SIT Connection Manager

Hi all,
I have installed the Simulation Interface Toolkit and I have read the SIT manual. However, when I want to do the example which appears, there is a problem. This is, in simulink there isn`t any problem but in Labview doesn`t appear the SIT Connection Manager on the front panel menu bar, Tools»SIT Connection Manager and I don´t know why.
If someone could help me, I would be grateful.
Thank you.

Do you have multiple versions of LabVIEW installed on your computer? If so, you may have installed SIT to another LabVIEW folder. Go to your LabVIEW\project folder and see if sitwiz.llb is there. If not, then SIT did not get installed to this version of LabVIEW. Check other LabVIEW folders on your hard drive and see if it got installed there instead. If so, then you can uninstall SIT, then reinstall and make sure the correct version of LabVIEW is selected when going through the installer wizard.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

How to specify finite simulation stop time in VI generated using SIT connection manager

Hello,
I have a SIMULINK model which I want to run on a desktop ETS. I'm following this procedure:
1. Convert the SIMULINK model in a .DLL using RTW build in Matlab. The target of this build is nidll.tlc.
2. Create a host VI with required indicators and map the parameters using SIT connection manager.
3. Configure the DAQ (and then SIT connection manager generated the driver and IO files for me.)
4. Using LV project, run the driver on the desktop ETS and host VI on the host machine.
The code is working fine, without any error.
My question is this: Since in the driver VI, the simulation time is set to -1, which implies "continuous", the simulation goes on until I hit the stop button on the host VI.
I tried changing this default value to some other value. The simulation then does run for the defined amount of time but then I'm getting error 2206.
What is an appropriate way to stop the simulation on the RT target?
Thanks
Gayatri
PS: I'm using LV 8.5, LVRT 8.5, SIT 4.0, Matlab @2007a.

The VI in the Driver VI called SIT Initialize Model.vi has an input called time step (sec) (-1: use model time step) which does what you want it to. It doesn't actually affect the time step of the solver used in the built model DLL, just the rate at which the main base rate loop actually runs in real time. In fact, base rate loop period would be a better name for this control. If you set it, you won't alter your model, but you will be able to adjust the rate of the base rate loop.
Simply create a control from this input terminal on your driver VI and fill in an appropriate period in seconds. Make sure to set this value as default in the control so that the Driver VI remembers it.
You will have to take into account that your model will still think it's running at the time step it was compiled at. So your model simulation time and the actual wall clock time won't match up.
Jarrod S.
National Instruments

Mapping to Variables Using SIT Connection Manager

Hello,
I have a quick question regarding the SIT Connection manager and mappings. I was wondering if it is possible to map to variables, using the SIT Connection Manager Wizard, that I can make in the Project Window and drop into my block diagram. I have the SIT system buried under another VI and it is a hassle to keep having to connect the variables up to their values. I would like to just be able to map directly to them. If this is or is not a possibility please let me know. Thank you.
Michael B
LabVIEW 8.5
SIT 4.0
Message Edited by Michael B on 11-30-2007 12:52 PM

Hey Michael,
Thank you for contacting National Instruments. I am not sure if I completely understand your question. Would it be possible for you to walk me through the process you are currently going through to set up these mappings?
Also, I wanted to clarify what you meant by connecting to variables. I know you can use the manager to map to indicators and controls, but I am not sure if this is what you are trying to accomplish.
I look forward to hearing back from you.
Regards,
Kevin H
National Instruments
WSN/Wireless DAQ Product Support Engineer

