Slow initial association with WRT54GS w/WRE54G

I have 2 laptops and both are having problems with initial association with the WRT54GS and WRE54G.
I had some initial problems with the WRE54G but have fallen back to a default install with no security for troubleshooting.
However even with this default install, both laptops will do the initial attempt to associate with my SID, fail to acquire IP, and then grab an IP about 2 minutes or so after failure.
Does anyone have an idea as to what would cause this and how do I speed up the acquisition of a valid IP?
Thanks,
GimmeFive

I'm new here, too, and looking for solution to exact same problem. Starts at 54 mbps and then very quickly drops down to 11 then 2 then 1! I've done no updates or changes since buying it. I have V7.2. My very old D-Link 524 worked better than this! Sure hope someone has a solution. Keep in mind that I don't know what all the special language is, and since I work 60 hrs per week at 3 businesses, don't have time for much more than I'm doing. So hope you explain VERY clearly what needs to be done if you have a solution. Thanks so much for any help to any of us... : )

Similar Messages

Unable to achieve association with wrt54g

I recently purchased this unit, and initially had a strong signal strength throughout my house on the first day of use. The following day, I was unable to receive a signal with an occasional "weak signal" despite placing the computer next to the router. I am using a d-link USB adapter. Any thoughts on troubleshooting this problem?

Get one computer connected to ethernet port 1 on teh router..open IE and go to http://192.168.1.1 and logon to the router web ui by keeping the username blank and the default password as "admin"....after getting into the router , go to "wireless" tab...the ssid should not be linksys, channel to 11 .. click on "advanced wireless settings" , change the beacon interval - 50 , fragmentation threshold - 2304 and RTS -- 2304....

Slow wired connection with WRT54G

My ISP is Comcast.
I'm using their modem which includes my digital voice connection. From there I'm wired straight to the WRT54G and from there I'm wired to my PC. However, when I connect from the Comcast modem to my PC I get download speeds of 12mbps and when I connect from the WRT54G (wired) it drops to 1mbps or even 786kbps.
I've tried resetting the modem and the router. I've tried changing the MTU. I have the latest firmware version (v8.0.2). The last resort is getting a new cable modem (suggested in the forums) but I think that's out of the question since my digital voice is connected to the Comcast modem.
Any other suggestions? Thanks in advance!

Please state the make and exact model number of your modem (not the WRT54G).
Using an ethernet cable, wire your computer directly to the modem (not the WRT54G). Verify that you have a properly working Internet connection. Then do the following:
Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key. Copy all the results to your next post, except that if your "IP address" does not start with 192, then post only the first 3 digits of your "IP address" along with the rest of the info.

Slow system – problem with OS, software, memory, hard drive?

I am running a MacBookPro5,3 (Intel Core 2 Duo – 2.8 GHz, Memory = 2 x 4 GB, Hard drive = NVidia 500 GB - 100GB of which is free space), using Mac OS X 10.6.3.
I was running 10.6.6. Then attempted a software update to 10.6.7 and the system essentially stopped working, Was able to back up data using target disk mode, and then reinstalled 10.6.3 using a purchased snow leopard DVD (had lost the disk that came with the computer). Worked for a while but have been having issues with increasingly long and frequent system slow downs (spinning beach ball). Recently attempted another system update, and the update failed and wasn't able to do anything. Used the 10.6.3 dvd and did a disk utility check – it initially said there was a problem with the hard drive – but on another restart from the DVD this issue disappeared (but still no working OS). Attempted connection of my computer to another laptop using target disk mode – this failed to show the target hard drive and only showed the dvd which was in the computer booted up in target disk mode.
At this point rebooted using the DVD and was able again to install system 10.6.3. However, there are still occasions of sporadic slow-downs associated with specific applications (spinning beach ball for anywhere from 5 – 120 sec). Ran disk utility from the DVD again – states that the permissions and the hard drive is OK. Also, ran a memory test (using Rember) which stated that everything was fine (although the test took nearly 2 hours to run and was punctuated by much spinning beach ball activity).
At this stage i am not sure whether I have a problem with memory, the hard drive, the OS or the software. Clearly something is not right – are there any other options to test my system (since I don't have the original dvd – I haven't been able to run a system hardware test) - other third party options?
Thanks in advance for any advice, and apologies for long post.
Rob

Sounds like a failing hard drive or SATA controller. It's not clear whether you have a backup of your data. If not, you should remove the hard drive from the machine and install it an external enclosure or dock, then back it up using another Mac. Then take the unit to an authorized service outlet for testing.

