Skin Customization not working in OBIEE 11.1.1.5.0
Hi,
I followed the Oracle white paper (http://www.oracle.com/technetwork/middleware/bi/customizing-oracle-biee-11g-176387.pdf) & defined the custom skin and stylesheet in analyticsRes folder. I also defined the CustomerResourcePhysicalPath,DefaultSkin and DefaultStyle tag in instanceconfig.xml.
When I restart the services, it works fine and I am able to see the custom skin. When I do a "view page source", I can see that it's referring to analyticsRes folder. But after couple of hours it again reverts back to original skin (sk_blafp). When I restart the services then it works fine. But it again reverts back to original after couple of hours.
I am not sure if I am missing something.
Thanks,
Satya
Edited by: Satya on Mar 22, 2012 8:46 AM
Are you in a single environment or a clustered one. If you are on a clustered environment, the folder needs to be setup on both servers.
Similar Messages
-
Filter did not work at OBIEE Version 11.1.1.7.0
String repSQL = report.generateReportSQL(reportRef, rp, m_sessionID);
The “Filterexpression” is working well for the OBIEE Version 11.1.1.6.0 but it is not working for OBIEE Version 11.1.1.7.0.
(i.e) While i try to run “Filterexpression” in for OBIEE Version 11.1.1.7.0. , i get the following errors
AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server faultSubcode:
faultString: Assertion failure: pMatchFilterFromPropBag != 0 at line 3051 of roject/webreport/globalfilterutils.cpp faultActor: faultNode: faultDetail:
{com.siebel.analytics.web/soap/error/v1}Error: <sawsoape:Code>ACIOA5LN</sawsoape:Code>
<sawsoape:Message>Assertion failure: pMatchFilterFromPropBag != 0 at line 3051 of project/webreport/globalfilterutils.cpp</sawsoape:Message>
<sawsoape:File>globalfilterutils.cpp</sawsoape:File>
<sawsoape:Line>3051</sawsoape:Line>
Assertion failure: pMatchFilterFromPropBag != 0 at line 3051 of project/webreport/globalfilterutils.cpp
ead.run(SimpleThreadPool.java:557)Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Flash video with cuepoints and skin does not work
Hi guys, i created a SWF file based on the template available
here
http://www.adobe.com/devnet/flash/articles/vidtemplate_mediapreso_04.html
Basically the movie has navigation buttons on the left side
of the video display to enable users to jump to predefined sections
(topics) within the video. It also has the video controls under the
video.
I imported my video as well as the sample provided in the
webpage above and the clip does not work in Presenter. I can see
the skin but the buttons flash and we cannot see the video. I'm not
a Flash or Presenter expert. Just wondering if anyone can help
troubleshoot this. We would really like to embed a swf with
navigation buttons into Presenter. is this possible? ideas
appreciated.
ThanksI'm sure someone will post a workaround for you (there are about 4 or 5 different workarounds people have posted at various times). But I wanted to thank you for your post. My experience as a very recent PC to Mac convert has been frustrating, mostly due to Keynote. When I first started using Keynote I was amazed at what it could do. I spent a lot of time working on a project (several days) only to spend another several days trying to figure out why it wouldn't Export. I finally logged onto the forums and see that people have been posting about this problem for MONTHS. It's been very frustrating to say the least and is a major flaw.
Your note is the first indication I received that Apple is truly working on this issue. I feel for people who posted months ago waiting for an update every day. Like them, I sent a support email (not answered).Your note shows both hope and progress. Apple could really convert a lot of people if it got software like Keynote to work correctly. I'm still blown away by its power. But it's like owning a Ferrari with now wheels. It has a lot of power, but there's nothing you can do with it until you get wheels.
Cheers! -
Object Level security not working on OBIEE 11g 11.1.1.7
Hi,
I am experiencing problems with object level security applied on application role in 11.1.1.7 version. If i create a user and assign that user to a application role and give that application role permission to Access Answers in Manage previleges, it is not working. If i directly add a user to permission list in Manage previleges section then user is able to access the answers. I added that application role in "Access to Answers" section in Manage previleges section. Permission for Authenticated users is denied.
