Single step workflow with multiple approvers (without using a group)

Hi,
is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
DO let me know if it is possible or if any of you have done that.
thanks in advance.
regards,
rubio

Hi Rubio,
I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
Regards,
Vikram

Similar Messages

Approval workflow with multiple approvers in sharepoint

Hi All,
I have created a sequential workflow using visual studio 2012 for sharepoint 2013.
I have multiple approvers for approving a document. I am able to create individual tasks for each approver by code
my problem here is tasks should be created based upon the hierarchy, i.e. the second task will be created only when first task is approved.
All my approvers are dynamic so I did this development in visual studio. Please give me some idea how to proceed for my problem.
Sarath Sannadi Sharepoint Dev at Saksoft

Hi sarath,
Thanks for the sharing.
Regards,
Rebecca Tu
TechNet Community Support

Merging multiple rows without using max group by

Hi guys,
Is there any better way to convert
with
test as
select '001' as id, 'Apple' as name, 'A' as segment1,null as segment2,null as segment3 from dual union all
select '001' as id, 'Apple' as name,null as segment1, 'P' as segment2,null as segment3 from dual union all
select '001' as id, 'Apple' as name,null as segment1,null as segment2, 'L' as segment3 from dual
select * from test
to
select '001' as id, 'Apple' as name, 'A' as segment1,'P' as segment2,'L' as segment3 from dual
without using max and group by?
There are about 5 million records and using max group by is slowing it down by a lot.
It is needed to be done by SQL.
Thank You

with
test as
select '001' as id, 'Apple' as name, 'A' as segment1,null as segment2,null as segment3 from dual union all
select '001' as id, 'Apple' as name,null as segment1, 'P' as segment2,null as segment3 from dual union all
select '001' as id, 'Apple' as name,null as segment1,null as segment2, 'L' as segment3 from dual
select distinct id, name
, last_value(segment1 ignore nulls) over (partition by id, name order by segment1) as seg1
, last_value(segment2 ignore nulls) over (partition by id, name order by segment2) as seg2
, last_value(segment3 ignore nulls) over (partition by id, name order by segment3) as seg3
from test
;No max or group by, but not necessarily any faster. If you post your actual query, some sample data with expected results, and the additional information requested in the following posts, then someone may be able to provide better suggestions.
When your query takes too long
When your query takes too long ...
How to Post a SQL statement tuning request
HOW TO: Post a SQL statement tuning request - template posting
Regards,
Bob

How do I go from using a single Apple ID with multiple libraries to using home sharing?

Until now my wife and I have opted to share our iTunes/Apple ID and use multiple libraries to manage our iPhones. This has become increasingly difficult...with issues such as having apps I've downloaded that she doesn't want automatically downloading to her library and even her phone. Now, add in the fact that I want to continue to manage my iTunes library from our PC and allow her to manage hers from her new MacBook Pro and we have good reason to move to home sharing with separate Apple IDs for each of us.
My question is the logistics of doing so. Not only do we need to replicate her existing library on a new Apple ID, but then we need to migrate all the necessary files over to her MacBook Pro. Quite honestly, I don't even know where to begin. Is it possible to associate her existing library with her new Apple ID without having to create her library from scratch? Then is there anyway to migrate only the items in her library over to her MacBook Pro as opposed having to move all of our music & apps? Where do I begin?
Thanks!

Okay...I misunderstood and thought we needed separate ID's...but I see we actually need to use the same ID which simplifies things in my mind a bit. But still some followups...
1) What do you mean by restore the library on her computer? Simply open her library file in iTunes?
2) On our current machine...media is actually split between a couple folders but all under the My Music folder. But there are multiple subfolders (iTunes, Her iPhone, and Amazon MP3). I presume as long as I copy over the entire My Music folder there shouldn't be any access issues when the library is opened on her machine?
3) Is there any easy way to get rid of all the extra files that she doesn't have in her library? For instance, all my music and apps that she doesn't actually want, is there any easy way of separating those out from the files that are actually linked to in her library? Vice versa for me...once we've go her library set up on her machine, any easy way to purge all the extra files from my PC that aren't actually in my library?
Thanks!

Using single SMB share with multiple Hyper-V clusters

Hello,
I'm trying to find out if I can use a single SMB share with multiple Hyper-V Clusters. Looking at:
How to Assign SMB 3.0 File Shares to Hyper-V Hosts and Clusters in VMM
I think it's possible. Since the File Server is going to handle the file locking it shouldn't be a problem.
Has anyone tried that?
Thank you in advance!

Hello,
I'm not sure that's possible, I get this from this statement:"Assign the share—Assign
the share to a virtual machine host or cluster."
Even if it worked I wouldn't do that. Why don't you just create multiple shares?

Can I communicate single PXI chassis with multiple computer using MXI

Can I communicate single PXI chassis with multiple computer using multiple MXI cards
we are using cvi with MXI we want to share channels for other computers Can we do with mxi

Yes this is possible when you use a PXI controller. Attached is a screenshot showing a possible configuration.
Jacob K || Applications Engineer || National Instruments
Attachments:
PXIMaster.png ‏20 KB

Single proforma invoice with multiple deliveries

Hi
I would like to know how to create a single proforma invoice with multiple delivery numbers. Please let me know how?
Thanks

Apart from the above option, you can also use T-code VF04 i.e. Billing due list
Regards,
Sagar

How do I create a single PDF file with multiple pages?