Using SIT connection manager with large simulink models is extremely slow

Hello,
I'm trying to use a large simulink model in LabVIEW but once the DLL is correctly generated and the SIT connection manager is invoked to explore the model sinks, sources and parameters, it takes hours to generate the model connections tree. Afterwards, when the connections tree is completed, it is impossible to handle it because every operation performed takes a lot of time and memory (i.e. to expand a block to see which parameters are inside).
The version of SIT I'm using is 2.0.3 with LabVIEW 7.1.
Is there anybody experienced with large simulink models and SIT?
Thanks and regards.
Ignacio Sánchez Peral
SENER Ingeniería y Sistemas S.A.
Control Systems Section
Aerospace Division
C/ Severo Ochoa, 4 (PTM).
28760 Tres Cantos (Madrid) Spain.
[email protected]
Tel + 34 91 807 74 34
Fax + 34 91 807 72 08
http://www.sener.es

The VI in the Driver VI called SIT Initialize Model.vi has an input called time step (sec) (-1: use model time step) which does what you want it to. It doesn't actually affect the time step of the solver used in the built model DLL, just the rate at which the main base rate loop actually runs in real time. In fact, base rate loop period would be a better name for this control. If you set it, you won't alter your model, but you will be able to adjust the rate of the base rate loop.
Simply create a control from this input terminal on your driver VI and fill in an appropriate period in seconds. Make sure to set this value as default in the control so that the Driver VI remembers it.
You will have to take into account that your model will still think it's running at the time step it was compiled at. So your model simulation time and the actual wall clock time won't match up.
Jarrod S.
National Instruments

Labview2011 SIT Connection Manager service

Good day, I am developing an application where I have to communicate com matlab simulink. I have reviewed several bibliographies and material .... in which I refer to SIT Connection Manager service, which I find in my version of Labview (2011) and matlab2011a
thank very much

Have fun.
Alex Thomas, University of Manchester School of EEE LabVIEW Ambassador (CLAD)

Site Connection Manager

i am new bie in Content server , just starterd learning the ucm and Site Studio 10gR4....
I want to practice 10gR4 , creating sites , i found 10gR4 sample videos viewlets that are helpfull in learing ,
but i am unable to make connection of 10gR4 with my UCM server
please guide

able to resolve the issue
was typing wrong url.
thnx

How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Sql server agent job failing to connect excel connection manager of SSIS package by 32-bit mode run time

I am unable to succeed with sql agent job, I am trying to execute the SSIS package through sql agent job by ticking 32 bit runtime check box in 64 bit machine , even it does not worked..
could any one helpme on this?
Source: Excel Load Connection manager "Excel Connection Manager"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class
not registered". End Error TS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed. End... The package execution fa... The step failed.

Hello Keerthi,
Can you please modify settings and set delay validation for Excel connection manager? I think its validating connection and failing because it might be picking that from some variable.
Alternatively, please run package using below and see what happens.
EXEC master..xp_cmdshell 'DTEXEC.exe /SQL "Folder\Package" /SERVER Servername'
I will recommend you to follow steps in below link.
http://www.sqlhammer.com/blog/running-ssis-packages-in-32-bit/
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Certificates in lieu of Oracle connection Manager for our Applets

