Excise Duty Base Amount not flowing into ARE -1

Dear Friends,
While Iam creating ARE-1 for the Exports Excise Invoice - Excise Duty Base Amount not flowing into ARE1
thanks
Sasi

Dear Lakshmipathi,
Earlier Liable to AT1 is ticked but not Indicator NCCD,I have checked after ticking the NCCD as well....
In my pricing procedure i dont have the NCCD condition .....as its not required.
In classify consditiontypes: I have maintained PR00 condition type as well along with Excise condition types...Do i need to maintain this PR00 anywhere else
or
Is there anything I need to do with the assesable value.......if so how should be the entry like in the pricing procedure?
Can someone please provide me the solution...its very urgent
Thanks
Sasi

Similar Messages

Excise Duty Base Amount in J1IEX in case of Import Purchasing

While posting Excise Invoice in case of Import Purchasing, duty values are coming from CVD, ACD, CVD Ecess & CVD SEcess. But I am not able to understand from where "Excise Duty Base Amount" is coming in J1IEX.
Can anyone throw light on this?
Thanks in advance

This is known that CVD, ACD, CVD Ecess & CVD SEcess are coming from PO u2013 MIRO and Excise default (in SPRO).
But my question is from where u201CExcise Duty Base Amountu201D is coming as it is neither maintained in PO nor in MIRO.
Can anyone help?
Thanks in advance

Excise Duty Base Amount J_1IEXCDTL

Hi All,
After Creation of Excise Invoice the Field " Excise Duty Base Amount " is not getting updated , can any one give some idea on this
Thanks In advance
Siva

Hi,
Kindly ensure that in your SD Pricing procedure the condition type which
has the Assesable value has been defined with Condition category 'H'
through the transaction V/06, it is also expected to be non statistical
in your pricing procedure. If it is statistical then refer the SAP
note 1003634 which has the user exit J_1I7_USEREXIT_CALC_EXC_BASE. This
user exit has the KON strcuture of your billing, you can derevive the
base value and pass it to the parameter EXCITM_BASE so that the excise
base can be updated during billing. This has to implemented through
SE37 transaction.
Please note that the old documents can not be resolved with the above
solution, you will have to write your own ABAP code and update the base
price in the table J_1iexcdtl for the excise invoice created when you
transfer the goods from factory.
Regards,
Murali

Table J_1IEXCDTL - EXBAS isnt updated -Excise Base Amt not flowing to ARE1

Dear Friends,
This is in continuation to the earlier post.......Excise Duty Base Amount is not flowing into ARE1...Iam here briefing up the earlier post details:
When I am creating ARE-1 for the Exports Excise Invoice, Excise Duty Base Amount is not flowing into ARE1 but BED and other cess conditions are flowing into ARE1
Liable to AT1 and Indicator NCCD is checked and in my pricing procedure NCCD condition is not maintained as its not required.
The latest patch updated in my system is SAPKH600011 (Logistics and Accounting).....
Most importantly the Excise base amount field is not seen in the Excise Invoice but in ARE1 this field is in display mode and Excise base value is not flowing into the Table J_1IEXCDTL field EXBAS.
Someone Pl help me on this issue.
Thanks
Sasi
Edited by: j sasi on Jul 9, 2008 7:13 AM

Sasi,
I think you are making a mistake between manual and mandatory. IN the pricing procedure MAN stands for manual condition and mdt stands for mandatory. Now in the standard, the PR00 is an automatic entry and JASS is a manual and a statistical condition. It is not mandatory. PR00 being the base value for calculation of gross price/nett price it is mandatory.
Most of the customers prefer a manual pricing procedure where PR00, discount, surcharge everything is manual.
In such a case change the appropriate condition type to the manual condition with manual has priority in the settings for condition type.
But here you need to enter the prices and all the conditions manually.
Here you should have only one condition type for pricing condition with the category as basic price. PR00 is normally that condition and so is the P101 which is a Price ( STO). Now if there are several select all others to statistical and only PR00 with an account key assignment to ERL.
Ensure that JASS the assesable value as statistical and manual.
If however you want the JASS as the excise base amount then PR00 will be used for calculation of discounts and and NETT price only but JASS will be the one for Excise base amount.
BAsed on this excise base amount which you will find in the table J_1IEXCHDR the values for BED, ECS and SECS gets calculated.
Either way is O.K but one word of caution. There is an assessable value in the J1ID transaction where you maintain the Assessable value for materials. Its mostly used in TAXINJ. DO not use it or even if that field is filled ensure that you give the JASS assessable value manually at the time of calculating SAles ordr pricing.
If you don;t then there will be an error.
Also check in the analysis whch condition basis value is being taken for calculated in your excise conditions.
This should solve your problem.
Remember calculating assessable value is not a small thing but customers prefer it because reversing excise or paying additional excise is a pain for them. If thats the case then so be it.
But ensure that assessable value is calculated nett of discounts and given there.
In one case I came across where otehr charges, finance charges and transportation were added to the basic price and only on the total excise duty was added and discount was given after calculation of excise duty. Please check your scenario in line with your requirement. Any questions. My pleasure to reply.
regards
Jude

