Single table Backup FND_STATS_HIST in Oracle11i

Hi
i need to purge FND_STATS_HIST table before purging i need to take backup of FND_STATS_HIST table .
what is best practice for backup of single table FND_STATS_HIST ?
Thanks
With Regards
A-Z

Hi;
i need to purge FND_STATS_HIST table before purging i need to take backup of FND_STATS_HIST table .
what is best practice for backup of single table FND_STATS_HIST ?You can take export if size huge or you can try below
create table FND_STATS_HIST_bckp as (select * FND_STATS_HIST)
Regard
Helios

Similar Messages

Backup single table partiton question?

HI we are using oracle 11.2.0.3 on linux platform and was wanting to know if there is a way to backup just a single table partiiton using rman? If so does the database need to be runnnig in archivelog mode in order to do this with the database online?
This is a database that has one single huge table that is partitioned by day and we are attempting to export out daily partitions using datapump export so that we can arhive them to tape but the disk system we have is not able to keep up and the export of roughly 128gb is taking over 8 hours and is failing beciase the undo is aging out.
We would like to bypass writing the partitions out to disk and just stream them to tape if at all possible?
Any help or suggestions are greatly appreciated.
Thanks.

HI, thank you for your reply. I have come to this conclusion also that we could move the partition to another tablespace and then backup just that tablespace. One of my problems here is that the database is not in archivelog mode because it was writing out so many archive logs and was causing a perfromance problem on the database because the storage could not keep up.
This is a database that it's only purpose is this one huge table that is partitioned by day and they are writing about 128gb per day into the partitions. The one table itself is over 10tb at this point in time and we are struggling with how to manage it.
We got the business to agree that we will only keep 3 months worth of data in the live table and we can archive the rest but the current method we had in place which was a datapump export and then backup the .dmp file to tape.
That method is no longer working beause the export is taking too long now because of the amount of data that is getting inserted on a daily basis and the export now is running too long and failing because it is taxing the I/O system on the server.
So thats why we are trying to use rman to write directly to tape.
The requirement from the businesss is that we may need to restore a partition from as far back as one year and not sure how this can be done if we would need to restore the tablespace from a backup that is almost a year old? I don;t think it is possible without all of the archive logs.
Any suggestions are welcomed...
Thanks.

Recover a single table using RMAN

Hi,
I'm working on an Oracle Database 11g Release 11.1.0.6.0 - 64bit Production With the Real Application Clusters option.
I did a bad update on a table.
I have a full backup level 0 before the update
Is it possibile to recover the single table in an instant before the update using RMAN?
Thanks in advance.
Samuel

Hi Samuel,
How long ago was the update committed? What's the value of undo_retention?
If the undo has not yet expired, the easiest way to recovery is through flashback query. (Note that flashback database does not have to be enabled for flashback query to work.)
See MOS Doc ID 238674.1.
If that's not a possibility, and flashback database is not enabled, the only other option is to do an out-of-place restore, of SYSTEM, UNDO, and tablespace containing the table you want to recover, and recover to point in time before the update. Then, export table, drop the database, and import table into your primary database.
Hope that helps,
-Mark

Export Import single table...

Gurus...
I am working on this single table which needs to be exported from prod and import into test.
As I understand I need to follow below steps:
1. Test - export table abc dump as backup
2. Prod - Export single table abc
3. Test - Drop table abc cascade constraints
4. Test - Import abc into test
Export par file:
Directory= dbpump
dumpfile= expdp_abc.dmp
logfile= expdp_abc.log
content= all
tables=user.abc
exclude=statistics,object_grant, tablespace_quota
flashback_time= systimestamp
Import par file:
Directory= dbpump
dumpfile= expdp_abc.dmp
logfile= impdp_abc.log
content= all
tables=user.abc
table_exist_action=replace
transform=segment_attributes:N
my doubts:
1. Is my process flow correct?
2. Export & Import file correct? or missing parameters?
3. What happens to all objects connected to the table, will that also imported?
4. Do I need to lock user during this process?
5. Any script to check whether all objects connected to table does exist in test after import?