I support an application named IDEA out of New York. The IDEA application is an INTRANET application for use within our company Firewall.
Currently, the IDEA application's front end resides on a Windows 2000 Server running IIS 5 and JRun 3.0. The back-end runs on Oracle 8.1.7 database on a UNIX Database Hosting Utility (DHU). Our applets communicate with the back-end database using Oracle Connection Manager that is installed on the Web Host.
We are trying to migrate to the DWeb environment (Linux cluster). The linux cluster is running Apache Tomcat. We have been told that installing Oracle connection manager is not a viable solution (our company does not support it). Because of this our applets cannot communicate with our database. Below is a brief description of this limitation and also the work-around.
====================================================================================================================================================
[i][i][i]Connecting to the Database through the Applet
The most common task of an applet using the JDBC driver is to connect to and query a database. Because of applet security restrictions, unless particular steps are taken an applet can open TCP/IP sockets only to the host from which it was downloaded (this is the host on which the Web server is running). This means that without these steps, your applet can connect only to a database that is running on the same host as the Web server.
If your database and Web server are running on the same host, then there is no issue and no special steps are required. You can connect to the database as you would from an application.
As with connecting from an application, there are two ways in which you can specify the connection information to the driver. You can provide it in the form of host:port:sid or in the form of a TNS keyword-value syntax.
For example, if the database to which you want to connect resides on host prodHost, at port 1521, and SID ORCL, and you want to connect with user name scott with password tiger, then use either of the two following connect strings:
using host:port:sid syntax:
String connString="jdbc:oracle:thin:@prodHost:1521:ORCL";
conn = DriverManager.getConnection(connString, "scott", "tiger");
using TNS keyword-value syntax:
String connString = "jdbc:oracle:thin:@(description=(address_list=
(address=(protocol=tcp)(port=1521)(host=prodHost)))
(connect_data=(sid=ORCL)))";
conn = DriverManager.getConnection(connString, "scott", "tiger");
If you use the TNS keyword-value pair to specify the connection information to the JDBC Thin driver, then you must declare the protocol as TCP.
However, a Web server and an Oracle database server both require many resources; you seldom find both servers running on the same machine. Usually, your applet connects to a database on a host other than the one on which the Web server runs. There are two possible ways in which you can work around the security restriction:
You can connect to the database by using the Oracle8 Connection Manager.
or:
You can use a signed applet to connect to the database directly.
These options are discussed in the next section, "Connecting to a Database on a Different Host Than the Web Server".
Connecting to a Database on a Different Host Than the Web Server
If you are connecting to a database on a host other than the one on which the Web server is running, then you must overcome applet security restrictions. You can do this by using either the Oracle8 Connection Manager or signed applets. ====================================================================================================================================================
It was suggested that we implement signed applets (it is our only alternative at this time). This is where, hopefully, you can help me. We are unfamiliar with using certificates and signing applets. We need to obtain certificates that will allow our applets to connect to our oracle database on the DHU. What kind of certificates do we use? Are their coding examples of how to use these certificates? We have a CA within our company but they cannot tell us what kind of certificates we need. How many certificates do we need? Do we install any certificates on the backend database server? Any information would be greatly appreciated. We are basically trying to get our applet to work outside the sandbox by establishing a connection to the database server.
Thanks in advance for your time.

Eston,
Have you searched SUN's java Web site? Maybe this article will help:
http://java.sun.com/developer/technicalArticles/Security/Signed/index.html
Good Luck,
Avi.

2 way Connected Management Groups in OpsMgr 2007

Hi,
Are there any issues in having 2 way connected management groups in 2007R2.
Site 1 is used in Jan, with Site 2 in standby but we want to see Alerts for Site 2 on site 1 so have connected Site 1 to Site 2 via connected management groups.
Following month site 2 is used with site 1 in standby, we can view Site 2 alerts via site 1 but not the rest of site 2 information
So if we link Site 2 to Site 1 we could monitor site 1 with site 2 in detail?
This a good idea or are there big overheads xfering info both ways?
Thanks

Hi,
As the connected management group is mainly for viewing and interacting with all the alerts and other monitoring data, I think this should related to the amount of the data.
Connecting Management Groups in Operations Manager
http://technet.microsoft.com/en-us/library/hh230698.aspx
Connected Management Groups in OpsMgr 2007 – How it works
http://blogs.technet.com/b/operationsmgr/archive/2009/03/04/connected-management-groups-in-opsmgr-2007-how-it-works.aspx
Thanks.
Nicholas Li
TechNet Community Support

