Skype not working at all for Mac and iPhone

Hi! I'm running Skype ver.7.10 (777) on OSX Yosemite (10.10.3) on my MacBook Pro. I'm also running Skype ver.5.14.72 on my iPhone 5s on iOS 8.4. I've been having problems with Skype for Mac for the past week. It started with lagging messages in Group Chats (We have around 23 people in there, though usually only half would be online at the same time). It would take anywhere from 2 to 15 minutes to send a single word. Later, I would receive messages 30 minutes after it was sent from friends. Now, I can neither send or receive messages on Skype for Mac. Also, I would be able to chat with my contacts in private one on one chats, but when I tried to uninstall and reinstall the application, I could no longer chat with them and they would appear offline to me, even though I can confirm through webversion of Skype that they are indeed online.  As for Skype for iPhone, I noticed I stopped receiving messages late yesterday, but I only got the chance to check it out now. I can no longer send or receive messages from my groups or people I've chatted with on Skype for Mac. In short, my Skype for iPhone now has the same problem for Skype for Mac.  So far, I've only tried uninstalling, restarting my MacBook and reinstalling Skype. Same goes for my iPhone; uninstall, restart, reinstall. Really need help here since I have an important Skype conference call scheduled in a few hours. I'm not sure if webversion of Skype supports conference calls...? I hope this issue will be resolved soon though for now, any help will be appreciated. 

I've been having a similar issue that began at approximately 7:00 pm EST last night - really hoping there's a solution soon! I've begun to receive messages from a group chat I'm in, but they're still few and far between.

Similar Messages

  • Palm Desktop replacement for Mac and iPhone?

    Since Palm Desktop is no longer in active development, is there a Palm Desktop replacement for Mac and iPhone?
    http://kb.palm.com/wps/portal/kb/common/article/33219_en.html#mac
    I mean, a single application (not a bunch of them like Address Book, iCal etc) that works on Mac (desktop) and that can sync with the iPhone. Including all data from the current Palm Desktop:
    1. Address List
    2. To Do List
    3. Memo List
    4. Date Book
    Thanks.

    If only Apple did something like that (all-in-one-application personal organizer with contacts, memos, calendar, to do lists, etc)
    Well, they offer all those functions--Mail has Notes and To-dos show up in both Mail and iCal, plus Address Book. Clearly someone made the fundamental decision that separate integrated programs were better than an all-in-one, so I wouldn't expect an all-in-one from Apple in any foreseeable future. But you can send a feature request, if you like:
    http://apple.com/feedback
    What would be interesting---and may exist, I haven't looked---would be if a third-party used the open access to iCal/Address Book info to build an all-in-one that integrated with Apple's separate apps, which could provide seamless iPhone/OS X integration while still letting people have the unified interface. Postbox uses Address Book but I didn't see any calendar/notes features in my quick check. Lots of apps build better replacements for Apple's individual programs--BusyCal, I think a Mail replacement, etc---but nothing unified that I've heard of.
    However, my point was that you may be better off grabbing Entourage 2008 while it is still available than waiting for Outlook 2011, which is going to be a different program. Sometimes features go backwards, and Missing Sync compatibility may change or be delayed with Outlook 2011. I don't see the advantage of hanging onto PD until the very last minute.
    ETA re the tech guarantee:
    http://www.microsoft.com/mac/products/Office2008/office-2011-upgrade.mspx
    Message was edited by: Daiya

  • Why is photostream not working together with my macbook and iphone?

    Photostream is not working togther with my macbook and iphone. How can I sync it?

    Has it ever worked?
    If you recently turned on photo stream on the mac and iphone, then (on the iphone) only new photos are included in photo stream, old ones are not.
    But syncing to your mac (if the photos originate from the iphone) is critical.  That's how you store photos (they can easily disappear on the iphone due to many "issues" that can occur, and relying on an icloud backup is not safe - to many users have lost some/all their photos when doing a restore.
    So be sure to begin by doing a sync to the mac using itunes/iphoto with a USB cable. 

  • Hi. Dear users. What about Web Browsers for Mac and IPhone 4S devices

    Hi. Dear users. What about Web Browsers for Mac and IPhone 4S devices?
    Test Labs: THG and something else.
    Thanks for responses and future responses.
    Big Thanks.

    "What about?" Both come with Safari as a Web Browser.
    Can you be a little more specific as to the information you are requesting?

  • Handsoff not working between Ipad air 2 and Iphone 5.

    I have Macbook pro retina 2013 , iphone 5 and Ipad air 2 all running latest OS. The handsoff feature between my Mac and Iphone is working perfectly but for some reason handsoff between my ipad and iphone or Mac not working at all. I have turned on handsoff feature in my ipad and bluetooth is also on. All devices is logged in with the same icloud account. Is anyboady having the same problem, is there any work around with this. Please let me know If anybody knows about it. Thanks.