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

Slow email send/receive for user associated with beehiveonline

It takes hours to send/receive an email to/from the user associated with my beehiveonline workspace. Also, the number of emails that we receive has decreased, it may be not related at all, but there is no way for me to check if that's just due to low customer activity or to timeouts.

Hi,
If you have issues then let us know the date/time of the issue and the degree of delay you are seeeing and we can check if there may be a reason for the delay.
Phil

Have multiple devices associated with one Apple ID: iPod Touch and Ipad Mini stopped sending/receiving iMessages and FaceTime all of a sudden

This is the listing of what we have:
Ipod Touch 4th Gen for daughter
Ipod Touch 5th Gen for another daughter
Ipad 3
Ipad Mini
Iphone 4S
Iphone 4S
For sharing/downloading convenience, all of these are linked to one apple ID. iMessage and FaceTime were working flowlessly when we set it up. Yes, there was a problem initially where some devices were receiving someone else's texts, but they were resolved when I went to Settings and chose a specific # or email address for each DEVICE (so there's no overlapping)
All of a sudden, my daughter's Ipod Touch 4th Gen started having problems sending messges. Sending bar will go up to the end then stop right before it gets completely full--end result, message not delivered. I tried to facetime her, but nothing happens. Sometimes when I try facetiming ipod touch 4th, I'd get an error message '____ is not available for FaceTime'
I've confirmed the email address associated with ipod Touch 4 has been added and verified under my apple ID. I've tried restoring the iPod in iTunes, hard resetting the unit, turning off and on iMessage/FaceTime... and still doesn't work.
All our software is up to date. By the time I started thinking maybe ipod touch 4th gen is getting old, my husband's newly bought ipad MINI started having the same problem.
This is really frustrating---help?

We're screwwwwwed! Not THAT familiar to apple, just barely plugging along and dove in with two ipads and two ipod touches. Previous experience was just two ipods (160 GB) that I had to still rotate audio books out of every few months... well, for me. My wife doesn't use hers as much. ANYWAY, I lost a zillion things with the ipod classic since it didn't have a back-up option and many of the CDs I scrounged up when it first came out were already lucky to have survived college. 8 years later and the computer that had the original files had been replaced umpteen times. ipods failed and decided to quit being a tight wad. Not sure if these gifts are worth it yet.... well, two of them were.

I am trying to download previous iTunes purchases to my iPad using the cloud. I had a mobile me account and I have another apple id. I keep getting this message "This device is already associated with an Apple ID"

I get this message "If you download past purchases with your Apple ID, you cannot autodownload or download past purchases with a different Apple ID for 90 days.
If I use my MobileMe login I have no purchases, so I am using my regular Apple ID. I used my MobileMe login when setting up iCloud because it wanted an email address.
Please explain.

The same thing happened to me because I had an Apple ID that was not an email address under which I had made all my purchases and a me.com address that I initially used to set up my iCloud account. If you want to get all your purchases from the Cloud, then you need to do a couple of things: first, change the Apple ID that you purchased all your stuff under to be an email address. You can do that yourself by going to the page where you change your Apple ID. I think it's applied.apple.com but if that's not it, just search for "My Apple ID" in the search box on the support page. Sign in with your existing ID -- the one that is not an e-mail address -- and change it to an e-mail address. Be sure to remember this Apple ID. Then create your iCloud account using this Apple ID. You should be able to get all your stuff to download using this account.
The problem with this is now you will NOT have an iCloud account associated with your MobileMe account. If you're OK with that, you're good to go. I think you still have time to manually download all your stuff from MobileMe.
Apple phone support walked me through this, so if my instructions are confusing you can call them and get them to walk you through it too. It's a common problem.