Hi,
Process for table export & import.
+1. Create database directory in test as well as production:-+
--> create or replace directory directory_name as 'physical_path';
--> grant acsess on that directory to user.
+2. Backp table in test environment (in case if you need old data in your test env):-+
--> Create table BKP_table_name as select * from table_name; (table_name u want to import)
+3. Take Export backup in Production database:-+
--> expdp dumpfile=file_name.dmp logfile=file_name.log directory=directory_name tables=Owner.table_name
+4. On test server do the following actvity:-+
a. Just check for dependencies on that table using DBA_DEPENDENCIES.
b. Truncate table which u want to import
c. import table-
impdp dumpfile=file_name.dmp tables=owner.table_name logfile=file_name_imp.log directory=directory_name table_exists_action=APPEND
d. Just check for dependencies on that table using DBA_DEPENDENCIES.
And also you can use table_exists_action=replace
This will also import all depedent objects to the table..
Regards,
Edited by: XBOX on Dec 14, 2012 10:15 PM

Imp Command to import a single table

Dear All:
i want to import a single table from my backup and want to preserve all the existing indexes using IMP command.
UserID : NEW_USER
PWD: qwert1

imp system/password@tstdhk fromuser=syslog touser=newuser tables=logs200712 rows=y file=/u06/import_exp/syslog_logs200712_080217.dmp commit=Y grants=N statistics=NONE ignore=Y log=/u06/import_exp/logs_part_jan.log
Regards
Asif Kabir

Recover a single table from a complete rman

Hi
I need to restore a single table from a complete rman backup, but it seems like this backup is divided into datafiles and this table is allocated together with others.
I use a library for make backups.
Does anybody know how can I get this unique table's information from my rman backup?

Hi
Which version of Oracle are you using?
If you are using 9i you must restore the database with another name and dann export/import the needed tables.
If you are using10g you can try with the SQL-command: FLASHBACK TABLE
Bye, Aron

Flashback a single table

Hi there,
Is it possible to flashback a single table in Oracle, I don't want to have to flashback the whole database to restore a single table, in the event that the data in it deleted.
Thanks...

user9101605 wrote:
in the case of flashback table case (only DML activties),data will be taken from undo tbs right?
No, flashback logs will be used.
Sorry, my mistake.
Flashback Table uses information in the undo tablespace to restore the table
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/flashptr003.htm
Edited by: Nikolay Ivankin on 07.06.2011 17:19

Creation of SAP Query in SQ02 with Single Table With Condition

Hi All,
I want to Create SAP Query in SQ02 using single Table MCHA.
ii) I dont want all entries of MCHA Table I mean , I have to apply some Condition on this Table.
i.e Suppose I am having actual data in MCHA table is like this for Material M1.
Plant    Material   Batch   BatchCreationdate
P1          M1         B1       20.06.2007
P2          M1         B1       04.05.2009
P3          M1         B1       04.05.2009
But I want the Output of SAP Query is like this:
   Material   Batch   BatchCreationdate
      M1         B1       20.06.2007
That is irrespective of Plant if Material & Batch are equal ---> 1st record with Lowest date shoud get at the output.
Please help me How write the code on single table in the SAP Query.
Thanks,
Kiran Manyam

Hi,
Your query should be like this:
Select MATNR CHARG HSDAT
from MCHA
into table t_mcha
where matnr = Materlal number from selection screen.
The structure of t_mcha should contain the fields that you select.
Then sort the table by date ascending
Sort t_mcha by HSDAT.
Hope this solves your problem.
Thanks,
Sowmya

How to display data from 2 different groups in a single table

Hi,
Following is the requirement:
The XML Content is below
ListOf_ssAssetMgmtAsset>
-<ssAssetMgmtAsset>
<ssAccountName>1-1D09-83031</ssAccountName>
<ssAccountPrimaryCountry>USA</ssAccountPrimaryCountry>
<ssAssetNumber>13111027</ssAssetNumber>
<ssNaiAssetNumber>123</ssNaiAssetNumber>
<ssNaiGrantNumber>ABC</ssNaiGrantNumber>
<ssNaiProductType>System Security Software</ssNaiProductType>
<ssNaiSuperceded>123</ssNaiSuperceded>
<ssProductDescription>Upgrade extract local DB</ssProductDescription>
<ssProductName>1-1M5H-296</ssProductName>
<ssStatus>ABC</ssStatus>
<ssId>1X-ZY</ssId>
<ssCreated>01/01/1980</ssCreated>
<ssUpdated>01/01/1980</ssUpdated>
<ssCreatedBy>1X-ZY</ssCreatedBy>
<ssUpdatedBy>1X-ZY</ssUpdatedBy>
-<ListOf_ssAgreementEntitlement>
-<ssAgreementEntitlement>
<ssEntitlementEndDate>16/12/2009</ssEntitlementEndDate>
<ssEntitlementStartDate>16/11/2009</ssEntitlementStartDate>
<ssEntitlementType>Services</ssEntitlementType>
<ssNaiQuantity>2</ssNaiQuantity>
</ssAgreementEntitlement>
</ListOf_ssAgreementEntitlement>
-<ListOf_ssAgreementEntitlement>
-<ssAgreementEntitlement>
<ssEntitlementEndDate>10/12/2009</ssEntitlementEndDate>
<ssEntitlementStartDate>10/11/2009</ssEntitlementStartDate>
<ssEntitlementType>ServicePortal</ssEntitlementType>
<ssNaiQuantity>1</ssNaiQuantity>
</ssAgreementEntitlement>
</ListOf_ssAgreementEntitlement>
</ssAssetMgmtAsset>
</ListOf_ssAssetMgmtAsset>
The data needs to be displayed in the below manner where first grouping is by Account Country, then by Account Name. Then the table with 9 columns where in the first 5 columns are from first group and the next 4 are from second group.
Account Country
Account Name
ProductType Grant # Asset # Product SKU Product Name Entitlement Type Quantity /Nodes EntitlementStart Date Entitlement EndDate
I have the coding as
first for loop: <?for-each-group:ssAssetMgmtAsset;./ssAccountPrimaryCountry?>
second for loop: <?for-each-group:current-group();./ssAccountName?>
third which is for the table : <?for-each:current-group()?>
I close the above grp after product description.
One table with the first 5 columns and below second table is placed adjacent to the first to display the 4 columns with the grp <?for-each:ssAgreementEntitlement?>
how do I get all the 9 columns in a single row in a single table.
Any help is appreciated.
thanks