    I store things like PDFs in a DropBox account. They're then accessible from pretty much any device. On my iPad, I use PDF Expert for viewing and editing PDFs.

  • Best air print photo printer for mac and iPhone

    looking to purchase a new all in one photo printer for both mac and iphone, any recomendations

    If you want a really good fast printer I recommend the Office jet Pro 8600

  • PhotomergeUI.plugin is not working in CS6 for Mac

    I am using Photosho CS6 on a Mac. I urgently need the PhotomergeUI.plugin to be working. It was working in Photoshop CS5 after conversion to a 32-bit version. CS6 for Mac is only provided as a 64-bit version. Is there any way to make the plugin work for me? Many thanks!! Simone

    No, unfortunately the photomerge ui plugin will not work in photoshop cs6 on the mac side.
    You can always use photoshop cs5 for those times when you really need it.
    In photoshop cs6 you could align your photos manually as best you can, then select all the layers and go to Edit>Auto-Blend Layers>Panorama with Seamless Tones and Colors checked

  • "new line" in dictation not working in Outllook for Mac 14.2.4

    Today I tried using dictation and it works except when I give it the commands "new line".
    Again, the dictation is working in all Apple applications.

    Killbygirl,
    I am going to do what I can to help resolve your issue in a timely manner, and what is most easiest for you. Ok lets get started!
    First ensure that you have all software updates installed. You can do this by following the instructions provided here
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh292.html
    Once you have verified that all updates are installed open system preferences, locate Sound which is located in the hardware category. Once located click on Sound and the Sound preference will open. On the top you will see three tabs. Sound Effects, Output, Input. Click on the input tab and in the "Choose a device for sound input" box click on Line in. Also verify that the settings in any audio recording applications that you are using are setup correctly.
    If you have any questions, comments, or concerns please don't hesitate to let me know and I would be happy to be of assistance!

  • CS3 Free Transform Tool does not work at all for distortion

    I tried everything, worked with vector objects of different configurations and rasterized objects. Nothing works. When I press Free Transform Tool and go to bounding box corner it become rotate or resize tool. When I click a little bit inside the bounding box and hold Command Key (I tried many keys and without keys) it just moves the whole object, it did not select just one point that I need. Envelope Mesh does not work for the same reason, but I do not need mesh tool. I have Illustrator 13.02, Mac OS 10.4.11
    The Free Transform Tool functions exactly as the main selection tool. Please help.

    I STILL cannot get this to work. I have tried everything suggested in this thread. I have followed the directions in the help menus explicitly. I have tried grouping, ungrouping. I have tried it on type, on type changed to outlines, on simple rectangles. Without success.
    When I try to use the free transform tool and hover over a corner of the bounding box, I get either a double-headed corner arrow, a rotation arrow, or a move arrow. Using the first two, dragging the point and then holding down the control/command key results only in a scaling of the object.
    Should I restart? Should I re-install? What should I do?
    Best,
    Fielden

  • Stock Quote Query still not working in Excel for Mac 2011

    I've been following this thread and like many others, stock quotes in Excel for Macintosh 2011 stopped working for me shortly before Christmas.  While I've noticed that it will work on my work computer which is running windows 7, I can not get it
    to work at home on my mac, even when I use the same .iqy file as on the pc.  I am at my wits end.  Can you offer any help?

    Hi,We support Office for Windows in the current forum, since this question is about Office for Mac, I suggest you post the question in Office for Mac forum:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
    Thanks for your understanding.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • SSO Configuration not working - Still asking for Userid and password

    Hi Guys,
    I have configured Portal to use with backend server. Configured WAS & ITS and created System Alias.
    For Testing SSO I did following steps on portal:
    System Administration > Support > SAP Appliction > SAP Transaction
    Selected system Alias and tcode se12. Selected SAPGUI for HTML. Pressed Go.
    Instead of SE12 screen, I get Logon Screen asking for USERID and password.
    I should be getting SE12 screen directly without entering USERID and PASSWORD.
    I tested with Transaction iView (SE12)  and getting the same logon screen. After entering userid/password  it displays SAP Easy Access menu instead of displaying SE12
    Please help.
    Thanks a lot.
    mini

    Hi Sandeep.
    Thanks for your reply. Here are the answers to your questions:
    1. Is the username same in the portal and the backend that you are trying to connect, ensure that there is the same username that exists in the system you want to connect to. YES
    2. The ticket is imported properly- check the ACL and Certificate list in Tcode STRUSTSSO2.
    Ticket is valid from 01 Jan 2009 to 14 Mar 2012.
    3. Check for the parameters in place login_accept_ticket = 1 and login_create_ticket = 2 and icm_hostname_full is set to FQDN. 
    In RZ10 it has 3 parameters:
    login/accept_sso2_ticket = 1
    login/create_sso2_ticket = 2
    icm/host_name_full = sapecc6.tri.com 
    4. What is the result when you test the system connection?
    WAS & ITS Connections are successful.
    Connection test for Connectors is giving following results:
    Results
    Retrieval of default alias successful
    Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
    My Connectors Details:
    Application Host : sapecc6
    Gateway Host : sapecc6.tri.com
    Gateway Host : 3301
    SAP Client : 800
    SAP Client : EC7
    SAP System Number : 01
    Server Port: 3201
    System Type: SAP_R3
    I am using same userid for Portal and backend.
    5. Are the 2 systems that you want to configure SSO in the same domain?
    I am trying to connect R3 to Portal.
    Please give me directions to fix the problem.