We recently upgraded from 11.1.1.5 to 11.1.1.7. Please can someone confirm if it a bug in 11.1.1.7 or it is because of the upgrade process.
Regards,
SandeepHello Sandeep,
I have just verified the below scenario as you said but didnt find any issue.
I have just created a User, Group and Applictaion Role under default authentication provider . Assigned user under group and group under newly created application role and provided access to answers for new application role under manage privilages and I am able see it.
This might not be a 11.1.1.7 bug check it from upgrade end.
Regards,
Srikanth -
Function Calendar not working in OBIEE 11G - Analysis
This code works in 10.1.3 but not in OBIEE 11.1.1, Please let me know the correct code.
Error: Query Failed: [nQSError: 22025] Function Calendar Extract is called with an incompatible type
case when "- Calendar"."Year" = YEAR('@{var_date}{2012-11-05}') then 'Current' Else 'Prior' endCheck the data type of the column being used to populate the variable. The Year Function works fine. I suspect the data type is not date. If you don't have date columns in your database and are creating one (ex., using MM, DD, YYYY columns explicitly)then check the default date format in your environment either double click the physical database folder -> features or in your NQSconfig. it should be in date data type.
-
Hi all,
Previously, we were using OBIEE 11.1.1.5.0 and we were able to assign users to application roles by using the initialization block to assign the ROLES session variables.
1. My USER_SECURITY table in Oracle database:
USER_NAME | USER_ID | ROL
user1 | 1723 | GobalDataRole
user2 | 1739 | GobalDataRole
user3 | 1743 | GobalDataRole
2. The SQL query in my session initialization block:
select USER_NAME, USER_ID, ROL
from USER_SECURITY
where USERNAME = ':USER'
3. The row-wise initialization option is not checked.
4. In the Oracle Enterprise Manager Fusion Middleware Control, we created new application role: GobalDataRole and sync with rpd.
5. The GobalDataRole is used in the RPD to filter the data under permissions --> data filter. GobalDataRole only has access to Country A data.
6. Result: under my account, also in rpd Manage --> Sessions, user variable details
User_name , user_id & Rol variable is working fine as expected,
When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
User1, User2, and User3 are able to see the data correctly according the their data access setup.
Now, we using OBIEE 11.1.1.7.1 and using the same method, but we not able to assign users to application roles by using the initialization block to assign the ROLES session variables anymore.
Result:
User_name & user_id variable is working fine as expected, but the ROl variaible is not capturing the DB value,
When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
User1, User2, and User3 can see all data (which is wrong) because they are not assigned to the correct application role that sets the data restriction/filter.
Has anyone encountered the same issue? Any advice on how to solve this?
Thanks in advance!
Satheeshkumar PThanks user10615659 ,
- Yes the variable ROLES available in OBIEE 11.1.1.7.1
- Tested the init block and variables in offline rpd its working as expected.
- In online rpd, except ROLES and GROUP variable remaining variables working fine.
- Verified log file in both online and offline init block testing - the init block execution is successful.
Thanks -
I'm using Captivate 3 and daisy-chaining programs together.
Menu Builder is not an option at the moment so I've created a Menu
using the Project|Skin options. I browsed to find the .cp program
but when the programs are published, the menu doesn't work even
though the daisy-chaining does work. I've read that Captivate is
smart enough to find the published program, even though I'm
pointing to the source program. I'm publishing both the SWF and the
EXE formats. I've searched the forums and can't find any solution
to getting the Skin menu links to function--with a daisy-chained
program. NOTE: The reason I'm daisy-chaining is because I tried to
create the program all in one file and I'm having huge issues
getting the program to load (about 2 minutes to start from a
CD)--so this is what I'm trying for a solution. Help!I'm noticing that when the menu link is clicked (on the EXE
program) it's looking for an .htm file--which is not created when
publishing an EXE file or at least I'm not seeing that option.
Hopefully that doesn't mean you can only create links for SWF
publishes... -
Safari 5.1, customization not working.
In Lion, old bookmark bar sites will not stay deleted. Also the customization of the toolbar does not stick. what do I do? Is there a problem with Lion?
I have a vista windows basic O/S operating using a compaq laptop with Safari alongside googlechrome and internet explorer use safari for it's simplicity and user friendliness when gaining access to the web.
