(Slow Network): iSight camera not working in iChat since Leopard upgrade

I have a different type of iChat video issue. My Power Mac G4, 867 MHz, 1 GB DRAM is a supported Mac for the Leopard upgrade. I've successfully installed OS 10.5.
Also my Power Mac meets the iChat Conferencing Requirements for 1-on-1 Video Chat per the OS 10.5 system requirements and the application note here:
http://docs.info.apple.com/article.html?artnum=301050
My iSight camera is connected via Firewire to an Apple Cinema Display, which feeds back to the Power Mac G4.
1) When I boot from my 10.3.9 Carbon Copy Cloner backup my iSight works in iChat (at least locally to see myself) without any issue. Green light comes on and shows me locally on video and audio sound bars. Before the OS upgrade the iSight worked fine for live video conferences with iChat 2.1.3 under Mac OS 10.3.9
2) Running OS 10.5 when I go to iChat 4.0's preferences video pane the following message is waiting "This computer does not support video conferencing."
3) With Leopard iChat 4.0 the Connector Doctor under "capabilities" says "(Slow Network)" for 1-on-1 Video Chat and won't even show video locally or turn on the iSight's green light.

Fixed!
My Power Mac Quicksilver G4, 867 MHz. problem with (Slow Network) in the iChat Connection Doctor, no video preview or video iChat since upgrading to OS 10.5 Leopard and iChat 4.0 has been solved with the following posted towards the end of the thread below. I can finally see my video preview with iChat 4.0 and have also video chatted successfully with one other user.
Topic : Macbook - iChat says "This computer does not support video conferencing"
http://discussions.apple.com/thread.jspa?threadID=1197506
Fixed by Apple Article: http://docs.info.apple.com/article.html?artnum=307035
Products affected
Mac OS X 10.5 Leopard
iChat
PowerPC-based Mac with a 867MHz processor
Solution
Quit iChat.
Open Terminal (it's in the Utilities folder, in the Applications folder).
In Terminal type or paste this command on a single line:
defaults write com.apple.iChat newbwdup 300000
Press Return.
Quit Terminal.
Open iChat.

Similar Messages

  • Isight firewire cam not working in iChat on Leopard.

    After installing Leopard on my Powerbook G4 867 dvi, my Isight Firewire Cam is not working anymore
    in Ichat on Leopard.
    Any solutions, it worked fine under Tiger.
    Isight firewire cam works fine wirh Skype, Amsn , Photobooth and Quicktime.

    Alright. I've done quite a bit of testing now.
    My system is (as stated below,) a 12" PowerBook G4, 867 MHz, 640 MB RAM, 40 GB hard drive, Combo drive, AirPort Extreme. It was purchased in Summer 2003, and while the OS has been reloaded, it hasn't been for a long time, and at present, the OS was an install of Jaguar that was upgraded to Panther to Tigard, finally to Leopard.
    I was experiencing the issue mentioned. In my case, I use a FireWire miniDV camcorder for video in iChat. It has worked fine in the iChat AV beta in Jaguar, and iChat AV in Panther and Tiger.
    Upon upgrading to Leopard, I get the "Slow Network" explanation for why I cannot use video (or hosting multiperson audio, or screen sharing.)
    My research shows the following:
    This occurs both on the upgraded install, and a fresh install. (To an external hard drive.)
    Using Ecamm's PowerBoost allows me to use every option that isn't barred outright by lack of hardware (video effects.) This includes both "Slow Network" issues and "Insufficient CPU" issues (essentially just multiperson video.)
    So my guess is that the "Slow Network" is indeed a "bug", and will be fixed by an update from Apple.

  • External iSight cam not working with iChat

    I've got an external iSight cam that was working fine in 10.5.8 with iChat - I'm using 10.6.1 now. Now when I open iChat, the camera stays off (no green light) and iChat video preview says that another application is using the camera so it's not available, which of course, is not true.
    I've tried everything I know, but can't get it to work. The camera works with Skype, so I know it's functioning properly.
    When I checked the Connection Doctor, under Network, it says that there's something in my network setup that is preventing video chats, but I haven't changed anything since upgrading to SL. I have a direct ethernet cable to my DSL modem/router - Covad. My wife's iChat works fine with her new LogiTech camera, and she's on the same home network/router.
    Message was edited by: Macaroni108

    Opps,
    My head read that as MacBook Pro. Sorry.
    Try Restarting the computer whilst Holding done the Apple (CMD)+ALT (OPTION)PR Keys until you have heard three start up Bongs.
    Chax is an iChat Add-on.
    Different version have done different things in the different iChat Versions.
    There is only a Alpha test version of the one for Snow Leopard.
    The iChat 4 version does not work in Snow Leopard/iChat 5 and that was why I was asking.
    7:43 PM Monday; September 14, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Isight Camera not working in Ichat, but green light on...