Hi, I occasionally need merge several jpg images into a single pdf file with multiple pages (one Jpg per page). I have tried doing this on Preview, and by selecting all the pages I want to include in my document and trying to save to Pdf through the "Print" function, but every time it only saves the first page.
Can anyone tell me if there is a way to save multple-page pdf files without having to purchase a specific program (i to this too infrequently to justify the cost)?
Thanks very much,

This works for me...
Open first image in Preview View > Sidebar. Drag the other images into Sidebar, then select all.
From File menu > print selected images. Choose PDF > Save as PDF
-mj

Can i setup a wifi router with my IPad2 without using a computer ?

Can i setup a wifi router with my IPad2 without using a computer ?

This is going to depend on what wireless router got get. Some want to do all administration functions via a ethernet cable connection for security reasons.
Once the router is configured, you will no longer need a computer.
Try looking for a router that configures through a web browser & allows administration from a wifi connections.
I think the easiest thing will be to have a friend come over & configure with a laptop. I believe that you can configure the router without have a broadband connection. You could configure it at a friends house. Might not want to connect to the friends broadband so not to confuse your friends broadband. ( this is only a worry if the router also includes the broadband model. Just a wireless router without a modem is not worry ).
Robert

Alv field with f4 help without using class

Hi,
Can any one give me a program of "Alv field with f4 help without using class".
Thanking you in advance.

hi
<b>Linking F4 Help to Fields</b>
For the last section, we will deal with linking F4 help to fields. It is easy. As usual, define, implement and register the event onf4 at proper places in your code. For F4 help, you must register the fields whose F4 request will trigger the onf4 event. For this you must prepare a table of type LVC_T_F4 and register this table using the method register_f4_for_fields. While preparing table you must include a line for each field which will trigger F4 event. For each field in the structure;
􀂾 Pass the fieldname to FIELDNAME
􀂾 Set REGISTER to make the field registered,
􀂾 Set GETBEFORE to provide field content transport before F4 in editable mode
􀂾 Set CHNGEAFTER to make the data changed after F4 in editable mode.
DATA: lt_f4 TYPE lvc_t_f4 WITH HEADER LINE .
lt_f4-fieldname = 'PRICE'.
lt_f4-register = 'X' .
lt_f4-getbefore = 'X' .
APPEND lt_f4 .
CALL METHOD gr_alvgrid->register_f4_for_fields
EXPORTING
it_f4 = lt_f4[] .
Preparing table for the fields to be registered to trigger F4 event
METHOD handle_on_f4 .
PERFORM f4_help USING e_fieldname es_row_no .
er_event_data->m_event_handled = 'X' .
ENDMETHOD .
A sample onf4 method implementation
Again, we set the attribute er_event_data->m_event_handled to prevent further processing of standard F4 help.
regards
Ravish
<b>
reward if useful</b>

Send mail with attached file without using Repository

Hello,
I want to know if have a way to Send mail with attached file without using Repository.
Regards
Elad

Elad,
Check this article where a image has been picked by the file adapter and sent as an attachment to the mail adapter.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816">Sending an Image File Through XI in a File-to-Mail Scenario</a>
For how to proceed without integration repository content look into this blog,
<a href="/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository">How to send any data (even binary) through XI, without using the Integration Repository</a>
Combining these 2 you have the solution.
Regards
Bhavesh

Frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through m

I guess I was not clear.....my fault....let me re-phrase: frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through my list of contacts and quickly select those contacts that I want to receive that particular email....thx

You need an app that allows group messaging. Enter group messenger in the search bar in the app store.

How can a family with multiple existing accounts use Home Sharing?

I'd like to use the new Home Sharing feature, but it appears to be restricted to families in which all of the family members share a single user account.
We already have separate accounts for each family member. Is there some way for us to use Home Sharing without abandoning most of our existing accounts, along with all of the purchases made by those accounts? I don't think anyone in this situation would be willing to do that.

Eh. I am not too sure since I have not messed with it much but I do have a great deal of experience with multiple accounts. Each computer can be authorized for multiple accounts. As can iPods. iPods can sync songs/videos/apps from multiple accounts as long as the computer is authorized with them. What I have set up here, is I buy my stuff I want, my parents buy what they want and so do my brothers. When my bro gets something I want I just move it to my computer. That way all our accounts are separate, but if there is something I want I can get it. Also, since the music no longer has DRM, it won't matter. It will play on any computer. What you should see is if you can just do the shared library with multiple accounts. Then if you don't have videos or such, you can get apps or music. Hope this helps!

Infopath Approval With Multiple Approvers

I am interested in having multiple people approve forms. The user will select the approvers using a people picker (tied to our active directory.) I would like to know if it is possible to have the form be approved my multiple people at the same
time, instead of a daisy chain.
There will be a maximum of 5 approvers, but may only have 1.
Can someone get me pointed in the right direction please.

Hi alex,
According to your description, my understanding is that you want to make multiple people to approve a form at the same time, and the number of the approvers is dynamic.
You can create a column based People&Group type, and on the Additional Column Settings section, set "Choose from: All users".
Then create a workflow with SharePoint Deisgner 2013, and the workflow is using SharePoint 2010 workflow platform. And After adding the "Start Approval Process", click the
these users, and then set the approver using "Workflow lookup for a user", like the screenshot:
Then, on the Lookup for People or Group dialog, Data source: Current Item, Field from source: the people&group column that you created.
Finnally, save and publish the workflow.
After the above, when you create a new item, you can type the approvers in the people&group column. After triggering the workflow, it will assign tasks to all people in the people&group column.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Error while posting Customer with Multiple sales areas using DEBMAS05.

Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.

I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat

Single step workflow with multiple approvers (without using a group)

Similar Messages

Maybe you are looking for