Downloaded latest safari 5.1 software update as it was available and prompted me to do so, did this simple task but since then i have not been alble to use the **** thing tried everything including uninstall and reinstall but to no avail.
Wondering if any others can help me solve this annoying problem, I assume that Apple have had some corrupt files uploaded to the web and consequently everything has had this problem.
I know asumption is the mother of all **** ups and I may have missed a simple operation to put it right but I am not an expert and need some very good techy help to put this back into working order please!!!!!!!!!!!!!!!
CHEERS
Nobbynobsocs -
ODBC and OCI not working with OBIEE 11g Client on 64 bit machine
Hi,
I have Installed OBIEE 11g client (Admin tool) on Windows XP Professional 64 bit machine.. I have Installed 11g database on the same machine but while importing Metadata using admin tool. getting "Connection has failed" error message... Can someone tell me whats the issue..
ODBC and OCI works fine with OBIEE 10g Admin..Hi,
Oracle_BI1\network\admin folder gets installed with full obiee 11g Installlation and I have installed only 11g client as I have OBIEE 10g already Installed on my machine..
Installation is as follows:
ORACLE 11g CLIENT Installation is as follows:
C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus Client
ORACLE 10g Installation is as follows:
C Drive:
ORACLE BI
ORACLE BI Data ( everything is working with this)
latest Log Info is as follows:
[2012-02-02T11:05:00.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 24fc] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:05:16.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:32:53.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified. -
Filter Grouping not working for OBIEE 11g
Hello!
I need some help on the below:
I have built a simple report in OBIEE 11g with FILTER grouping on two dimensions as below:
Operative Hierachy is equal to Europe, IMEA, APAC, China Focus Country, Americas, US and Canada
and Accounts is equal to Net Sales (i), Gross Margin (i), GM% (i)
or
Accounts is equal to Gross Margin, Net Sales, Gross Margin %
and Operative Hierachy is equal to / is in Organizations Total
The report was working as expected; but now suddenly it's showing no results with the error "+The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values.+" - even though data is present ! - I have tested this by splitting it into two reports (with only the AND conditions)- which is then woking as expected.
Points to note:
--There had been no change on the Report, when it stopped showing results.
--I have tested this filter grouping with other dimensions- & they are working fine.
--The OBIEE reports are fetching data from ESSBASE cube.
--Only thing which I can remember when it stopped working is that, there had been a data load on the ESSBASE cube. But other reports using these dimensions are working.
Has anyone faced the same issue before. Please help.
Edited by: Anu on Jan 22, 2013 12:31 AMHi User, Vijay,
Yes I have checked the generated SQL queries and the MDX queries as well. Both queries are generated as expected, but returns no result.
But now I have found out how these two different dimensions are different from my other dimensions. Only these two dimensions have a SORT order logical column defined in the BMM layer- which I think is causing the problem, BI Server not able decide which column to sort. So, the sql gives result when I cimment out one of the SORTKEY
SELECT
0 s_0,
"PSS Essbase"."Accounts"."Accounts" s_1,
"PSS Essbase"."Operative Hierarchy"."Operative Hierachy" s_2,
-- SORTKEY("PSS Essbase"."Accounts"."Accounts") s_3,
SORTKEY("PSS Essbase"."Operative Hierarchy"."Operative Hierachy") s_4,
"PSS Essbase"."Facts"."Measure" s_5
FROM "PSS Essbase"
WHERE
((("Operative Hierarchy"."Operative Hierachy" = 'Europe') AND ("Accounts"."Accounts" = 'Gross Margin'))
OR (("Operative Hierarchy"."Operative Hierachy" = 'Russia Focus Country') AND ("Accounts"."Accounts" = 'Sales ASP')))
ORDER BY 1, 5 ASC NULLS LAST, 4 ASC NULLS LAST
FETCH FIRST 65001 ROWS ONLY
Any views on what happens when we use two dimensions in the same report which have sort columns defined in the repository... -
Lync 2013 meeting invitation customizations not working for some users
Hello Microsoft TechNet Forms,
I have a strange problem that I am totally stumped on. I made some modifications to the Lync 2013 meeting configuration to add in my company's logo, a footer and set a custom help Lync URL. Now everything seemed to work expect for myself and
one other person I tested with. If I try creating a new Lync 2013 meeting via my Outlook 2013 the normal stock Lync meeting invite appears. Yet testing with any other user everything I have changed appears as expected and I am at a total loss to why.