What is the lnk between the two
ssAssetMgmtAsset and ssAgreementEntitlement ?
you want to display all the ssAgreementEntitlement for every ssAssetMgmtAsset group ?
there shud be a link between them, you have link them and display.

Why do we create multiple aliases to a single table?

<h4>{color:#0000ff}Hi,{color}</h4>
<h4></h4>
<h4></h4>
<h4>{color:#0000ff} Why do we create multiple aliases to a single table in the same query?{color}</h4>
<h4></h4>
<h4></h4>
<h4>{color:#0000ff}{color:#000000}For Ex: {color}{color}</h4>
<h4>
{color:#000000}select name,address,phone, from emp e, emp e1{color}</h4>
<h4></h4>
<h4>{color:#000000}where e.empid = e1.empid;{color}</h4>
<h4>
{color:#0000ff}ofcourse the above query's where condition is not correct, but i am giving as an example only{color}</h4>
<h4>{color:#0000ff}I have seen similar kind of queries where a single table name is aliased 10 times in the same query{color}</h4>
<h4>{color:#0000ff}can someone help me to understand the logic behind it?{color}</h4>
<h4>{color:#0000ff}Thanks in advance{color}</h4>
<h4>{color:#0000ff}greddy.{color}</h4>
Edited by: greddy on Oct 24, 2008 2:46 AM

Hi,
When you say
FROM    emp e
,       emp e1you are using two copies of the same table.
Can you imagine using two copies of the same book at the same time?
Say you see a word (like "hyrax") that you don't know. You might look up that word in the dictionary.
The English sentence "Open the dictionary to the page containing the new word." is like this SQL query:
FROM    dictionary
WHERE   :unknown_word BETWEEN low_guide_word and high_guide_wordWhat if you saw that word while reading a book (let's call it book_a).
You might want to leave book_a open, and place the dictionary beside book_a, so you can easily compare how the word is used in book_a with the definition in the dictionary.
This corresponds to joining two tables in SQL:
FROM    book_a
JOIN    dictionary ON unknown_word BETWEEN low_guide_word AND high_guide_word
WHERE   book_a.page = whatever -- NOTE: both tables have a column called pageor you can use aliases for one or both of the tables
FROM    book_a      a
JOIN    dictionary d ON a.unknown_word BETWEEN d.low_guide_word AND d.high_guide_word
WHERE   a.page = whatever -- NOTE: both tables have a column called pageNow, imagine that book_a is itself the dictionary. Say you saw the word "hyrax" while you were looking up another word, "ibex".
You can do a side-by-side comparison, as above, if you have two copies of the dictionary. Leave one copy open to "ibex", and open the other copy to "hyrax".
This corresponds to a self-join in SQL:
FROM    dictionary a
JOIN    dictionary d ON a.unknown_word BETWEEN d.low_guide_word AND d.high_guide_word
WHERE   a.page = whatever -- NOTE: both tables have a column called pageNotice that this last bit of code is identical to the previous one, except that book_a is replaced with dictionary.
In this case, you must you a table alias, at least for one copy. It wouldn't make any sense to say "Leave the dictionary open to "ibex" and open the dictionary to "hyrax". You have to have some unique way of referring to each copy, such as "Leave the dictionary on my left open to "ibex" and open the dictionary on my right to "hyrax"."