MSDTC connection manager is unable to register with RPC

HI
I am using the Windowserver 2012. We mount a WCF application , the server is working fine.. sundenly this error occurred in production environment. what might be the reason. What should i check in my server? how to fix this ? I navigate to components
and click distributed coordianator nothing comes in the list like LOCAL DTC. I am very confused. it is not happening in any other sites. This server is database server for my application
Thank you.
Log Name:      Application
Source:        Microsoft-Windows-MSDTC
Date:          9/20/2014 9:00:41 AM
Event ID:      4358
Task Category: MSDTC Proxy
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      IO-DB1
Description:
The MS DTC Connection Manager is unable to register with RPC to use one of LRPC, TCP/IP, or UDP/IP.
Please ensure that RPC is configured properly. If "ServerTcpPort"
registry key is configured(DWORD value under the HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC for local DTC instance or under cluster
hive for clustered DTC instance), please verify if the configured port is valid and the port is not already in use by a different component.
Error Specifics:hr = 0x8007000e, com\complus\dtc\dtc\cm\src\iomgrsrv.cpp:2597, CmdLine: "C:\Windows\system32\mmc.exe"
"C:\Windows\system32\comexp.msc" , Pid: 956
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MSDTC" Guid="{719BE4ED-E9BC-4DD8-A7CF-C85CE8E4975D}" EventSourceName="MSDTC" />
    <EventID Qualifiers="49152">4358</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-20T02:00:41.000000000Z" />
    <EventRecordID>19391</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>IO-DB1</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">hr = 0x8007000e, com\complus\dtc\dtc\cm\src\iomgrsrv.cpp:2597, CmdLine: "C:\Windows\system32\mmc.exe" "C:\Windows\system32\comexp.msc" , Pid: 956</Data>
    <Binary>4D005300440054004300</Binary>
</EventData>
</Event>
Thanks & Regards Manoj

Hi Partner,
Thank you for your post.
From your description, I see that the current issue is you notice Event ID 4358 error (source: Microsoft-Windows-MSDTC) logged in Application log.
Please let me know if I misunderstand anything or you have any additional information.
Firstly, could you help clarify that what operation you are performing while the issue occur? It would be nice if you can provide a GUI error message if any.
Currently, based on the error message and my research, some incorrect register key about RPC dynamic port resulting in MSDTC behaves unexpectedly might cause such symptom.
If that is the case, let's take the following steps to check our issue.
[Note: As the operation is related to the registry key components, I suggest we backup the entries firstly before performing the steps]
1. Delete all the register keys about RPC dynamic port you inserted manually.
2. Configure the ports via UI.
3. Reboot the server.
Please let me know if there is any update. Thank you for your time.
Best Regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Lenovo Mobile Broadband Connection Manager for Windows 7 - ThinkPad

Hello
i want to ask a Question , why Lenovo Still did not make
(Lenovo Mobile Broadband Connection Manager for Windows 7 - ThinkPad ) ??!!!
i look at the Drivers PageAnd i only found this : For windows VISTA and XP :
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70946
BUT , Where is WINDOWS 7 VERSION ????!!!!!!!!, What are they doing all this time ???
is this the Support which Lenoveo Give to there Customers? , i hope not .
I am asking lenovo to give me as a Customers , the software i need as fast as possible .
Greeting,
Al-allan Alaa
Solved!
Go to Solution.

Try this URL:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT037696#broadband
-gan

Can I have more then one MVIEW site connected to single master site?

Hi,
I need one help from your end.
Currently I am working on Basic Replication.For that I am using Read only Materialized views.first i tried with one master site & one Materialized view site its working fine,Can I have more then one MVIEW site connected to single master site referring to same database ? if so how to achive this one..

Actually one of my senior told me that you need to change number of OPEN_LINKS value like that so for that reason I asked this question.
Still that problem not solved..
I will explain what are all the things I did ok.
IN MASTER SITE:
I am creating read only MVIEW's.
first i created one user repadmin and have given
1>execute any procedure
2>dbms_repcat_admin.grant_admin_any_repgroup
3>dbms_repcat_admin.grant_admin_any_schema
4>select any dictionary
and all other grants to repadmin user
then I changed global_name = 'zxincmp' on Master site.
Then I created mview log for each table (for 85 tables) & then I created mview's for that table on Master site itself. later I took a dump of these 85 mview's . then I transfered this dump to one of my mview site.
IN MVIEW site:
I created one user zxdbp_55 and all the above rights are given to this user & i created one public dblink
"zxincmp" using "TO_CMP"(master site).Then I imported that dump which i took from master site.
then i created one private link zxincmp in one of my mview site.then i used DBMS_REFRESH.MAKE('')
to refresh all my tables & to set the interval..
after that i created index on the mviews..
this will works out fine for single master & single mvirew site.but I tried with the same procedure to prepare one more mview site,everything is fine but main problem is second mview site is not getting refreshed automatically,i need to do refresh manually from enterprise manager.. then it will get refreshed.
how to overcome this problem? I am using same db name ,dblink,refresh group for both the mview site will it affects anywhere?
Thanks & Regards,
Hanumanth.