Excise base amount not upadting in J_1IEXCDTL

Hi,
For some excise document line items Excise base amount is not flowing in J_1IEXCDTL. We are making excise document with reference to Proforma Invoice, in Proforma invoce all the line items are having value and even i checked for these line items in J1ID-Material Assassable Value also exist for that plant on that date.
For few line items the Excise base amount is flowing and for few line items it is not flowing.
We are using SAP 5.0, so pls let me know how to solve this problem?
Thanks & Regards,
Srikanth.P

Answered in this link Re: Excise base amount not updated after creating Excise Invoice,Hope it solves issue.

Excise Base amount not updated in J_1iexcdtl table -reg

Dear Gurus,
We have used SAP Ecc 5.0 Patch level 21. In patch level 20, SAP admit without delivery , can do commercial billing and excise billing in foreground. After batch update SAP not support excise invoice creation in foreground. It support only background. We have 2 senario. 1 is capex sales . ie. without material stock we have raise the comm.billing and excise billing. 2 is supplimentary billing. both the senario now getting effected because of no delivery. Asper SAP advise we have setting for background process excise invoice creation. Excise invoice created. but excise base amount not updated in j_1iexcdtl table. Using J_1I7_USEREXIT_CALC_EXC_BASE user exit we are trying to update the same. For single material it works fine. But more than one material for the first material's base amount is updated in all materials. for your reference i have mentioned the codding . SAP advise it is possible to update excise base amount. But not possible to do. pl.adivse if any correct or guide to solve it.
FUNCTION J_1I7_USEREXIT_CALC_EXC_BASE.
""Local Interface:
*" IMPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*"     VALUE(POSNR) TYPE VBRP-POSNR
*" EXPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" TABLES
*"      KONV STRUCTURE KONV
*{   INSERT         RDSK925285                                        1
TABLES : KONV.
data :   W_INDEX LIKE SY-TABIX.
DATA :ITAB LIKE TABLE OF KONV WITH HEADER LINE.
DATA :ITAB1 LIKE TABLE OF KOmV WITH HEADER LINE.
ITAB1[] = KONV[].
DATA : BEGIN OF I_TAB OCCURS 0,
       KAWRT LIKE KONV-KAWRT,
       POSNR LIKE VBRP-POSNR,
       END OF I_TAB.
LOOP AT ITAB1.
READ TABLE ITAB1 WITH KEY KSCHL = 'JMOD' KPOSN = ITAB1-KPOSN.
IF SY-SUBRC EQ 0.
    EXCITM_BASE = ITAB1-KAWRT.
    POSNR = ITAB1-KPOSN.
ENDIF.
ENDLOOP.
*}   INSERT
ENDFUNCTION.
Thanks & Regards
R.Udayakumar

solved with the same user exit

Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

Hi,
We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
We are configuring for the MM-SUS Scenario.
Now,to accomodate the Tax / Pricing we have installed the add on
component LOCINSUS and we are having doubts on how to use it:
1) Tax and pricing information are not flowing into IDOC- orders02
(e1edp04 and e1edp05 segments are not present in the created IDOC). The
condition print indicator in checked on ECC System and we have also
implemented SAP note 995986.
2)In create ASN transaction , we are not able to see the Excise Invoice
Number and Date field in Basic data tab as expected from SAP Library
document although we have installed the Localization Add on component.
Please help us to reso1ve these issues,
Regards,
Mani
099890-22217.

Mani,
Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
If you did resolve this issue could you please let us know how, much appreciated.
Bill.

Customer receipts and payments are not flowing into PS module

Dear Team,
I am new to the PS module..... Customer receipts and payments are not flowing into PS module. Kindly let me know the missing configuration steps.
Thanks !!!