Multiple clob fields in a single table

Are there any known performance issues associated with having 4 CLOB fields in a single table... the table as such will be relatively small.. like 100 MB... with most rows being << 50k.

Not really. If you need 4 CLOB columns and it makes sense to have alll the columns in a single table, go for it.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to restore a single table from a DP Export from a different schema?

Environment:
Oracle 11.2.0.3 EE on Solaris
I was looking at the documentation on DP Import trying to find the correct syntax to import a single table from a DP Export of a different schema.
So, I want to load table USER1.TABLE1 into USER2.TABLE1 from a DP Export.
Looking at the REMAP_TABLE options:
REMAP_TABLE=[schema.]old_tablename[.partition]:new_tablename
OR
REMAP_TABLE=[schema.]old_tablename[:partition]:new_tablenameI can't see where to specify the target schema name. The examples had the new table name residing in the same schema with just a new name.
I looked at the REMAP_SCHEMA but the docs say that will import the entire schema into the new schema and I only want one (1) table.
Any suggestions are most welcome!
-gary

I thought I tried that combination and it seemed to me that the REMAP_SCHEMA somehow over-rode the TABLES= parameter >and started loading all the objects.If it does fail (and it should not) then please post the details here and I will try to see what is happening.
Let me get back into the sandbox and try it again. I admit I was in a bit of a hurry when I did it the first time.We are all in a hurry, no worries. If it fails, please post the details and the log file.
Does it make any sense that one parameter would override another?No, this should never happen. We have tons of checks to make sure the job can't have multiple meanings. For example, you can't say
full=y schemas=foo --- Which do you want, a full export or a list of schema exports, etc.
Your suggestion was the first thing I thought would work.This should work. If not, please post the log file with the command and the results.
Dean
Thanks again for the help and stay tuned for my new attempt.
-gary

Two Fields in a Single Table

Hello All,
I'm a newbie to the forum & to Crystal(9), I've searched the forum and ca't exactly find an answer to my question:
My goal is to be able to pull the Company Member Type & the Contact Member Type as part of the same report in the selection criteria.
My problem is: They both reside in the same table...
The question is: "how to be able to pull the info?"
If I need to provide more or clearer info pleasde let me know. Any help is appreciated.
Lost in DC - DJ

If you have a single table datasource record duplication wouldn't be a result of the select expert. In fact, I can't think of a case where a single table datasource could possibly duplicate records.
The duplicates must be the result of a join.
To answer your initial question, the select expert you enter is subjected, in its entirety, to each record in the joined tables.
The problem that I see with the above suggestion relates to precedence.
This:
cond 1 AND cond 2 AND cond 3 OR cond 4
Is not this:
cond 1 AND cond 2 AND (cond 3 OR cond 4)
In the case of the non-paren-ed select statement, it will return records that satisfy ALL of the AND conditions OR just the or condition.
In the second case, it will return all records that satisfy condition 1 and condition 2 AND either condition 3 or condition 4.
Try bracketing the ored conditions from the same table. That should solve your select problem, but not the duplication problem.

How will check the space taken by a single table in a tablespace ?

How will check the space taken by a single table in a tablespace ?
dba_segments is giving the same values even if I truncate the table?
Pls reply

I need to know how can we find out the size of the table in the tablespace.use user_segments (bytes) column.
How much bytes it has taken ?value from user_segments, bytes column
If u delete records will the space be used for another table in same tablespace?No, it keep the space in the same table for future usage.
How can we free that space ?truncate or drop the table and reduce the size from tablespace, if you want to reclaim the space from the tablespace, OS level.
Jaffar

Adding a single table without a logical join to another table (OBIEE 10g)

Sometimes I want to just display a single table without a logical join to another table in the repository. However, everytime I move it to the Business Model and Mapping layer and perform a Global Consistency Check, it tells me that it needs a logical join and I am forced to create another table to join to it. Thus creating a dimension-fact relationship. There are times I don't need this relationship and just want to display some data. Is there anyway to get around this?
Thanks in advance!

Yes,You have to create a join.You cannot take single table to BMM layer.You can create an alias of the table.Join this alias and base table through any common column and take both tables to BMM and desired table to presentation layer.
Another way is to create a view in physcial layer.Write a select statement like
Select primary_key from Table
Where primary_key is primary key of base table.Join this view ith base table and repeat the steps defined for Alias.
Regards,
Sandeep

Single table Backup FND_STATS_HIST in Oracle11i

Similar Messages

Maybe you are looking for