    Hi All, the greenlight in my Ichat stays on all the time. And when I log in to use ichat or skype the video peolple on the other end cannot see me, but I can see them.
    What can I do?

    Well, this is the answer! I just did a hard restart by force quiting it all. You do this by holding down the power button. Thought I better post in case someone else has the same problem.

  • Isight camera not working after the last update

    After reboot of the last OS update
    Isight camera not working...
    i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
    just to give you a recap of what i've tried so far:
    * restarting (obviously)
    * resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
    * just shutting down my computer and taking the battery out for several hours
    any Help pls
    because i mast to use it as soon as possible in a conference

    *A few suggestions.........*
    Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
    my isight camera is not working-not recognized with photo booth or ichat
    To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

  • Isight is not working on ichat and skype, however will work on photo booth and imovie.

    My isight will not work on ichat or skype, saying that there is no camera connected. isight will work in photo booth and imovie. It shows up in the system profiler. Have tried resetting SMC. Help?

    (1) Here is how I would proceed to isolate the underlying problem that requires corrective action.
    • Shut down everything.
    • Then restart modem and allow its self-test to complete.
    • Then restart router or wireless access point (if you have them) and allow self-test to complete.
    • Then restart Mac.
    • Use  > Software Update... (Update your Apple software if not current.)
    • Then test Photo Booth or iMovie with no other apps else running to ensure they still work.
    • Then quit your test app and try iChat with no other apps else running.
    • If iChat works, quit iChat and try Skype with no other apps else running.
    (2) If iChat works but Skype does not,
    • Verify that you are using the latest version of Skype that is compatible with your OS X (10.5.8) Mac.
    • Update if necessary.
    • Then test Skype again with no other apps else running.
    • If Skype problems remain but your camera works with everything else, Skype's comprehensive support system should best be able to help you use their product with your system.
    Start here:  https://support.skype.com/
    Or, click this link for help specifically related to Mac video calls.
    You can also search or post for help with your problem in Skype's dedicated Skype Discussions for Mac.  The Skype users who post there may have already solved the same problem.
    If nothing else works, you can even sign in and ask for email help directly from Skype's Technical Support people.
    (3) If you still have trouble with more than one app, you may need to use Disk Utility to:
    • repair permissions,
    • repair your disk,
    • or even reinstall Mac OS.
    If you reinstall OS X 10.5, use the Mac OS X 10.5.8 Combo Update to return to the latest version in one update step.
    Message was edited by: EZ Jim
    Mac OSX 10.7.4

  • Built in isight camera not working with flash

    My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

    zeppelinfan1234 wrote:
    I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
    Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
    For your symptoms with this system, I suggest you do the following:
    (1) Apply the 10.5.8 Combo Update using the following process:
      • Backup your Mac and turn off Time Machine
      • Disconnect peripherals and restart Mac
      • Use Disk Utility to repair permissions
      • Download and install
       http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
      • Repair permissions again immediately following the restart that finishes the update.
      • Test whether Flash works for you now.
     (• Turn Time Machine on later when you are satisfied that the update worked.)
    (2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
      http://get.adobe.com/flashplayer/otherversions/
    Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • ISight suddenly not working in iChat

    Hi,
    My iSight has always worked and i've never had a problem until just now. I just got off a Skype video call with a friend on a PC. my iChat was running and now I realize that it only has the 'phone' icon next to my picture. I checked the preferences and it says:
    'There is no camera attached to this computer'
    I went on several posts but couldn't find the exact problem.
    i checked the system profiler and the in the USB Device Tree my iSight appears.
    I then checked in the Console and I got this message:
    1/14/11 12:36:19 PM iChat[2617] No iChat delegate set for vccLocalVideoError
    I have of course tried restarting iChat. I also deleted com.apple.iChat.playlist and re-signed in to no avail.
    Kind of out of ideas now.
    Thanks for your help.