Is there a way to access Time Machine files associated with an old user name?

My iMac was running super slow and there was a bunch of programs, etc. that I wanted to get rid of anyway so I thought I would do a "clean install" from my Snow Leopard disc. I moved items on my desktop to my Seagate external drive and then unplugged it. I have had Time Machine saving to it for a long time so I was confident I could just move a few items (pictures, music, etc.) back on to my hard drive when the install was completed. To my surprise, when I went to Time Machine I found the items I had moved from my desktop but no earlier versions of my other files.
In researching this issue a little bit, it appears that perhaps I created a new user name when I did the install and that my historical items are likely still on the Seagate but stored somewhere associated with my old user name. I understand that if I can change my user name back to the original that I may be able to access the items and transfer the items I want. To compound the situation, I have no idea what my old user name even was.
Does this make sense to Mac experts out there?
If so, is there a way to see the old user names and access the Time Machine files?
I've been avoiding telling my wife that I may have lost all our kid photos so I'm desperately hoping someone can help.

The problem is that Time Machine detects your new OS X copy as a new Mac and it doesn't let you access to your backups. To access to them, see > http://pondini.org/TM/E3.html
Another option would be to access to your backups manually. Open a Finder window, select the Time Machine drive in the sidebar and go to Backups.backupdb > your computer's name > one of the backups > your partition's name, and copy the data you want

How can I remove a file that is no longer associated with a page?

I have a hurdle that is preventing me from completing a task.
I am trying to build a spry asset--specifically a vertical menu. When I initially built the page, I built the menu. However, the look was rejected and I was asked to re-create it. I went back, removed all references to the spry asset, and stripped the menu from the page. But when I open the page which I want to build the menu on again, it is still showing that a .css and .js file are associated, event though they aren't. And when I try to rebuild the asset, it won't add the proper .css and .js file because it thinks the files are already created.See the screenshot below to view what I'm talking about.
If anyone has an idea of how to tell Dreamweaver that those two files are no longer associated with the page, I would appreciate some help. THis is the last major hurdle before I can complete a project.
Thanks,
Ken

Hi
Providing you have removed all references to the js/css files, (have you removed the code at the bottom of the page?), use the spry updater to insert your new js/css.
You can get the spry updater extension form the downloads box here - http://labs.adobe.com/technologies/spry/.
PZ

How do I separate out the unique identities associated with my Apple ID?

How do I separate out the unique identities associated with my Apple ID?
Messages sent from my iPad2 appear on both my iPhone 4s and my kid's iPhone 4s as if my phone, her phone and the ipad2 we are all the same sending device. This only occurs when messaging is initiated from my iPad2.
Conversations I start from the iPad2 show up on my iPhone and her iphone as if she is also the sender, and, if I message her iphone from my iPad she doesn't receive the message. Her device acts as if it is the original sender and logs it as such; messages go unnoticed because her device logs it as a message it sent, not a message recieved- so no message alert. (Ha ha, no, she isn't ignoring me, that is a different story.)
How do I get the system to recognize, and separate the second iphone from messages I send from my iPad2 while keeping her and her device as an authorized user on the same apple ID?
This error only occurs when messaging originates with the iPad2. Any thoughts?
(I worry Mountain Lion will throw all this into a big mess too, messages from my devices showing up on hers and, heaven forbid, vice versa.)

See Here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Music albums no longer have the artist name associated with it

I updated to IOS 5 and In transferrig all my music to the ipad1, some of the albums no longer have the artist name associated with it..So when I search by artist name, it only shows they have one album when it should be two..
Also switching between songs, artist, album is very very painfully slow..seems like the music app hangs sometimes.
Tried many times resyncing and deleting but didn't work..Anybody experiencing these problems??