  • Why is java not working at all on macs?

    As of 1-31-2013 Java is not working on macs?  What did apple do that is causing this?

    An XProtect update most likely. Here's an example thread w/unofficial workarounds.

  • Notes not mirroring in Mail on Mac and iPhone

    Hi,
    I've had a problem with accessing/viewing/syncing Notes created on my iPhone, both viewing and syncing on my mac in Mail.
    Every time I click on a note in Mail on my mac, I get a 'loading' graphic and spinning ball, but no note appears. Ever. Not all the notes on my iPhone are in Mail on my mac either, 6 notes on my Phone, 4 show on my Mail. They are now set to sync through MobileMe, having synced manually before (again, unsuccessfully) through iTunes.
    I presently cannot create any new Notes in Mail either. To Do's, yes. Notes, no.
    I don't have my me.com email account set up through my mac Mail - is this contributing to the problem? I've read that true syncing can only be achieved via an IMAP account, but I though MobileMe handled that anyway. I only have my Hotmail POP account coming through Mail on the mac at present. I have today tried to create an account for my me.com account on Mail on my mac, but after 5 minutes of trying to contact the server, it refused to confirm and verify my password for some reason. This is happening every time. I can access my MobileMe account no problem via the internet, so no problem with the account name, password, etc.
    Could anyone please shed some light on where things are going wrong?
    Thanks.

    UPDATE:
    Phoned Apple helpline, went through creating new prefs, etc. Still didn't work.
    Passed onto specialist, by process of elimination, found that certain fonts were needed - Suitcase overwriting FontBook prefs, so MarkerFelt font not being switched on. Notes are now working!!!!

  • Library management software for Mac and iPhone

    Hi all,
    This is not a support question, but I thought someone here might have an idea for me. Googling around hasn't helped much with a question I have. I have a lot of books, and would like to have software to manage them that runs on both my Mac and my iPhone, and syncs well between the two. Has anyone had good luck with anything along those lines?

    I found a couple by searching the iTunes library for "Library management", but nothing that does exactly what you want. You may want to look into a general database app such as HanDBase, which is not specifically for books, but has a lot of available pre-defined databases, can do barcode scanning, and has a desktop version that it can sync with. I've been using it going back to my Palm Pilot days.

  • ITunes invoice management sofware for mac and iPhone

    hy all
    I'm looking for a management software for mac/iphone. I would like to save my iTunes invoices somehow. I can't print my iTunes invoices, I would like to organize them. I need some kind of app or something for management. Can anybody help me? I'm looking for my problem for a while...and I can't belive I'm the only one in this world who want to organize the iTunes Invoices.
    Regards
    (sorry for my english, not perfect)

    What do you mean by "manage" them? Manage them how? The receipts are just email messages which can be saved out to a text file and from there they are just normal documents. You're going to need to be more explict as to what you wish to accomplish with this "management" before anyone will be able to offer much in the way of useful suggestions.
    Regards.

Maybe you are looking for

  • How to efficiently get hold of N randomly selected keys out of X?

    I am writing some benchmark programs for Coherence caches and would need a way to as efficently as possible get hold of a "fairly random" selection of N keys from the cache out of the total X keys (where X >> N). With "fairly random" I am in particul

  • Premiere Elements 11 Does Not Launch

    Hello - I've recently installed Premier Elements 11 on Windows 7 (64 bit). I'm having a very similar problem to what the user in http://forums.adobe.com/message/5499536 has been going through. When going to Video Editor->New Project the app simply fa

  • Controlling which node OWB connects to in  a RAC environment

    We have OWB (10g R2) deployed on a two node RAC (10gR2) database (DB name ZIAP, instances = ZIAP1 ZIAP2). We would like to have client session and OWB sessions connect to instance ZIP1 consistently when we connect to ZIAP. We have changed the tnsname

  • Finding largest files

    Hi Guys, I have a situation where i  have multiple home drives on a share. i want to list their largest (size) files with their parent folder names (this usually is their username), so i know which user is consuming more space and also it would be go

  • Alpha blend at RenderTexture

    When I rendering 3D scene to a Texture, I got a incorrect result. I think the reason incorrect blend alpha is because the destination's alpha was ignored  on rendering. For example make new RectangleTexture named A; context3D.setRenderTexture(A); and