Sagar Kapadia wrote:
> 1) What is the pre-requisite configuration for activation of Commitments and Project Cash management in the PS system?
> 2) Is there any word of caution which needs to be kept in mind at the time of activation?
> 3) once activated, what will the impact on the data? Are there any chances of data inconsistency?
>
Only one pre-requisite is the creation of FM area.
As I suggested earlier, please read SAP help which will answer all your queries.
Please follow the below path...
SAP Help Portal >>> SAP ERP Central Component >>> Financials >>> Project System >>> Payments >>> Project Cash Management.

Material delta changes are not flowing into CRM

Dear All,
material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
Do I need to create the new product hierarchy also in CRM manually?
Appreciate any inputs
Raj

Hi Raj,
Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
Then go to SMW01 and reprosess the struck Bdoc.
Reward points if helps,
Regards,
Paul Kondaveeti

Billing document are not flowing into FI and COPA

Hello SAP CO gurus,
please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
what are the settings need to check?
is there any option to get release by manual?
Initiatives rewards with points........
Regards
Chandra.

Hello Chandra,
Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
I am also working on the same issue but not solved yet.
regards
Nivas

Revenue values are not flowing into COPA

Dear Experts,
We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
May I know the exact reasonu2026.
Please suggest me in right wayu2026.
Regards,
Balaji Bhonsle.

Hi Balaji bhau
I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
See if the Billing Type has been entered in KE4W and the VF reset for it
Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
br, Ajay M

J_1IRG23D Excise Duty Base Value is not Updated

Hi all,
while doing the Depot sales after Depot Excise Invoice J1IJ the Excise Duty Base Value is not updated in J1iDEPOTSTOCK1 (display depot stock) and also in table J_1IRG23D.

hi
check this SAP Notes
1348970 Incorrect Ship to / Sold to party filled in J1IJ 11.06.2009
1322071 RG23D entry deleted from J_1IRG23D in case of cancellations 16.04.2009
1233836 Additional depot EI status set as 'C' for partial reference 20.03.2009
1263061 J1IJ - material quantity conversion leads to rounding error

Check box Calculate Excise Duty base on rates in J1IEX

Hi,
In J1IEX Duty rates tab, there is one check box as Calculate excise duty base on duty rates , but thta check box is Disable i How to make it as enable so that we can click to to recalculate the excise rate,
also my problem is that in case of import PO, the basic price in our PO is diffrent compare to basic price of custom . because custom is addding the basic frieght and insurance charges in Basic price, so while Doing J1IEX ref. to MIRO number it is taking properly amount of all excise duties but excise base amount is diffrent and when we correct the excise base amount as per custom Bill of entry all excise amount are change and it is not coming as per duty rates which are present i Duty rates tab so I want to recalculate it.
regards,
zafar

Hi,
Can you help on this issue.
regards,
zafar

BED and SECess not flowing in ARE-3

Hai Gurus,
BED & SECess percentage and values are not flowing in ARE-3 .....
For Export and Deemed export same pricing procedure.
1.In Export Invoice all values are flowing same way ARE-1 also same values are appering why not ARE-3
2.Condition record 357 already is there.
3.J_1IEXCDTL table is updating after excise invoice with BED ,ECess & SHEces percentage with amount.
4.Note already applied userexit J_1I7_USEREXIT_DUTY_IN_EXPORT
5.Default condition types are there in JINFAC
6.Upto excise invoice all values are coming when I raise the ARE-3 that time only BED,ECess perecentage and value not flowing.(Excise base value is coming in ARE-3).......
Anything missed........please give any solution...........
Thanks
Sree

Check-
- whether you maintained Cond category - H ( capital H only) in your price cond type.
- J_1IEXCDTL for Excise Base amount flowing are not?
as per your thread, you have done req'd settings.
try with the above n revert

CVD & ADC not flowing into MIGO.

Hai all,
For the Import purchasing, i did the MIRO to capture the customs & CVD values. But while doing GR, CVD & ADC values are not flowing into MIGO ( it should be shown in BED & AED ) respectively. I have maintained this condition types JCV1 & JADC in Excise default settings also. Is there any notes are available for this error?. Please throw your lights

Hi,
Please check J1ID, whether we have maintained material and chapter id combination and cenvat determination. Secondly check the MIRO no. you are entering while doing MIGO. Sometimes it happen, that the miro number entered during MIGO different that of actual MIRO.
Ishu

Excise Duty Base Amount not flowing into ARE -1

Similar Messages

Maybe you are looking for