possible using SQL only) and use the limit clause to manage memory spend on the collection variable. Or how packages need to be used to modularise code, providing a public interface and private implementation.
Standards are about creating a sensible and easy-to-use framework for writing code. It is not about creating a list of a 1001 rules that a developer needs to remember and adhere to, as if the developer is now part of some weird religious sect that has rules for every single aspect of human behaviour.

How to read Images associate with Purchase Requisitions and its Line Items

Hello,
My scenario: i need to read the Images associated with PR and its line items and pass them as Idoc FM.
Any idea where are these images stored in the SAP table or they just available till runtime
Regards,
Abhishek

You can have a look at the link here [GOS Contents|http://help-abap.zevolving.com/2009/02/generic-object-services-gos-toolbar-part-5-get-note-attachment-contents/]
Please note that in your case if its attachments only then pass la_relat-low = 'ATTA*'. if there is no filtering then pass 'NOTE', 'URL', 'ATTA' as required.
For the business object of PR pass BUS2105 and instance id pass the PR no.
The tables related to this are srrelroles,srgbinrel,sood etc.

Link between code and code groups and inspection type

Hi All,
I want to know the link between code and Code Group for UD and inspection type?
There is an option of choosing Usage selected set in SPRO "Seeting for inspection type".If i dont enter anything there,will it show all the code groups in the system while taking UD?
Pls guide

Hi Shreya,
Yes, the link between code and Code Group for UD and inspection type is specific selection of UD related to specific inspection type. Ex. there are separate UD codes individually for Goods receipt against PO, Gr against Production or for In-process inspection ets. so If you assign the selected sets at SPRO Inspection type, then while doing UD system will show UD codes related to only that inspection type.
If you don't enter anything there at SPRO, you will see all the code groups in the system while taking UD and one can get confused in selecting the relevant code.
so assigning of UD selected sets, plant wise (tick) at " Inspection types" is best practice.
Best Regards,
Shekhar

Single Dev Environment and Code Line for 6 and CC?

Similar Messages

Maybe you are looking for