    bizeulg wrote:
    I have the exact same problem. My external iSight which worked well till last week suddenly only shows a phone icon in iChat. In Skype, it tells me there is no Camera as in iChat. The problem remains the same whether I quit or not Skype...
    On my MacBook Pro and its internal iSight there is no problem...
    Message was edited by: bizeulg
    I think that your external iSight problem is different from the inbuilt iSight problem
    posted by the OP.
    However, if you still believe that your problem is EXACTLY the same as Niklass posts, follow the suggestions Ralph offers to solve that one.
    Otherwise,
    (1) follow the suggestions here to determine if your external iSight has failed:
      http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    (2) If you cannot get your external iSight working with those suggestions, and if you do not have access to a local Apple Service Technician who can repair it, other repair options are shown here:
      http://www.apple.com/support/isight/service/
    (3) If you need to replace your external iSight, some alternatives are here:
      http://www.mac-compatible-web-cam.com/
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • ISight Camera not working after Leopard install

    On my 1st gen Intel 20" iMac, after the Leopard upgrade -- which went very smoothly -- my iSight camera no longer works. I have tried it in Photo Booth and iChat Video and it is the same in each, so it is the camera, apparently, not the application using it.
    In the self-viewing screen on my iMac, I see myself for just a second or so, then I fade out quickly and there is nothing to see but black. If I shine a desk lamp in my face, then I can just barely see the outline of my image but the picture is mostly black. It seems like an exposure problem: the camera seems to adjust, shutting down as though I am very brightly lit but since I am not, it produces only a black picture.
    I also have a 1st gen Intel white MacBook that I have also upgraded to Leopard. The iSight camera seems to work just fine on that computer. I tried out the video in Photo Booth and it worked great.
    Any ideas?

    Hi,
    I too am having the same problem, and I'm using the old school iSight camera and immediately after installing Leopard, it won't work. I can't even power up the camera. It will power up for about 3 seconds then power down as fast as the little green light came on. It was fine about an hour before the 10.5 install. I powered down and unplugged everything for about 10 mins. then plugged it all back in, and still not working. So I am back to the drawing board trying to sort this out. If anyone has anymore thoughts on this, pls. chime in. All the suggestions seem to work for you folks after a little tweak. I even booted into OF mode and reset-nvram and reset-all for kicks to give it an even fresher start.
    thanks!

  • External iSight Camera not working after update installed?

    a couple of weeks ago I turned on iChat and up popped a window that said i needed to update the (external) iSight camera i had plugged into my minimac (firewire). followed the instructions and did just that. little greenlight glowed happily, rotated lens and opened iChat--little green light blinked off and then iChat showed that the camera was not turned on. tried turning it on and off by rotating the lens, unplugging firewire and also restarted computer...no change. looked for update to firmware and downloaded 1.0.3, only to be told it does not work with OS 10.4 (bummer).
    had a back up camera, plugged that in and no problems...trouble is roomate recently got the pop-up screen when he was using it and, thinking he was doing me a favor, 'updated'...so now have 2 cameras that do not work and no answers to be found on the posts or the apple support site.
    any ideas?