Site to Site Connectivity Between BE6K and Voice Gateway 2901

Greetings,
Is an Ethernet handoff required for site to site connectivity between BE6K and a voice gateway 2901. My vendor is suggesting that it's required in order for both sites to see the BE6K as one phone system. However, here in lies the problem. I have a point-to-point T-1 between the sites that does not have an Ethernet handoff, just the smartjack to the T-1.
What would I need to get this to work? Have a router at each site? If so, which model? Or is there a component I could add to the BE6K or voice gateway?
Any help would be greatly appreciated.
Thanks in advance.

Ethernet handoff just means that the provider will deliver the circuit using Ethernet. What circuit is your provider delivering for you? Do they manage your WAN? Like I said what you need is ip connectivity between your sites and BE6k. If your T1 connection provides WAN connectivity and you have ip connectivity between the sites, then I don't know what you need any handoff for. The question is do you have ip connectivity between the sites via your T1 connection

Remote Desktop Connection Manager can only open 6 sessions at a time on Server 2012

I am only able to open, and view thumbnails, for a maximum of 6 RDP sessions on my Server 2012 box at a time in Remote Desktop Connection Manager (RDCM). If I add more sessions I just get a variety of connection errors for the additional sessions. If I activate
a 7th session one of the existing 6 sessions goes off-line with a connection error message. Sometimes the error says 3334, sometimes the error says 0x8345000E, and sometimes it just says there is a connection error.
I have checked Group Policy on the server to ensure I don't have any settings restricting the number of RDP sessions.
In fact, I will often have 30 or 40 RDP simultaneous sessions opened, I am just not able to view them all in RDCM. I have seen reviews of RDCM with screenshots showing dozens of thumbnails so it seems to be something that's possible to do.
Are there any settings I should make on the server to allow RDCM to connect to more than 6 simultaneous RDP sessions?
Just to be clear, all these RDP sessions are running on the same server. Also, I am just using the trial license for Server 2012 and Remote Desktop Services right now. I don't think that should have an impact, but I wanted to be thorough.

Thanks Jakub for "corflags" info.
Unfortunatelly it doesn't work because running mRemoteNG.exe process in 64bit can't load MSTSC ActiveX component (referenced assemblies) because original files were assembled from 32bit dll [mstscax.dll]?
Error message when making RDP connection:
Could not load file or assembly 'Interop.MSTSCLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. An attempt was made to load a program with an incorrect format.
I was able to create new AxInterop.MSTSCLib.dll and Interop.MSTSCLib.dll assemblies from 64bit dll version and now it works with "AnyCPU":-)
http://www.filedropper.com/axinteropmstsclib-mremoteng
Using AxImp.exe and TlbImp.exe didn't worked for me because it creates assemblies in wrong namespace "MSTSCLib" instead of "Interop.MSTSCLib" (AxImp.exe) and TlbImp.exe for changing namespace generated many "marshaled errors"
so final .dll wasn't working.
Adding MSTSCAX.dll reference in Visual Studio directly created correct and functional assemblies. Who don't know how to create 64bit compatible assemblies or don't have Visual Studio, feel free to check linked file.
Hope it helps
P.S. Sorry for possible technical misinterpretation, I am not programmer so creating new assemblies was trial-error process...

SIT Connection Manager

Similar Messages

Maybe you are looking for