I have the same problem, and after hours of trying to figure out the problem i finally did!! Its going to be a pain in the BUTT, but its the only way. :/
1. Look for the song file.
2. Right click and choose prefences
3. Go to details and edit the information
- "Title" aka songs name
- "Album artist"
- "Album"
-The rest of the stuff can be filled in if you want
4. Click OK
5. Drag it into itunes
Hope this help. ;D

The vendor account is not associated with the file you are trying to open.Please try again.

Please help me to understand what is the problem with the set up of the program. I bought an ebook from an internet site to which my IP address was blocked (in country 1). My brother bought it on a computer in country 2 and wanted to download and send me the file so I can open it on my computer. He set up initial download without Adobe ID. Afterwards he downloaded the pdf and send it to me. I tried to upload it with my ADE reader but it didn't work without ID. My brother then deleted afterwards his ADE and installed it again, downloaded the ebook again but this time setting up an ID. He transferred me the file ,I used the same ID but then the following message appeared "The vendor account is not associated with the file you are trying to open. Please try again." . Can this be fixed somehow? I cannot open the URLLinks even as there is no connection from my IP , but I have the pdf file ( ebook) but I don't know how to set up the program.

Sorry Everyone this error message appeared in Digital Editions 4 used on a windows 8 laptop. Thanks Chris

Is it possible to get component associated with DefaultListSelectionEvent?

Hallo,
Is it possible to get component associated with DefaultListSelectionEvent, please?
There are multiple tables in my window. All tables (must!) have same TableSelectionListener. Problem is that there's no information about component in default list selection model implementation. When fireing events DefaultListSelectionModel use self as event source (see DefaultListSelectionModel.fireValueChanged fragment below).
e = new ListSelectionEvent(this, firstIndex, lastIndex, isAdjusting);Any ideas how to get component in ListSelectionListener.valueChanged, please? But don't forget that as a programer, i am the lazy. Thus implementing new selection model is not an acceptable solution, but class extension is :p
One idea is to remember models component in constructor and override DefaultListSelectionModel.fireValueChanged like this:
class MyGreatListSelectionModel extends DefaultListSelectionModel {
   protected JComponent boss;
    public MyGreatListSelectionModel(JComponent c) {
        boss = c;
    @Override protected void fireValueChanged(int firstIndex, int lastIndex, boolean isAdjusting)
        Object[] listeners = listenerList.getListenerList();
        ListSelectionEvent e = null;
        for (int i = listeners.length - 2; i >= 0; i -= 2) {
            if (listeners[i] == ListSelectionListener.class) {
                if (e == null) {
                    // Only changed 'this' to 'boss'
                    e = new ListSelectionEvent(boss, firstIndex, lastIndex, isAdjusting);
                ((ListSelectionListener)listeners[i+1]).valueChanged(e);
}This should work, but if there already exists some mechanism, such extension is just slowing app down.

Thanks for your help.
However I could not get the result. I am using following code:
public void myaction(ActionEvent event)
FacesContext context = FacesContext.getCurrentInstance();
UIViewRoot view = context.getViewRoot();
UIComponent UI = view.findComponent("tab");
if(UI == null)
     System.out.println("UI Not Found ");
else
     System.out.println("Get Current FecesContext");
There is an Component having id "tab" is available on JSF page but I am getting "UI not Found" every time. Is there somthing wrong...Please suggest.

Want to know the screens associated with a module pool program ??

Hi,
I have an M type program (module pool), say SAPMF05M. I want to
1) see which transaction code initiated it ??
2) see the screens associated with it ??
how do i achieve this ?? I know just the program name !!
thanks

Go to SE80, make sure "program" is in the object list box, enter the program name in the field underneath the object listbox and hit enter. You will see a bunch of folders in the tree structre. There will be one for screens and one for transactions.
Please remember to award points for helpful answers. Thanks.
Regards,
Rich HEilman

Slow initial association with WRT54GS w/WRE54G

Similar Messages

Maybe you are looking for