I have so far from troubleshooting determined it must be something with my account that is causing it but I have just not been able to determine what. As signing into a different machine yields the same result yet testing with another account that is
known to work on the exact same machine works correctly with the different account. I have tired deleting and re-crating my Lync account just in case that had something to do with it but that didn't fix the problem. I have tired repairing Office 2013 to
running windows update on Office 2013 which didn't help.
The changes I made to the meeting configuration are global scoped. I have so far not found anything online from anyone ever reporting a similar issue to this. At this point I am stuck on what I should be looking for with regards to what is stopping
the meeting invite updating for myself and the other person. Given I don't know what mechanism is involved with updating the Lync meeting invite on Outlook 2013 I am stumped. I am open to any suggestions someone might have as to what to do next or what might
be the cause of this problem.
Nicholas,Hi Nicholas,
Can you compare your account with other’s and check if your account is applied any special policy in Lync Control Panel ?
Best regards,
Eric -
"Open Link in new window" not working with OBIEE 10.1.3.4
Hi All,
Recently we upgraded from Siebel Analytics to OBIEE 10.1.3.4.
In OBIEE Go to Settings > Administration > Managae Interactive Dashboard > Select any Dashboard > Right Click on Properties tab > Open Link in New window:
This throws an error saying "javascript:void(null)".
In Siebel Analytisc the above functionality used to work.
Does anyone knows thereason behind this?
Regards,
ApoorvGet Firebug and inspect the element. You'll see that it actually is this:
onclick="javascript:saw.runThis
URL('saw.dll?PortalProperties&_scid=To2OnvCVXpY&PortalPath=/shared/paint/_portal/PoC\x2520FINS&Done=ManagePortals\x2526Done\x253dAdmin');return false" href="javascript:void(null)" FF doesn't even give you the "Open..." options and all IE versions as of 7 show them but actually don't do anything when you invoke them.
Edited by: Christian Berg on Sep 9, 2009 10:36 AM -
Evaluate function not working in obiee 11.1.1.7
Hi all,
I have completed In-place upgrade from obiee 11.1.1.5 to 11.1.1.7.
After this I am getting an error while running reports,which is created by using evaluate function.
[nQSError: 43113] Message returned from OBIS. EVALUATE_SUPPORT_LEVEL inside NQSConfig.INI is not set to support EVALUATE
In my NQSconfig.ini I coundnt find EVALUATE_SUPPORT_LEVEL. So I have added below content in NQSConfig.ini file
# EVALUATE_SUPPORT_LEVEL:
# 1: evaluate is supported for users with manageRepositories permssion
# 2: evaluate is supported for any user.
# other: evaluate is not supported if the value is anything else.
EVALUATE_SUPPORT_LEVEL = 2;
After that I restarted BI services. But still I am facing same error.
Guide me regarding this.
Thanks in advance.Are you using any parameter like % or / , If you are using,Then it is a bug in 11.1.1.7,Check the below URL for more info.
http://obiee-blogs.blogspot.com/2013/04/obiee-11g-bugs-fixed-in-111170.html
bug 13386728 - EVALUATE FORMULA FAILS IF PARAMETERS HAS % OR /
Mark if helps.
Thanks, -
Dashboard Prompts Not Working in OBIEE 10g
Hi People,
I developed a report with two dimension column and a fact column.
NBTY Level 1
NBTY Level 2
Spend Amount
NBTY Level 1 and 2 are from dimension and Spend Amount is a fact column. Both are joined in star schema. The results are correct.
So now i published the same report in a new dashboard, and created a new dashboard prompt on Dimension column "NBTY Level 1". I applied filter on the same column (Is Prompted) in report.But when i gave a value in Dashboard Prompt, the report is not changing. I cannot even find any trace of error displayed. When the prompt is selected and clicked on 'GO' button there is no moment in browser, it stays still. I have also permissions and everything is fine
Can some one please help in finding the problem, its an urgent issue, what possibly could go wrong?Thank You for your reply.