    Welcome to Discussions, johnboysf
    (1) Assuming you are not ANY having other problems with your Macs and that your Mac OS X Maintenance is up to date, you can concentrate on the iSight part of your system(s).
    Restart your Mac with no unnecessary peripherals connected and try the suggestions here:
      http://docs.info.apple.com/article.html?artnum=93240
    (2) If your iSight still does not work with any app, check for Possible hardware or software conflicts with iSight.
    (3) I cannot tell whether your mini is an iNtel or PPC. Apply the appropriate Combo Updater as follows if you still have the problem:
    • Backup your Home Folder, or at very least, your important files.
    • Repair permissions. (Click here if you need help.)
    • For PPC, download and apply the Mac OS X 10.4.10 Combo Update (PPC).
    • For iNtel, download and apply the Mac OS X 10.4.10 Combo Update v1.1 (Intel).
    • Finish with another Permissions Repair, and then check your iSight again.
    Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
    (4) If your problem persists after trying all of the above, the problem may be with your iSight itself. The fact that you got that notification after you had previously been using your iSight successfully under OS 10.4.x, and the fact that the updater ran for you and your roommate under OS 10.4.x, makes me think there may be something wrong with your iSights. The Tiger (10.4.x) OS includes all the necessary earlier update (including iSight Firmware 1.0.3) and installs the Firmware update if necessary at the time you installed Tiger or first connected your iSight. Therefore, the Firmware update should be unnecessary and should not have been identified by Software Update... as being needed (unless someone has improperly thrown away some OS X files.)
    As you note, iSight Firmware 1.0.3 will not run except on Mac OS X v10.3.7-10.3.9 (or, it now seems, if something is wrong.) If you have access to a Firewire-equipped Mac that is using one of these OSs, you can try applying the update to your iSights using that Mac.
    (5) If you cannot find a Mac that is still using Panther, or if applying the update does not resolve your problem, contact your Apple Authorized Service Provider for professional service. Ask your AASP if he wants to see your Macs, too, to check whether their software has been modified or damaged.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5)  External iSight

  • Macbook Retina Display isight camera not working - graphics freeze

    I recently bought a base MBP-RD and can say that I am overall impressed with it, though I have found a couple issues already. One of them is related to the iSight camera which for some reason doesn't work. The camera appears in system profiler, but it shows as "camera not detected" when trying to launch application like iChat, Skype, FaceTime, etc. I already tried re-installing OSX Lion, and still not working.
    I have also found some weird issue with graphics where it freezes a series of frames when going to Mission Control or App Expose.
    I am returning this computer as there are other things I didn't like, but overall pretty impressive (no LED battery indicator, no Lock slot, no sleep light indicator...)
    Please reply if you have same issue.

    i think Macbook Pro is a good computer but plenty of issues, since day one.
    i received my computer with space bar cracked. i figured this out @ night when the keyboard backlight was.
    then my USB port ***** on it, it does not read all.
    even after the update no go the USB port does not  work all the time with the apple usb to ethernet adapter.
    while if i install vmware it does work on the windows in VMware environement.
    my Camera also is not being detected    how can i fix the camera.
    please do not tell me go to genius bar, they are all but not genius, if you have issue they ask you to format they do not know how to troubleshoot.
    Conclusion problem with macbok retina version:
    isight Camera wont detect
    USB port Does not work with all devices.
    Space Bar key broken from manufacture.

  • ISight camera not working with Myspace Karaoke

    Hi guys! I searched the forum and couldn't seem to find anything on this...I'm trying to upload an audition for Glee on Myspace using my iSight camera. The audio seems to be recording fine, but when I try to play back what I've just recorded there is no video. I checked the settings and everything seems to be connected fine but it's still not working. Any idea why this is happening or what I can do to fix it? Thanks so much!

    Hi,
    A look here show me the Video shown is Flash based.
    This would make me guess that the Record feature is also Flash based.
    This should give you access to a Settings panel that you will have to tick the Allow Box and possibly select the camera from as well (icon to the lower right)
    An Internal iSight is a USB camera.
    7:50 PM Thursday; April 15, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • ISight Camera not working with Skype

    Hi,
    2 days ago my kids were skyping and everything was fine, then I turned off my iMac and the next day Skype wouldn't use my iSight Camera. In the settings it shows that it is using the iSight Camera but not picture! I made an update from skype but it didnt help. I restarted my computer, reinstalled skype nothing.
    I am not a big pro with computers, so if you have an explanation, PLEASE be detailed in your explanation.
    Thanks
    Lucy

    I know this is an older thread BUT I've been dealing with this issue for the past four days and this is what I found... (perhaps if it helps another person....)
    Assuming you've already checked while on a Skype video call that your camera isn't turned off...
    FIRSTLY
    Open Skype Preferences to verify your settings.
    (prob in your downloads, applications folder or on your desktop)
    Then at the top your screen, next to the Apple Icon you should see Skype:
    Select Skype, then scroll down to Preferences.  Verify settings.
    (Mine, for example, under the "Calls" Tab was set to autoanswer so I can check on
    my dogs while away and tell them to get off the couch!)
    SECONDLY
    Make sure another apple app isn't hijacking your camera.
    Open Finder, Devices, Applications, then look for IChat
    Once open, Select iChat and scroll down to preferences.
    (For my settings, I don't use IChat SO I changed the "default IM application" to Skype,
    under General settings tab.)
    Select the green Audio/Video Tab
    and uncheck "Open IChat when external camera is on"
    THIRDLY
    I verified that all other Apps using the camera weren't open.  My insight camera worked
    when I opened Photobooth,  IChat, Facetime and ICamSource (a monitoring program)
    - just didn't work with Skype!
    From Desktop, go to Apple Icon, select "Force Quit Finder", then scroll down and
    close everything that uses the camera. 
    FINALLY
    From Desktop, go to Apple Icon and select Restart (pic same as above).
    Upon restarting, once the screen blanks out hold down the following keys all at once:
    Option, Command and P and R keys.
    For me, I heard the computer "restart song" chime twice before letting go.
    (PRAM and NVRAM settings)
    http://http://support.apple.com/kb/ht1379
    I tried a Skype video call from an Iphone to Mac Desktop and it went through just fine!

  • ISight camera not working on MacBook

    When I turned on my MaBook the green light next to the iSight camera turns on and when I open PhotoBooth it shows a blank screen. I tried to restart but the green light stayed on. Any suggestions on how I can fix this?

    radarina wrote:
    When I turned on my MaBook the green light next to the iSight camera turns on and when I open PhotoBooth it shows a blank screen. I tried to restart but the green light stayed on. Any suggestions on how I can fix this?
    Welcome to Discussions, radarina
    The restart was a the best first step.
    Next, try all relevant suggestions from:
      http://support.apple.com/kb/HT2090
    If your iSight problem still occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.
    However, if your built-in iSight still does not work after carefully following all the suggestions in the "How to Troubleshoot iSight" article, and if iSight does not show as a USB hardware device in your Mac's System Profiler, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
    We will watch for your status update.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • ISight Camera not working of flash based sites even after adobe update.

    Hi there everyone. Hope you can help me out.
    I've been trying to use my webcam on chatroulette, which as i take it is a flash based site, and the isight camera would not work.
    So I downloaded the adobe flashplayer upgrade, hoping to fix this problem.
    Now when i go to the site, the isight light turns green, but then safari crashes. And the only options i have are to try again, or send an error report.
    ( both of which I've done )
    Any suggestions would be greatly appreciated in this matter.
    Thanks so much.
    Jan.

    mykellex wrote:
    So I downloaded the adobe flashplayer upgrade, hoping to fix this problem.
    Adobe strongly recommends that you first uninstall any previous version of Flash Player, using the uninstaller:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
    Follow the instructions closely, such as closing ALL applications first before installing.
    Repair permissions and restart your computer after the installation is completed.
    Was any of the above done?

Maybe you are looking for

  • SQL Error: ORA-00936: missing expression

    Hello all, sorry i can't speak english very well i would like to know what's wrong on my code CREATE TABLE MOB (MOBILE VARCHAR2(20)); Insert into EXPORT_TABLE (MOBILE) values ('0124873214'); Insert into EXPORT_TABLE (MOBILE) values ('0184873214'); In

  • My Iphone is in recovery mode, but Itunes isnt recognising the phone

    My phone is in recovery mode. I think my husband detached it from the USB when it was near the end of a big sync to answer a call. It was the first time I had plugged the phone into my PC to add all my music. I had the phone replaced at an Istore whe

  • Really annoying Nokia 500 WLAN problem

    I'm with Three in the UK, to use their Planet3 service I have to connect to the website by using the 3G connection, but whatever settings I use the 500 turns on the WLAN and connects through that so I can't access Planet3 - I've gone through all the

  • How to Consume Forecast using Legacy Orders

    Hello All- We are currently planning on uploading sales order demand from the legacy system until OM is up and running. The supply chain piece is going live on Oracle therefor, we need to find a way to consume the forecast. How can this be done? How

  • Dreamweaver CS6 missing 'border' in properties

    Dreamweaver CS5 and below contained the 'Border' property in the Properties pane. But in CS6 it does not contain Border. I found this extremely useful, and easy to set my border quickly on my images. Is there a way to turn the function back on so it