Yes the prompt column is from same subject area.
I Created a Column Prompt in the report using the same column and it worked for that report. But when i used that prompt in dashboard its not applying.
I will share a logical query for Report but How should i fing logical query for a prompt?
The total behavior looks very strange. -
PO Item Customization not working properly
Hello Experts,
I have developed a custom flow where A Particular type of PO will have subsequent STO at it's each line item. And once the PO quantity/deletion flag/delivery date/ batch of each PO line item is updated, its subsequent STO should also be updated.
Current Flow is like this,
We have custom tab at PO line item where user fills some details and press save in ME21N, then subsequent STO is created, and STO number is updated in the same custom tab. I have done this part and implemented my logic in the BADI ME_PROCESS_PO_CUST under method IF_EX_ME_PROCESS_PO_CUST~CLOSE.
I am facing the problem while updating the STO for changes happened in PO as mentioned above. I have developed the STO updating logic under method IF_EX_ME_PROCESS_PO_CUST~POST using BAPI_PO_CHANGE, But when i change PO quantity and check the subsequent STO updating, a dump occurs from standard program as below.
Termination occurred in the ABAP program "CL_HANDLE_MANAGER_MM==========CP" -
in "GET".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 13
of the (Include) program "CL_HANDLE_MANAGER_MM==========CM005".
2 METHOD get.
3
4 IF my_manager is initial.
5 CALL METHOD get_manager.
6 ENDIF.
7
8 CALL METHOD my_manager->search EXPORTING im_id = im_id
9 IMPORTING ex_handle = ex_handle
10 EXCEPTIONS failure = 01.
11
12 IF sy-subrc ne 0.
>>>>> RAISE failure.
14 ENDIF.
15
16 ENDMETHOD.
When i comment out this STO updating logic (BAPI_PO_CHANGE & BAPI_TRANSACTION_COMMIT) the porgram works fine. I also tried implementing the same code in user exit EXIT_SAPMM06E_013. Here also it throws the same dump.
But when I develop the same logic in method IF_EX_ME_PROCESS_PO_CUST~CLOSE, no dump occurs. But here the main problem is that this method gets invoked when user enter the PO through ME22N/ME23N for the first time. It does not get triggered at the time when PO changes are saved.So no STO updating happens there.
Could you please let me know if there is any method where I can develop my logic to update STO at the time of PO save.
Thanks & Regards,
Nirmal Deep SinghI thought the Bookmarks Toolbar always took the bottom position, but I haven't installed many extensions that create toolbars, so perhaps it's not a strict rule.
Toolbar layout is stored in an XML-format file named localstore.rdf. It is a temperamental file that sometimes becomes corrupted and is tricky to edit. However, editing or deleting the file is far less disruptive than a full reset so, for future reference, you can find it here:
Open your current Firefox settings (AKA Firefox profile) folder using
Help > Troubleshooting Information > "Show Folder" button
Leaving that window open, switch back to Firefox and Exit
Then pause while Firefox finishes its cleanup before editing/deleting localstore.rdf (use a plain text editor to view/edit)
Maybe you are looking for
-
Excise Duty Base Amount not flowing into ARE -1
Dear Friends, While Iam creating ARE-1 for the Exports Excise Invoice - Excise Duty Base Amount not flowing into ARE1 thanks Sasi
-
How to load a config file at appliaction startup
Hi Is there a way to load a config file at application startup? I have the DB conection info in a config file. Right now m accessing that info by loading it using a classloader n then parsing it. When ever i access the DB this file is loaded n parsed
-
MacBook Pro will not detect HDD?
Hi, I own a MacBook Pro 15-inch 2.8GHz Core 2 Duo. In the middle of my work, my computer had frozen, so I shut it off and tried restarting, and even reset the PRAM. However, I got the "cancel" icon instead. After a few more tries, it turned into a fo
-
As I start up firefox, I'm prompted to update but it fails saying that it cannot update and that I should make sure that there is not more than one version of firefox running
-
Hi everyone, What is the purpose of Process code In Outbound IDoc I am Using Process code SD10 for outbound IDoc. and as per my Knowledge we use process code for Inbound IDoc only Please clarify my Doubts